[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
20030331: Help with udunits and grib2nc on RH8
- Subject: 20030331: Help with udunits and grib2nc on RH8
- Date: Mon, 31 Mar 2003 12:39:16 -0700
>From: "Von P. Walden" <address@hidden>
>Organization: University of Idaho
>Keywords: 200303311928.h2VJSsB2004308 UDUNITS gcc/g77 -Df2cFortran
Von,
>I'm trying to install grib2nc on my Linux laptop running RH8. I realized that
>I also need to install udunits, so I downloaded the tar file from you web
>site. It appears to be hanging up on the cfortran stuff. Apparently,
>configure doesn't recognize that I already have g77/f77 on my machine.
>
>I'm a newbie at using configure, so I'm not sure how to inform it about g77.
>I tried putting FC='g77' in the CUSTOMIZE file, but that didn't work.
>
>Any suggestions on how I can get udunits installed, so I can eventually
>install grib2nc? Any help would be much appreciated.
The following information is contained in the INSTALL file that is
included in the UDUNITS distribution:
You should:
- set CPPFLAGS to '-Df2cFortran'
- do a 'make distclean'
- rerun configure
- then try rebuilding UDUNITS
Please let us know if this doesn't get you going.
>Thanks,
>
>Von
>
>--
>Von P. Walden
>University of Idaho
>Moscow, ID 83844-3021
>208-885-5058
>address@hidden
>
>--Boundary_(ID_ACfmMdgRAWMlX/rhrZJfEg)
>Content-type: application/x-shellscript; name=config.status
>Content-transfer-encoding: 7bit
>Content-disposition: attachment; filename=config.status
>
>#! /bin/sh
# Generated automatically by configure.
># Run this file to recreate the current configuration.
># This directory was configured as follows,
># on host weddell:
>#
># ./configure
>#
># Compiler output produced by configure, useful for debugging
># configure, is in ./config.log if it exists.
>
>ac_cs_usage="Usage: ./config.status [--recheck] [--version] [--help]"
>for ac_option
>do
> case "$ac_option" in
> -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
> echo "running ${CONFIG_SHELL-/bin/sh} ./configure --no-create --no-recurs
> ion"
> exec ${CONFIG_SHELL-/bin/sh} ./configure --no-create --no-recursion ;;
> -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
> echo "./config.status generated by autoconf version 2.9"
> exit 0 ;;
> -help | --help | --hel | --he | --h)
> echo "$ac_cs_usage"; exit 0 ;;
> *) echo "$ac_cs_usage"; exit 1 ;;
> esac
>done
>
>ac_given_srcdir=.
>
>trap 'rm -fr Makefile
> lib/Makefile
> udunits/Makefile
> perl/Makefile.PL
> port/master.mk port/Makefile port/misc/Makefile port/cfortran/Makefile port/
> misc/udposix.h port/misc/stdarg.h port/misc/stddef.h port/misc/stdlib.h port/
> misc/string.h port/misc/time.h port/misc/limits.h port/misc/search.h conftest
> *; exit 1' 1 2 15
>
># Protect against being on the right side of a sed subst in config.status.
>sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\&%]/\\&/g;
> s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF
>/^[ ]*VPATH[ ]*=[^:]*$/d
>
>s%@CFLAGS@%-O%g
>s%@CPPFLAGS@%%g
>s%@CXXFLAGS@%%g
>s%@DEFS@%-DHAVE_CONFIG_H%g
>s%@LDFLAGS@%%g
>s%@LIBS@%%g
>s%@exec_prefix@%/usr/local/unidata%g
>s%@prefix@%/usr/local/unidata%g
>s%@program_transform_name@%s,x,x,%g
>s%@bindir@%${exec_prefix}/bin%g
>s%@sbindir@%${exec_prefix}/sbin%g
>s%@libexecdir@%${exec_prefix}/libexec%g
>s%@datadir@%${prefix}/share%g
>s%@sysconfdir@%${prefix}/etc%g
>s%@sharedstatedir@%${prefix}/com%g
>s%@localstatedir@%${prefix}/var%g
>s%@libdir@%/home/vonw/tmp/udunits-1.11.7/src/lib%g
>s%@includedir@%${prefix}/include%g
>s%@oldincludedir@%/usr/include%g
>s%@infodir@%${prefix}/info%g
>s%@mandir@%${prefix}/man%g
>s%@CONFIG_FILES@% port/master.mk port/Makefile port/misc/Makefile port/cfortra
> n/Makefile%g
>s%@PORT_SUBDIRS@% misc cfortran%g
>s%@PORT_MANIFEST@% stdarg.h.in udposix.h.in udalloc.c udalloc.h stddef.h.in co
> nfig.c stdlib.h.in atexit.c strerror.c strstr.c string.h.in memmove.c difftim
> e.c strftime.c time.h.in limits.h.in search.h.in tsearch.c tfind.c tdelete.c
> twalk.c search-node.h%g
>s%@PORT_ALL@% misc/all cfortran/all%g
>s%@PORT_CLEAN@% misc/clean cfortran/clean%g
>s%@PORT_DISTCLEAN@% misc/distclean cfortran/distclean%g
>s%@PORT_INSTALL@% misc/install cfortran/install%g
>s%@prog@%%g
>s%@WHATIS@%whatis%g
>s%@MAKEWHATIS_CMD@%%g
>s%@CC@%gcc%g
>s%@OPSYS@%linux%g
>s%@CC_MAKEDEPEND@%gcc -M%g
>s%@CPP@%gcc -E%g
>s%@UD_NO_CONST@%%g
>s%@UD_NO_VOLATILE@%%g
>s%@UD_NO_SIGNED@%%g
>s%@UD_NO_PROTOTYPES@%%g
>s%@UD_NO_HASH@%%g
>s%@UD_NO_HASHHASH@%%g
>s%@UD_NO_VOIDSTAR@%%g
>s%@AR@%ar%g
>s%@TARFLAGS@%-chof%g
>s%@RANLIB@%ranlib%g
>s%@FTPBINDIR@%/home/ftp/pub/binary/dummy_system%g
>s%@LIBOBJS@%%g
>s%@PORT_HEADERS@%%g
>s%@PORT_CPP_LDM@%%g
>s%@LD_UDPORT@%-L/home/vonw/tmp/udunits-1.11.7/src/port/misc -ludport%g
>s%@NEQN@%neqn%g
>s%@TBL@%tbl%g
>s%@LD_UDUNITS@%-L/home/vonw/tmp/udunits-1.11.7/src/lib -ludunits%g
>s%@LD_YACC@%%g
>s%@LD_MATH@%-lm%g
>s%@CFORTRAN_TYPE@%Standard%g
>s%@FFLAGS@%%g
>s%@UD_NO_ATEXIT_DECL@%%g
>s%@UD_NO_GETENV_DECL@%%g
>s%@UD_NO_STRERROR_DECL@%%g
>s%@UD_NO_STRCHR_DECL@%%g
>s%@UD_NO_STRCPY_DECL@%1%g
>s%@UD_NO_STRRCHR_DECL@%1%g
>s%@UD_NO_STRNCPY_DECL@%%g
>s%@UD_NO_STRTOK_DECL@%%g
>s%@UD_NO_STRSTR_DECL@%1%g
>s%@UD_NO_MEMMOVE_DECL@%%g
>s%@UD_NO_DIFFTIME_DECL@%%g
>s%@UD_NO_STRFTIME_DECL@%%g
>s%@UD_NO_TSEARCH_DECL@%%g
>s%@UD_NO_TFIND_DECL@%%g
>s%@UD_NO_TDELETE_DECL@%%g
>s%@UD_NO_TWALK_DECL@%%g
>s%@PERL@%perl%g
>s%@LINKTYPE@%dynamic%g
>s%@PERL_ALL@%perl/dynamic%g
>s%@PERL_TEST@%perl/test%g
>s%@PERL_INSTALL@%perl/install%g
>s%@PERL_CLEAN@%perl/clean%g
>s%@PERL_DISTCLEAN@%perl/distclean%g
>s%@PERL_MANUAL@%udunitsperl.1%g
>s%@FTPDIR@%/home/ftp/pub/udunits%g
>
>CEOF
>
>CONFIG_FILES=${CONFIG_FILES-"Makefile
> lib/Makefile
> udunits/Makefile
> perl/Makefile.PL
> port/master.mk port/Makefile port/misc/Makefile port/cfortran/Makefile"}
>for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
> # Support "outfile[:infile]", defaulting infile="outfile.in".
> case "$ac_file" in
> *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
> ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
> *) ac_file_in="${ac_file}.in" ;;
> esac
>
> # Adjust relative srcdir, etc. for subdirectories.
>
> # Remove last slash and all that follows it. Not all systems have dirname.
> ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
> if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
> # The file is in a subdirectory.
> test ! -d "$ac_dir" && mkdir "$ac_dir"
> ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
> # A "../" for each directory in $ac_dir_suffix.
> ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
> else
> ac_dir_suffix= ac_dots=
> fi
>
> case "$ac_given_srcdir" in
> .) srcdir=.
> if test -z "$ac_dots"; then top_srcdir=.
> else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
> /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;
> ;
> *) # Relative path.
> srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
> top_srcdir="$ac_dots$ac_given_srcdir" ;;
> esac
>
> echo creating "$ac_file"
> rm -f "$ac_file"
> configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%
> '` by configure."
> case "$ac_file" in
> *Makefile*) ac_comsub="1i\\
># $configure_input" ;;
> *) ac_comsub= ;;
> esac
> sed -e "$ac_comsub
>s%@configure_input@%$configure_input%g
>s%@srcdir@%$srcdir%g
>s%@top_srcdir@%$top_srcdir%g
>" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
>fi; done
>rm -f conftest.subs
>
># These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
># NAME is the cpp macro being defined and VALUE is the value it is being given
> .
>#
># ac_d sets the value in "#define NAME VALUE" lines.
>ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
>ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
>ac_dC='\3'
>ac_dD='%g'
># ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
>ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
>ac_uB='\([ ]\)%\1#\2define\3'
>ac_uC=' '
>ac_uD='\4%g'
># ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
>ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
>ac_eB='$%\1#\2define\3'
>ac_eC=' '
>ac_eD='%g'
>
>CONFIG_HEADERS=${CONFIG_HEADERS-"port/misc/udposix.h port/misc/stdarg.h port/m
> isc/stddef.h port/misc/stdlib.h port/misc/string.h port/misc/time.h port/misc
> /limits.h port/misc/search.h"}
>for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
> # Support "outfile[:infile]", defaulting infile="outfile.in".
> case "$ac_file" in
> *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
> ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
> *) ac_file_in="${ac_file}.in" ;;
> esac
>
> echo creating $ac_file
>
> rm -f conftest.frag conftest.in conftest.out
> cp $ac_given_srcdir/$ac_file_in conftest.in
>
> cat > conftest.frag <<CEOF
>${ac_dA}OS_NAME${ac_dB}OS_NAME${ac_dC}Linux${ac_dD}
>${ac_uA}OS_NAME${ac_uB}OS_NAME${ac_uC}Linux${ac_uD}
>${ac_eA}OS_NAME${ac_eB}OS_NAME${ac_eC}Linux${ac_eD}
>${ac_dA}OS_MAJOR${ac_dB}OS_MAJOR${ac_dC}2${ac_dD}
>${ac_uA}OS_MAJOR${ac_uB}OS_MAJOR${ac_uC}2${ac_uD}
>${ac_eA}OS_MAJOR${ac_eB}OS_MAJOR${ac_eC}2${ac_eD}
>${ac_dA}UD_SYSTEM_STDARG_H${ac_dB}UD_SYSTEM_STDARG_H${ac_dC}"///usr/lib/gcc-li
> b/i386-redhat-linux/3.2/include/stdarg.h"${ac_dD}
>${ac_uA}UD_SYSTEM_STDARG_H${ac_uB}UD_SYSTEM_STDARG_H${ac_uC}"///usr/lib/gcc-li
> b/i386-redhat-linux/3.2/include/stdarg.h"${ac_uD}
>${ac_eA}UD_SYSTEM_STDARG_H${ac_eB}UD_SYSTEM_STDARG_H${ac_eC}"///usr/lib/gcc-li
> b/i386-redhat-linux/3.2/include/stdarg.h"${ac_eD}
>${ac_dA}UD_SYSTEM_STDDEF_H${ac_dB}UD_SYSTEM_STDDEF_H${ac_dC}"///usr/lib/gcc-li
> b/i386-redhat-linux/3.2/include/stddef.h"${ac_dD}
>${ac_uA}UD_SYSTEM_STDDEF_H${ac_uB}UD_SYSTEM_STDDEF_H${ac_uC}"///usr/lib/gcc-li
> b/i386-redhat-linux/3.2/include/stddef.h"${ac_uD}
>${ac_eA}UD_SYSTEM_STDDEF_H${ac_eB}UD_SYSTEM_STDDEF_H${ac_eC}"///usr/lib/gcc-li
> b/i386-redhat-linux/3.2/include/stddef.h"${ac_eD}
>CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> cat > conftest.frag <<CEOF
>${ac_dA}UD_SYSTEM_STDLIB_H${ac_dB}UD_SYSTEM_STDLIB_H${ac_dC}"///usr/include/st
> dlib.h"${ac_dD}
>${ac_uA}UD_SYSTEM_STDLIB_H${ac_uB}UD_SYSTEM_STDLIB_H${ac_uC}"///usr/include/st
> dlib.h"${ac_uD}
>${ac_eA}UD_SYSTEM_STDLIB_H${ac_eB}UD_SYSTEM_STDLIB_H${ac_eC}"///usr/include/st
> dlib.h"${ac_eD}
>${ac_dA}UD_SYSTEM_STRING_H${ac_dB}UD_SYSTEM_STRING_H${ac_dC}"///usr/include/st
> ring.h"${ac_dD}
>${ac_uA}UD_SYSTEM_STRING_H${ac_uB}UD_SYSTEM_STRING_H${ac_uC}"///usr/include/st
> ring.h"${ac_uD}
>${ac_eA}UD_SYSTEM_STRING_H${ac_eB}UD_SYSTEM_STRING_H${ac_eC}"///usr/include/st
> ring.h"${ac_eD}
>${ac_dA}UD_NO_STRCPY_DECL${ac_dB}UD_NO_STRCPY_DECL${ac_dC}1${ac_dD}
>${ac_uA}UD_NO_STRCPY_DECL${ac_uB}UD_NO_STRCPY_DECL${ac_uC}1${ac_uD}
>${ac_eA}UD_NO_STRCPY_DECL${ac_eB}UD_NO_STRCPY_DECL${ac_eC}1${ac_eD}
>${ac_dA}UD_NO_STRRCHR_DECL${ac_dB}UD_NO_STRRCHR_DECL${ac_dC}1${ac_dD}
>${ac_uA}UD_NO_STRRCHR_DECL${ac_uB}UD_NO_STRRCHR_DECL${ac_uC}1${ac_uD}
>${ac_eA}UD_NO_STRRCHR_DECL${ac_eB}UD_NO_STRRCHR_DECL${ac_eC}1${ac_eD}
>CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> cat > conftest.frag <<CEOF
>${ac_dA}UD_NO_STRSTR_DECL${ac_dB}UD_NO_STRSTR_DECL${ac_dC}1${ac_dD}
>${ac_uA}UD_NO_STRSTR_DECL${ac_uB}UD_NO_STRSTR_DECL${ac_uC}1${ac_uD}
>${ac_eA}UD_NO_STRSTR_DECL${ac_eB}UD_NO_STRSTR_DECL${ac_eC}1${ac_eD}
>${ac_dA}UD_SYSTEM_TIME_H${ac_dB}UD_SYSTEM_TIME_H${ac_dC}"///usr/include/time.h
> "${ac_dD}
>${ac_uA}UD_SYSTEM_TIME_H${ac_uB}UD_SYSTEM_TIME_H${ac_uC}"///usr/include/time.h
> "${ac_uD}
>${ac_eA}UD_SYSTEM_TIME_H${ac_eB}UD_SYSTEM_TIME_H${ac_eC}"///usr/include/time.h
> "${ac_eD}
>${ac_dA}UD_SYSTEM_LIMITS_H${ac_dB}UD_SYSTEM_LIMITS_H${ac_dC}"///usr/lib/gcc-li
> b/i386-redhat-linux/3.2/include/limits.h"${ac_dD}
>${ac_uA}UD_SYSTEM_LIMITS_H${ac_uB}UD_SYSTEM_LIMITS_H${ac_uC}"///usr/lib/gcc-li
> b/i386-redhat-linux/3.2/include/limits.h"${ac_uD}
>${ac_eA}UD_SYSTEM_LIMITS_H${ac_eB}UD_SYSTEM_LIMITS_H${ac_eC}"///usr/lib/gcc-li
> b/i386-redhat-linux/3.2/include/limits.h"${ac_eD}
>${ac_dA}UD_SYSTEM_SEARCH_H${ac_dB}UD_SYSTEM_SEARCH_H${ac_dC}"///usr/include/se
> arch.h"${ac_dD}
>${ac_uA}UD_SYSTEM_SEARCH_H${ac_uB}UD_SYSTEM_SEARCH_H${ac_uC}"///usr/include/se
> arch.h"${ac_uD}
>${ac_eA}UD_SYSTEM_SEARCH_H${ac_eB}UD_SYSTEM_SEARCH_H${ac_eC}"///usr/include/se
> arch.h"${ac_eD}
>CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> cat > conftest.frag <<CEOF
>s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
>CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> rm -f conftest.frag conftest.h
> case "$ac_file" in
> *.h|*.hh|*.H)
> echo "/* $ac_file. Generated automatically by configure. */" \
> > conftest.h
> ;;
> esac
> cat conftest.in >> conftest.h
> rm -f conftest.in
> if cmp -s $ac_file conftest.h 2>/dev/null; then
> echo "$ac_file is unchanged"
> rm -f conftest.h
> else
> rm -f $ac_file
> mv conftest.h $ac_file
> fi
>fi; done
>
> CC="gcc"
>
> #
># Create a script to accomplish the post processing.
>#
>cat << UD_EOF_CONFTEST_C > conftest.c
>#include <stdio.h>
>main()
>{
> return readsub((char*)NULL) ? 0 : 1;
>}
>readsub(inpath)
> char *inpath;
>{
> char buf[2048], path[1024];
> FILE *fp = inpath == NULL
> ? stdin
> : fopen(inpath, "r");
> if (fp == NULL) {
> (void) perror(inpath);
> return 0;
> }
> buf[sizeof(buf)-1] = 0;
> while (fgets(buf, sizeof(buf), fp) != NULL) {
> if (sscanf(buf, "include%*[ \t]%s", path) == 1) {
> if (!readsub(path))
> return 0;
> } else {
> (void) fputs(buf, stdout);
> }
> }
> return 1;
>}
>UD_EOF_CONFTEST_C
>if eval $CC -o conftest ${CFLAGS-} ${CPPFLAGS-} ${LDFLAGS-} conftest.c; then
> conftest=`pwd`/conftest
> case "${CONFIG_FILES-}" in
> '')
> ;;
> *)
> for file in ${CONFIG_FILES-}; do
> echo 1>&2 "expanding \`include's in file \`$file'"
> sd=`pwd`/`echo $file | sed 's,[^/]*$,,'`
> base=`basename $file`
> (cd $sd && $conftest < $base > conftest.mk &&
> mv conftest.mk $base) || exit 1
> done
> ;;
> esac
>fi
>rm conftest conftest.c
>
>exit 0
>
>--Boundary_(ID_ACfmMdgRAWMlX/rhrZJfEg)
>Content-type: text/x-makefile; charset=us-ascii; name=Makefile
>Content-transfer-encoding: 7BIT
>Content-disposition: attachment; filename=Makefile
>
># Generated automatically from Makefile.in by configure.
># Makefile for the Unidata units package, UDUNITS.
>#
># $Id: Makefile.in,v 1.4 1998/10/21 19:11:14 steve Exp $
>
>.POSIX:
>
>PACKAGE = udunits
>
>SUBDIRS = port lib udunits
>SUBDIR_TARGETS = port/all port/install port/clean port/distclean \
> lib/all lib/install lib/clean lib/distclean \
> perl/dynamic perl/test perl/install perl/clean \
> perl/distclean \
> udunits/all udunits/test udunits/install udunits/clean \
> udunits/distclean
>MANIFEST = COPYRIGHT CUSTOMIZE INSTALL Makefile.in ORIGIN \
> README RELEASE_NOTES VERSION configure configure.in \
> aclocal.m4 \
> perl/MANIFEST \
> perl/Makefile.PL.in \
> perl/UDUNITS.pm \
> perl/UDUNITS.xs \
> perl/typemap \
> perl/udunitsperl.1 \
> perl/test.pl
>
>MANUALS = udunitsperl.1
>GARBAGE = $(MANUALS)
>PERL = perl
>
>all: port/all lib/all udunits/all perl/dynamic
>
>test: FORCE udunits/test perl_test
>
>install: port/install lib/install udunits/install \
> perl/install installed_manuals
>
>clean: port/clean lib/clean udunits/clean perl/clean
>
>distclean: port/distclean lib/distclean \
> udunits/distclean perl/distclean
>
>perl_test: perl/dynamic
> @case "perl/test" in \
> '') ;; \
> *) \
> case dynamic in \
> static) \
> set -x; \
> cd perl; \
> ./perl -I . test.pl; \
> set +x; \
> ;; \
> *) \
> $(MAKE) $(MFLAGS) perl/test; \
> ;; \
> esac \
> ;; \
> esac
>
>$(MANUALS) dummy:
> ln -s perl/$(MANUALS) .
>
>perl/dynamic dummy: perl/Makefile
>perl/test dummy: perl/Makefile
>perl/install dummy: perl/Makefile
>perl/clean dummy: perl/Makefile
>perl/distclean dummy: perl/Makefile
>
>perl/Makefile: perl/Makefile.PL
> -cd perl && $(PERL) Makefile.PL
>
>install: whatis
>uninstall:
> rm -f $(MANDIR)/$(WHATIS)
>
># This is the master makefile. It contains general rules.
