Okay, silly me. I replaced it and things are now getting filed in 2 places
like I wanted. I think.
Thanks Daryl.
Patrick
----- Original Message -----
Sent: Wednesday, November 19, 2003 4:37 PM
> HI,
>
> You need to replace the @GEMTBL@ with your actual environment, I think.
>
> Daryl
>
> On Wed, 19 Nov 2003, Patrick O'Reilly wrote:
>
> >If I understand correctly, I can use either the global decoder entry OR
the
> >per type entries. Or is it possible to be using the global for default
> >decoding/filing and the per type for the few I want decoded/filed
> >seperately?
> >
> >Anyway, right now, I still have the global decoder uncommented in my
> >pqact.conf, and then I uncommented/edited a similar entry to the one
below.
> >So far, no data has made it to the place specified in the new ETA model
> >entry. And I'm seeing some errors. My pqact.conf entry:
> >
> >HRS ^[YZ].[BRU].*/mETA
> > PIPE decoders/dcgrib2 -d data/gempak/logs/dcgrib_ETA.log
> > -e GEMTBL=@GEMTBL@
> > data/gempak/model/www/YYYYMMDDHH_eta@@@.gem
> >
> >
> >
> >and I'm getting errors in my dcgrib_ETA.log
> >
> >
> >
> >[15019] 031119/1600 [DC 3] Version 5.6.l.1
> >
> >[15019] 031119/1600 [NA -1] cntrgrib1.tbl
> >
> >[15019] 031119/1600 [DCGRIB -51] can't open grib tables [NA -51], set
GEMTBL
> >
> >[15019] 031119/1600 [DC 5]
> >
> >[15019] 031119/1600 [DC 2] Number of bulletins read and processed: 0
> >
> >[15019] 031119/1600 [DC 6]
> >
> >
> >
> >Also, in my ldmd.log:
> >
> >
> >
> >Nov 19 21:42:17 thunder pqact[13788]: pipe_prodput: trying again
> >Nov 19 21:42:17 thunder pqact[13788]: pbuf_flush (17) write: Broken pipe
> >Nov 19 21:42:17 thunder pqact[13788]: pipe_dbufput:
>
>decoders/dcgrib2-ddata/gempak/logs/dcgrib_ETA.log-eGEMTBL=@GEMTBL@data/gemp
a
> >k/model/www/YYYYMMDDHH_eta@@@.gem write error
> >
> >
> >
> >So something is awry with my setup. BTW, the /www directory has 755
> >permissions, so ldm should be able to write in it, and it IS writing in
the
> >dcgrib_ETA.log, so the write error can't be either of those.
> >
> >
> >
> >Patrick
> >
> >
> >
> >Message -----
> >From: "Steve Chiswell" <chiz@xxxxxxxxxxxxxxxx>
> >To: "Patrick O'Reilly" <patrick.oreilly@xxxxxxx>
> >Cc: <ldm-users@xxxxxxxxxxxxxxxx>
> >Sent: Wednesday, November 19, 2003 11:36 AM
> >Subject: Re:Decode/File data in two directories
> >
> >
> >>
> >> Patrick,
> >>
> >> You do not need to use the global decoding pqact entry. I also provide
in
> >the
> >> decoders example, pqact entries on a per type basis. Also, if you
provide
> >a file
> >> name, the gribkey.tbl is not needed. For example, to decode
> >> the ETA grids, I provide in the pqact.gempak_decoders file:
> >>
> >> # ETA model output
> >> # -------------------
> >> # NOAAport ETA grids
> >> # Grid #211 80km CONUS: ^[YZ].Q.*/mETA
> >> # Grid #212 40km CONUS: ^[YZ].R.*/mETA
> >> # Grid #214 47.5km Alaska: ^[YZ].T.*/mETA
> >> # Grid #215 20km CONUS: ^[YZ].U.*/mETA
> >> # Grid #216 45km Alaska: ^[YZ].V.*/mETA
> >> # Grid #217 22.5km Alaska: ^[YZ].Y.*/mETA
> >> # Grid #218 12km CONUS: ^[YZ].B.*/mETA
> >> # Grid #242 11.25km Alaska:^[YZ].S.*/mETA
> >> # Select any/all grids desired from [QRTUVYBS]
> >>
> >> HDS ^[YZ].[QRTUVYBS].*/mETA
> >> PIPE decoders/dcgrib2 -d data/gempak/logs/dcgrib2_ETA.log
> >> -e GEMTBL=@GEMTBL@
> >> data/gempak/model/YYYYMMDDHH_eta@@@.gem
> >>
> >> In the above, select which grids you want, and modify the list
[QRTUVYBS]
> >> accordingly. The @@@ in the output file name will be replaced by the
> >> grid number found in the data. You can modify the path on the output
file
> >> to anywhere independent of the gribkey.tbl entry.
> >>
> >>
> >> Steve Chiswell
> >>
> >>
> >> On Wed, 19 Nov 2003, Patrick O'Reilly wrote:
> >>
> >> >
> >> > Hi again,
> >> > We at UNI were having mail server problems yesterday, and seem to be
> >lingering
> >> > today, therefore none of your responses are getting through to me, I
> >have to
> >> > read them from ldm-users archive. Anyway, Ben Cotton's reply about
the
> >two
> >> > file entries for one product in pqact.conf is adequate for data that
you
> >> > simply file, but for the global grid data decoder I have:
> >>
> >> >
> >> > # Global GRIB decoding action. Products stored maintained in
> >> > $GEMTBL/grid/gribkey.tbl
> >> > #
> >> > HDS|NMC2 ^([HOYZ]|/afs)
> >> > PIPE decoders/dcgrib2 -v 1 -d data/gempak/logs/dcgrib.log
> >> > -e GEMTBL=/home/gempak/GEMPAK5.6/gempak/tables
> >> >
> >> > where the table in GEMPAK tells the ldm where to file and what to
name
> >the
> >> > data if I'm not mistaken. How can I tell the ldm in a similar entry
to
> >file
> >> > only certain types of data in another directory? I can figure out
the
> >> > feedtype/reg exp in the first line, but the rest is not clear. Do I
> >need to
> >> > pipe the subset of grids into a script of some sort? Thanks again
for
> >your
> >> > suggestions.
> >> >
> >> > Patrick
> >> > _______________________________________
> >> > Patrick O'Reilly
> >> > Meteorological Decision Support Scientist
> >> > The STORM Project - University of Northern Iowa
> >> > patrick.oreilly@xxxxxxx ~ ph: 319-273-3789
> >> > http://www.uni.edu/storm
> >> >
> >> > "No trees were killed in the making of this e-mail...however,
> >> > a large number of electrons were horribly inconvenienced."
> >> >
> >
> >
>
> /**
> * Daryl Herzmann (akrherz@xxxxxxxxxxx)
> * Program Assistant -- Iowa Environmental Mesonet
> * http://mesonet.agron.iastate.edu
> */
>
