[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[UDUNITS #RFR-137108]: How can I install the udunits-1.12.11?



zjuyanlibin,

> I am encountering some difficulties in installing the udunits-1.12.11, PLZ 
> give me a hand.
> 
> 1.  The standard output of the command "uname -a".
> Linux TC5000 2.6.16.60-0.21-smp #1 SMP Tue May 6 12:41:02 UTC 2008 x86_64 
> x86_64 x86_64 GNU/Linux
> Linux version 2.6.16.60-0.21-smp (geeko@buildhost) (gcc version 4.1.2 
> 20070115 (SUSE Linux)) #1 SMP Tue May 6 12:41:02 UTC 2008
> 
> 2.  The standard and error output of the configure script.
> ./configure --prefix=/home3/yanlb/soft/udunits-1.12.11/ > config.log

Because the configure(1) script creates the file "config.log" itself and writes 
into it, the output of the script should not be redirected into that file. The 
file "configure.log" should be used instead. For example

    ./configure ... >configure.log  2>&1

> configure.in file
...
> 3.  The file "config.log".

Looks OK.

> 4.  The standard and error output of the "make" command.
> +++++++++++++++++++++++++
> make: Warning: File `Makefile' has modification time 1.5e+03 s in the future
> 
> making `all' in directory 
> /home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/port
> 
> make[1]: Entering directory 
> `/home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/port'
> make[1]: Warning: File `Makefile' has modification time 1.5e+03 s in the 
> future
> 
> making `all' in directory 
> /home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/port/misc
> 
> make[2]: Entering directory 
> `/home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/port/misc'
> make[2]: Warning: File `Makefile' has modification time 1.5e+03 s in the 
> future
> ar rcuv libudport.a uddummy.o
> case "" in \
> '') ;; \
> *)  ar rucv libudport.a ;; \
> esac
> ranlib libudport.a
> make[2]: warning:  Clock skew detected.  Your build may be incomplete.
> make[2]: Leaving directory 
> `/home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/port/misc'
> 
> returning to directory 
> /home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/port
> 
> 
> making `all' in directory 
> /home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/port/cfortran
> 
> make[2]: Entering directory 
> `/home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/port/cfortran'
> make[2]: Warning: File `Makefile' has modification time 1.5e+03 s in the 
> future
> make[2]: Nothing to be done for `all'.
> make[2]: warning:  Clock skew detected.  Your build may be incomplete.
> make[2]: Leaving directory 
> `/home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/port/cfortran'
> 
> returning to directory 
> /home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/port
> 
> make[1]: warning:  Clock skew detected.  Your build may be incomplete.
> make[1]: Leaving directory 
> `/home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/port'
> 
> returning to directory 
> /home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src
> 
> 
> making `all' in directory 
> /home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/lib
> 
> make[1]: Entering directory 
> `/home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/lib'
> make[1]: Warning: File `Makefile' has modification time 1.5e+03 s in the 
> future
> icc -c -g -O2 -I../port/misc -I../port/cfortran 
> -DUT_DEFAULT_PATH='"/home3/yanlb/soft/udunits-1.12.11//etc/udunits.dat"'  
> utlib.c
> ../port/cfortran/cfortran.h(133): catastrophic error: #error directive: 
> "cfortran.h:  Can't find your environment among:    - MIPS cc and f77 2.0. 
> (e.g. Silicon Graphics, DECstations, ...)         - IBM AIX XL C and FORTRAN 
> Compiler/6000 Version 01.01.0000.0000         - VAX   VMS CC 3.1 and FORTRAN 
> 5.4.                                      - Alpha VMS DEC C 1.3 and DEC 
> FORTRAN 6.0.                               - Alpha OSF DEC C and DEC Fortran 
> for OSF/1 AXP Version 1.2              - Apollo
> DomainOS 10.2 (sys5.3) with f77 10.7 and cc 6.7.                - CRAY        
>                                                            - NEC SX-4 
> SUPER-UX                                                      - CONVEX        
>                                                          - Sun                
>                                                     - PowerStation Fortran 
> with Visual C++                                   - HP9000s300/s700/s800 
> Latest test with: HP-UX A.08.07 A
> 9000/730        - LynxOS: cc or gcc with f2c.                                 
>            - VAXUltrix: vcc,cc or gcc with f2c. gcc or cc with f77.           
>       -            f77 with vcc works; but missing link magic for f77 I/O.    
>  -            NO fort. None of gcc, cc or vcc generate required names.    - 
> f2c    : Use #define    f2cFortran, or cc -Df2cFortran                 - NAG 
> f90: Use #define NAGf90Fortran, or cc -DNAGf90Fortran              - Absoft 
> UNIX F77: Use #define
> AbsoftUNIXFortran or cc -DAbsoftUNIXFortran     - Absoft Pro Fortran: Use 
> #define AbsoftProFortran     - Portland Group Fortran: Use #define pgiFortran"
> #error "cfortran.h:  Can't find your environment among:\
> ^
> 
> compilation aborted for utlib.c (code 4)
> make[1]: *** [utlib.o] Error 4
> make[1]: Leaving directory 
> `/home3/yanlb/loveclim/source/udunits-1.12.11/udunits-1.12.11/src/lib'
> make: *** [lib/all] Error 1

The configure(1) script wasn't told what argument-passing
conventions to use when compiling C functions that are callable
from Fortran routines.  Please try the following:

    1.  Go to the top-level source-directory.

    2.  Execute the command "make distclean".

    3.  Ensure that the environment variable CPPFLAGS contains the
        string "-Df2cFortran" (or whatever macro definition is
        appropriate for your Fortran compiler), e.g.,

            CPPFLAGS=-Df2cFortran; export CPPFLAGS

        The set of potential macros can be found in the examples of
        the file INSTALL in the top-level source-directory.

    4.  Execute the "configure" script.  Redirect both the
        standard output and standard error streams to the file
        "configure.log".

    5.  Execute the command "make".  Redirect both the standard
        output and standard error streams to the file "make.log".

    6.  Execute the command "make test".  Redirect both the
        standard output and standard error streams to the file
        "test.log".

    7.  Execute the command "make install".  Redirect both the
        standard output and standard error streams to the file "install.log".

> +++++++++++++++++++++++++
> 
> Thanks a lot.
> 
> Regards,
> Libin Yan
> 
> 
> 
> 
> zjuyanlibin
Regards,
Steve Emmerson

Ticket Details
===================
Ticket ID: RFR-137108
Department: Support UDUNITS
Priority: Normal
Status: Closed