>#
># $Id: master.mk.in,v 1.43 1998/10/29 22:25:41 steve Exp $
>
>
>.SUFFIXES:
>.SUFFIXES: .so .o .S .ln .i .c .fc .f .F .cc .l .y .cdl .nc .sh
>
>############################################################################
># General Macros:
>############################################################################
>prefix = /usr/local/unidata
>exec_prefix = /usr/local/unidata
>AR = ar
>CC = gcc
>CPP = gcc -E
>CC_MAKEDEPEND = gcc -M
>CXX = @CXX@
>FC = @FC@
>LINT = lint
>LINTFLAGS = -u
>MAKEINFO = @MAKEINFO@
>NCDUMP = @NCDUMP@
>NCGEN = @NCGEN@
>NEQN = neqn
>OS = linux
>SHELL = /bin/sh
>TBL = tbl
>WHICH = @WHICH@
>
>
>
>############################################################################
># Recursive make(1)s in Subdirectories:
>############################################################################
>
>subdir_dummy_target $(SUBDIR_TARGETS):
> @echo ""
> @dir=`echo $@ | sed 's,/.*,,'`; \
> target=`echo $@ | sed "s,$$dir/,,"`; \
> cd $$dir && \
> echo "making \`$$target' in directory `pwd`" && \
> echo "" && \
> $(MAKE) $(MFLAGS) \
> prefix=$(prefix) exec_prefix=$(exec_prefix) \
> $$target || exit 1
> @echo ""
> @echo "returning to directory `pwd`"
> @echo ""
>
>subdirs/all \
>subdirs/test \
>subdirs/install \
>subdirs/clean \
>subdirs/distclean: FORCE
> @case "$(SUBDIRS)" in \
> '') ;; \
> *) filename=`echo $@ | sed 's:.*/::'`; \
> targets=`echo $(SUBDIRS) | tr ' ' '\012' | \
> sed 's:$$:/'$$filename':'`; \
> $(MAKE) $$targets;; \
> esac
>
>
>############################################################################
># Compilation:
>############################################################################
>FORTC = @FORTC@
>
># Compile C++ code.
>.cc.o:
> $(CXX) -c $(CXXFLAGS) $(CXXCPPFLAGS) $<
>
># Compile FORTRAN code.
>#
>.f.o:
> $(FC) -c $(FFLAGS) $<
>.F.o:
> ln -s $< $*.c && \
> ($(CPP) -DUD_FORTRAN_SOURCE $(CPPFLAGS) $*.c >$*.i && \
> sed '/^# *[0-9]/d' $*.i > $*.f) || \
> (rm -f $*.f $*.i $*.c ; exit 1) && \
> rm $*.i
> $(FC) -c $(FFLAGS) $*.f && rm $*.f $*.c
>.F.f:
> ln -s $< $*.c && \
> ($(CPP) -DUD_FORTRAN_SOURCE $(CPPFLAGS) $*.c >$*.i && \
> grep -v '^#' $*.i > $@) || \
> (rm -f $@ $*.i $*.c; exit 1) && \
> rm $*.i $*.c
>.F.i:
> ln -s $< $*.c && \
> $(CPP) -DUD_FORTRAN_SOURCE $(CPPFLAGS) $*.c >$*.i
>
># Generate FORTRAN-callable C code.
>#
>.fc.o:
> $(FORTC) -O $(OS) $< > $*.c \
> || ( rm -f $*.c; exit 1)
> $(CC) -c $(CFLAGS) $(CPPFLAGS) $*.c
>.fc.c:
> $(FORTC) -O $(OS) $< > $@ \
> || (rm -f $*.c; exit 1)
>
># Compile assembler code.
>#
>.S.o:
> $(CC) -c $(CFLAGS) $(CPPFLAGS) $<
>
># Compile C code.
>#
>.c.o:
> $(CC) -c $(CFLAGS) $(CPPFLAGS) $<
>
># Compile lex(1) code. This rule is here to ensure the use of CPPFLAGS.
>#
>.l.o:
> rm -f $*.c
> $(LEX) -t $< > $*.c
> $(CC) -c $(CFLAGS) $(CPPFLAGS) $*.c
> rm $*.c
>
># C preprocess.
># NB:
># 1. Line numbering information is kept.
>#
>.c.i:
> $(CPP) $(CPPFLAGS) $< > $@
>
>.cdl.nc:
> $(NCGEN) -o $*.nc $*.cdl
>
>.sh:
> cp $< $@; chmod +x $@
>
>############################################################################
># Lint:
>############################################################################
>.c.ln:
> $(LINT) -c $(LINTFLAGS) $(CPPFLAGS) $<
>
>
>############################################################################
># Libraries:
>############################################################################
>RANLIB = ranlib
>LIBDIR = $(exec_prefix)/lib
>LIB_A = lib$(LIBRARY).a
>LIBFILE = dummy-libfile # to silence GNU make(1)
>
>library: $(LIB_A)
>
>remote_library: $(REMOTE_LIBRARY)
>
># The following rule is forced because the library can be created by a
># makefile in another directory prior to the execution of the following rule.
>#
>$(LIB_A): $(LIBOBJS) $(LIBOBJS2) FORCE
> $(AR) rcuv $@ $(LIBOBJS)
> case "$(LIBOBJS2)" in \
> '') ;; \
> *) $(AR) rucv $@ $(LIBOBJS2);; \
> esac
> $(RANLIB) $@
>
># The following rule is for those makefiles needing to install object
># modules in a library in another directory. They need only define
># REMOTE_LIBRARY and LIBOBJS. The rule is forced for the same reason as the
># $(LIB_A) rule.
>#
>lib_dummy $(REMOTE_LIBRARY): $(LIBOBJS) FORCE
> $(AR) rcuv $@ $(LIBOBJS)
> $(RANLIB) $@
>
>installed_libfiles: FORCE
> @if [ -n "$(LIBFILES)" ]; then \
> libfiles="$(LIBFILES)"; \
> for libfile in $$libfiles; do \
> $(MAKE) $(MFLAGS) \
> LIBDIR=$(LIBDIR) LIBFILE=$$libfile \
> installed_libfile || exit 1; \
> done; \
> else \
> :; \
> fi
>
>installed_library: FORCE
> @$(MAKE) $(MFLAGS) \
> LIBDIR=$(LIBDIR) LIBFILE=$(LIB_A) \
> installed_libfile
>
># The following target decouples the previous targets from the actual rule;
># thus, eliminating extraneous make(1) messages.
>#
>installed_libfile: $(LIBDIR)/$(LIBFILE)
>
>$(LIBDIR)/dummy.a $(LIBDIR)/$(LIBFILE): $(LIBDIR) $(LIBFILE)
> cp $(LIBFILE) $@
>
>dummy_libdir $(LIBDIR):
> mkdir -p $@
> chmod u+rwx,g+rws,o=rx $@
>
>LIB_SO = lib$(LIBRARY).so.$(MAJOR_NO).$(MINOR_NO)
>LIB_SA = lib$(LIBRARY).sa.$(MAJOR_NO).$(MINOR_NO)
>
>#library: FORCE
># @so_objs=`echo $(LIBOBJS) | sed 's/\.o/.so/g'`; \
># if [ -z "$$so_objs" ]; then \
># :; \
># else \
># $(MAKE) $(MFLAGS) $(LIB_SO) \
># SO_OBJS="$$so_objs"; \
># fi
># @if [ -z "$(SA_OBJS)" ]; then \
># :; \
># else \
># $(MAKE) $(MFLAGS) $(LIB_SA); \
># fi
>
>$(LIB_SO): $(SO_OBJS)
> ld -assert pure-text $(SO_OBJS) -o $@
>$(LIB_SA): $(SA_OBJS) FORCE
> $(AR) rcuv $@ $(SA_OBJS)
>
>.fc.so:
> $(FORTC) -O $(OS) $< > $*.c \
> || (rm -f $*.c; exit 1)
> $(CC) -c -o $$$$.o -pic $(CFLAGS) $(CPPFLAGS) $*.c \
> || (rm -f $$$$.o; exit 1)
> mv $$$$.o $@
>.c.so:
> $(CC) -c -o $$$$.o -pic $(CFLAGS) $(CPPFLAGS) $< \
> || (rm -f $$$$.o; exit 1)
> mv $$$$.o $@
>
>#installed_library: $(LIBDIR)/$(LIB_SO)
># @if [ -z "$(SA_OBJS)" ]; then \
># :; \
># else \
># $(MAKE) $(MFLAGS) $(LIBDIR)/$(LIB_SA); \
># fi
>
>$(LIBDIR)/dummy.so $(LIBDIR)/$(LIB_SO): $(LIBDIR) $(LIB_SO)
> cp $(LIB_SO) $(LIBDIR)/$(LIB_SO)
>$(LIBDIR)/dummy.sa $(LIBDIR)/$(LIB_SA): $(LIBDIR) $(LIB_SA)
> cp $(LIB_SA) $(LIBDIR)/$(LIB_SA)
>
>
>############################################################################
># Programs:
>############################################################################
>BINDIR = $(exec_prefix)/bin
>BINFILE = dummy-binfile
>
>programs: $(PROGRAMS)
>program:
> @if [ -z "$(PROGRAM)" ]; then \
> : true; \
> else \
> $(MAKE) $(MFLAGS) $(PROGRAM); \
> fi
>
>dummy_prog $(PROGRAM): $(OBJS)
> @if [ -r $@.f -o -r $@.F ]; then \
> ld='$(FC) -o $@ $(FFLAGS)'; \
> elif [ -r $@.cc -o -r $@.C ]; then \
> ld='$(CXX) -o $@ $(CXXFLAGS)'; \
> else \
> ld='$(CC) -o $@ $(CFLAGS)'; \
> fi; \
> cmd="$$ld $(LDFLAGS) $(OBJS) $(LIBS)"; \
> echo $$cmd; \
> $$cmd \
> || (rm -f $@; exit 1)
>
>installed_programs: FORCE
> @$(MAKE) $(MFLAGS) installed_binfiles \
> BINDIR=$(BINDIR) BINFILES="$(PROGRAMS)"
>
>installed_binfiles: FORCE
> @if [ -n "$(BINFILES)" ]; then \
> binfiles="$(BINFILES)"; \
> for binfile in $$binfiles; do \
> $(MAKE) $(MFLAGS) \
> BINDIR=$(BINDIR) BINFILE=$$binfile \
> installed_binfile || exit 1; \
> done; \
> else \
> :; \
> fi
>
>installed_program: FORCE
> @$(MAKE) $(MFLAGS) \
> BINDIR=$(BINDIR) BINFILE=$(PROGRAM) \
> installed_binfile
>
># The following target decouples the previous targets from the actual rule;
># thus, eliminating extraneous make(1) messages.
>#
>installed_binfile: $(BINDIR)/$(BINFILE)
>
>$(BINDIR)/dummy $(BINDIR)/$(BINFILE): $(BINDIR) $(BINFILE)
> cp $(BINFILE) $@
>
>dummy_bindir $(BINDIR):
> mkdir -p $@
> chmod u+rwx,g+rws,o=rx $@
>
>$(PROGRAM).pure: $(OBJS)
> purify -best-effort $(PURIFYFLAGS) $(CC) -o $@ \
> $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) $(OBJS) $(LIBS)
>
>pure: purify
>
>purify: $(PROGRAM).pure FORCE
> $(MAKE) $(MFLAGS) PROGRAM=$(PROGRAM).pure test.pure.out
>
>
>############################################################################
># Header files:
>############################################################################
>INCDIR = $(prefix)/include
>HEADER = dummy-header # to silence GNU make(1)
>
>installed_headers: FORCE
> @if [ -n "$(HEADERS)" ]; then \
> headers="$(HEADERS)"; \
> for header in $$headers; do \
> $(MAKE) $(MFLAGS) \
> INCDIR=$(INCDIR) HEADER=$$header \
> installed_header || exit 1; \
> done; \
> else \
> :; \
> fi
>
># The following target decouples the previous targets from the actual rule;
># thus, eliminating extraneous make(1) messages.
>#
>installed_header: $(INCDIR)/$(HEADER)
>
>$(INCDIR)/dummy.h $(INCDIR)/$(HEADER): $(INCDIR) $(HEADER)
> cp $(HEADER) $@
>
>dummy_incdir $(INCDIR):
> mkdir -p $@
> chmod u+rwx,g+rws,o=rx $@
>
>
>############################################################################
># `etc/' files:
>############################################################################
>ETCDIR = $(prefix)/etc
>ETCFILE = dummy-etcfile # to silence GNU make(1)
>
>installed_etcfiles:
> @if [ -n "$(ETCFILES)" ]; then \
> etcfiles="$(ETCFILES)"; \
> for etcfile in $$etcfiles; do \
> $(MAKE) $(MFLAGS) \
> ETCDIR=$(ETCDIR) ETCFILE=$$etcfile \
> installed_etcfile || exit 1; \
> done; \
> else \
> :; \
> fi
>
># The following target decouples the previous targets from the actual rule;
># thus, eliminating extraneous make(1) messages.
>#
>installed_etcfile: $(ETCDIR)/$(ETCFILE)
>
>$(ETCDIR)/dummy $(ETCDIR)/$(ETCFILE): $(ETCDIR) $(ETCFILE)
> cp $(ETCFILE) $@
>
>dummy_etcdir $(ETCDIR):
> mkdir -p $@
> chmod u+rwx,g+rws,o=rx $@
>
>
>############################################################################
># Manual Pages:
>############################################################################
>MANDIR = $(prefix)/man
>MANUAL = dummy-manual # to slience GNU make
>WHATIS = whatis
># The following macro should be empty on systems that don't
># allow users to create their own manual-page indexes.
>MAKEWHATIS_CMD =
>
>installed_manuals: FORCE
> @if [ -n "$(MANUALS)" ]; then \
> manuals="$(MANUALS)"; \
> for manual in $$manuals; do \
> extension=`echo $$manual | sed 's/[^.]*\.//'`; \
> chapter=`echo $$extension | sed 's/\(.\).*/\1/'`; \
> subchapter=`echo $$extension | sed 's/.//'`; \
> mandir=$(MANDIR)/man$$chapter; \
> $(MAKE) $(MFLAGS) \
> MANDIR=$$mandir MANUAL=$$manual \
> installed_manual || exit 1; \
> done; \
> else \
> :; \
> fi
>
># The following target decouples the previous targets from the actual rule;
># thus, eliminating extraneous make(1) messages.
>#
>installed_manual: $(MANDIR)/$(MANUAL)
>
># The first sed(1) editing command in the following replaces the expanded
># RCS keyword `$Date ...' in the `.TH' macro line with something more
># appropriate to a manual page.
>#
># We don't preprocess the manual page with tbl(1) and neqn(1) on OSF1
># IRIX, and HP-UX systems because their man(1) always does that.
>#
># NB: Manual pages like `man3/udunits.3f' cause the subdirectory man3f/
># to be created as a symbolic link to man3/. This accomodates
># operating-systems like SunOS 5.4 which require files like *.3f to be in
># their own man3f/ subdirectory.
>#
>$(MANDIR)/dummy.man $(MANDIR)/$(MANUAL): $(MANDIR) $(MANUAL)
> case `uname -s` in \
> OSF1*|IRIX*|HP-UX) \
> sed \
> -e '/^\.TH/s/$$D\ate: \([0-9]*\)\/\([0-9]*\)\/\([0-9]*\).*\$$/\1-\2-\3/'\
> $(MANUAL) > $@;; \
> *) \
> sed \
> -e '/^\.TH/s/$$D\ate: \([0-9]*\)\/\([0-9]*\)\/\([0-9]*\).*\$$/\1-\2-\3/'\
> $(MANUAL) | $(TBL) | $(NEQN) > $@;; \
> esac
> extension=`echo $(MANUAL) | sed 's/[^.]*\.//'`; \
> subchapter=`echo $$extension | sed 's/.//'`; \
> case "$$subchapter" in \
> '') ;; \
> *) chapter=`echo $$extension | sed 's/\(.\).*/\1/'`; \
> if test -d $(MANDIR)$$subchapter; then \
> : true; \
> else \
> mkdir $(MANDIR)$$subchapter; \
> fi; \
> rm -f $(MANDIR)$$subchapter/$(MANUAL); \
> ln -s ../`basename $(MANDIR)`/$(MANUAL) \
> $(MANDIR)$$subchapter/$(MANUAL); \
> ;; \
> esac
>
>dummy_mandir $(MANDIR):
> mkdir -p $@
> chmod u+rwx,g+rws,o=rx $@
>
>whatis: $(MANDIR)/$(WHATIS)
>$(MANDIR)/$(WHATIS): $(MANDIR)
> $(MAKEWHATIS_CMD)
>
>
>############################################################################
># Documents:
>############################################################################
>DOCDIR = $(prefix)/doc
>DOCUMENT = dummy-document # to silence GNU make(1)
>
>installed_documents: FORCE
> case "$(DOCUMENTS)" in \
> '') : true \
> ;; \
> *) documents="$(DOCUMENTS)"; \
> for document in $$documents; do \
> $(MAKE) $(MFLAGS) \
> DOCUMENT=$$document installed_document || exit 1; \
> done \
> ;; \
> esac
>
># The following target decouples the previous targets from the actual rule;
># thus, eliminating extraneous make(1) messages.
>#
>installed_document: $(DOCDIR)/$(DOCUMENT)
>
>$(DOCDIR)/dummy.doc $(DOCDIR)/$(DOCUMENT): $(DOCDIR) $(DOCUMENT)
> cp $(DOCUMENT) $(DOCDIR)
>
>dummy_docdir $(DOCDIR):
> mkdir -p $@
> chmod u+rwx,g+rws,o=rx $@
>
>
>############################################################################
># TeX-Info Pages:
>############################################################################
>INFODIR = $(prefix)/info
>INFO = dummy-info # to silence GNU make(1)
>
>installed_infos: FORCE
> if [ -z "$(MAKEINFO)" ]; then \
> echo 1>&2 "GNU info-pages won't be installed" \
> "because makeinfo program doesn't exist"; \
> else \
> if [ -n "$(INFOS)" ]; then \
> infos="$(INFOS)"; \
> for info in $$infos; do \
> $(MAKE) $(MFLAGS) \
> INFODIR=$(INFODIR) INFO=$$info \
> installed_info || exit 1; \
> done; \
> else \
> :; \
> fi; \
> fi;
>
># The following target decouples the previous targets from the actual rule;
># thus, eliminating extraneous make(1) messages.
>#
>installed_info: $(INFODIR)/$(INFO)
>
>$(INFODIR)/dummy.info $(INFODIR)/$(INFO): $(INFODIR) $(INFO)
> cp $(INFO) $@
>
>dummy_infodir $(INFODIR):
> mkdir -p $@
> chmod u+rwx,g+rws,o=rx $@
>
># Rules for generating info pages:
>#
>.SUFFIXES: .info .texi .texinfo .txn
>.texi.info:
> @if [ -z "$(MAKEINFO)" ]; then \
> echo 1>&2 "Can't create $@ because no makeinfo(1)"; \
> else \
> $(MAKEINFO) $< --no-split --output=$@; \
> fi
>.texinfo.info:
> @if [ -z "$(MAKEINFO)" ]; then \
> echo 1>&2 "Can't create $@ because no makeinfo(1)"; \
> else \
> $(MAKEINFO) $< --no-split --output=$@; \
> fi
>.txn.info:
> @if [ -z "$(MAKEINFO)" ]; then \
> echo 1>&2 "Can't create $@ because no makeinfo(1)"; \
> else \
> $(MAKEINFO) $< --no-split --output=$@; \
> fi
>
># Ensure that info page depends on canonical TeX-Info macros.
>#
>dummy_info $(INFO): texinfo.tex
>
>
>############################################################################
># Cleanup:
>############################################################################
>clean: default_clean
>distclean: realclean
>realclean: default_realclean
>default_clean: FORCE
> rm -f $(GARBAGE) $(PROGRAM) a.out core *.o *.i *.a *.so.* *.sa.* \
> *.so *.u *.pure *.pure_hardlink *.pure_linkinfo conftest* \
> test.out test.pure.out \
> *.aux *.toc *.dvi \
> config.cache *.Z tags MANIFEST *~
>default_distclean: default_realclean
>default_realclean: FORCE
> rm -f $(GARBAGE) $(PROGRAM) a.out core *.o *.i *.a *.so.* *.sa.* \
> *.so *.u *.pure *.pure_hardlink *.pure_linkinfo conftest* \
> test.out \
> *.aux *.toc *.dvi \
> config.cache *.Z *.log tags TAGS MANIFEST *~ \
> Makefile config.status cc_id
>
>
>############################################################################
># Configuration:
>############################################################################
>
># The following target is touched because config.status won't update it if
># it hasn't changed.
>#
># The following is commented-out because the HPUX make(1) goes into a loop.
>#
>#Makefile: config.status
># ./config.status
># touch $@
>
>config.status: cc_id configure
> ./configure --no-create
>
>cc_id: FORCE
> if test -r $@ && test "`cat $@`" = "$(CC)"; then \
> :; \
> else \
> echo "$(CC)" > $@; \
> fi
>
># The following is commented-out because autoconf is currently only
># available on Zero.
>#
>#configure: configure.in
># autoconf
>
>
>############################################################################
># Dependency maintenance:
>############################################################################
>.PRECIOUS: depend
>#
># Note: The following rule will only work if the C compiler behaves correctly
># when given the `-M' option. AIX's cc(1) and SunOS's acc(1) behave
># incorrectly. --Steve Emmerson 1992-09-24
>#
># Furthermore, we do not attempt to maintain dependencies on installed
># header files (e.g. those in $(INCDIR)) for two reasons: 1) the dependency
# list generated at Unidata mightn't correspond to the situation at a client
># site; and 2) clients using broken compilers (c.f. previous note) can't
># regenerate the dependency list.
>#
># We try to ensure that all C files exist in a distribution that
># includes fortc(1), yacc(1), or lex(1) sources.
