[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
Re: 20011205: ldmd.conf multiple request line syntax
- Subject: Re: 20011205: ldmd.conf multiple request line syntax
- Date: Wed, 5 Dec 2001 15:09:45 -0700 (MST)
Hi Patrick,
Nope, it is your OS that will be trying to make sense of the reg
expressions...some try to combine them, and some try without much luck.
>Would the whole thing go in between the quotes: request HDS
> "string|string|string|string" or would it be like:
Yes, just one set of quotes.
Never too many questions......
Hope all is well in Iowa.
Keep me posted as to your success with this change.
Thank you,
-Jeff
____________________________ _____________________
Jeff Weber address@hidden
Unidata Support PH:303-497-8676
NWS-COMET Case Study Library FX:303-497-8690
University Corp for Atmospheric Research 3300 Mitchell Ln
http://www.unidata.ucar.edu/staff/jweber Boulder,Co 80307-3000
________________________________________ ______________________
On Wed, 5 Dec 2001, Patrick O'Reilly wrote:
> Hi Jeff,
>
> I'm running Solaris 8....Would it also matter what OS stokes is running? I
> will try the multiple strings on one line, it should be less than 256
> characters. Would the whole thing go in between the quotes: request HDS
> "string|string|string|string" or would it be like: request HDS
> "string"|"string"|"string"|"string" ? And yes I got the pattern matches for
> the particular models from the pqact.conf examples.
>
> Do I ask too many questions? Making sure you're busy, thats all.
>
> Patrick
>
> ----- Original Message -----
> From: "Jeff Weber" <address@hidden>
> To: "Patrick O'Reilly" <address@hidden>
> Cc: "ldm-support" <address@hidden>
> Sent: Wednesday, December 05, 2001 2:52 PM
> Subject: Re: 20011205: ldmd.conf multiple request line syntax
>
>
> > Hi Patrick,
> >
> > What OS are you running?
> >
> > Some do not enjoy the multiple requests for the same feed from the same
> > machine. And if it does act on it, it is not done in a timely fashion, so
> > it would be wise to change to one line if possible
> >
> > It would be better if you could place them all in one line with | (or)
> > seperators..but you cannot exceed 256 characters.
> >
> > I bet you have already visited:
> > http://www.unidata.ucar.edu/packages/gempak/tutorial/pqact/decoders.tbl
> >
> > for pqact examples and help regarding pattern matching for ldmd.conf
> >
> > I began attempting to condense your reg expression, but I think the |
> > approach will be much simpler if not too long...
> >
> >
> > Hope this helps,
> >
> > If not let me know...
> >
> > Thanks,
> >
> > -Jeff
> > ____________________________ _____________________
> > Jeff Weber address@hidden
> > Unidata Support PH:303-497-8676
> > NWS-COMET Case Study Library FX:303-497-8690
> > University Corp for Atmospheric Research 3300 Mitchell Ln
> > http://www.unidata.ucar.edu/staff/jweber Boulder,Co 80307-3000
> > ________________________________________ ______________________
> >
> > On Wed, 5 Dec 2001, Unidata Support wrote:
> >
> > >
> > > ------- Forwarded Message
> > >
> > > >From: "Patrick O'Reilly" <address@hidden>
> > > >Subject: ldmd.conf request line syntax
> > > >Organization: UNI
> > > >Keywords: 200112051940.fB5JerN13846 LDM ldmd.conf syntax
> > >
> > > This is a multi-part message in MIME format.
> > >
> > > ------=_NextPart_000_0031_01C17D92.ADE46C10
> > > Content-Type: multipart/alternative;
> > > boundary="----=_NextPart_001_0032_01C17D92.ADE77950"
> > >
> > >
> > > ------=_NextPart_001_0032_01C17D92.ADE77950
> > > Content-Type: text/plain;
> > > charset="iso-8859-1"
> > > Content-Transfer-Encoding: quoted-printable
> > >
> > > Hello all,
> > >
> > > I have been unsuccessfully trying to edit the request lines in ldmd.conf
> =
> > > to request only certain model data. I used the text string expressions
> =
> > > from pqact.conf for each model. I am trying to request eta212, eta215,
> =
> > > ngm211, avn211, mrf201, and ruc211. I have attached (hopefully) my =
> > > ldmd.conf and ldmd.log from my try. The ldm started okay, and the =
> > > ldmd.log looks okay, but no data came in for a while. Does this =
> > > ldmd.conf look okay as far as syntax, or is this too many request lines?
> =
> > > Thanks in advance, once again!
