Gilbert-
We are running:
CMCS 10.0.0.1> show device
Device Type: S300N
MAC Address: 00-06-76-05-07-a4
DSP Firmware: Ver. 2, Rev. 11
FPGA Firmware: Ver. 2, Rev. 0
I thought that the latest advice was to upgrade to R2V11.
Rodger
On Sep 29, 2014, at 9:12 AM, Gilbert Sebenste <sebenste@xxxxxxxxxxxxxxxxxxxxx>
wrote:
> On Sun, 28 Sep 2014, Patrick L. Francis wrote:
>
>>
>> 4096, and 8192, but we continue to see these errors. Has anyone found the
>> best setting for our environment?
>> These preinstallation steps listed by Emmerson are what you need to do... I
>> can confirm that they work with the latest Debian, but have not tried on
>> Ubuntu... good luck
>> http://www.unidata.ucar.edu/software/ldm/ldm-current/noaaport/index.html
>
> Are you guys using the latest Novra firmware? We're using the R2V7 version,
> and we see don't see those errors from it...
>
> Also, what is your signal strength and C/N? NWS says C/N needs
> to be 17 or higher as their standard. When pointing the dish, peak for
> C/N, not signal strength, and yes, there is a slightly lower signal
> that results when you do it this way, but it is still very strong.
>
> Gilbert
>
> *******************************************************************************
> Gilbert Sebenste ********
> (My opinions only!) ******
> Staff Meteorologist, Northern Illinois University ****
> E-mail: sebenste@xxxxxxxxxxxxxxxxxxxxx ***
> web: http://weather.admin.niu.edu **
> Twitter: http://www.twitter.com/NIU_Weather **
> Facebook: http://www.facebook.com/niu.weather *
> *******************************************************************************