>#
>depend: FORCE
># csrcs=`echo $(MANIFEST) | tr ' ' '\012' | egrep -s '\.fc|\.y|\.l'`; \
> if [ "$$csrcs" ]; then \
> echo 1>&2 "Ensuring that all C files exist for target depend"; \
> echo 1>&2 "csrcs = $$csrcs"; \
> $(MAKE) $(MFLAGS) $$csrcs; \
> fi
> -incdir=`echo $(INCDIR) | sed s',/,\\\/,g'`; \
> (case $(OS) in \
> aix*) \
> $(CC) -M -E $(CPPFLAGS) *.c > /dev/null; \
> cat *.u; \
> ;; \
> *) \
> $(CC_MAKEDEPEND) $(CPPFLAGS) *.c *.S 2> /dev/null; \
> ;; \
> esac) | awk '{ \
> if ($$0 ~ /:/) { \
> target = $$1; \
> if (target ~ /:/) { \
> target = substr(target,1,length(target)-1); \
> start = 2; \
> } else { \
> start = 3; \
> } \
> } else { \
> start = 1; \
> } \
> for (i = start; i <= NF; ++i) { \
> if ($$i !~ /^\\/ && \
> $$i !~ /port\// && \
> $$i !~ /^\//) \
> { \
> if ($$i ~ /^\.\//) \
> $$i = substr($$i, 3, 99); \
> print target ": " $$i \
> } \
> } \
> }' >>$@
> sort -u -o $@ $@
> tag='### DO NOT DELETE THIS LINE. make depend DEPENDS ON IT ###'; \
> sed -e "/^$$tag$$/r depend" \
> -e "/^$$tag$$/q" Makefile > Makefile.new
> mv Makefile.new Makefile
>
>
>############################################################################
># Distributions:
>############################################################################
>FTPDIR = /home/ftp/pub/udunits
>FTPBINDIR = /home/ftp/pub/binary/dummy_system
>VERSION = @VERSION@
>TARFLAGS = -chof
>
>zip: FORCE
> version=`cat VERSION | sed 's/\.//g;s/-//g`; \
> $(MAKE) $(MFLAGS) $(PACKAGE)$$version.zip VERSION=$$version
>
>$(PACKAGE)$(VERSION).zip: MANIFEST
> id=$(PACKAGE)$(VERSION) \
> && rm -rf $$id \
> && mkdir $$id \
> && ln -s .. $$id/src \
> && sed "s|^|$$id/src/|" MANIFEST | zip -@ $@ \
> && rm -r $$id
>
>tar.Z: FORCE
> version=`cat VERSION`; \
> $(MAKE) $(MFLAGS) $(PACKAGE)-$$version.tar.Z VERSION=$$version
>
>$(FTPDIR)/$(PACKAGE)-$(VERSION).tar.Z: $(PACKAGE)-$(VERSION).tar.Z
> cp $(PACKAGE)-$(VERSION).tar.Z $@
> chmod u+rw,g+rw,o=r $@
>
>ftp: FORCE
> version=`cat VERSION`; \
> $(MAKE) $(MFLAGS) $(FTPDIR)/$(PACKAGE)-$$version.tar.Z \
> VERSION=$$version; \
> test -r $(FTPDIR)/$(PACKAGE).tar.Z || exit 0; \
> cd $(FTPDIR) || exit 1; \
> rm $(PACKAGE).tar.Z || exit 1; \
> ln -s $(PACKAGE)-$$version.tar.Z $(PACKAGE).tar.Z;
>
>$(PACKAGE)-$(VERSION).tar.Z: MANIFEST
> id=$(PACKAGE)-$(VERSION) \
> && rm -rf $$id \
> && mkdir $$id \
> && ln -s .. $$id/src \
> && tar $(TARFLAGS) - `sed "s|^|$$id/src/|" MANIFEST` | compress > $@ \
> && rm -r $$id
>
>binftp: FORCE
> version=`cat VERSION`; \
> $(MAKE) $(MFLAGS) $(FTPBINDIR)/$(PACKAGE)-$$version.tar.Z \
> VERSION=$$version
>ftpbin: binftp
>
>$(FTPBINDIR)/$(PACKAGE)-$(VERSION).tar.Z: FORCE
> id=$(PACKAGE)-$(VERSION) \
> && rm -f $$id \
> && ln -s $(prefix) $$id \
> && tar $(TARFLAGS) - README $$id/bin $$id/doc $$id/etc $$id/include \
> $$id/lib $$id/man | compress > $@ \
> && rm $$id
> chmod u+rw,g+rw,o=r $@
> test -r $(FTPBINDIR)/$(PACKAGE).tar.Z || exit 0; \
> cd $(FTPBINDIR) || exit 1; \
> rm $(PACKAGE).tar.Z || exit 1; \
> ln -s $(PACKAGE)-$(VERSION).tar.Z $(PACKAGE).tar.Z;
>
>MANIFEST: FORCE
> @echo 1>&2 Creating MANIFEST
> @$(MAKE) -s $(MFLAGS) MANIFEST.echo > $@
>
>MANIFEST.echo: FORCE
> @echo $(MANIFEST) | tr ' ' '\012'
> @if [ -n "$(SUBDIRS)" ]; then \
> subdirs="$(SUBDIRS)"; \
> for subdir in $$subdirs; do \
> (cd $$subdir && \
> echo 1>&2 Creating $@ in `pwd` && \
> $(MAKE) $(MFLAGS) MANIFEST.echo | \
> sed "s|^|$$subdir/|") || exit 1; \
> done; \
> else \
> :; \
> fi
>
>ensure_manifest: FORCE
> @$(MAKE) $(MFLAGS) \
> `echo $(MANIFEST) | sed 's/MANIFEST//'`
> @if [ -n "$(SUBDIRS)" ]; then \
> subdirs="$(SUBDIRS)"; \
> for subdir in $$subdirs; do \
> (cd $$subdir && \
> echo 1>&2 Creating $@ in `pwd` && \
> $(MAKE) $(MFLAGS) ensure_manifest ) || \
> exit 1; \
> done; \
> else \
> :; \
> fi
>
>
>############################################################################
># Miscellaneous:
>############################################################################
>
># The following dummy target is useful as a dependency to ensure that a
># rule is always executed.
>#
>FORCE:
>
>### Everything after the following line might be overwritten ###
>### DO NOT DELETE THIS LINE. make depend DEPENDS ON IT ###
>
>--Boundary_(ID_ACfmMdgRAWMlX/rhrZJfEg)
>Content-type: text/plain; charset=us-ascii; name=CUSTOMIZE
>Content-transfer-encoding: 7BIT
>Content-disposition: attachment; filename=CUSTOMIZE
>
># This file is for customizing the configuation process performed by
># `./configure'. This file consists of sh(1) variable-definition lines.
># The value given to those variable by this file will override their default
># values.
>#
># You can also customize the configuration process via the environment
># variables seen by ./configure. For example:
>#
># In csh(1):
># % setenv CC acc
># & setenv CFLAGS -g
# % ./configure
>#
># In sh(1):
># $ CC=acc CFLAGS=-g ./configure
>#
># Variables in this file override the environmental ones.
>#
>#############################################################################
>#
># Type of C compiler (default is `cc'):
>CC='gcc'
>#
># C compiler flags (default is `-O'):
># CFLAGS=-g
>#
># C preprocessor flags (default is `-DNDEBUG'):
># CPPFLAGS=-DDEBUG
>#
># Installation prefix (default is `../..'):
>prefix=/usr/local/unidata
>#
># Ancillary libraries. SunOS 4 user's might need something like the
># following in order to resolve strerror() in the perl/ subdirectory.
># LIBS='-L/usr/lang/SC3.0.1/lib -lansi'
>
>--Boundary_(ID_ACfmMdgRAWMlX/rhrZJfEg)
>Content-type: text/plain; charset=us-ascii; name=log
>Content-transfer-encoding: quoted-printable
>Content-disposition: attachment; filename=log
>
>creating cache ./config.cache
>checking type of operating system... linux
>checking for manual-page index command...=20
>checking for C compiler... gcc
>checking for dependency generation mechanism... gcc -M
>checking how to run the C preprocessor... gcc -E
>checking the C preprocessor... works
>checking for C const... yes
>checking for C volatile... yes
>checking for C signed... yes
>checking for C function prototypes... yes
>checking for standard C variadic functions... yes
>checking for standard C string generation... yes
>checking for standard C token pasting... yes
>checking C void pointer... yes
>checking for ar... ar
>checking for tar flags... -chof
>checking for ranlib... ranlib
>checking binary distribution directory... /home/ftp/pub/binary/dummy_syst=
>em
>checking the installation prefix... /usr/local/unidata
>checking the installation exec-prefix... /usr/local/unidata
>checking for neqn... neqn
>checking for tbl... tbl
>checking for ar... (cached) ar
>checking for C math library...=20
>checking for (void)sin(0.0) in default library(s)... no
>checking for (void)sin(0.0) in -lm... yes
>checking style for cfortran.h... Standard
>checking for stddef.h... yes
>checking C header file <stddef.h> for typedef size_t... declared
>checking for stddef.h... (cached) yes
>checking C header file <stddef.h> for typedef ptrdiff_t... declared
>checking for float.h... yes
>checking for stdlib.h... yes
>checking C header file <stdlib.h> for typedef size_t... declared
>checking for atexit... yes
>checking for stdlib.h... (cached) yes
>checking C header file <stdlib.h> for function atexit()... declared
>checking for getenv... yes
>checking for stdlib.h... (cached) yes
>checking C header file <stdlib.h> for function getenv()... declared
>checking for string.h... yes
>checking C header file <string.h> for typedef size_t... declared
>checking for strerror... yes
>checking for string.h... (cached) yes
>checking C header file <string.h> for function strerror()... declared
>checking for string.h... (cached) yes
>checking C header file <string.h> for function strchr()... declared
>checking for string.h... (cached) yes
>checking C header file <string.h> for function strcpy()... undeclared
>checking for string.h... (cached) yes
>checking C header file <string.h> for function strrchr()... undeclared
>checking for string.h... (cached) yes
>checking C header file <string.h> for function strncpy()... declared
>checking for string.h... (cached) yes
>checking C header file <string.h> for function strtok()... declared
>checking for strstr... yes
>checking for string.h... (cached) yes
>checking C header file <string.h> for function strstr()... undeclared
>checking for memmove... yes
>checking for string.h... (cached) yes
>checking C header file <string.h> for function memmove()... declared
>checking for time.h... yes
>checking C header file <time.h> for typedef time_t... declared
>checking for time.h... (cached) yes
>checking C header file <time.h> for typedef size_t... declared
>checking for difftime... yes
>checking for time.h... (cached) yes
>checking C header file <time.h> for function difftime()... declared
>checking for strftime... yes
>checking for time.h... (cached) yes
>checking C header file <time.h> for function strftime()... declared
>checking for search.h... yes
>checking C header file <search.h> for typedef ENTRY... declared
>checking for search.h... (cached) yes
>checking C header file <search.h> for typedef ACTION... declared
>checking for search.h... (cached) yes
>checking C header file <search.h> for typedef VISIT... declared
>checking for tsearch... yes
>checking for search.h... (cached) yes
>checking C header file <search.h> for function tsearch()... declared
>checking for tfind... yes
>checking for search.h... (cached) yes
>checking C header file <search.h> for function tfind()... declared
>checking for tdelete... yes
>checking for search.h... (cached) yes
>checking C header file <search.h> for function tdelete()... declared
>checking for twalk... yes
>checking for search.h... (cached) yes
>checking C header file <search.h> for function twalk()... declared
>checking for perl... perl
>checking for type of perl executable to create... dynamic
>checking for position-independent compilation flags... ''
>updating cache ./config.cache
>creating ./config.status
>creating Makefile
>creating lib/Makefile
>creating udunits/Makefile
>creating perl/Makefile.PL
>creating port/master.mk
>creating port/Makefile
>creating port/misc/Makefile
>creating port/cfortran/Makefile
>creating port/misc/udposix.h
>creating port/misc/stdarg.h
>creating port/misc/stddef.h
>creating port/misc/stdlib.h
>creating port/misc/string.h
>creating port/misc/time.h
>creating port/misc/limits.h
>creating port/misc/search.h
>expanding `include's in file `Makefile'
>expanding `include's in file `lib/Makefile'
>expanding `include's in file `udunits/Makefile'
>expanding `include's in file `perl/Makefile.PL'
>expanding `include's in file `port/master.mk'
>expanding `include's in file `port/Makefile'
>expanding `include's in file `port/misc/Makefile'
>expanding `include's in file `port/cfortran/Makefile'
>
>making `all' in directory /home/vonw/tmp/udunits-1.11.7/src/port
>
>make[1]: Entering directory `/home/vonw/tmp/udunits-1.11.7/src/port'
>
>making `all' in directory /home/vonw/tmp/udunits-1.11.7/src/port/misc
>
>make[2]: Entering directory `/home/vonw/tmp/udunits-1.11.7/src/port/misc'
>gcc -c -O -I. -D_REENTRANT uddummy.c
>ar rcuv libudport.a uddummy.o=20
>a - uddummy.o
>case "" in \
>'') ;; \
>*) ar rucv libudport.a ;; \
>esac
>ranlib libudport.a
>make[2]: Leaving directory `/home/vonw/tmp/udunits-1.11.7/src/port/misc'
>
>returning to directory /home/vonw/tmp/udunits-1.11.7/src/port
>
>
>making `all' in directory /home/vonw/tmp/udunits-1.11.7/src/port/cfortran
>
>make[2]: Entering directory `/home/vonw/tmp/udunits-1.11.7/src/port/cfort=
>ran'
>make[2]: Nothing to be done for `all'.
>make[2]: Leaving directory `/home/vonw/tmp/udunits-1.11.7/src/port/cfortr=
>an'
>
>returning to directory /home/vonw/tmp/udunits-1.11.7/src/port
>
>make[1]: Leaving directory `/home/vonw/tmp/udunits-1.11.7/src/port'
>
>returning to directory /home/vonw/tmp/udunits-1.11.7/src
>
>
>making `all' in directory /home/vonw/tmp/udunits-1.11.7/src/lib
>
>make[1]: Entering directory `/home/vonw/tmp/udunits-1.11.7/src/lib'
>ln -s ../port/misc/udalloc.c .
>ln -s ../port/misc/udalloc.h .
>gcc -c -O -I../port/misc -I../port/cfortran -DUT_DEFAULT_PATH=3D'"/usr/lo=
>cal/unidata/etc/udunits.dat"' utlib.c
>In file included from utlib.c:29:
>=2E./port/cfortran/cfortran.h:132:3: #error "cfortran.h: Can't find your=
> environment among: - MIPS cc and f77 2.0. (e.g. Silicon Graphics, DEC=
>stations, ...) - IBM AIX XL C and FORTRAN Compiler/6000 Version 0=
>1.01.0000.0000 - VAX VMS CC 3.1 and FORTRAN 5.4. =
> - Alpha VMS DEC C 1.3 and DEC FORTRAN 6.0. =
> - Alpha OSF DEC C and DEC Fortran for OSF/1 AXP Ve=
>rsion 1.2 - Apollo DomainOS 10.2 (sys5.3) with f77 10.7 and =
>cc 6.7. - CRAY =
> - NEC SX-4 SUPER-UX =
> - CONVEX =
> - Sun =
> - PowerStation Fortran with Visual C++ =
> - HP9000s300/s700/s800 Latest test with: HP-UX A.0=
>8.07 A 9000/730 - LynxOS: cc or gcc with f2c. =
> - VAXUltrix: vcc,cc or gcc with f2c. gcc or cc wit=
>h f77. - f77 with vcc works; but missing link =
>magic for f77 I/O. - NO fort. None of gcc, cc or vcc gener=
>ate required names. - f2c : Use #define f2cFortran, or cc -Df2cF=
>ortran - NAG f90: Use #define NAGf90Fortran, or cc -DNAGf=
>90Fortran - Absoft UNIX F77: Use #define AbsoftUNIXFortran o=
>r cc -DAbsoftUNIXFortran - Absoft Pro Fortran: Use #define AbsoftProF=
>ortran - Portland Group Fortran: Use #define pgiFortran"
>make[1]: *** [utlib.o] Error 1
>make[1]: Leaving directory `/home/vonw/tmp/udunits-1.11.7/src/lib'
>make: *** [lib/all] Error 1
>
>--Boundary_(ID_ACfmMdgRAWMlX/rhrZJfEg)
>Content-type: text/x-log; charset=us-ascii; name=config.log
>Content-transfer-encoding: 7BIT
>Content-disposition: attachment; filename=config.log
>
>This file contains any messages produced by compilers while
>running configure, to aid debugging if configure makes a mistake.
>
>configure:1105: gcc -E conftest.c >/dev/null 2>conftest.out
>configure:1146: gcc -E conftest.c >/dev/null 2>conftest.out
>configure:1175: gcc -c conftest.c 1>&5
>configure:1203: gcc -c conftest.c 1>&5
>configure:1231: gcc -c conftest.c 1>&5
>configure:1259: gcc -c conftest.c 1>&5
>configure:1303: gcc -c conftest.c 1>&5
>configure:1455: gcc -c conftest.c 1>&5
>configure:1483: gcc -c conftest.c 1>&5
>configure:1512: gcc -c conftest.c 1>&5
>configure:2018: gcc -o conftest -O conftest.c 1>&5
>/tmp/cc8khPif.o: In function `t':
>/tmp/cc8khPif.o(.text+0x1b): undefined reference to `sin'
>collect2: ld returned 1 exit status
>configure:2063: gcc -o conftest -O conftest.c -lm 1>&5
>configure:2288: gcc -E conftest.c >/dev/null 2>conftest.out
>configure:2430: gcc -E conftest.c >/dev/null 2>conftest.out
>configure:2455: gcc -E conftest.c >/dev/null 2>conftest.out
>configure:2449:76: DBL_DIG is defined: No such file or directory
>configure:2603: gcc -E conftest.c >/dev/null 2>conftest.out
>configure:2687: gcc -o conftest -O conftest.c 1>&5
>configure:2743: gcc -c -O conftest.c 1>&5
>configure:2735: conflicting types for `atexit'
>/usr/include/stdlib.h:596: previous declaration of `atexit'
>configure:2800: gcc -o conftest -O conftest.c 1>&5
>configure:2856: gcc -c -O conftest.c 1>&5
>configure:2848: conflicting types for `getenv'
>/usr/include/stdlib.h:624: previous declaration of `getenv'
>configure:2975: gcc -E conftest.c >/dev/null 2>conftest.out
>configure:3059: gcc -o conftest -O conftest.c 1>&5
>configure:3115: gcc -c -O conftest.c 1>&5
>configure:3107: conflicting types for `strerror'
>/usr/include/string.h:243: previous declaration of `strerror'
>configure:3180: gcc -c -O conftest.c 1>&5
>configure:3172:59: macro "strchr" requires 2 arguments, but only 1 given
>configure:3172: warning: built-in function `strchr' declared as non-function
>configure:3245: gcc -c -O conftest.c 1>&5
>configure:3310: gcc -c -O conftest.c 1>&5
configure:3375: gcc -c -O conftest.c 1>&5
>configure:3367:60: macro "strncpy" requires 3 arguments, but only 1 given
>configure:3367: warning: built-in function `strncpy' declared as non-function
>configure:3440: gcc -c -O conftest.c 1>&5
>configure:3432: conflicting types for `strtok'
>/usr/include/string.h:192: previous declaration of `strtok'
>configure:3497: gcc -o conftest -O conftest.c 1>&5
>configure:3480: warning: conflicting types for built-in function `strstr'
>configure:3553: gcc -c -O conftest.c 1>&5
>configure:3610: gcc -o conftest -O conftest.c 1>&5
>configure:3666: gcc -c -O conftest.c 1>&5
>configure:3658: conflicting types for `memmove'
>/usr/include/string.h:43: previous declaration of `memmove'
>configure:3776: gcc -E conftest.c >/dev/null 2>conftest.out
>configure:3926: gcc -o conftest -O conftest.c 1>&5
>configure:3982: gcc -c -O conftest.c 1>&5
>configure:3974: conflicting types for `difftime'
>/usr/include/time.h:186: previous declaration of `difftime'
>configure:4039: gcc -o conftest -O conftest.c 1>&5
>configure:4095: gcc -c -O conftest.c 1>&5
>configure:4087: conflicting types for `strftime'
>/usr/include/time.h:197: previous declaration of `strftime'
>configure:4296: gcc -E conftest.c >/dev/null 2>conftest.out
>configure:4512: gcc -o conftest -O conftest.c 1>&5
>configure:4568: gcc -c -O conftest.c 1>&5
>configure:4560: conflicting types for `tsearch'
>/usr/include/search.h:131: previous declaration of `tsearch'
>configure:4625: gcc -o conftest -O conftest.c 1>&5
>configure:4681: gcc -c -O conftest.c 1>&5
>configure:4673: conflicting types for `tfind'
>/usr/include/search.h:136: previous declaration of `tfind'
>configure:4738: gcc -o conftest -O conftest.c 1>&5
>configure:4794: gcc -c -O conftest.c 1>&5
>configure:4786: conflicting types for `tdelete'
>/usr/include/search.h:141: previous declaration of `tdelete'
>configure:4851: gcc -o conftest -O conftest.c 1>&5
>configure:4907: gcc -c -O conftest.c 1>&5
>configure:4899: conflicting types for `twalk'
>/usr/include/search.h:151: previous declaration of `twalk'
>
>--Boundary_(ID_ACfmMdgRAWMlX/rhrZJfEg)
>Content-type: application/x-shellscript; name=configure
>Content-transfer-encoding: 7bit
>Content-disposition: attachment; filename=configure
>
>#! /bin/sh
>
># Guess values for system-dependent variables and create Makefiles.
># Generated automatically using autoconf version 2.9
># Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
>#
># This configure script is free software; the Free Software Foundation
># gives unlimited permission to copy, distribute and modify it.
