[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 20020702: HU - upper air data

Hi Pavel, 

I have added UNIDATA to the existing NNEXRAD FNEXRAD allows...on
geo.atm.nsf.gov

So request UNIDATA ".*" from geo as well.

Thank you,

-Jeff
____________________________                  _____________________
Jeff Weber                                    address@hidden
Unidata Support                               PH:303-497-8676 
NWS-COMET Case Study Library                  FX:303-497-8690
University Corp for Atmospheric Research      3300 Mitchell Ln
http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
________________________________________      ______________________

On Tue, 16 Jul 2002, Pavel Byles-Howard University Engineering wrote:

> yes that's correct. I do want upper air...
> 
> Pavel
> 
> 
> On Tue, 16 Jul 2002, Jeff Weber wrote:
> 
> > Hi Pavel, 
> > 
> > Ok, that sheds some light on the situation...we do maintain NSF's machine,
> > so that would make sense. I am guessing it was Tom Yoksas who helped you.
> > 
> > Your NEXRAD is fine, but:
> > 
> >  On Tue, 16 Jul 2002, Pavel Byles-Howard University Engineering wrote:
> > > 
> > > > I will proceed by putting a request for FSL2 in my ldmd.conf:
> > > > request FLS2 "/p...(DDS|IDS)" atm.geo.nsf.gov
> > 
> > 
> > will not!
> > 
> > FSL2 is a different feed than DDS or IDS, so requesting FSL2 with a
> > DDS|IDS action will return nothing. I will place an allow UNIDATA on
> > atm.geo.nsf.gov
> > 
> > Then request UNIDATA ".*" from atm.
> > 
> > I will attempt to get on atm and make the change.
> > 
> > Your pqact.conf entry appears OK:
> > 
> > > then in my pqact.conf file I will append this to the entry:
> > > > DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9])
> > > 
> > > >          PIPE    decoders/dcuair -b 24 -m 16
> > > 
> > > >          -d data/pub/decoded/gempak/logs/dcuair.log
> > > 
> > > >          -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> > > 
> > > >          -s snstns.tbl
> > >
> > > >          data/pub/decoded/gempak/upperair/YYYYMMDD_upa.gem
> > 
> > 
> > But I believe this will capture ALL the reports so keep an eye on your
> > queue..or restrict the action...
> > 
> > 
> > I will notify you as soon as I have the allow on atm for you..
> > 
> > 
> > If you also want the profiler data (FSL2) we go point to point with that
> > from FSL and i will give you the contact, but I think you really want
> > upperair obs..not profiler data, but just guessing.
> > 
> > Thank you,
> > 
> > -Jeff
> > ____________________________                  _____________________
> > Jeff Weber                                    address@hidden
> > Unidata Support                               PH:303-497-8676 
> > NWS-COMET Case Study Library                  FX:303-497-8690
> > University Corp for Atmospheric Research      3300 Mitchell Ln
> > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> > ________________________________________      ______________________
> > 
> > On Tue, 16 Jul 2002, Byles, Pavel O wrote:
> > 
> > > While you were on vacation or something another tech support rep 
> > > intercepted
> > > our  messages and was helping me in the meanwhile. He suggested that I use
> > > that one instead of snow because he wasn't sure if snow was allowing me to
> > > get the data that I wanted.
> > > 
> > > No I am not getting DDS|IDS data only nexrad data right now. That's all
> > > that's enabled in my ldmd.conf and pqact.conf files.
> > > 
> > > The lines from my ldmd.conf file has this
> > > #request NNEXRAD "/p...(LWX|DOX|AKQ)" snow.nrcc.cornell.edu
> > > request NNEXRAD "/p...(LWX|DOX|AKQ)" atm.geo.nsf.gov
> > > Why wouldn't that work?
> > > 
> > > Pavel.
> > > -----Original Message-----
> > > From: Jeff Weber
> > > To: Pavel Byles-Howard University Engineering
> > > Cc: ldm-support
> > > Sent: 7/16/02 11:07 AM
> > > Subject: Re: 20020702: HU - 
> > > upper air data
> > > 
> > > Pavel, 
> > > 
> > > That will not work...
> > > 
> > > As I mentioned earlier, FSL2 is the profiler data, upper air data is in
> > > the DDS|IDS data stream...
> > > 
