[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
RE: 20020702: HU - upper air data
- Subject: RE: 20020702: HU - upper air data
- Date: Tue, 16 Jul 2002 12:37:58 -0600 (MDT)
Hi Pavel,
Ok, that sheds some light on the situation...we do maintain NSF's machine,
so that would make sense. I am guessing it was Tom Yoksas who helped you.
Your NEXRAD is fine, but:
On Tue, 16 Jul 2002, Pavel Byles-Howard University Engineering wrote:
>
> > I will proceed by putting a request for FSL2 in my ldmd.conf:
> > request FLS2 "/p...(DDS|IDS)" atm.geo.nsf.gov
will not!
FSL2 is a different feed than DDS or IDS, so requesting FSL2 with a
DDS|IDS action will return nothing. I will place an allow UNIDATA on
atm.geo.nsf.gov
Then request UNIDATA ".*" from atm.
I will attempt to get on atm and make the change.
Your pqact.conf entry appears OK:
> then in my pqact.conf file I will append this to the entry:
> > DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9])
>
> > PIPE decoders/dcuair -b 24 -m 16
>
> > -d data/pub/decoded/gempak/logs/dcuair.log
>
> > -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
>
> > -s snstns.tbl
>
> > data/pub/decoded/gempak/upperair/YYYYMMDD_upa.gem
But I believe this will capture ALL the reports so keep an eye on your
queue..or restrict the action...
I will notify you as soon as I have the allow on atm for you..
If you also want the profiler data (FSL2) we go point to point with that
from FSL and i will give you the contact, but I think you really want
upperair obs..not profiler data, but just guessing.
Thank you,
-Jeff
____________________________ _____________________
Jeff Weber address@hidden
Unidata Support PH:303-497-8676
NWS-COMET Case Study Library FX:303-497-8690
University Corp for Atmospheric Research 3300 Mitchell Ln
http://www.unidata.ucar.edu/staff/jweber Boulder,Co 80307-3000
________________________________________ ______________________
On Tue, 16 Jul 2002, Byles, Pavel O wrote:
> While you were on vacation or something another tech support rep intercepted
> our messages and was helping me in the meanwhile. He suggested that I use
> that one instead of snow because he wasn't sure if snow was allowing me to
> get the data that I wanted.
>
> No I am not getting DDS|IDS data only nexrad data right now. That's all
> that's enabled in my ldmd.conf and pqact.conf files.
>
> The lines from my ldmd.conf file has this
> #request NNEXRAD "/p...(LWX|DOX|AKQ)" snow.nrcc.cornell.edu
> request NNEXRAD "/p...(LWX|DOX|AKQ)" atm.geo.nsf.gov
> Why wouldn't that work?
>
> Pavel.
> -----Original Message-----
> From: Jeff Weber
> To: Pavel Byles-Howard University Engineering
> Cc: ldm-support
> Sent: 7/16/02 11:07 AM
> Subject: Re: 20020702: HU -
> upper air data
>
> Pavel,
>
> That will not work...
>
> As I mentioned earlier, FSL2 is the profiler data, upper air data is in
> the DDS|IDS data stream...
>
> I suspect you are already getting DDS|IDS with your UNIDATA request, but
> you may have changed that.
>
> Why are you requesting from atm.geo.nsf.gov ? Is snow not still your
> feed?
>
> Please update.
>
> Thank you,
>
>
> -Jeff
> ____________________________ _____________________
> Jeff Weber address@hidden
> Unidata Support PH:303-497-8676
> NWS-COMET Case Study Library FX:303-497-8690
> University Corp for Atmospheric Research 3300 Mitchell Ln
> http://www.unidata.ucar.edu/staff/jweber Boulder,Co 80307-3000
> ________________________________________ ______________________
>
> On Tue, 16 Jul 2002, Pavel Byles-Howard University Engineering wrote:
>
> > I will proceed by putting a request for FSL2 in my ldmd.conf:
> > request FLS2 "/p...(DDS|IDS)" atm.geo.nsf.gov
> >
> > then in my pqact.conf file I will append this to the entry:
> > DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9])
>
> > PIPE decoders/dcuair -b 24 -m 16
>
> > -d data/pub/decoded/gempak/logs/dcuair.log
>
> > -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
>
> > -s snstns.tbl
>
> > data/pub/decoded/gempak/upperair/YYYYMMDD_upa.gem
> >
> >
> > Pavel Byles
> >
> > On Mon, 15 Jul 2002, Jeff Weber wrote:
> >
> > > Hi Pavel,
> > >
> > > The upper air reports are in the DDS|IDS...or DDPLUS...or UNIDATA
> > > feedtypes or feedgroups..DDPLUS includes DDS|IDS and UNIDATA
> includes
> > > others..
> > >
> > >
> > > Here is a sample entry from our pqact.conf..
> > >
> > > #
> > > # upper air reports
> > > #
> > > DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9])
> > > PIPE decoders/dcuair -b 24 -m 16
> > > -d data/pub/decoded/gempak/logs/dcuair.log
> > > -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> > > -s snstns.tbl
> > > data/pub/decoded/gempak/upperair/YYYYMMDD_upa.gem
> > >
> > >
> > > see:
> > >
> > > http://unidata.ucar.edu/packages/ldm/feedtypes/index.html
> > >
> > > Profiler data is on FSL2
> > >
> > >
> > > Let me know how you want to proceed.
> > >
> > > Thank you,
> > >
> > > -Jeff
> > > ____________________________ _____________________
> > > Jeff Weber address@hidden
> > > Unidata Support PH:303-497-8676
> > > NWS-COMET Case Study Library FX:303-497-8690
> > > University Corp for Atmospheric Research 3300 Mitchell Ln
> > > http://www.unidata.ucar.edu/staff/jweber Boulder,Co 80307-3000
> > > ________________________________________ ______________________
> > >
> > > On Thu, 11 Jul 2002, Unidata Support wrote:
> > >
> > > >
> > > > ------- Forwarded Message
> > > >
> > > > >To: Unidata Support <address@hidden>
> > > > >From: Pavel Byles-Howard University Engineering
> <address@hidden>
> > > > >Subject: Re: 20020701: 20020628: 20020627: 20020626: LDM setup at
> Howard (cont.)
> > > > >Organization: UCAR/Unidata
> > > > >Keywords: 200207021955.g62JtDu21542
> > > >
> > > > How do I recieve upper air data? ie. what's the package name for
> it?
> > > >
> > > > --
> > > > Pavel Byles
> > > > Sent using Pine ver. 4.4
> > > > on RedHat Linux 7.3
> > > > http://138.238.177.230
> > > >
> > > >
> > > > ------- End of Forwarded Message
> > > >
> > > >
> > >
> >
> > --
> > Pavel Byles
> > Sent using Pine ver. 4.4
> > on RedHat Linux 7.3
> > http://138.238.177.230
> >
> >
>