>
># Defaults:
>ac_help=
>ac_default_prefix=/usr/local
># Any additions from configure.in:
>
># Initialize some variables set by options.
># The variables have the same names as the options, with
># dashes changed to underlines.
>build=NONE
>cache_file=./config.cache
>exec_prefix=NONE
>host=NONE
>no_create=
>nonopt=NONE
>no_recursion=
>prefix=NONE
>program_prefix=NONE
>program_suffix=NONE
>program_transform_name=s,x,x,
>silent=
>site=
>srcdir=
>target=NONE
>verbose=
>x_includes=NONE
>x_libraries=NONE
>bindir='${exec_prefix}/bin'
>sbindir='${exec_prefix}/sbin'
>libexecdir='${exec_prefix}/libexec'
>datadir='${prefix}/share'
>sysconfdir='${prefix}/etc'
>sharedstatedir='${prefix}/com'
>localstatedir='${prefix}/var'
>libdir='${exec_prefix}/lib'
>includedir='${prefix}/include'
>oldincludedir='/usr/include'
>infodir='${prefix}/info'
>mandir='${prefix}/man'
>
># Initialize some other variables.
>subdirs=
>MFLAGS= MAKEFLAGS=
>
>ac_prev=
>for ac_option
>do
>
> # If the previous option needs an argument, assign it.
> if test -n "$ac_prev"; then
> eval "$ac_prev=\$ac_option"
> ac_prev=
> continue
> fi
>
> case "$ac_option" in
> -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
> *) ac_optarg= ;;
> esac
>
> # Accept the important Cygnus configure options, so we can diagnose typos.
>
> case "$ac_option" in
>
> -bindir | --bindir | --bindi | --bind | --bin | --bi)
> ac_prev=bindir ;;
> -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
> bindir="$ac_optarg" ;;
>
> -build | --build | --buil | --bui | --bu)
> ac_prev=build ;;
> -build=* | --build=* | --buil=* | --bui=* | --bu=*)
> build="$ac_optarg" ;;
>
> -cache-file | --cache-file | --cache-fil | --cache-fi \
> | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
> ac_prev=cache_file ;;
> -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
> | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*
> )
> cache_file="$ac_optarg" ;;
>
> -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
> ac_prev=datadir ;;
> -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
> | --da=*)
> datadir="$ac_optarg" ;;
>
> -disable-* | --disable-*)
> ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
> # Reject names that are not valid shell variable names.
> if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
> { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit
> 1; }
> fi
> ac_feature=`echo $ac_feature| sed 's/-/_/g'`
> eval "enable_${ac_feature}=no" ;;
>
> -enable-* | --enable-*)
> ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
> # Reject names that are not valid shell variable names.
> if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
> { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit
> 1; }
> fi
> ac_feature=`echo $ac_feature| sed 's/-/_/g'`
> case "$ac_option" in
> *=*) ;;
> *) ac_optarg=yes ;;
> esac
> eval "enable_${ac_feature}='$ac_optarg'" ;;
>
> -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
> | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
> | --exec | --exe | --ex)
> ac_prev=exec_prefix ;;
> -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
> | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
> | --exec=* | --exe=* | --ex=*)
> exec_prefix="$ac_optarg" ;;
>
> -gas | --gas | --ga | --g)
> # Obsolete; use --with-gas.
> with_gas=yes ;;
>
> -help | --help | --hel | --he)
> # Omit some internal or obsolete options to make the list less imposing.
> # This message is too long to be a string in the A/UX 3.1 sh.
> cat << EOF
>Usage: configure [options] [host]
>Options: [defaults in brackets after descriptions]
>Configuration:
> --cache-file=FILE cache test results in FILE
> --help print this message
> --no-create do not create output files
> --quiet, --silent do not print \`checking...' messages
> --version print the version of autoconf that created configure
>Directory and file names:
> --prefix=PREFIX install architecture-independent files in PREFIX
> [$ac_default_prefix]
> --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
> [same as prefix]
> --bindir=DIR user executables in DIR [EPREFIX/bin]
> --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
> --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
> --datadir=DIR read-only architecture-independent data in DIR
> [PREFIX/share]
> --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
> --sharedstatedir=DIR modifiable architecture-independent data in DIR
> [PREFIX/com]
> --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
> --libdir=DIR object code libraries in DIR [EPREFIX/lib]
> --includedir=DIR C header files in DIR [PREFIX/include]
> --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
> --infodir=DIR info documentation in DIR [PREFIX/info]
> --mandir=DIR man documentation in DIR [PREFIX/man]
> --srcdir=DIR find the sources in DIR [configure dir or ..]
> --program-prefix=PREFIX prepend PREFIX to installed program names
> --program-suffix=SUFFIX append SUFFIX to installed program names
> --program-transform-name=PROGRAM
> run sed PROGRAM on installed program names
>EOF
> cat << EOF
Host type:
> --build=BUILD configure for building on BUILD [BUILD=HOST]
> --host=HOST configure for HOST [guessed]
> --target=TARGET configure for TARGET [TARGET=HOST]
>Features and packages:
> --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
> --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
> --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
> --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
> --x-includes=DIR X include files are in DIR
> --x-libraries=DIR X library files are in DIR
>EOF
> if test -n "$ac_help"; then
> echo "--enable and --with options recognized:$ac_help"
> fi
> exit 0 ;;
>
> -host | --host | --hos | --ho)
> ac_prev=host ;;
> -host=* | --host=* | --hos=* | --ho=*)
> host="$ac_optarg" ;;
>
> -includedir | --includedir | --includedi | --included | --include \
> | --includ | --inclu | --incl | --inc)
> ac_prev=includedir ;;
> -includedir=* | --includedir=* | --includedi=* | --included=* | --include=*
> \
> | --includ=* | --inclu=* | --incl=* | --inc=*)
> includedir="$ac_optarg" ;;
>
> -infodir | --infodir | --infodi | --infod | --info | --inf)
> ac_prev=infodir ;;
> -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
> infodir="$ac_optarg" ;;
>
> -libdir | --libdir | --libdi | --libd)
> ac_prev=libdir ;;
> -libdir=* | --libdir=* | --libdi=* | --libd=*)
> libdir="$ac_optarg" ;;
>
> -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
> | --libexe | --libex | --libe)
> ac_prev=libexecdir ;;
> -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=*
> \
> | --libexe=* | --libex=* | --libe=*)
> libexecdir="$ac_optarg" ;;
>
> -localstatedir | --localstatedir | --localstatedi | --localstated \
> | --localstate | --localstat | --localsta | --localst \
> | --locals | --local | --loca | --loc | --lo)
> ac_prev=localstatedir ;;
> -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
> | --localstate=* | --localstat=* | --localsta=* | --localst=* \
> | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
> localstatedir="$ac_optarg" ;;
>
> -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
> ac_prev=mandir ;;
> -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
> mandir="$ac_optarg" ;;
>
> -nfp | --nfp | --nf)
> # Obsolete; use --without-fp.
> with_fp=no ;;
>
> -no-create | --no-create | --no-creat | --no-crea | --no-cre \
> | --no-cr | --no-c)
> no_create=yes ;;
>
> -no-recursion | --no-recursion | --no-recursio | --no-recursi \
> | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
> no_recursion=yes ;;
>
> -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
> | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
> | --oldin | --oldi | --old | --ol | --o)
> ac_prev=oldincludedir ;;
> -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
> | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
> | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
> oldincludedir="$ac_optarg" ;;
>
> -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
> ac_prev=prefix ;;
> -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
> prefix="$ac_optarg" ;;
>
> -program-prefix | --program-prefix | --program-prefi | --program-pref \
> | --program-pre | --program-pr | --program-p)
> ac_prev=program_prefix ;;
> -program-prefix=* | --program-prefix=* | --program-prefi=* \
> | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
> program_prefix="$ac_optarg" ;;
>
> -program-suffix | --program-suffix | --program-suffi | --program-suff \
> | --program-suf | --program-su | --program-s)
> ac_prev=program_suffix ;;
> -program-suffix=* | --program-suffix=* | --program-suffi=* \
> | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
> program_suffix="$ac_optarg" ;;
>
> -program-transform-name | --program-transform-name \
> | --program-transform-nam | --program-transform-na \
> | --program-transform-n | --program-transform- \
> | --program-transform | --program-transfor \
> | --program-transfo | --program-transf \
> | --program-trans | --program-tran \
> | --progr-tra | --program-tr | --program-t)
> ac_prev=program_transform_name ;;
> -program-transform-name=* | --program-transform-name=* \
> | --program-transform-nam=* | --program-transform-na=* \
> | --program-transform-n=* | --program-transform-=* \
> | --program-transform=* | --program-transfor=* \
> | --program-transfo=* | --program-transf=* \
> | --program-trans=* | --program-tran=* \
> | --progr-tra=* | --program-tr=* | --program-t=*)
> program_transform_name="$ac_optarg" ;;
>
> -q | -quiet | --quiet | --quie | --qui | --qu | --q \
> | -silent | --silent | --silen | --sile | --sil)
> silent=yes ;;
>
> -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
> ac_prev=sbindir ;;
> -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
> | --sbi=* | --sb=*)
> sbindir="$ac_optarg" ;;
>
> -sharedstatedir | --sharedstatedir | --sharedstatedi \
> | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
> | --sharedst | --shareds | --shared | --share | --shar \
> | --sha | --sh)
> ac_prev=sharedstatedir ;;
> -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
> | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
> | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
> | --sha=* | --sh=*)
> sharedstatedir="$ac_optarg" ;;
>
> -site | --site | --sit)
> ac_prev=site ;;
> -site=* | --site=* | --sit=*)
> site="$ac_optarg" ;;
>
> -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
> ac_prev=srcdir ;;
> -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
> srcdir="$ac_optarg" ;;
>
> -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
> | --syscon | --sysco | --sysc | --sys | --sy)
> ac_prev=sysconfdir ;;
> -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=*
> \
> | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
> sysconfdir="$ac_optarg" ;;
>
> -target | --target | --targe | --targ | --tar | --ta | --t)
> ac_prev=target ;;
> -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
> target="$ac_optarg" ;;
>
> -v | -verbose | --verbose | --verbos | --verbo | --verb)
> verbose=yes ;;
>
> -version | --version | --versio | --versi | --vers)
> echo "configure generated by autoconf version 2.9"
> exit 0 ;;
>
> -with-* | --with-*)
> ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
> # Reject names that are not valid shell variable names.
> if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
> { echo "configure: error: $ac_package: invalid package name" 1>&2; exit
> 1; }
> fi
> ac_package=`echo $ac_package| sed 's/-/_/g'`
> case "$ac_option" in
> *=*) ;;
> *) ac_optarg=yes ;;
> esac
> eval "with_${ac_package}='$ac_optarg'" ;;
>
> -without-* | --without-*)
> ac_package=`echo $ac_option|sed -e 's/-*without-//'`
> # Reject names that are not valid shell variable names.
> if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
> { echo "configure: error: $ac_package: invalid package name" 1>&2; exit
> 1; }
> fi
> ac_package=`echo $ac_package| sed 's/-/_/g'`
> eval "with_${ac_package}=no" ;;
>
> --x)
> # Obsolete; use --with-x.
> with_x=yes ;;
>
> -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
> | --x-incl | --x-inc | --x-in | --x-i)
> ac_prev=x_includes ;;
> -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=*
> \
> | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
> x_includes="$ac_optarg" ;;
>
> -x-libraries | --x-libraries | --x-librarie | --x-librari \
> | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
> ac_prev=x_libraries ;;
> -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
> | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
> x_libraries="$ac_optarg" ;;
>
> -*) { echo "configure: error: $ac_option: invalid option; use --help to show
> usage" 1>&2; exit 1; }
> ;;
>
> *)
> if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
> echo "configure: warning: $ac_option: invalid host type" 1>&2
> fi
> if test "x$nonopt" != xNONE; then
> { echo "configure: error: can only configure for one host and one target
> at a time" 1>&2; exit 1; }
> fi
> nonopt="$ac_option"
> ;;
>
> esac
>done
>
>if test -n "$ac_prev"; then
> { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/
> g'`" 1>&2; exit 1; }
>fi
>
>trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1
> 2 15
>
># File descriptor usage:
># 0 standard input
># 1 file creation
># 2 errors and warnings
># 3 some systems may open it to /dev/tty
># 4 used on the Kubota Titan
># 6 checking for... messages and results
># 5 compiler messages saved in config.log
>if test "$silent" = yes; then
> exec 6>/dev/null
>else
> exec 6>&1
>fi
>exec 5>./config.log
>
>echo "\
>This file contains any messages produced by compilers while
>running configure, to aid debugging if configure makes a mistake.
>" 1>&5
>
># Strip out --no-create and --no-recursion so they do not pile up.
># Also quote any args containing shell metacharacters.
>ac_configure_args=
>for ac_arg
>do
> case "$ac_arg" in
> -no-create | --no-create | --no-creat | --no-crea | --no-cre \
> | --no-cr | --no-c) ;;
> -no-recursion | --no-recursion | --no-recursio | --no-recursi \
> | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
> *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
> ac_configure_args="$ac_configure_args '$ac_arg'" ;;
> *) ac_configure_args="$ac_configure_args $ac_arg" ;;
> esac
>done
>
># NLS nuisances.
># Only set LANG and LC_ALL to C if already set.
># These must not be set unconditionally because not all systems understand
># e.g. LANG=C (notably SCO).
>if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
>if test "${LANG+set}" = set; then LANG=C; export LANG; fi
>
># confdefs.h avoids OS command line length limits that DEFS can exceed.
>rm -rf conftest* confdefs.h
># AIX cpp loses on an empty file, so make sure it contains at least a newline.
>echo > confdefs.h
>
># A filename unique to this package, relative to the directory that
># configure is in, which we can look for to find out if srcdir is correct.
>ac_unique_file=udunits
>
># Find the source files, if location was not specified.
>if test -z "$srcdir"; then
> ac_srcdir_defaulted=yes
> # Try the directory containing this script, then its parent.
> ac_prog=$0
> ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
> test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
> srcdir=$ac_confdir
> if test ! -r $srcdir/$ac_unique_file; then
> srcdir=..
> fi
>else
> ac_srcdir_defaulted=no
>fi
>if test ! -r $srcdir/$ac_unique_file; then
> if test "$ac_srcdir_defaulted" = yes; then
> { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2;
> exit 1; }
> else
> { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
> fi
>fi
>srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
>
># Prefer explicitly selected file to automatically selected ones.
>if test -z "$CONFIG_SITE"; then
> if test "x$prefix" != xNONE; then
> CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
> else
> CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/c
> onfig.site"
> fi
>fi
>for ac_site_file in $CONFIG_SITE; do
> if test -r "$ac_site_file"; then
> echo "loading site script $ac_site_file"
> . "$ac_site_file"
> fi
>done
>
>if test -r "$cache_file"; then
> echo "loading cache $cache_file"
> . $cache_file
>else
> echo "creating cache $cache_file"
> > $cache_file
>fi
>
>ac_ext=c
># CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
>ac_cpp='$CPP $CPPFLAGS'
>ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
>ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIB
> S 1>&5'
>
>if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
> # Stardent Vistra SVR4 grep lacks -e, says address@hidden.
> if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
> ac_n= ac_c='
>' ac_t=' '
> else
> ac_n=-n ac_c= ac_t=
> fi
>else
> ac_n= ac_c='\c' ac_t=
>fi
>
>
> if test -r CUSTOMIZE; then
> . ./CUSTOMIZE
> fi
>
> echo $ac_n "checking type of operating system""... $ac_c" 1>&6
> if test -z "$OPSYS"; then
> OPSYS=`uname -s | tr '[A-Z]' '[a-z]' | sed 's;/;;g'`
> if test -z "$OPSYS"; then
> echo "OPSYS:operating system:sunos5" >> confdefs.missing
> fi
> fi
> case $OPSYS in
> aix)
> OS_NAME=`uname -s`
> OS_MAJOR=`uname -v | sed 's/[^0-9]*\([0-9]*\)\..*/\1/'`
> ;;
> hp-ux)
> OPSYS=hpux`uname -r | sed 's/[A-Z.0]*\([0-9]*\).*/\1/'`
> OS_NAME=HPUX
> OS_MAJOR=`uname -r | sed 's/[A-Z.0]*\([0-9]*\).*/\1/'`
> ;;
> irix)
> OPSYS=${OPSYS}`uname -r | sed 's/\..*//'`
> OS_NAME=IRIX
> OS_MAJOR=`uname -r | sed 's/\..*//'`
> ;;
> osf*)
> OS_NAME=OSF1
> OS_MAJOR=`uname -r | sed 's/[^0-9]*\([0-9]*\)\..*/\1/'`
> ;;
> sn*)
> OPSYS=unicos
> OS_NAME=UNICOS
> OS_MAJOR=`uname -r | sed 's/[^0-9]*\([0-9]*\)\..*/\1/'`
> ;;
> sunos)
> OS_NAME=SunOS
> OS_MAJOR=`uname -r | sed 's/\..*//'`
> OPSYS=$OPSYS$OS_MAJOR
> ;;
> ultrix)
> OS_NAME=ULTRIX
> OS_MAJOR=`uname -r | sed 's/\..*//'`
> ;;
> *)
> # On at least one UNICOS system, 'uname -s' returned the
> # hostname (sigh).
> if uname -a | grep CRAY >/dev/null; then
> OPSYS=unicos
> OS_NAME=UNICOS
> else
> OS_NAME=`uname -s | sed 's/[^A-Za-z0-9_]//g'`
> fi
> OS_MAJOR=`uname -r | sed 's/[^0-9]*\([0-9]*\)\..*/\1/'`
> ;;
> esac
>
> # Adjust OPSYS for CRAY MPP environment.
> #
> case "$OPSYS" in
> unicos)
>
> case "$CC$TARGET$CFLAGS" in
> *cray-t3*)
> OPSYS=unicos-mpp
> ;;
> esac
> ;;
> esac
>
> cat >> confdefs.h <<EOF
>#define OS_NAME $OS_NAME
>EOF
>
> cat >> confdefs.h <<EOF
>#define OS_MAJOR $OS_MAJOR
>EOF
>
> echo "$ac_t""$OPSYS" 1>&6
>
>
> rm -f confdefs.missing
> for arg in port/master.mk; do
> case "$CONFIG_FILES" in
> *$arg*)
> ;;
> *)
> CONFIG_FILES="${CONFIG_FILES-} $arg"
> ;;
> esac
> done
> for arg in port/Makefile; do
> case "$CONFIG_FILES" in
> *$arg*)
> ;;
> *)
> CONFIG_FILES="${CONFIG_FILES-} $arg"
> ;;
> esac
> done
> PORT_SUBDIRS=${PORT_SUBDIRS-""}
>
> PORT_MANIFEST=${PORT_MANIFEST-""}
>
>
> #
> # NB: We always want to define WHATIS to prevent the
> # $(MANDIR)/$(WHATIS) make(1) target from being just $(MANDIR)/ and
> # conflicting with the (directory creation) target with the same name.
> #
> WHATIS=whatis
> case `uname -sr` in
> BSD/OS*)
> # Can't generate a user-database -- only /usr/share/man/whatis.db.
> MAKEWHATIS_CMD=
> ;;
> 'IRIX64 6.5'|'IRIX 6.5')
> MAKEWHATIS_CMD='/usr/lib/makewhatis -M $(MANDIR) $(MANDIR)/whatis'
> ;;
> 'IRIX 6'*)
> # Can't generate a user-database.
> MAKEWHATIS_CMD=
> ;;
> HP-UX*)
> # Can't generate a user-database -- only /usr/lib/whatis.
> MAKEWHATIS_CMD=
> ;;
> 'Linux '*)
> # /usr/sbin/makewhatis doesn't work
> MAKEWHATIS_CMD=
> ;;
> ULTRIX*)
> # Can't generate a user-database -- only /usr/lib/whatis.
> MAKEWHATIS_CMD=
> ;;
> *)
> if test -r /usr/man/windex; then
> WHATIS=windex
> fi
> for ac_prog in catman makewhatis /usr/lib/makewhatis
>do
># Extract the first word of "$ac_prog", so it can be a program name with args.
>set dummy $ac_prog; ac_word=$2
>echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_prog'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$prog"; then
> ac_cv_prog_prog="$prog" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_prog="$ac_prog"
> break
> fi
> done
> IFS="$ac_save_ifs"
>fi
>fi
>prog="$ac_cv_prog_prog"
>if test -n "$prog"; then
> echo "$ac_t""$prog" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>
>test -n "$prog" && break
>done
>
> case "$prog" in
> *catman*)
> MAKEWHATIS_CMD=$prog' -w -M $(MANDIR)'
> ;;
> *makewhatis*)
> MAKEWHATIS_CMD=$prog' $(MANDIR)'
> ;;
> esac
> ;;
> esac
>
>
> echo $ac_n "checking for manual-page index command""... $ac_c" 1>&6
> echo "$ac_t""$MAKEWHATIS_CMD" 1>&6
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> #
> # Ensure that the CC variable is unset so that it can be
> # set here rather than by the autoconf-generated
> # configure-script preamble.
> #
> # unset CC
> #
> case ${CC-unset} in
> unset)
> case `uname -s` in
> AIX)
> for ac_prog in c89 xlc cc gcc
>do
># Extract the first word of "$ac_prog", so it can be a program name with args.
>set dummy $ac_prog; ac_word=$2
>echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$CC"; then
> ac_cv_prog_CC="$CC" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_CC="$ac_prog"
> break
> fi
> done
> IFS="$ac_save_ifs"
>fi
>fi
>CC="$ac_cv_prog_CC"
>if test -n "$CC"; then
> echo "$ac_t""$CC" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>
>test -n "$CC" && break
>done
> ;;
> HP-UX)
> for ac_prog in c89 cc gcc
>do
># Extract the first word of "$ac_prog", so it can be a program name with args.