> > > I suspect you are already getting DDS|IDS with your UNIDATA request, but
> > > you may have changed that.
> > > 
> > > Why are you requesting from  atm.geo.nsf.gov ? Is snow not still your
> > > feed?
> > > 
> > > Please update.
> > > 
> > > Thank you,
> > > 
> > > 
> > > -Jeff
> > > ____________________________                  _____________________
> > > Jeff Weber                                    address@hidden
> > > Unidata Support                               PH:303-497-8676 
> > > NWS-COMET Case Study Library                  FX:303-497-8690
> > > University Corp for Atmospheric Research      3300 Mitchell Ln
> > > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> > > ________________________________________      ______________________
> > > 
> > > On Tue, 16 Jul 2002, Pavel Byles-Howard University Engineering wrote:
> > > 
> > > > I will proceed by putting a request for FSL2 in my ldmd.conf:
> > > > request FLS2 "/p...(DDS|IDS)" atm.geo.nsf.gov
> > > > 
> > > > then in my pqact.conf file I will append this to the entry:
> > > > DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9])
> > > 
> > > >          PIPE    decoders/dcuair -b 24 -m 16
> > > 
> > > >          -d data/pub/decoded/gempak/logs/dcuair.log
> > > 
> > > >          -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> > > 
> > > >          -s snstns.tbl
> > > 
> > > >          data/pub/decoded/gempak/upperair/YYYYMMDD_upa.gem
> > > > 
> > > > 
> > > > Pavel Byles
> > > > 
> > > > On Mon, 15 Jul 2002, Jeff Weber wrote:
> > > > 
> > > > > Hi Pavel, 
> > > > > 
> > > > > The upper air reports are in the DDS|IDS...or DDPLUS...or UNIDATA
> > > > > feedtypes or feedgroups..DDPLUS includes DDS|IDS and UNIDATA
> > > includes
> > > > > others..
> > > > > 
> > > > > 
> > > > > Here is a sample entry from our pqact.conf..
> > > > > 
> > > > > #
> > > > > # upper air reports
> > > > > #
> > > > > DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9])
> > > > >         PIPE    decoders/dcuair -b 24 -m 16
> > > > >         -d data/pub/decoded/gempak/logs/dcuair.log
> > > > >         -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> > > > >         -s snstns.tbl
> > > > >         data/pub/decoded/gempak/upperair/YYYYMMDD_upa.gem
> > > > > 
> > > > > 
> > > > > see:
> > > > > 
> > > > > http://unidata.ucar.edu/packages/ldm/feedtypes/index.html
> > > > > 
> > > > > Profiler data is on FSL2
> > > > > 
> > > > > 
> > > > > Let me know how you want to proceed.
> > > > > 
> > > > > Thank you,
> > > > > 
> > > > > -Jeff
> > > > > ____________________________                  _____________________
> > > > > Jeff Weber                                    address@hidden
> > > > > Unidata Support                               PH:303-497-8676 
> > > > > NWS-COMET Case Study Library                  FX:303-497-8690
> > > > > University Corp for Atmospheric Research      3300 Mitchell Ln
> > > > > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> > > > > ________________________________________      ______________________
> > > > > 
> > > > > On Thu, 11 Jul 2002, Unidata Support wrote:
> > > > > 
> > > > > > 
> > > > > > ------- Forwarded Message
> > > > > > 
> > > > > > >To: Unidata Support <address@hidden>
> > > > > > >From: Pavel Byles-Howard University Engineering
> > > <address@hidden>
> > > > > > >Subject: Re: 20020701: 20020628: 20020627: 20020626: LDM setup at
> > > Howard (cont.) 
> > > > > > >Organization: UCAR/Unidata
> > > > > > >Keywords: 200207021955.g62JtDu21542
> > > > > > 
> > > > > > How do I recieve upper air data? ie. what's the package name for
> > > it?
> > > > > > 
> > > > > > -- 
> > > > > > Pavel Byles
> > > > > > Sent using Pine ver. 4.4
> > > > > > on RedHat Linux 7.3
> > > > > > http://138.238.177.230
> > > > > > 
> > > > > > 
> > > > > > ------- End of Forwarded Message
> > > > > > 
> > > > > > 
> > > > > 
> > > > 
> > > > -- 
> > > > Pavel Byles
> > > > Sent using Pine ver. 4.4
> > > > on RedHat Linux 7.3
> > > > http://138.238.177.230
> > > > 
> > > > 
> > > 
> > 
> 
> -- 
> Pavel Byles
> Sent using Pine ver. 4.4
> on RedHat Linux 7.3
> http://138.238.177.230
> 
>