> > >
> > > Patrick
> > >
> > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > > Patrick O'Reilly Support Scientist
> > > The STORM Project address@hidden
> > > 208 Latham Hall ph: 319-273-3789
> > > University of Northern Iowa
> > > Cedar Falls, IA 50614 =20
> > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ =20
> > >
> > >
> > > ------=_NextPart_001_0032_01C17D92.ADE77950
> > > Content-Type: text/html;
> > > charset="iso-8859-1"
> > > Content-Transfer-Encoding: quoted-printable
> > >
> > > <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> > > <HTML><HEAD>
> > > <META http-equiv=3DContent-Type content=3D"text/html; =
> > > charset=3Diso-8859-1">
> > > <META content=3D"MSHTML 5.50.4522.1800" name=3DGENERATOR>
> > > <STYLE></STYLE>
> > > </HEAD>
> > > <BODY bgColor=3D#ffffff>
> > > <DIV><FONT face=3D"MS Sans Serif" size=3D2>Hello all,</FONT></DIV>
> > > <DIV><FONT face=3D"MS Sans Serif" size=3D2></FONT> </DIV>
> > > <DIV><FONT face=3D"MS Sans Serif" size=3D2>I have been unsuccessfully =
> > > trying to edit=20
> > > the request lines in ldmd.conf to request only
> certain model=20
> > > data. I used the text string expressions from pqact.conf for
> =
> > > each=20
> > > model. I am trying to request eta212, eta215, ngm211, avn211, =
> > > mrf201, and=20
> > > ruc211. I have attached (hopefully) my ldmd.conf and ldmd.log from
> =
> > > my=20
> > > try. The ldm started okay, and the ldmd.log looks okay, but no =
> > > data came=20
> > > in for a while. Does this ldmd.conf look okay as far as syntax, or
> =
> > > is this=20
> > > too many request lines? Thanks in advance, once =
> > > again!</FONT></DIV>
> > > <DIV><FONT face=3D"MS Sans Serif" size=3D2></FONT> </DIV>
> > > <DIV><FONT face=3D"MS Sans Serif" size=3D2>Patrick</FONT></DIV>
> > > <DIV> </DIV>
> > > <DIV><FONT face=3D"MS Sans Serif"=20
> > > size=3D2>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~<BR>Patrick=20
> > >
> O'Reilly  =
> > >
> ; =
> > > =20
> > > Support Scientist<BR>The STORM=20
> > >
> Project =
> > > <A=20
> > >
> href=3D"mailto:address@hidden";>address@hidden</A><BR>20=
> > > 8 Latham=20
> > >
> Hall &nb=
> > >
> sp; &nbs=
> > > p; =20
> > > ph: 319-273-3789<BR>University of Northern Iowa<BR>Cedar Falls, IA=20
> > >
> 50614 &n=
> > > bsp;=20
> > > <BR>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ =20
> > > <BR></FONT></DIV></BODY></HTML>
> > >
> > > ------=_NextPart_001_0032_01C17D92.ADE77950--
> > >
> > > ------=_NextPart_000_0031_01C17D92.ADE46C10
> > > Content-Type: application/octet-stream;
> > > name="ldmd.log.1"
> > > Content-Transfer-Encoding: quoted-printable
> > > Content-Disposition: attachment;
> > > filename="ldmd.log.1"
> > >
> > > Dec 05 19:23:52 blizzard rpc.ldmd[3940]: Starting Up (built: Aug 25 2000
> =
> > > 09:28:27)=0A=
> > > Dec 05 19:23:52 blizzard pqact[3942]: Starting Up=0A=
> > > Dec 05 19:23:52 blizzard stokes[3944]: run_requester: Starting Up: =
> > > stokes.metr.ou.edu=0A=
> > > Dec 05 19:23:52 blizzard stokes[3944]: run_requester: 20011205182352.685
> =
> > > TS_ENDT {{HDS, "^[YZ].[UR].*/mETA"},{HDS, "^Y.A... KWBH"},{H=0A=
> > > Dec 05 19:23:52 blizzard pqbinstats[3941]: Starting Up (3940)=0A=
> > > Dec 05 19:23:53 blizzard stokes[3944]: FEEDME(stokes.metr.ou.edu):
> OK=0A=
> > > Dec 05 19:23:54 blizzard localhost[3983]: Connection from localhost=0A=
> > > Dec 05 19:23:54 blizzard localhost[3983]: Connection reset by peer=0A=
> > > Dec 05 19:23:54 blizzard localhost[3983]: Exiting=0A=
> > > =0A=
> > >
> > > ------=_NextPart_000_0031_01C17D92.ADE46C10
> > > Content-Type: application/octet-stream;
> > > name="ldmd.conf.copy"
> > > Content-Transfer-Encoding: quoted-printable
> > > Content-Disposition: attachment;
> > > filename="ldmd.conf.copy"
> > >
> > > #####=0A=
> > > # $Id: ldmd.conf,v 1.13 2000/07/05 22:25:05 russ Exp $=0A=