>set dummy $ac_prog; ac_word=$2
>echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$CC"; then
> ac_cv_prog_CC="$CC" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_CC="$ac_prog"
> break
> fi
> done
> IFS="$ac_save_ifs"
>fi
>fi
>CC="$ac_cv_prog_CC"
>if test -n "$CC"; then
> echo "$ac_t""$CC" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>
>test -n "$CC" && break
>done
> ;;
> IRIX*)
> for ac_prog in cc gcc
>do
># Extract the first word of "$ac_prog", so it can be a program name with args.
>set dummy $ac_prog; ac_word=$2
>echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$CC"; then
> ac_cv_prog_CC="$CC" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_CC="$ac_prog"
> break
> fi
> done
> IFS="$ac_save_ifs"
>fi
>fi
>CC="$ac_cv_prog_CC"
>if test -n "$CC"; then
> echo "$ac_t""$CC" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>
>test -n "$CC" && break
>done
> ;;
> OSF1|ULTRIX)
> for ac_prog in cc gcc
>do
># Extract the first word of "$ac_prog", so it can be a program name with args.
>set dummy $ac_prog; ac_word=$2
>echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$CC"; then
> ac_cv_prog_CC="$CC" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_CC="$ac_prog"
> break
> fi
> done
> IFS="$ac_save_ifs"
>fi
>fi
>CC="$ac_cv_prog_CC"
>if test -n "$CC"; then
> echo "$ac_t""$CC" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>
>test -n "$CC" && break
>done
> case "$CC" in
> cc)
> case `uname -m` in
> VAX)
> ;;
> *)
> for arg in -std; do
> case "$CPPFLAGS" in
> *$arg*)
> ;;
> *)
> CPPFLAGS="${CPPFLAGS-} $arg"
> ;;
> esac
> done
> ;;
> esac
> ;;
> esac
> ;;
> SunOS)
> case `uname -r` in
> 4*)
> for ac_prog in acc cc gcc
>do
># Extract the first word of "$ac_prog", so it can be a program name with args.
>set dummy $ac_prog; ac_word=$2
>echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$CC"; then
> ac_cv_prog_CC="$CC" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_CC="$ac_prog"
> break
> fi
> done
> IFS="$ac_save_ifs"
>fi
>fi
>CC="$ac_cv_prog_CC"
>if test -n "$CC"; then
> echo "$ac_t""$CC" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>
>test -n "$CC" && break
>done
> ;;
> 5*)
> for ac_prog in cc gcc
>do
># Extract the first word of "$ac_prog", so it can be a program name with args.
>set dummy $ac_prog; ac_word=$2
>echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$CC"; then
> ac_cv_prog_CC="$CC" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_CC="$ac_prog"
> break
> fi
> done
> IFS="$ac_save_ifs"
>fi
>fi
>CC="$ac_cv_prog_CC"
>if test -n "$CC"; then
> echo "$ac_t""$CC" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>
>test -n "$CC" && break
>done
> #
># The following is commented-out because
># the configure script uses CPPFLAGS when
># compiling C++ source and SunOS 5's CC (at
># least) emits error messages when given the
># -Xa option causing the configure script to
># abandon `$CXX -E' in favor of `/lib/cpp'.
>#
># case "$CC" in
># *gcc*)
># ;;
># *)
># UC_ENSURE(CPPFLAGS, -Xa) dnl
># ;;
># esac
> ;;
> esac
> ;;
> *)
> for ac_prog in c89 cc gcc
>do
># Extract the first word of "$ac_prog", so it can be a program name with args.
>set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$CC"; then
> ac_cv_prog_CC="$CC" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_CC="$ac_prog"
> break
> fi
> done
> IFS="$ac_save_ifs"
>fi
>fi
>CC="$ac_cv_prog_CC"
>if test -n "$CC"; then
> echo "$ac_t""$CC" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>
>test -n "$CC" && break
>done
> ;;
> esac
> ;;
> *)
> echo $ac_n "checking for C compiler""... $ac_c" 1>&6
> echo "$ac_t""$CC" 1>&6
> ;;
> esac
> case "${CC-}" in
> '')
> echo "CC:C compiler:/bin/cc" >> confdefs.missing
> ;;
> *)
> # Find out if we are using GNU C, under whatever name.
> cat <<UD_EOF > conftest.c
>#ifdef __GNUC__
> yes
>#endif
>UD_EOF
> ${CC} -E conftest.c > conftest.out 2>&1
> if egrep yes conftest.out >/dev/null 2>&1; then
> GCC=1 # For later tests.
> fi
> case `uname -s` in
> AIX)
> for arg in -D_ALL_SOURCE; do
> case "$CPPFLAGS" in
> *$arg*)
> ;;
> *)
> CPPFLAGS="${CPPFLAGS-} $arg"
> ;;
> esac
> done
> cat >> confdefs.h <<\EOF
>#define _ALL_SOURCE 1
>EOF
> ;;
> HP-UX)
> for arg in -D_HPUX_SOURCE; do
> case "$CPPFLAGS" in
> *$arg*)
> ;;
> *)
> CPPFLAGS="${CPPFLAGS-} $arg"
> ;;
> esac
> done
> cat >> confdefs.h <<\EOF
>#define _HPUX_SOURCE 1
>EOF
> ;;
> esac
> ;;
> esac
> rm -f conftest*
>
> echo $ac_n "checking for dependency generation mechanism""... $ac_c" 1>&6
>if test -z "$CC_MAKEDEPEND"; then
> case ${GCC-}${OPSYS} in
> convexos)
> CC_MAKEDEPEND="$CC -k"
> ;;
> hpux)
> CC_MAKEDEPEND="$CC -c -Wp,-M"
> ;;
> sunos5)
> CC_MAKEDEPEND="$CC -xM"
> ;;
> unicos)
> #
> # UNICOS's C compiler has an unusual way of invoking the
> # dependency-generation option. Also, the c89(1) compiler
> # doesn't even have way of doing this.
> #
> #
> CC_MAKEDEPEND="cc -c -Wp,-M"
> ;;
> ultrix)
> CC_MAKEDEPEND="$CC -Em"
> ;;
> *)
> CC_MAKEDEPEND="$CC -M"
> ;;
> esac
>fi
> echo "$ac_t""$CC_MAKEDEPEND" 1>&6
>
> echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
># On Suns, sometimes $CPP names a directory.
>if test -n "$CPP" && test -d "$CPP"; then
> CPP=
>fi
>if test -z "$CPP"; then
>if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> # This must be in double quotes, not single quotes, because CPP may get
> # substituted into the Makefile and "${CC-cc}" will confuse make.
> CPP="${CC-cc} -E"
> # On the NeXT, cc -E runs the code through the compiler's parser,
> # not just through cpp.
> cat > conftest.$ac_ext <<EOF
>#line 1099 "configure"
>#include "confdefs.h"
>#include <assert.h>
>Syntax Error
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:1105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> :
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> CPP="${CC-cc} -E -traditional-cpp"
> cat > conftest.$ac_ext <<EOF
>#line 1114 "configure"
>#include "confdefs.h"
>#include <assert.h>
>Syntax Error
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:1120: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> :
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> CPP=/lib/cpp
>fi
>rm -f conftest*
>fi
>rm -f conftest*
> ac_cv_prog_CPP="$CPP"
>fi
> CPP="$ac_cv_prog_CPP"
>else
> ac_cv_prog_CPP="$CPP"
>fi
>echo "$ac_t""$CPP" 1>&6
> echo $ac_n "checking the C preprocessor""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 1141 "configure"
>#include "confdefs.h"
>#include <stdlib.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:1146: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> echo "$ac_t""works" 1>&6
>else
> echo "$ac_err" >&5
> rm -rf conftest*
>
> echo "configure: warning: C preprocessor, \`$CPP', doesn't w
> ork" 1>&2
> echo "CPP:C preprocessor:/lib/cpp" >> confdefs.missing
>
>
>fi
>rm -f conftest*
>
>
> echo $ac_n "checking for C const""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 1165 "configure"
>#include "confdefs.h"
>
>int main() { return 0; }
>int t() {
>/* Ultrix mips cc rejects this. */
> typedef int charset[2]; const charset x;
>
>; return 0; }
>EOF
>if { (eval echo configure:1175: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""yes" 1>&6
>else
> rm -rf conftest*
>
> UD_NO_CONST="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_CONST 1
>EOF
>
> echo "$ac_t""no" 1>&6
>
>
>fi
>rm -f conftest*
>
>
> echo $ac_n "checking for C volatile""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 1195 "configure"
>#include "confdefs.h"
>
>int main() { return 0; }
>int t() {
>typedef int charset[2]; volatile charset x;
>; return 0; }
>EOF
>if { (eval echo configure:1203: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""yes" 1>&6
>else
> rm -rf conftest*
>
> echo "$ac_t""no" 1>&6
> UD_NO_VOLATILE="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_VOLATILE 1
>EOF
>
>
>
>
>fi
>rm -f conftest*
>
> echo $ac_n "checking for C signed""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 1223 "configure"
>#include "confdefs.h"
>
>int main() { return 0; }
>int t() {
>signed char x;
>; return 0; }
>EOF
>if { (eval echo configure:1231: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""yes" 1>&6
>else
> rm -rf conftest*
>
> echo "$ac_t""no" 1>&6
> UD_NO_SIGNED="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_SIGNED 1
>EOF
>
>
>
>
>fi
>rm -f conftest*
>
> echo $ac_n "checking for C function prototypes""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 1251 "configure"
>#include "confdefs.h"
>
>int main() { return 0; }
>int t() {
>extern int foo(int bar);
>; return 0; }
>EOF
>if { (eval echo configure:1259: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""yes" 1>&6
>else
> rm -rf conftest*
>
> echo "$ac_t""no" 1>&6
> UD_NO_PROTOTYPES="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_PROTOTYPES 1
>EOF
>
>
>
>
>fi
>rm -f conftest*
>
> for arg in stdarg.h.in; do
> case "$PORT_MANIFEST" in
> *$arg*)
> ;;
> *)
> PORT_MANIFEST="${PORT_MANIFEST-} $arg"
> ;;
> esac
> done
> echo $ac_n "checking for standard C variadic functions""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 1288 "configure"
>#include "confdefs.h"
>#include <stdarg.h>
>int main() { return 0; }
>int t() {
>
> }
> int foo(int bar, ...) {
> va_list alist;
> va_start(alist, bar);
> bar = (int)va_arg(alist, int);
> va_end(alist);
>
>; return 0; }
>EOF
>if { (eval echo configure:1303: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
>
> echo "$ac_t""yes" 1>&6
> echo "#include <stdarg.h>" > conftestpath.c
> #
> # We add additional `/'s to the header file name to preclude compiler
> # warnings about the non-portability of `#include "/usr/include/..."'.
> #
> case `uname -s`${GCC-} in
> AIX)
> #
> # AIX's C compiler doesn't emit a line that gives the pathname of
> # the included file.
> #
> # AIX's C compiler puts dependency information in a `.u' file.
> #
> # AIX 4.1's cc(1) makes the following complaint:
> # ld: 0711-317 ERROR: Undefined symbol: .main
> #
> # AIX 4.1's ksh(1) has problems with `2>&5' so we redirect to
> # /dev/null.
> #
> $CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>/dev/null
> path=`sed -n '/[^\/]*\(\/[^ ]*stdarg\.h\).*/s//\1/p' \
> conftestpath.u | head -1`
> rm conftestpath.u
> ;;
> HP-UX)
> #
> # HP-UX's C compiler doesn't have a dependency-generation option,
> # so we use another method.
> #
> path=`$CC -E $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*stdarg\.h\).*/s//\1/p' |
> head -1`
> ;;
> *)
> path=`$CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*stdarg\.h\).*/s//\1/p' |
> head -1`
> ;;
> esac
> case "$path" in
> '')
> path=/dev/null
> ;;
> *)
> path=//$path
> ;;
> esac
> cat >> confdefs.h <<EOF
>#define UD_SYSTEM_STDARG_H "$path"
>EOF
>
>
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
>
>
>else
> rm -rf conftest*
>
> echo "$ac_t""no" 1>&6
> cat >> confdefs.h <<\EOF
>#define UD_NO_STDARG 1
>EOF
> echo "#include <varargs.h>" > conftestpath.c
> #
> # We add additional `/'s to the header file name to preclude compiler
> # warnings about the non-portability of `#include "/usr/include/..."'.
> #
> case `uname -s`${GCC-} in
> AIX)
> #
> # AIX's C compiler doesn't emit a line that gives the pathname of
> # the included file.
> #
> # AIX's C compiler puts dependency information in a `.u' file.
> #
> # AIX 4.1's cc(1) makes the following complaint:
> # ld: 0711-317 ERROR: Undefined symbol: .main
> #
> # AIX 4.1's ksh(1) has problems with `2>&5' so we redirect to
> # /dev/null.
> #
> $CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>/dev/null
> path=`sed -n '/[^\/]*\(\/[^ ]*varargs\.h\).*/s//\1/p' \
> conftestpath.u | head -1`
> rm conftestpath.u
> ;;
> HP-UX)
> #
> # HP-UX's C compiler doesn't have a dependency-generation option,
> # so we use another method.
> #
> path=`$CC -E $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*varargs\.h\).*/s//\1/p' |
> head -1`
> ;;
> *)
> path=`$CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*varargs\.h\).*/s//\1/p' |
> head -1`
> ;;
> esac
> case "$path" in
> '')
> path=/dev/null
> ;;
> *)
> path=//$path
> ;;
> esac
> cat >> confdefs.h <<EOF
>#define UD_SYSTEM_STDARG_H "$path"
>EOF
>
>
>
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
>
>
>
>fi
>rm -f conftest*
>
> echo $ac_n "checking for standard C string generation""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 1447 "configure"
>#include "confdefs.h"
># define MAKESTRING(x) #x
>int main() { return 0; }
>int t() {
>char *cp = MAKESTRING(foo);
>; return 0; }
>EOF
>if { (eval echo configure:1455: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""yes" 1>&6
>else
> rm -rf conftest*
>
> echo "$ac_t""no" 1>&6
> UD_NO_HASH="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_HASH 1
>EOF
>
>
>
>
>fi
>rm -f conftest*
>
> echo $ac_n "checking for standard C token pasting""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 1475 "configure"
>#include "confdefs.h"
>#define GLUE(a,b) a ## b
>int main() { return 0; }
>int t() {
>char *GLUE(c,p) = "foo";
>; return 0; }
>EOF
>if { (eval echo configure:1483: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""yes" 1>&6
>else
> rm -rf conftest*
>
> echo "$ac_t""no" 1>&6
> UD_NO_HASHHASH="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_HASHHASH 1
>EOF
>
>
>
>
>fi
>rm -f conftest*
>
>
> echo $ac_n "checking C void pointer""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 1504 "configure"
>#include "confdefs.h"
>
>int main() { return 0; }
>int t() {
>extern void *foo();
>; return 0; }
>EOF
>if { (eval echo configure:1512: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""yes" 1>&6
>else
> rm -rf conftest*
>
> echo "$ac_t""no" 1>&6
> UD_NO_VOIDSTAR="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_VOIDSTAR 1
>EOF
>
>
>
>
>fi
>rm -f conftest*
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> for arg in udposix.h.in; do
> case "$PORT_MANIFEST" in
> *$arg*)
> ;;
> *)
> PORT_MANIFEST="${PORT_MANIFEST-} $arg"
> ;;
> esac
> done
>
>
> # We use ar(1) under UNICOS even though bld(1) is preferred because bld(1)
># doesn't understand the "u" option.
># Extract the first word of "ar", so it can be a program name with args.
>set dummy ar; ac_word=$2
>echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$AR"; then
> ac_cv_prog_AR="$AR" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_AR="ar"
> break
> fi
> done
> IFS="$ac_save_ifs"
>fi
>fi
>AR="$ac_cv_prog_AR"
>if test -n "$AR"; then
> echo "$ac_t""$AR" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>if test -z "$AR"; then
> echo "AR:library utility:/bin/ar" >> confdefs.missing
>fi
>
>
> echo $ac_n "checking for tar flags""... $ac_c" 1>&6
>case "$OPSYS" in
> aix*)
> TARFLAGS=-chf
> ;;
> bsdos|irix*)
> TARFLAGS=-cLof
> ;;
> *)
> TARFLAGS=-chof
> ;;
>esac
>echo "$ac_t""$TARFLAGS" 1>&6
>
> # Extract the first word of "ranlib", so it can be a program name with arg
> s.
>set dummy ranlib; ac_word=$2
>echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$RANLIB"; then
> ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_RANLIB="ranlib"
> break
> fi
> done
> IFS="$ac_save_ifs"
> test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
>fi
>fi
>RANLIB="$ac_cv_prog_RANLIB"
>if test -n "$RANLIB"; then
> echo "$ac_t""$RANLIB" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>
> echo $ac_n "checking binary distribution directory""... $ac_c" 1>&6
> case ${FTPBINDIR-unset} in
> unset)
> system=`system 2>/dev/null || echo dummy_system`
> FTPBINDIR=${FTPDIR-/home/ftp}/pub/binary/$system
> ;;
> esac
> echo "$ac_t""$FTPBINDIR" 1>&6
>
> for arg in port/Makefile; do
> case "$CONFIG_FILES" in
> *$arg*)
> ;;
> *)
> CONFIG_FILES="${CONFIG_FILES-} $arg"
> ;;
> esac
> done
> for arg in port/master.mk; do
> case "$CONFIG_FILES" in
> *$arg*)
> ;;
> *)
> CONFIG_FILES="${CONFIG_FILES-} $arg"
> ;;
> esac
> done
> for arg in port/misc/Makefile; do
> case "$CONFIG_FILES" in
> *$arg*)
> ;;
> *)
> CONFIG_FILES="${CONFIG_FILES-} $arg"
> ;;
> esac
> done
> LIBOBJS=${LIBOBJS-""}
>
> PORT_HEADERS=${PORT_HEADERS-""}
>
> PORT_MANIFEST=${PORT_MANIFEST-""}
>
> PORT_SUBDIRS=${PORT_SUBDIRS-""}
>
>
> for arg in misc/all; do
> case "$PORT_ALL" in
> *$arg*)
> ;;
> *)
> PORT_ALL="${PORT_ALL-} $arg"
> ;;
> esac
> done
>
> for arg in misc/install; do
> case "$PORT_INSTALL" in
> *$arg*)
> ;;
> *)
> PORT_INSTALL="${PORT_INSTALL-} $arg"
> ;;
> esac
> done
>
> for arg in misc/clean; do
> case "$PORT_CLEAN" in
> *$arg*)
> ;;
> *)
> PORT_CLEAN="${PORT_CLEAN-} $arg"
> ;;
> esac
> done
>
> for arg in misc/distclean; do
> case "$PORT_DISTCLEAN" in
> *$arg*)
> ;;
> *)
> PORT_DISTCLEAN="${PORT_DISTCLEAN-} $arg"
> ;;
> esac
> done
>
>
>
> PORT_CPP_LDM=${PORT_CPP_LDM-""}
>
> udportdir=`pwd`/port/misc
> case "${OPSYS}$OS_MAJOR" in
> unicos*)
> case "$udportdir" in
> '') LD_UDPORT="-l udport";;
> *) LD_UDPORT="-L $udportdir -l udport";;
> esac
> ;;
> sunos5*)
> case "$udportdir" in
> '') LD_UDPORT="-ludport";;
> *) LD_UDPORT="-R$udportdir -L$udportdir -ludport";;
> esac
> ;;
> *)
> case "$udportdir" in
> '') LD_UDPORT="-ludport";;
> *) LD_UDPORT="-L$udportdir -ludport";;
> esac
> ;;
> esac
>
> unset udportdir
>
>
>
> for arg in udalloc.c udalloc.h; do
> case "$PORT_MANIFEST" in
> *$arg*)
> ;;
> *)
> PORT_MANIFEST="${PORT_MANIFEST-} $arg"
> ;;
> esac
> done
>
> echo $ac_n "checking the installation prefix""...
> $ac_c" 1>&6
> case ${prefix-} in
> NONE|'') prefix=`case ".." in
> /*) echo ..; exit;;
> *) path=\`pwd\`/..
> tail=
> while test "$path"; do
> (cd $path && echo \`pwd\`$rest) && exit
> base=/\`basename "$path"\`
> tail=/$base$tail
> path=\`echo "$path" | sed "s/\/$base//"\`
> done;;
>esac
>`;;
> esac
> echo "$ac_t""$prefix" 1>&6
> echo $ac_n "checking the installation exec-prefix""... $ac_c" 1>&6
> case ${exec_prefix-} in
> NONE|'')
> exec_prefix=$prefix;;
> esac
> echo "$ac_t""$exec_prefix" 1>&6
>
>
>CFLAGS=${CFLAGS-"-O"}
>
>
>CPPFLAGS=${CPPFLAGS-""}
>
>
>
># Extract the first word of "neqn", so it can be a program name with args.
>set dummy neqn; ac_word=$2
>echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_NEQN'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$NEQN"; then
> ac_cv_prog_NEQN="$NEQN" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_NEQN="neqn"
> break
> fi
> done
> IFS="$ac_save_ifs"
> test -z "$ac_cv_prog_NEQN" && ac_cv_prog_NEQN="cat"
>fi
>fi
>NEQN="$ac_cv_prog_NEQN"
>if test -n "$NEQN"; then
> echo "$ac_t""$NEQN" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>test "$NEQN" = cat &&
> echo "configure: warning: $0: Can't find program \`neqn'; setting to \`cat'"
> 1>&2
>
># Extract the first word of "tbl", so it can be a program name with args.
>set dummy tbl; ac_word=$2
>echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_TBL'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$TBL"; then
> ac_cv_prog_TBL="$TBL" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_TBL="tbl"
> break
> fi
> done
> IFS="$ac_save_ifs"
> test -z "$ac_cv_prog_TBL" && ac_cv_prog_TBL="cat"
>fi
>fi
>TBL="$ac_cv_prog_TBL"
>if test -n "$TBL"; then
> echo "$ac_t""$TBL" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>test "$TBL" = cat &&
> echo "configure: warning: $0: Can't find program \`tbl'; setting to \`cat'"
> 1>&2
>
># We use ar(1) under UNICOS even though bld(1) is preferred because bld(1)
># doesn't understand the "u" option.
># Extract the first word of "ar", so it can be a program name with args.
>set dummy ar; ac_word=$2
>echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$AR"; then
> ac_cv_prog_AR="$AR" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_AR="ar"
> break
> fi
> done
> IFS="$ac_save_ifs"
>fi
>fi
>AR="$ac_cv_prog_AR"
>if test -n "$AR"; then
> echo "$ac_t""$AR" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>if test -z "$AR"; then
> echo "AR:library utility:/bin/ar" >> confdefs.missing
>fi
>
>
>
>libdir=`pwd`/lib
> case "${OPSYS}$OS_MAJOR" in
> unicos*)
> case "$libdir" in
> '') LD_UDUNITS="-l udunits";;
> *) LD_UDUNITS="-L $libdir -l udunits";;
> esac
> ;;
> sunos5*)
> case "$libdir" in
> '') LD_UDUNITS="-ludunits";;
> *) LD_UDUNITS="-R$libdir -L$libdir -ludunits";;
> esac
> ;;
> *)
> case "$libdir" in
> '') LD_UDUNITS="-ludunits";;
> *) LD_UDUNITS="-L$libdir -ludunits";;
> esac
> ;;
> esac
>
>
> case `uname` in
> Linux)
> LD_YACC=${LD_YACC-""}
>
> ;;
> *) echo $ac_n "checking for yacc library""... $ac_c" 1>&6
> case "${LD_YACC+set}" in
> set)
> echo "$ac_t""$LD_YACC" 1>&6
> ;;
> *)
> echo "$ac_t""" 1>&6
> LIBS_save=$LIBS
> found=no
> echo $ac_n "checking for yyerror("") in default library(s)""... $ac_c"
> 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 1920 "configure"
>#include "confdefs.h"
>
>int main() { return 0; }
>int t() {
>yyerror("");
>; return 0; }
>EOF
>if { (eval echo configure:1928: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
>
> echo "$ac_t""yes" 1>&6
> LD_YACC=
> found=yes
>
>else
> rm -rf conftest*
>
> echo "$ac_t""no" 1>&6
> os=`uname -s`
> for dir in '' ; do
> for lib in y; do
> case "${OPSYS}$OS_MAJOR" in
> unicos*)
case "$dir" in
> '') LIBS="-l $lib";;
> *) LIBS="-L $dir -l $lib";;
> esac
> ;;
> sunos5*)
> case "$dir" in
> '') LIBS="-l$lib";;
> *) LIBS="-R$dir -L$dir -l$lib";;
> esac
> ;;
> *)
> case "$dir" in
> '') LIBS="-l$lib";;
> *) LIBS="-L$dir -l$lib";;
> esac
> ;;
> esac
>
> echo $ac_n "checking for yyerror("") in $LIBS""
> ... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 1965 "configure"
>#include "confdefs.h"
>
>int main() { return 0; }
>int t() {
>yyerror("");
>; return 0; }
>EOF
>if { (eval echo configure:1973: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
>
> echo "$ac_t""yes" 1>&6
> LD_YACC=$LIBS
> found=yes
> break 2
>
>fi
>rm -f conftest*
> echo "$ac_t""no" 1>&6
> done
> done
>
>fi
>rm -f conftest*
> LIBS=$LIBS_save
> case $found in
> no) echo "LD_YACC:yacc library:-ly" >> confdefs.missing
> ;;
> esac
> ;;
> esac
> ;;
> esac
>
> echo $ac_n "checking for C math library""... $ac_c" 1>&6
> case "${LD_MATH+set}" in
> set)
> echo "$ac_t""$LD_MATH" 1>&6
> ;;
> *)
> echo "$ac_t""" 1>&6
> LIBS_save=$LIBS
> found=no
> echo $ac_n "checking for (void)sin(0.0) in default library(s)""... $ac_
> c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 2010 "configure"
>#include "confdefs.h"
>
>int main() { return 0; }
>int t() {
>(void)sin(0.0);
>; return 0; }
>EOF
>if { (eval echo configure:2018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
>
> echo "$ac_t""yes" 1>&6
> LD_MATH=
> found=yes
>
>else
> rm -rf conftest*
>
> echo "$ac_t""no" 1>&6
> os=`uname -s`
> for dir in '' ; do
> for lib in m; do
> case "${OPSYS}$OS_MAJOR" in
> unicos*)
> case "$dir" in
> '') LIBS="-l $lib";;
> *) LIBS="-L $dir -l $lib";;
> esac
> ;;
> sunos5*)
> case "$dir" in
> '') LIBS="-l$lib";;
> *) LIBS="-R$dir -L$dir -l$lib";;
> esac
> ;;
> *)
> case "$dir" in
> '') LIBS="-l$lib";;
> *) LIBS="-L$dir -l$lib";;
> esac
> ;;
> esac
>
> echo $ac_n "checking for (void)sin(0.0) in $LIB
> S""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 2055 "configure"
>#include "confdefs.h"
>
>int main() { return 0; }
>int t() {
>(void)sin(0.0);
>; return 0; }
>EOF
>if { (eval echo configure:2063: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
>
> echo "$ac_t""yes" 1>&6
> LD_MATH=$LIBS
> found=yes
> break 2
>
>fi
>rm -f conftest*
> echo "$ac_t""no" 1>&6
> done
> done
>
>fi
>rm -f conftest*
> LIBS=$LIBS_save
> case $found in
> no) echo "LD_MATH:C math library:-L/opt/SUNWspro/SC3.0/lib -lm" >>
> confdefs.missing
> ;;
> esac
> ;;
> esac
>
>
> for arg in port/cfortran/Makefile; do
> case "$CONFIG_FILES" in
> *$arg*)
> ;;
> *)
> CONFIG_FILES="${CONFIG_FILES-} $arg"
> ;;
> esac
> done
> echo $ac_n "checking style for cfortran.h""... $ac_c" 1>&6
> for arg in cfortran; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
> for arg in cfortran/all; do
> case "$PORT_ALL" in
> *$arg*)
> ;;
> *)
> PORT_ALL="${PORT_ALL-} $arg"
> ;;
> esac
> done
> for arg in cfortran/install; do
> case "$PORT_INSTALL" in
> *$arg*)
> ;;
> *)
> PORT_INSTALL="${PORT_INSTALL-} $arg"
> ;;
> esac
> done
> for arg in cfortran/clean; do
> case "$PORT_CLEAN" in
> *$arg*)
> ;;
> *)
> PORT_CLEAN="${PORT_CLEAN-} $arg"
> ;;
> esac
> done
> for arg in cfortran/distclean; do
> case "$PORT_DISTCLEAN" in
> *$arg*)
> ;;
> *)
> PORT_DISTCLEAN="${PORT_DISTCLEAN-} $arg"
> ;;
> esac
> done
>case "${UD_NO_HASHHASH-}" in
> 1) CFORTRAN_TYPE=Reiser
> ;;
> *) CFORTRAN_TYPE=Standard
> ;;
>esac
>
>echo "$ac_t""$CFORTRAN_TYPE" 1>&6
>
>case "$OPSYS" in
> aix*)
> # Ensure adherence to the trailing-underscore convention.
> for arg in -Dextname; do
> case "$CPPFLAGS" in
> *$arg*)
> ;;
> *)
> CPPFLAGS="${CPPFLAGS-} $arg"
> ;;
> esac
> done
> for arg in -qextname; do
> case "$FFLAGS" in
> *$arg*)
> ;;
> *)
> FFLAGS="${FFLAGS-} $arg"
> ;;
> esac
> done
> ;;
> hp*)
> # Ensure adherence to the trailing-underscore convention.
> for arg in -Dextname; do
> case "$CPPFLAGS" in
> *$arg*)
> ;;
> *)
> CPPFLAGS="${CPPFLAGS-} $arg"
> ;;
> esac
> done
> for arg in +ppu; do
> case "$FFLAGS" in
> *$arg*)
> ;;
> *)
> FFLAGS="${FFLAGS-} $arg"
> ;;
> esac
> done
> ;;
>esac
>
>
> for arg in stddef.h.in; do
> case "$PORT_MANIFEST" in
> *$arg*)
> ;;
> *)
> PORT_MANIFEST="${PORT_MANIFEST-} $arg"
> ;;
> esac
> done
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
> echo "#include <stddef.h>" > conftestpath.c
> #
> # We add additional `/'s to the header file name to preclude compiler
> # warnings about the non-portability of `#include "/usr/include/..."'.
> #
> case `uname -s`${GCC-} in
> AIX)
> #
> # AIX's C compiler doesn't emit a line that gives the pathname of
> # the included file.
> #
> # AIX's C compiler puts dependency information in a `.u' file.
> #
> # AIX 4.1's cc(1) makes the following complaint:
> # ld: 0711-317 ERROR: Undefined symbol: .main
> #
> # AIX 4.1's ksh(1) has problems with `2>&5' so we redirect to
> # /dev/null.
> #
> $CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>/dev/null
> path=`sed -n '/[^\/]*\(\/[^ ]*stddef\.h\).*/s//\1/p' \
> conftestpath.u | head -1`
> rm conftestpath.u
> ;;
> HP-UX)
> #
> # HP-UX's C compiler doesn't have a dependency-generation option,
> # so we use another method.
> #
> path=`$CC -E $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*stddef\.h\).*/s//\1/p' |
> head -1`
> ;;
> *)
> path=`$CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*stddef\.h\).*/s//\1/p' |
> head -1`
> ;;
> esac
> case "$path" in
> '')
> path=/dev/null
> ;;
> *)
> path=//$path
> ;;
> esac
> cat >> confdefs.h <<EOF
>#define UD_SYSTEM_STDDEF_H "$path"
>EOF
>
>
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
> ac_safe=`echo "stddef.h" | tr './\055' '___'`
>echo $ac_n "checking for stddef.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 2283 "configure"
>#include "confdefs.h"
>#include <stddef.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:2288: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <stddef.h> for typedef size_t"".
> .. $ac_c" 1>&6
> echo '#include <stddef.h>' >conftest.c
> if ($CPP conftest.c | grep size_t >/dev/null) 2>&5; then
> echo "$ac_t""declared" 1>&6
> rm conftest.c
> else
> cat > conftest.$ac_ext <<EOF
>#line 2309 "configure"
>#include "confdefs.h"
>#include <stddef.h>
> int size_t;
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:2319: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
>
> echo "$ac_t""undeclared" 1>&6
> cat >> confdefs.h <<\EOF
>#define UD_NO_STDDEF_H_SIZE_T 1
>EOF
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
> fi
>
>else
> echo "$ac_t""no" 1>&6
>
> cat >> confdefs.h <<\EOF
>#define UD_NO_STDDEF_H_SIZE_T 1
>EOF
>
>fi
> ac_safe=`echo "stddef.h" | tr './\055' '___'`
>echo $ac_n "checking for stddef.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 2349 "configure"
>#include "confdefs.h"
>#include <stddef.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:2354: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <stddef.h> for typedef ptrdiff_t
> ""... $ac_c" 1>&6
> echo '#include <stddef.h>' >conftest.c
> if ($CPP conftest.c | grep ptrdiff_t >/dev/null) 2>&5; then
> echo "$ac_t""declared" 1>&6
> rm conftest.c
> else
> cat > conftest.$ac_ext <<EOF
>#line 2375 "configure"
>#include "confdefs.h"
>#include <stddef.h>
> int ptrdiff_t;
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:2385: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
>
> echo "$ac_t""undeclared" 1>&6
> cat >> confdefs.h <<\EOF
>#define UD_NO_STDDEF_H_PTRDIFF_T 1
>EOF
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
> fi
>
>else
> echo "$ac_t""no" 1>&6
>
> cat >> confdefs.h <<\EOF
>#define UD_NO_STDDEF_H_PTRDIFF_T 1
>EOF
>
>fi
>
> for arg in config.c; do
> case "$PORT_MANIFEST" in
> *$arg*)
> ;;
> *)
> PORT_MANIFEST="${PORT_MANIFEST-} $arg"
> ;;
> esac
> done
> ac_safe=`echo "float.h" | tr './\055' '___'`
>echo $ac_n "checking for float.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 2425 "configure"
>#include "confdefs.h"
>#include <float.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:2430: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> cat > conftest.$ac_ext <<EOF
#line 2445 "configure"
>#include "confdefs.h"
>
>#include <float.h>
>#ifdef DBL_DIG
>#include "DBL_DIG is defined" /* hard error in case warnings suppressed*/
>#endif
>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:2455: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
>
> for arg in float.h; do
> case "$PORT_HEADERS" in
> *$arg*)
> ;;
> *)
> PORT_HEADERS="${PORT_HEADERS-} $arg"
> ;;
> esac
> done
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
> echo "$ac_t""supplying own" 1>&6
>
>
>else
> echo "$ac_err" >&5
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> for arg in float.h; do
> case "$PORT_HEADERS" in
> *$arg*)
> ;;
> *)
> PORT_HEADERS="${PORT_HEADERS-} $arg"
> ;;
> esac
> done
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
> echo "$ac_t""supplying own" 1>&6
>
>
>fi
>
>
> for arg in stdlib.h.in atexit.c; do
> case "$PORT_MANIFEST" in
> *$arg*)
> ;;
> *)
> PORT_MANIFEST="${PORT_MANIFEST-} $arg"
> ;;
> esac
> done
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
> echo "#include <stdlib.h>" > conftestpath.c
> #
> # We add additional `/'s to the header file name to preclude compiler
> # warnings about the non-portability of `#include "/usr/include/..."'.
> #
> case `uname -s`${GCC-} in
> AIX)
> #
> # AIX's C compiler doesn't emit a line that gives the pathname of
> # the included file.
> #
> # AIX's C compiler puts dependency information in a `.u' file.
> #
> # AIX 4.1's cc(1) makes the following complaint:
> # ld: 0711-317 ERROR: Undefined symbol: .main
> #
> # AIX 4.1's ksh(1) has problems with `2>&5' so we redirect to
> # /dev/null.
> #
> $CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>/dev/null
> path=`sed -n '/[^\/]*\(\/[^ ]*stdlib\.h\).*/s//\1/p' \
> conftestpath.u | head -1`
> rm conftestpath.u
> ;;
> HP-UX)
> #
> # HP-UX's C compiler doesn't have a dependency-generation option,
> # so we use another method.
> #
> path=`$CC -E $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*stdlib\.h\).*/s//\1/p' |
> head -1`
> ;;
> *)
> path=`$CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*stdlib\.h\).*/s//\1/p' |
> head -1`
> ;;
> esac
> case "$path" in
> '')
> path=/dev/null
> ;;
> *)
> path=//$path
> ;;
> esac
> cat >> confdefs.h <<EOF
>#define UD_SYSTEM_STDLIB_H "$path"
>EOF
>
>
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
> ac_safe=`echo "stdlib.h" | tr './\055' '___'`
>echo $ac_n "checking for stdlib.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 2598 "configure"
>#include "confdefs.h"
>#include <stdlib.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:2603: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <stdlib.h> for typedef size_t"".
> .. $ac_c" 1>&6
> echo '#include <stdlib.h>' >conftest.c
> if ($CPP conftest.c | grep size_t >/dev/null) 2>&5; then
> echo "$ac_t""declared" 1>&6
> rm conftest.c
> else
> cat > conftest.$ac_ext <<EOF
>#line 2624 "configure"
>#include "confdefs.h"
>#include <stdlib.h>
> int size_t;
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:2634: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
>
> echo "$ac_t""undeclared" 1>&6
> cat >> confdefs.h <<\EOF
>#define UD_NO_STDLIB_H_SIZE_T 1
>EOF
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
> fi
>
>else
> echo "$ac_t""no" 1>&6
>
> cat >> confdefs.h <<\EOF
>#define UD_NO_STDLIB_H_SIZE_T 1
>EOF
>
>fi
> for ac_func in atexit
>do
>echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 2665 "configure"
>#include "confdefs.h"
>/* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char $ac_func(); below. */
>#include <assert.h>
>/* Override any gcc2 internal prototype to avoid an error. */
>char $ac_func();
>
>int main() { return 0; }
>int t() {
>
>/* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
>#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
>choke me
>#else
>$ac_func();
>#endif
>
>; return 0; }
>EOF
>if { (eval echo configure:2687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=yes"
>else
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=no"
>fi
>rm -f conftest*
>
>fi
>if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> :
>else
> echo "$ac_t""no" 1>&6
>LIBOBJS="$LIBOBJS ${ac_func}.o"
>fi
>
>done
> ac_safe=`echo "stdlib.h" | tr './\055' '___'`
>echo $ac_n "checking for stdlib.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 2712 "configure"
>#include "confdefs.h"
>#include <stdlib.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:2717: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <stdlib.h> for function atexit()
> ""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 2733 "configure"
>#include "confdefs.h"
>#include <stdlib.h>
> extern struct {int a; int b;} *atexit();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:2743: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_ATEXIT_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_ATEXIT_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_ATEXIT_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_ATEXIT_DECL 1
>EOF
>
>
>fi
> for ac_func in getenv
>do
>echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 2778 "configure"
>#include "confdefs.h"
>/* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char $ac_func(); below. */
>#include <assert.h>
>/* Override any gcc2 internal prototype to avoid an error. */
>char $ac_func();
>
>int main() { return 0; }
>int t() {
>
>/* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
>#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
>choke me
>#else
>$ac_func();
>#endif
>
>; return 0; }
>EOF
>if { (eval echo configure:2800: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=yes"
>else
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=no"
>fi
>rm -f conftest*
>
>fi
>if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> :
>else
> echo "$ac_t""no" 1>&6
>LIBOBJS="$LIBOBJS ${ac_func}.o"
>fi
>
>done
> ac_safe=`echo "stdlib.h" | tr './\055' '___'`
>echo $ac_n "checking for stdlib.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 2825 "configure"
>#include "confdefs.h"
>#include <stdlib.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:2830: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <stdlib.h> for function getenv()
> ""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 2846 "configure"
>#include "confdefs.h"
>#include <stdlib.h>
> extern struct {int a; int b;} *getenv();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:2856: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_GETENV_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_GETENV_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_GETENV_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_GETENV_DECL 1
>EOF
>
>
>
>fi
>
> for arg in strerror.c strstr.c string.h.in memmove.c; do
> case "$PORT_MANIFEST" in
> *$arg*)
> ;;
> *)
> PORT_MANIFEST="${PORT_MANIFEST-} $arg"
> ;;
> esac
> done
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
> echo "#include <string.h>" > conftestpath.c
> #
> # We add additional `/'s to the header file name to preclude compiler
> # warnings about the non-portability of `#include "/usr/include/..."'.
> #
> case `uname -s`${GCC-} in
> AIX)
> #
> # AIX's C compiler doesn't emit a line that gives the pathname of
> # the included file.
> #
> # AIX's C compiler puts dependency information in a `.u' file.
> #
> # AIX 4.1's cc(1) makes the following complaint:
> # ld: 0711-317 ERROR: Undefined symbol: .main
> #
> # AIX 4.1's ksh(1) has problems with `2>&5' so we redirect to
> # /dev/null.
> #
> $CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>/dev/null
> path=`sed -n '/[^\/]*\(\/[^ ]*string\.h\).*/s//\1/p' \
> conftestpath.u | head -1`
> rm conftestpath.u
> ;;
> HP-UX)
> #
> # HP-UX's C compiler doesn't have a dependency-generation option,
> # so we use another method.
> #
> path=`$CC -E $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*string\.h\).*/s//\1/p' |
> head -1`
> ;;
> *)
> path=`$CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*string\.h\).*/s//\1/p' |
> head -1`
> ;;
> esac
> case "$path" in
> '')
> path=/dev/null
> ;;
> *)
> path=//$path
> ;;
> esac
> cat >> confdefs.h <<EOF
>#define UD_SYSTEM_STRING_H "$path"
>EOF
>
>
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
> ac_safe=`echo "string.h" | tr './\055' '___'`
>echo $ac_n "checking for string.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 2970 "configure"
>#include "confdefs.h"
>#include <string.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:2975: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <string.h> for typedef size_t"".