> > > # Sample ldmd.conf for ldm5=0A=
> > > ####=0A=
> > > #=0A=
> > > # This is the main configuration file for the LDM server. All lines that
> =
> > > start=0A=
> > > # with a "#" sign are comments.=0A=
> > > #=0A=
> > > # To debug an LDM that hangs on start up, run the following from LDM =
> > > home:=0A=
> > > # % bin/rpc.ldmd -vl - -q data/ldm.pq etc/ldmd.conf=0A=
> > > #=0A=
> > > # If the LDM still hangs, comment out all lines in this file except
> noted=0A=
> > > # allow line entry below, try again.=0A=
> > > #=0A=
> > >
> #########################################################################=
> > > ######=0A=
> > > # Exec Entries=0A=
> > >
> #########################################################################=
> > > ######=0A=
> > > #=0A=
> > > # Programs that can share a queue with rpc.ldmd server, these
> programs=0A=
> > > # are started by the "exec" command and are in the same process
> group.=0A=
> > > #=0A=
> > > exec "pqbinstats"=0A=
> > > exec "pqact"=0A=
> > > exec "xcd_run MONITOR"=0A=
> > > #exec "pqsurf"=0A=
> > > #=0A=
> > >
> #########################################################################=
> > > ######=0A=
> > > # Request Entries=0A=
> > >
> #########################################################################=
> > > ######=0A=
> > > #=0A=
> > > # LDM5 servers request data from Data Sources=0A=
> > > #=0A=
> > > # request <feedset> <pattern> <hostname pattern>=0A=
> > > #=0A=
> > > #request WMO ".*" uni0.unidata.ucar.edu=0A=
> > > request HDS "^[YZ].[UR].*/mETA" stokes.metr.ou.edu=0A=
> > > request HDS "^Y.A... KWBH" stokes.metr.ou.edu=0A=
> > > request HDS "^[YZ].Q.*/mNGM" stokes.metr.ou.edu=0A=
> > > request HDS "^Y.Q... KWBC.*(/mAVN|/mSSIAVN)" stokes.metr.ou.edu=0A=
> > > request HDS "^[YZ].Q.*/mRUC" stokes.metr.ou.edu=0A=
> > > request NNEXRAD "/p...(ARX|DMX|DVN)" stokes.metr.ou.edu=0A=
> > > request NMC3 ".*" stokes.metr.ou.edu=0A=
> > > #=0A=
> > > #=0A=
> > >
> #########################################################################=
> > > ######=0A=
> > > # Allow Entries=0A=
> > >
> #########################################################################=
> > > ######=0A=
> > > #=0A=
> > > # Giving permission for a Data Sink to perform a request to your LDM=0A=
> > > #=0A=
> > > # allow <feedset> <hostname pattern>=0A=
> > > #=0A=
> > > # Giving permission to your own machine and Unidata=0A=
> > > #=0A=
> > > # Under no circumstances comment out the next allow entry to
> localhost=0A=
> > > # The LDM will NOT start if the lines are commented out.=0A=
> > > allow ANY=0A=
> > > =
> > >
> ^((localhost|loopback)|(127\.0\.0\.1\.?$)|([a-z].*\.unidata\.ucar\.edu\.?=
> > > $))=0A=
> > > #=0A=
> > >
> #########################################################################=
> > > ######=0A=
> > > # Accept Entries=0A=
> > >
> #########################################################################=
> > > ######=0A=
> > > # ACCEPT: Who can feed us, currently this action is ONLY needed for WSI
> =
> > > data=0A=
> > > #=0A=
> > > # accept <feedset> <pattern> <hostname pattern>=0A=
> > > #=0A=
> > > # accept anything from yourself=0A=
> > > #=0A=
> > > #accept ANY ".*" ^((localhost|loopback)|(127\.0\.0\.1\.?$))=0A=
> > > #=0A=
> > > # accept from your upstream site=0A=
> > > #=0A=
> > > # WSI is using ldm4 protocol so the accept is still required=0A=
> > > #accept WSI=0A=
> > > # .*=0A=
> > > # ^[a-z].*\.uni\.wsicorp\.com$=0A=
> > > #=0A=
> > >
> #########################################################################=
> > > ######=0A=
> > > # End =0A=
> > >
> #########################################################################=
> > > ######=0A=
> > >
> > > ------=_NextPart_000_0031_01C17D92.ADE46C10--
> > >
> > >
> > > ------- End of Forwarded Message
> > >
> > >
> >
>
>