> .. $ac_c" 1>&6
> echo '#include <string.h>' >conftest.c
> if ($CPP conftest.c | grep size_t >/dev/null) 2>&5; then
> echo "$ac_t""declared" 1>&6
> rm conftest.c
> else
> cat > conftest.$ac_ext <<EOF
>#line 2996 "configure"
>#include "confdefs.h"
>#include <string.h>
> int size_t;
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:3006: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
>
> echo "$ac_t""undeclared" 1>&6
> cat >> confdefs.h <<\EOF
>#define UD_NO_STRING_H_SIZE_T 1
>EOF
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
> fi
>
>else
> echo "$ac_t""no" 1>&6
>
> cat >> confdefs.h <<\EOF
>#define UD_NO_STRING_H_SIZE_T 1
>EOF
>
>fi
> for ac_func in strerror
>do
>echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3037 "configure"
>#include "confdefs.h"
>/* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char $ac_func(); below. */
>#include <assert.h>
>/* Override any gcc2 internal prototype to avoid an error. */
>char $ac_func();
>
>int main() { return 0; }
>int t() {
>
>/* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
>#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
>choke me
>#else
>$ac_func();
>#endif
>
>; return 0; }
>EOF
>if { (eval echo configure:3059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=yes"
>else
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=no"
>fi
>rm -f conftest*
>
>fi
>if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> :
>else
> echo "$ac_t""no" 1>&6
>LIBOBJS="$LIBOBJS ${ac_func}.o"
>fi
>
>done
> ac_safe=`echo "string.h" | tr './\055' '___'`
>echo $ac_n "checking for string.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3084 "configure"
>#include "confdefs.h"
>#include <string.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:3089: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <string.h> for function strerror
> ()""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 3105 "configure"
>#include "confdefs.h"
>#include <string.h>
> extern struct {int a; int b;} *strerror();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:3115: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_STRERROR_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRERROR_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_STRERROR_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRERROR_DECL 1
>EOF
>
>
>
>fi
> ac_safe=`echo "string.h" | tr './\055' '___'`
>echo $ac_n "checking for string.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3149 "configure"
>#include "confdefs.h"
>#include <string.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:3154: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <string.h> for function strchr()
> ""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 3170 "configure"
>#include "confdefs.h"
>#include <string.h>
> extern struct {int a; int b;} *strchr();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:3180: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_STRCHR_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRCHR_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_STRCHR_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRCHR_DECL 1
>EOF
>
>
>
>fi
> ac_safe=`echo "string.h" | tr './\055' '___'`
>echo $ac_n "checking for string.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3214 "configure"
>#include "confdefs.h"
>#include <string.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:3219: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <string.h> for function strcpy()
> ""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 3235 "configure"
>#include "confdefs.h"
>#include <string.h>
> extern struct {int a; int b;} *strcpy();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:3245: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_STRCPY_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRCPY_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_STRCPY_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRCPY_DECL 1
>EOF
>
>
>
>fi
> ac_safe=`echo "string.h" | tr './\055' '___'`
>echo $ac_n "checking for string.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3279 "configure"
>#include "confdefs.h"
>#include <string.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:3284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <string.h> for function strrchr(
> )""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 3300 "configure"
>#include "confdefs.h"
>#include <string.h>
> extern struct {int a; int b;} *strrchr();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:3310: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_STRRCHR_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRRCHR_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_STRRCHR_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRRCHR_DECL 1
>EOF
>
>
>
>fi
> ac_safe=`echo "string.h" | tr './\055' '___'`
>echo $ac_n "checking for string.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3344 "configure"
>#include "confdefs.h"
>#include <string.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:3349: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <string.h> for function strncpy(
> )""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 3365 "configure"
>#include "confdefs.h"
>#include <string.h>
> extern struct {int a; int b;} *strncpy();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:3375: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_STRNCPY_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRNCPY_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_STRNCPY_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRNCPY_DECL 1
>EOF
>
>
>
>fi
> ac_safe=`echo "string.h" | tr './\055' '___'`
>echo $ac_n "checking for string.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3409 "configure"
>#include "confdefs.h"
>#include <string.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:3414: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <string.h> for function strtok()
> ""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 3430 "configure"
>#include "confdefs.h"
>#include <string.h>
> extern struct {int a; int b;} *strtok();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:3440: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_STRTOK_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRTOK_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_STRTOK_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRTOK_DECL 1
>EOF
>
>
>
>fi
> for ac_func in strstr
>do
>echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3475 "configure"
>#include "confdefs.h"
>/* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char $ac_func(); below. */
>#include <assert.h>
>/* Override any gcc2 internal prototype to avoid an error. */
>char $ac_func();
>
>int main() { return 0; }
>int t() {
>
>/* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
>#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
>choke me
>#else
>$ac_func();
>#endif
>
>; return 0; }
>EOF
>if { (eval echo configure:3497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=yes"
>else
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=no"
>fi
>rm -f conftest*
>
>fi
>if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> :
>else
> echo "$ac_t""no" 1>&6
>LIBOBJS="$LIBOBJS ${ac_func}.o"
>fi
>
>done
> ac_safe=`echo "string.h" | tr './\055' '___'`
>echo $ac_n "checking for string.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3522 "configure"
>#include "confdefs.h"
>#include <string.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:3527: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <string.h> for function strstr()
> ""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 3543 "configure"
>#include "confdefs.h"
>#include <string.h>
> extern struct {int a; int b;} *strstr();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:3553: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_STRSTR_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRSTR_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_STRSTR_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRSTR_DECL 1
>EOF
>
>
>
>fi
> for ac_func in memmove
>do
>echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3588 "configure"
>#include "confdefs.h"
>/* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char $ac_func(); below. */
>#include <assert.h>
>/* Override any gcc2 internal prototype to avoid an error. */
>char $ac_func();
>
>int main() { return 0; }
>int t() {
>
>/* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
>#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
>choke me
>#else
>$ac_func();
>#endif
>
>; return 0; }
>EOF
>if { (eval echo configure:3610: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=yes"
>else
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=no"
>fi
>rm -f conftest*
>
>fi
>if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> :
>else
> echo "$ac_t""no" 1>&6
>LIBOBJS="$LIBOBJS ${ac_func}.o"
>fi
>
>done
> ac_safe=`echo "string.h" | tr './\055' '___'`
>echo $ac_n "checking for string.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3635 "configure"
>#include "confdefs.h"
>#include <string.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:3640: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <string.h> for function memmove(
> )""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 3656 "configure"
>#include "confdefs.h"
>#include <string.h>
> extern struct {int a; int b;} *memmove();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:3666: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_MEMMOVE_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_MEMMOVE_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_MEMMOVE_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_MEMMOVE_DECL 1
>EOF
>
>
>
>fi
>
> for arg in difftime.c strftime.c time.h.in; do
> case "$PORT_MANIFEST" in
> *$arg*)
> ;;
> *)
> PORT_MANIFEST="${PORT_MANIFEST-} $arg"
> ;;
> esac
> done
> echo "#include <time.h>" > conftestpath.c
> #
> # We add additional `/'s to the header file name to preclude compiler
> # warnings about the non-portability of `#include "/usr/include/..."'.
> #
> case `uname -s`${GCC-} in
> AIX)
> #
> # AIX's C compiler doesn't emit a line that gives the pathname of
> # the included file.
> #
> # AIX's C compiler puts dependency information in a `.u' file.
> #
> # AIX 4.1's cc(1) makes the following complaint:
> # ld: 0711-317 ERROR: Undefined symbol: .main
> #
> # AIX 4.1's ksh(1) has problems with `2>&5' so we redirect to
> # /dev/null.
> #
> $CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>/dev/null
> path=`sed -n '/[^\/]*\(\/[^ ]*time\.h\).*/s//\1/p' \
> conftestpath.u | head -1`
> rm conftestpath.u
> ;;
> HP-UX)
> #
> # HP-UX's C compiler doesn't have a dependency-generation option,
> # so we use another method.
> #
> path=`$CC -E $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*time\.h\).*/s//\1/p' |
> head -1`
> ;;
> *)
> path=`$CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*time\.h\).*/s//\1/p' |
> head -1`
> ;;
> esac
> case "$path" in
> '')
> path=/dev/null
> ;;
> *)
> path=//$path
> ;;
> esac
> cat >> confdefs.h <<EOF
>#define UD_SYSTEM_TIME_H "$path"
>EOF
>
>
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
> ac_safe=`echo "time.h" | tr './\055' '___'`
>echo $ac_n "checking for time.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3771 "configure"
>#include "confdefs.h"
>#include <time.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:3776: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <time.h> for typedef time_t""...
> $ac_c" 1>&6
> echo '#include <time.h>' >conftest.c
> if ($CPP conftest.c | grep time_t >/dev/null) 2>&5; then
> echo "$ac_t""declared" 1>&6
> rm conftest.c
> else
> cat > conftest.$ac_ext <<EOF
>#line 3797 "configure"
>#include "confdefs.h"
>#include <time.h>
> int time_t;
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:3807: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
>
> echo "$ac_t""undeclared" 1>&6
> cat >> confdefs.h <<\EOF
>#define UD_NO_TIME_H_TIME_T 1
>EOF
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
> fi
>
>else
> echo "$ac_t""no" 1>&6
>
> cat >> confdefs.h <<\EOF
>#define UD_NO_TIME_H_TIME_T 1
>EOF
>
>fi
> ac_safe=`echo "time.h" | tr './\055' '___'`
>echo $ac_n "checking for time.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3837 "configure"
>#include "confdefs.h"
>#include <time.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:3842: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <time.h> for typedef size_t""...
> $ac_c" 1>&6
> echo '#include <time.h>' >conftest.c
> if ($CPP conftest.c | grep size_t >/dev/null) 2>&5; then
> echo "$ac_t""declared" 1>&6
> rm conftest.c
> else
> cat > conftest.$ac_ext <<EOF
>#line 3863 "configure"
>#include "confdefs.h"
>#include <time.h>
> int size_t;
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:3873: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
>
> echo "$ac_t""undeclared" 1>&6
> cat >> confdefs.h <<\EOF
>#define UD_NO_TIME_H_SIZE_T 1
>EOF
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
> fi
>
>else
> echo "$ac_t""no" 1>&6
>
> cat >> confdefs.h <<\EOF
>#define UD_NO_TIME_H_SIZE_T 1
>EOF
>
>fi
> for ac_func in difftime
>do
>echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3904 "configure"
>#include "confdefs.h"
>/* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char $ac_func(); below. */
>#include <assert.h>
>/* Override any gcc2 internal prototype to avoid an error. */
>char $ac_func();
>
>int main() { return 0; }
>int t() {
>
>/* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
>#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
>choke me
>#else
>$ac_func();
>#endif
>
>; return 0; }
>EOF
>if { (eval echo configure:3926: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=yes"
>else
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=no"
>fi
>rm -f conftest*
>
>fi
>if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> :
>else
> echo "$ac_t""no" 1>&6
>LIBOBJS="$LIBOBJS ${ac_func}.o"
>fi
>
>done
> ac_safe=`echo "time.h" | tr './\055' '___'`
>echo $ac_n "checking for time.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 3951 "configure"
>#include "confdefs.h"
>#include <time.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:3956: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <time.h> for function difftime()
> ""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 3972 "configure"
>#include "confdefs.h"
>#include <time.h>
> extern struct {int a; int b;} *difftime();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
EOF
>if { (eval echo configure:3982: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_DIFFTIME_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_DIFFTIME_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_DIFFTIME_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_DIFFTIME_DECL 1
>EOF
>
>
>
>fi
> for ac_func in strftime
>do
>echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 4017 "configure"
>#include "confdefs.h"
>/* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char $ac_func(); below. */
>#include <assert.h>
>/* Override any gcc2 internal prototype to avoid an error. */
>char $ac_func();
>
>int main() { return 0; }
>int t() {
>
>/* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
>#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
>choke me
>#else
>$ac_func();
>#endif
>
>; return 0; }
>EOF
>if { (eval echo configure:4039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=yes"
>else
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=no"
>fi
>rm -f conftest*
>
>fi
>if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> :
>else
> echo "$ac_t""no" 1>&6
>LIBOBJS="$LIBOBJS ${ac_func}.o"
>fi
>
>done
> ac_safe=`echo "time.h" | tr './\055' '___'`
>echo $ac_n "checking for time.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 4064 "configure"
>#include "confdefs.h"
>#include <time.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:4069: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <time.h> for function strftime()
> ""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 4085 "configure"
>#include "confdefs.h"
>#include <time.h>
> extern struct {int a; int b;} *strftime();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:4095: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_STRFTIME_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRFTIME_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_STRFTIME_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_STRFTIME_DECL 1
>EOF
>
>
>
>fi
>
> for arg in limits.h.in; do
> case "$PORT_MANIFEST" in
> *$arg*)
> ;;
> *)
> PORT_MANIFEST="${PORT_MANIFEST-} $arg"
> ;;
> esac
> done
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
> echo "#include <limits.h>" > conftestpath.c
> #
> # We add additional `/'s to the header file name to preclude compiler
> # warnings about the non-portability of `#include "/usr/include/..."'.
> #
> case `uname -s`${GCC-} in
> AIX)
> #
> # AIX's C compiler doesn't emit a line that gives the pathname of
> # the included file.
> #
> # AIX's C compiler puts dependency information in a `.u' file.
> #
> # AIX 4.1's cc(1) makes the following complaint:
> # ld: 0711-317 ERROR: Undefined symbol: .main
> #
> # AIX 4.1's ksh(1) has problems with `2>&5' so we redirect to
> # /dev/null.
> #
> $CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>/dev/null
> path=`sed -n '/[^\/]*\(\/[^ ]*limits\.h\).*/s//\1/p' \
> conftestpath.u | head -1`
> rm conftestpath.u
> ;;
> HP-UX)
> #
> # HP-UX's C compiler doesn't have a dependency-generation option,
> # so we use another method.
> #
> path=`$CC -E $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*limits\.h\).*/s//\1/p' |
> head -1`
> ;;
> *)
> path=`$CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*limits\.h\).*/s//\1/p' |
> head -1`
> ;;
> esac
> case "$path" in
> '')
> path=/dev/null
> ;;
> *)
> path=//$path
> ;;
> esac
> cat >> confdefs.h <<EOF
>#define UD_SYSTEM_LIMITS_H "$path"
>EOF
>
>
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
>
>
> for arg in search.h.in tsearch.c tfind.c tdelete.c twalk.c \
> search-node.h; do
> case "$PORT_MANIFEST" in
> *$arg*)
> ;;
> *)
> PORT_MANIFEST="${PORT_MANIFEST-} $arg"
> ;;
> esac
> done
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
> echo "#include <search.h>" > conftestpath.c
> #
> # We add additional `/'s to the header file name to preclude compiler
> # warnings about the non-portability of `#include "/usr/include/..."'.
> #
> case `uname -s`${GCC-} in
> AIX)
> #
> # AIX's C compiler doesn't emit a line that gives the pathname of
> # the included file.
> #
> # AIX's C compiler puts dependency information in a `.u' file.
> #
> # AIX 4.1's cc(1) makes the following complaint:
> # ld: 0711-317 ERROR: Undefined symbol: .main
> #
> # AIX 4.1's ksh(1) has problems with `2>&5' so we redirect to
> # /dev/null.
> #
> $CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>/dev/null
> path=`sed -n '/[^\/]*\(\/[^ ]*search\.h\).*/s//\1/p' \
> conftestpath.u | head -1`
> rm conftestpath.u
> ;;
> HP-UX)
> #
> # HP-UX's C compiler doesn't have a dependency-generation option,
> # so we use another method.
> #
> path=`$CC -E $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*search\.h\).*/s//\1/p' |
> head -1`
> ;;
> *)
> path=`$CC_MAKEDEPEND $CPPFLAGS conftestpath.c 2>&5 |
> sed -n '/[^\/]*\(\/[^ ]*search\.h\).*/s//\1/p' |
> head -1`
> ;;
> esac
> case "$path" in
> '')
> path=/dev/null
> ;;
> *)
> path=//$path
> ;;
> esac
> cat >> confdefs.h <<EOF
>#define UD_SYSTEM_SEARCH_H "$path"
>EOF
>
>
> for arg in misc; do
> case "$PORT_SUBDIRS" in
> *$arg*)
> ;;
> *)
> PORT_SUBDIRS="${PORT_SUBDIRS-} $arg"
> ;;
> esac
> done
> ac_safe=`echo "search.h" | tr './\055' '___'`
>echo $ac_n "checking for search.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 4291 "configure"
>#include "confdefs.h"
>#include <search.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:4296: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <search.h> for typedef ENTRY""..
> . $ac_c" 1>&6
> echo '#include <search.h>' >conftest.c
> if ($CPP conftest.c | grep ENTRY >/dev/null) 2>&5; then
> echo "$ac_t""declared" 1>&6
> rm conftest.c
> else
> cat > conftest.$ac_ext <<EOF
>#line 4317 "configure"
>#include "confdefs.h"
>#include <search.h>
> int ENTRY;
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:4327: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
>
> echo "$ac_t""undeclared" 1>&6
> cat >> confdefs.h <<\EOF
>#define UD_NO_SEARCH_H_ENTRY 1
>EOF
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
> fi
>
>else
> echo "$ac_t""no" 1>&6
>
> cat >> confdefs.h <<\EOF
>#define UD_NO_SEARCH_H_ENTRY 1
>EOF
>
>fi
> ac_safe=`echo "search.h" | tr './\055' '___'`
>echo $ac_n "checking for search.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 4357 "configure"
>#include "confdefs.h"
>#include <search.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:4362: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <search.h> for typedef ACTION"".
> .. $ac_c" 1>&6
> echo '#include <search.h>' >conftest.c
> if ($CPP conftest.c | grep ACTION >/dev/null) 2>&5; then
> echo "$ac_t""declared" 1>&6
> rm conftest.c
> else
> cat > conftest.$ac_ext <<EOF
>#line 4383 "configure"
>#include "confdefs.h"
>#include <search.h>
> int ACTION;
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:4393: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
>
> echo "$ac_t""undeclared" 1>&6
> cat >> confdefs.h <<\EOF
>#define UD_NO_SEARCH_H_ACTION 1
>EOF
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
> fi
>
>else
> echo "$ac_t""no" 1>&6
>
> cat >> confdefs.h <<\EOF
>#define UD_NO_SEARCH_H_ACTION 1
>EOF
>
>fi
> ac_safe=`echo "search.h" | tr './\055' '___'`
>echo $ac_n "checking for search.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 4423 "configure"
>#include "confdefs.h"
>#include <search.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:4428: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <search.h> for typedef VISIT""..
> . $ac_c" 1>&6
> echo '#include <search.h>' >conftest.c
> if ($CPP conftest.c | grep VISIT >/dev/null) 2>&5; then
> echo "$ac_t""declared" 1>&6
> rm conftest.c
> else
> cat > conftest.$ac_ext <<EOF
>#line 4449 "configure"
>#include "confdefs.h"
>#include <search.h>
> int VISIT;
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:4459: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
>
> echo "$ac_t""undeclared" 1>&6
> cat >> confdefs.h <<\EOF
>#define UD_NO_SEARCH_H_VISIT 1
>EOF
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
> fi
>
>else
> echo "$ac_t""no" 1>&6
>
> cat >> confdefs.h <<\EOF
>#define UD_NO_SEARCH_H_VISIT 1
>EOF
>
>fi
> for ac_func in tsearch
>do
>echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 4490 "configure"
>#include "confdefs.h"
>/* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char $ac_func(); below. */
>#include <assert.h>
>/* Override any gcc2 internal prototype to avoid an error. */
>char $ac_func();
>
>int main() { return 0; }
>int t() {
>
>/* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
>#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
>choke me
>#else
>$ac_func();
>#endif
>
>; return 0; }
>EOF
>if { (eval echo configure:4512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=yes"
>else
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=no"
>fi
>rm -f conftest*
>
>fi
>if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> :
>else
> echo "$ac_t""no" 1>&6
>LIBOBJS="$LIBOBJS ${ac_func}.o"
>fi
>
>done
> ac_safe=`echo "search.h" | tr './\055' '___'`
>echo $ac_n "checking for search.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 4537 "configure"
>#include "confdefs.h"
>#include <search.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:4542: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <search.h> for function tsearch(
> )""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 4558 "configure"
>#include "confdefs.h"
>#include <search.h>
> extern struct {int a; int b;} *tsearch();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:4568: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_TSEARCH_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_TSEARCH_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_TSEARCH_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_TSEARCH_DECL 1
>EOF
>
>
>
>fi
> for ac_func in tfind
>do
>echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 4603 "configure"
>#include "confdefs.h"
>/* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char $ac_func(); below. */
>#include <assert.h>
>/* Override any gcc2 internal prototype to avoid an error. */
>char $ac_func();
>
>int main() { return 0; }
>int t() {
>
>/* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
>#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
>choke me
>#else
>$ac_func();
>#endif
>
>; return 0; }
>EOF
>if { (eval echo configure:4625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=yes"
>else
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=no"
>fi
>rm -f conftest*
>
>fi
>if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> :
>else
> echo "$ac_t""no" 1>&6
>LIBOBJS="$LIBOBJS ${ac_func}.o"
>fi
>
>done
> ac_safe=`echo "search.h" | tr './\055' '___'`
>echo $ac_n "checking for search.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 4650 "configure"
>#include "confdefs.h"
>#include <search.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:4655: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <search.h> for function tfind()"
> "... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 4671 "configure"
>#include "confdefs.h"
>#include <search.h>
> extern struct {int a; int b;} *tfind();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:4681: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_TFIND_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_TFIND_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_TFIND_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_TFIND_DECL 1
>EOF
>
>
>
>fi
> for ac_func in tdelete
>do
>echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 4716 "configure"
>#include "confdefs.h"
>/* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char $ac_func(); below. */
>#include <assert.h>
>/* Override any gcc2 internal prototype to avoid an error. */
>char $ac_func();
>
>int main() { return 0; }
>int t() {
>
>/* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
>#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
>choke me
>#else
>$ac_func();
>#endif
>
>; return 0; }
>EOF
>if { (eval echo configure:4738: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=yes"
>else
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=no"
>fi
>rm -f conftest*
>
>fi
>if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> :
>else
> echo "$ac_t""no" 1>&6
>LIBOBJS="$LIBOBJS ${ac_func}.o"
>fi
>
>done
> ac_safe=`echo "search.h" | tr './\055' '___'`
>echo $ac_n "checking for search.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 4763 "configure"
>#include "confdefs.h"
>#include <search.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:4768: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <search.h> for function tdelete(
> )""... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 4784 "configure"
>#include "confdefs.h"
>#include <search.h>
> extern struct {int a; int b;} *tdelete();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:4794: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_TDELETE_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_TDELETE_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_TDELETE_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_TDELETE_DECL 1
>EOF
>
>
>
>fi
> for ac_func in twalk
>do
>echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 4829 "configure"
>#include "confdefs.h"
>/* System header to define __stub macros and hopefully few prototypes,
> which can conflict with char $ac_func(); below. */
>#include <assert.h>
>/* Override any gcc2 internal prototype to avoid an error. */
>char $ac_func();
>
>int main() { return 0; }
>int t() {
>
>/* The GNU C library defines this for functions which it implements
> to always fail with ENOSYS. Some functions are actually named
> something starting with __ and the normal name is an alias. */
>#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
>choke me
>#else
>$ac_func();
>#endif
>
>; return 0; }
>EOF
>if { (eval echo configure:4851: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; t
> hen
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=yes"
>else
> rm -rf conftest*
> eval "ac_cv_func_$ac_func=no"
>fi
>rm -f conftest*
>
>fi
>if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> :
>else
> echo "$ac_t""no" 1>&6
>LIBOBJS="$LIBOBJS ${ac_func}.o"
>fi
>
>done
> ac_safe=`echo "search.h" | tr './\055' '___'`
>echo $ac_n "checking for search.h""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> cat > conftest.$ac_ext <<EOF
>#line 4876 "configure"
>#include "confdefs.h"
>#include <search.h>
>EOF
>ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
>{ (eval echo configure:4881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
>ac_err=`grep -v '^ *+' conftest.out`
>if test -z "$ac_err"; then
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=yes"
>else
> echo "$ac_err" >&5
> rm -rf conftest*
> eval "ac_cv_header_$ac_safe=no"
>fi
>rm -f conftest*
>fi
>if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
> echo "$ac_t""yes" 1>&6
> echo $ac_n "checking C header file <search.h> for function twalk()"
> "... $ac_c" 1>&6
> cat > conftest.$ac_ext <<EOF
>#line 4897 "configure"
>#include "confdefs.h"
>#include <search.h>
> extern struct {int a; int b;} *twalk();
>
>int main() { return 0; }
>int t() {
>
>; return 0; }
>EOF
>if { (eval echo configure:4907: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5
> ; }; then
> rm -rf conftest*
> echo "$ac_t""undeclared" 1>&6
> UD_NO_TWALK_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_TWALK_DECL 1
>EOF
>
>
>
>else
> rm -rf conftest*
> echo "$ac_t""declared" 1>&6
>
>fi
>rm -f conftest*
>
>else
> echo "$ac_t""no" 1>&6
>
> UD_NO_TWALK_DECL="1"
>cat >> confdefs.h <<\EOF
>#define UD_NO_TWALK_DECL 1
>EOF
>
>
>
>fi
>
>
> case "${PERL-unset}" in
> unset)
> for ac_prog in perl
>do
># Extract the first word of "$ac_prog", so it can be a program name with args.
>set dummy $ac_prog; ac_word=$2
>echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
>if eval "test \"`echo '$''{'ac_cv_prog_PERL'+set}'`\" = set"; then
> echo $ac_n "(cached) $ac_c" 1>&6
>else
> if test -n "$PERL"; then
> ac_cv_prog_PERL="$PERL" # Let the user override the test.
>else
> IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
> for ac_dir in $PATH; do
> test -z "$ac_dir" && ac_dir=.
> if test -f $ac_dir/$ac_word; then
> ac_cv_prog_PERL="$ac_prog"
> break
> fi
> done
> IFS="$ac_save_ifs"
>fi
>fi
>PERL="$ac_cv_prog_PERL"
>if test -n "$PERL"; then
> echo "$ac_t""$PERL" 1>&6
>else
> echo "$ac_t""no" 1>&6
>fi
>
>test -n "$PERL" && break
>done
> case "$PERL" in
> '') echo "PERL:perl utility:/usr/local/bin/perl" >> confdefs.mi
> ssing
>
> ;;
> *)
> ;;
> esac
> ;;
> *)
> echo $ac_n "checking for perl utility""... $ac_c" 1>&6
>
> echo "$ac_t""$PERL" 1>&6
> ;;
> esac
>
> echo $ac_n "checking for type of perl executable to create""... $ac_c" 1>&
> 6
> case ${LINKTYPE-unset} in
> unset)
> case `uname -s` in
> ULTRIX)
> LINKTYPE=static
> ;;
> *)
> LINKTYPE=dynamic
> ;;
> esac
> ;;
> esac
> echo "$ac_t""$LINKTYPE" 1>&6
>
>
>
> echo $ac_n "checking for position-independent compilation flags""... $ac_c
> " 1>&6
> picflag=
> case `uname -s` in
> HP-UX)
> picflag=+z
> ;;
> esac
> case "$picflag" in
> '')
> echo "$ac_t""''" 1>&6
> ;;
> *)
> echo "$ac_t""$picflag" 1>&6
> for arg in $picflag; do
> case "$CFLAGS" in
> *$arg*)
> ;;
> *)
> CFLAGS="${CFLAGS-} $arg"
> ;;
> esac
> done
> for arg in $picflag; do
> case "$FFLAGS" in
> *$arg*)
> ;;
> *)
> FFLAGS="${FFLAGS-} $arg"
> ;;
> esac
> done
> for arg in $picflag; do
> case "$CXXFLAGS" in
> *$arg*)
> ;;
> *)
> CXXFLAGS="${CXXFLAGS-} $arg"
> ;;
> esac
> done
> ;;
> esac
>
> case "${PERL}" in
> '')
> PERL_ALL=
> PERL_TEST=
> PERL_INSTALL=
> PERL_CLEAN=
> PERL_DISTCLEAN=
> PERL_MANUAL=
> ;;
> *)
> case "$LINKTYPE" in
> static)
> PERL_ALL=perl/perl
> PERL_INSTALL=perl/inst_perl
> ;;
> *)
> PERL_ALL=perl/dynamic
> PERL_INSTALL=perl/install
> ;;
> esac
> PERL_TEST=perl/test
> PERL_CLEAN=perl/clean
> PERL_DISTCLEAN=perl/distclean
> PERL_MANUAL=udunitsperl.1
> ;;
> esac
>
>
>
>FTPDIR=${FTPDIR-/home/ftp}/pub/udunits
>
>
> if test -s confdefs.missing; then
> echo
> echo "$0: ERROR: The following variables need values:"
> echo
> awk -F: 'BEGIN {printf "%-13s%-27s%s\n", "VARIABLE", "DESCRIPTION", "EXAMPLE
> ";
> printf "%-13s%-27s%s\n", "--------", "-------", "-------"}
> {printf "%-13s%-27s%s\n", $1, $2, $3}' confdefs.missing
> if test -t 0 -a -t 1; then
> cat << \UD_CAT_EOF
>
>For each variable above, this script will now request that you input
>a value appropriate for your system (note that this value will not
>be interpolated by a shell -- so don't use shell substitutions).
>Alternatively, you can interrupt this script, set the above variables
>in the environment or in the file CUSTOMIZE, and then re-execute this
>script. (Variables referring to executable programs needn't be set if
>the relevant directory is added to PATH. See file INSTALL for details.)
>
>UD_CAT_EOF
> saveifs="$IFS"; IFS=:
> while read variable description example; do
> echo "Enter a value for the $description (e.g. \"$example\"):" >/dev/tty
> read value </dev/tty
> echo "$variable='$value'"
> echo >/dev/tty
> done <confdefs.missing >conf.assigns
> IFS="$saveifs"
> . ./conf.assigns
> rm -f conf.assigns
> else
> cat << UD_CAT_EOF
>
>The above variables may be set in the environment or in the file
>CUSTOMIZE. Variables referring to executable programs needn't be set
>if the relevant directory is added to PATH. In any case, ./configure
>should probably be rerun. See file INSTALL for details.
>
>UD_CAT_EOF
> rm confdefs.missing
> exit 1
> fi
>fi
>rm -f confdefs.missing
> trap '' 1 2 15
>cat > confcache <<\EOF
># This file is a shell script that caches the results of configure
># tests run on this system so they can be shared between configure
># scripts and configure runs. It is not useful on other systems.
># If it contains results you don't want to keep, you may remove or edit it.
>#
># By default, configure uses ./config.cache as the cache file,
># creating it if it does not exist already. You can give configure
># the --cache-file=FILE option to use a different cache file; that is
># what configure does when it calls configure scripts in
># subdirectories, so they share the cache.
># Giving --cache-file=/dev/null disables caching, for debugging configure.
># config.status only pays attention to the cache file if you give it the
># --recheck option to rerun configure.
>#
>EOF
># Ultrix sh set writes to stderr and can't be redirected directly,
># and sets the high bit in the cache file unless we assign to the vars.
>(set) 2>&1 |
> sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
> >> confcache
>if cmp -s $cache_file confcache; then
> :
>else
> if test -w $cache_file; then
> echo "updating cache $cache_file"
> cat confcache > $cache_file
> else
> echo "not updating unwritable cache $cache_file"
> fi
>fi
>rm -f confcache
>
>trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1
> 2 15
>
>test "x$prefix" = xNONE && prefix=$ac_default_prefix
># Let make expand exec_prefix.
>test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
>
># Any assignment to VPATH causes Sun make to only execute
># the first set of double-colon rules, so remove it if not needed.
># If there is a colon in the path, we need to keep it.
>if test "x$srcdir" = x.; then
> ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
>fi
>
>trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
>
>DEFS=-DHAVE_CONFIG_H
>
># Without the "./", some shells look in PATH for config.status.
>: ${CONFIG_STATUS=./config.status}
>
>echo creating $CONFIG_STATUS
>rm -f $CONFIG_STATUS
>cat > $CONFIG_STATUS <<EOF
>#! /bin/sh
># Generated automatically by configure.
># Run this file to recreate the current configuration.
># This directory was configured as follows,
># on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
>#
># $0 $ac_configure_args
>#
># Compiler output produced by configure, useful for debugging
># configure, is in ./config.log if it exists.
>
>ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
>for ac_option
>do
> case "\$ac_option" in
> -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
> echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create -
> -no-recursion"
> exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recur
> sion ;;
> -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
> echo "$CONFIG_STATUS generated by autoconf version 2.9"
> exit 0 ;;
> -help | --help | --hel | --he | --h)
> echo "\$ac_cs_usage"; exit 0 ;;
> *) echo "\$ac_cs_usage"; exit 1 ;;
> esac
>done
>
>ac_given_srcdir=$srcdir
>
>trap 'rm -fr `echo "Makefile
> lib/Makefile
> udunits/Makefile
> perl/Makefile.PL
> ${CONFIG_FILES-} port/misc/udposix.h port/misc/stdarg.h port/misc/stddef.h po
> rt/misc/stdlib.h port/misc/string.h port/misc/time.h port/misc/limits.h port/
> misc/search.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
>EOF
>cat >> $CONFIG_STATUS <<EOF
>
># Protect against being on the right side of a sed subst in config.status.
>sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
> s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
>$ac_vpsub
>$extrasub
>s%@CFLAGS@%$CFLAGS%g
>s%@CPPFLAGS@%$CPPFLAGS%g
>s%@CXXFLAGS@%$CXXFLAGS%g
>s%@DEFS@%$DEFS%g
>s%@LDFLAGS@%$LDFLAGS%g
>s%@LIBS@%$LIBS%g
>s%@exec_prefix@%$exec_prefix%g
>s%@prefix@%$prefix%g
>s%@program_transform_name@%$program_transform_name%g
>s%@bindir@%$bindir%g
>s%@sbindir@%$sbindir%g
>s%@libexecdir@%$libexecdir%g
>s%@datadir@%$datadir%g
>s%@sysconfdir@%$sysconfdir%g
>s%@sharedstatedir@%$sharedstatedir%g
>s%@localstatedir@%$localstatedir%g
>s%@libdir@%$libdir%g
>s%@includedir@%$includedir%g
>s%@oldincludedir@%$oldincludedir%g
>s%@infodir@%$infodir%g
>s%@mandir@%$mandir%g
>s%@CONFIG_FILES@%$CONFIG_FILES%g
>s%@PORT_SUBDIRS@%$PORT_SUBDIRS%g
>s%@PORT_MANIFEST@%$PORT_MANIFEST%g
s%@PORT_ALL@%$PORT_ALL%g
>s%@PORT_CLEAN@%$PORT_CLEAN%g
>s%@PORT_DISTCLEAN@%$PORT_DISTCLEAN%g
>s%@PORT_INSTALL@%$PORT_INSTALL%g
>s%@prog@%$prog%g
>s%@WHATIS@%$WHATIS%g
>s%@MAKEWHATIS_CMD@%$MAKEWHATIS_CMD%g
>s%@CC@%$CC%g
>s%@OPSYS@%$OPSYS%g
>s%@CC_MAKEDEPEND@%$CC_MAKEDEPEND%g
>s%@CPP@%$CPP%g
>s%@UD_NO_CONST@%$UD_NO_CONST%g
>s%@UD_NO_VOLATILE@%$UD_NO_VOLATILE%g
>s%@UD_NO_SIGNED@%$UD_NO_SIGNED%g
>s%@UD_NO_PROTOTYPES@%$UD_NO_PROTOTYPES%g
>s%@UD_NO_HASH@%$UD_NO_HASH%g
>s%@UD_NO_HASHHASH@%$UD_NO_HASHHASH%g
>s%@UD_NO_VOIDSTAR@%$UD_NO_VOIDSTAR%g
>s%@AR@%$AR%g
>s%@TARFLAGS@%$TARFLAGS%g
>s%@RANLIB@%$RANLIB%g
>s%@FTPBINDIR@%$FTPBINDIR%g
>s%@LIBOBJS@%$LIBOBJS%g
>s%@PORT_HEADERS@%$PORT_HEADERS%g
>s%@PORT_CPP_LDM@%$PORT_CPP_LDM%g
>s%@LD_UDPORT@%$LD_UDPORT%g
>s%@NEQN@%$NEQN%g
>s%@TBL@%$TBL%g
>s%@LD_UDUNITS@%$LD_UDUNITS%g
>s%@LD_YACC@%$LD_YACC%g
>s%@LD_MATH@%$LD_MATH%g
>s%@CFORTRAN_TYPE@%$CFORTRAN_TYPE%g
>s%@FFLAGS@%$FFLAGS%g
>s%@UD_NO_ATEXIT_DECL@%$UD_NO_ATEXIT_DECL%g
>s%@UD_NO_GETENV_DECL@%$UD_NO_GETENV_DECL%g
>s%@UD_NO_STRERROR_DECL@%$UD_NO_STRERROR_DECL%g
>s%@UD_NO_STRCHR_DECL@%$UD_NO_STRCHR_DECL%g
>s%@UD_NO_STRCPY_DECL@%$UD_NO_STRCPY_DECL%g
>s%@UD_NO_STRRCHR_DECL@%$UD_NO_STRRCHR_DECL%g
>s%@UD_NO_STRNCPY_DECL@%$UD_NO_STRNCPY_DECL%g
>s%@UD_NO_STRTOK_DECL@%$UD_NO_STRTOK_DECL%g
>s%@UD_NO_STRSTR_DECL@%$UD_NO_STRSTR_DECL%g
>s%@UD_NO_MEMMOVE_DECL@%$UD_NO_MEMMOVE_DECL%g
>s%@UD_NO_DIFFTIME_DECL@%$UD_NO_DIFFTIME_DECL%g
>s%@UD_NO_STRFTIME_DECL@%$UD_NO_STRFTIME_DECL%g
>s%@UD_NO_TSEARCH_DECL@%$UD_NO_TSEARCH_DECL%g
>s%@UD_NO_TFIND_DECL@%$UD_NO_TFIND_DECL%g
>s%@UD_NO_TDELETE_DECL@%$UD_NO_TDELETE_DECL%g
>s%@UD_NO_TWALK_DECL@%$UD_NO_TWALK_DECL%g
>s%@PERL@%$PERL%g
>s%@LINKTYPE@%$LINKTYPE%g
>s%@PERL_ALL@%$PERL_ALL%g
>s%@PERL_TEST@%$PERL_TEST%g
>s%@PERL_INSTALL@%$PERL_INSTALL%g
>s%@PERL_CLEAN@%$PERL_CLEAN%g
>s%@PERL_DISTCLEAN@%$PERL_DISTCLEAN%g
>s%@PERL_MANUAL@%$PERL_MANUAL%g
>s%@FTPDIR@%$FTPDIR%g
>
>CEOF
>EOF
>cat >> $CONFIG_STATUS <<EOF
>
>CONFIG_FILES=\${CONFIG_FILES-"Makefile
> lib/Makefile
> udunits/Makefile
> perl/Makefile.PL
> ${CONFIG_FILES-}"}
>EOF
>cat >> $CONFIG_STATUS <<\EOF
>for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
> # Support "outfile[:infile]", defaulting infile="outfile.in".
> case "$ac_file" in
> *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
> ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
> *) ac_file_in="${ac_file}.in" ;;
> esac
>
> # Adjust relative srcdir, etc. for subdirectories.
>
> # Remove last slash and all that follows it. Not all systems have dirname.
> ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
> if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
> # The file is in a subdirectory.
> test ! -d "$ac_dir" && mkdir "$ac_dir"
> ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
> # A "../" for each directory in $ac_dir_suffix.
> ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
> else
> ac_dir_suffix= ac_dots=
> fi
>
> case "$ac_given_srcdir" in
> .) srcdir=.
> if test -z "$ac_dots"; then top_srcdir=.
> else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
> /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;
> ;
> *) # Relative path.
> srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
> top_srcdir="$ac_dots$ac_given_srcdir" ;;
> esac
>
> echo creating "$ac_file"
> rm -f "$ac_file"
> configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%
> '` by configure."
> case "$ac_file" in
> *Makefile*) ac_comsub="1i\\
># $configure_input" ;;
> *) ac_comsub= ;;
> esac
> sed -e "$ac_comsub
>s%@configure_input@%$configure_input%g
>s%@srcdir@%$srcdir%g
>s%@top_srcdir@%$top_srcdir%g
>" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
>fi; done
>rm -f conftest.subs
>
># These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
># NAME is the cpp macro being defined and VALUE is the value it is being given
> .
>#
># ac_d sets the value in "#define NAME VALUE" lines.
>ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
>ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
>ac_dC='\3'
>ac_dD='%g'
># ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
>ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
>ac_uB='\([ ]\)%\1#\2define\3'
>ac_uC=' '
>ac_uD='\4%g'
># ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
>ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
>ac_eB='$%\1#\2define\3'
>ac_eC=' '
>ac_eD='%g'
>
>CONFIG_HEADERS=${CONFIG_HEADERS-"port/misc/udposix.h port/misc/stdarg.h port/m
> isc/stddef.h port/misc/stdlib.h port/misc/string.h port/misc/time.h port/misc
> /limits.h port/misc/search.h"}
>for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
> # Support "outfile[:infile]", defaulting infile="outfile.in".
> case "$ac_file" in
> *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
> ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
> *) ac_file_in="${ac_file}.in" ;;
> esac
>
> echo creating $ac_file
>
> rm -f conftest.frag conftest.in conftest.out
> cp $ac_given_srcdir/$ac_file_in conftest.in
>
>EOF
>
># Transform confdefs.h into a sed script conftest.vals that substitutes
># the proper values into config.h.in to produce config.h. And first:
># Protect against being on the right side of a sed subst in config.status.
># Protect against being in an unquoted here document in config.status.
>rm -f conftest.vals
>cat > conftest.hdr <<\EOF
>s/[\\&%]/\\&/g
>s%[\\$`]%\\&%g
>s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${a
> c_dD}%gp
>s%ac_d%ac_u%gp
>s%ac_u%ac_e%gp
>EOF
>sed -n -f conftest.hdr confdefs.h > conftest.vals
>rm -f conftest.hdr
>
># This sed command replaces #undef with comments. This is necessary, for
># example, in the case of _POSIX_SOURCE, which is predefined and required
># on some systems where configure will not decide to define it.
>cat >> conftest.vals <<\EOF
>s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
>EOF
>
># Break up conftest.vals because some shells have a limit on
># the size of here documents, and old seds have small limits too.
># Maximum number of lines to put in a single here document.
>ac_max_here_lines=12
>
>rm -f conftest.tail
>while :
>do
> ac_lines=`grep -c . conftest.vals`
> # grep -c gives empty output for an empty file on some AIX systems.
> if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
> # Write a limited-size here document to conftest.frag.
> echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
> sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
> echo 'CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>' >> $CONFIG_STATUS
> sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
> rm -f conftest.vals
> mv conftest.tail conftest.vals
>done
>rm -f conftest.vals
>
>cat >> $CONFIG_STATUS <<\EOF
> rm -f conftest.frag conftest.h
> case "$ac_file" in
> *.h|*.hh|*.H)
> echo "/* $ac_file. Generated automatically by configure. */" \
> > conftest.h
> ;;
> esac
> cat conftest.in >> conftest.h
> rm -f conftest.in
> if cmp -s $ac_file conftest.h 2>/dev/null; then
> echo "$ac_file is unchanged"
> rm -f conftest.h
> else
> rm -f $ac_file
> mv conftest.h $ac_file
> fi
>fi; done
>
>EOF
>cat >> $CONFIG_STATUS <<EOF
> CC="$CC"
>
>EOF
>cat >> $CONFIG_STATUS <<\EOF
> #
># Create a script to accomplish the post processing.
>#
>cat << UD_EOF_CONFTEST_C > conftest.c
>#include <stdio.h>
>main()
>{
> return readsub((char*)NULL) ? 0 : 1;
>}
>readsub(inpath)
> char *inpath;
>{
> char buf[2048], path[1024];
> FILE *fp = inpath == NULL
> ? stdin
> : fopen(inpath, "r");
> if (fp == NULL) {
> (void) perror(inpath);
> return 0;
> }
> buf[sizeof(buf)-1] = 0;
> while (fgets(buf, sizeof(buf), fp) != NULL) {
> if (sscanf(buf, "include%*[ \t]%s", path) == 1) {
> if (!readsub(path))
> return 0;
> } else {
> (void) fputs(buf, stdout);
> }
> }
> return 1;
>}
>UD_EOF_CONFTEST_C
>if eval $CC -o conftest ${CFLAGS-} ${CPPFLAGS-} ${LDFLAGS-} conftest.c; then
> conftest=`pwd`/conftest
> case "${CONFIG_FILES-}" in
> '')
> ;;
> *)
> for file in ${CONFIG_FILES-}; do
> echo 1>&2 "expanding \`include's in file \`$file'"
> sd=`pwd`/`echo $file | sed 's,[^/]*$,,'`
> base=`basename $file`
> (cd $sd && $conftest < $base > conftest.mk &&
> mv conftest.mk $base) || exit 1
> done
> ;;
> esac
>fi
>rm conftest conftest.c
>
>exit 0
>EOF
>chmod +x $CONFIG_STATUS
>rm -fr confdefs* $ac_clean_files
>test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
>
>
>--Boundary_(ID_ACfmMdgRAWMlX/rhrZJfEg)--
Tom Yoksas
Unidata WWW Service http://my.unidata.ucar.edu/content/support
