Re: [gembud] problem getting 1.0 degree GEMPAK files from new CONDUIT GFS feed

David, as the ldm user 'ldmadmin pqactHUP' would do the refresh of the
paqct processes. Just an FYI. ;)
 On Jan 15, 2015 10:14 PM, "David Ovens" <ovens@xxxxxxxxxxxxxxxxxxxx> wrote:

> Hello gembuds,
>
> Thanks to Steve Chiswell's suggestions about editing
> $GEMTBL/grid/grdnav.tbl AND $GEMTBL/grid/gribkey.tbl I got that set up
> for automatic filing of all the GFS grids (and I took out the 703 grid
> references in both grdnav.tbl and gribkey.tbl).
>
> Even after doing that, I was still running into trouble due to the
> fact that I copied a pqact line out of an email and it used a SPACE
> and not a TAB between the feedtype and prodID.  Once that error was
> corrected, I issued a "kill -HUP $process_id" to the appropriate
> process_id for that pqact job, and all started working great.
>
> Thanks for your help everyone.
>
> David
>
>
> On Wed, Jan 14, 2015 at 09:01:51PM -0800, David Ovens wrote:
> > Hello Gembuds,
> >
> > Most of our scripts are working with the new GFS file names.  However,
> > I am not getting any 1.0 degree GEMPAK files produced, despite having
> > the GRIB2 files for them.
> >
> > This entry from pqact.gempak_decoders_grid
> >
> >  CONDUIT prod/gfs.*pgrb2
> >  PIPE decoders/dcgrib2 -d data/gempak/logs/dcgrib2_CONDUITgfs2.log
> >  -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> >
> > I know is attempting to process all resolutions of the grids, and I
> > get the gfs0.5deg/*gfs.gem files.  But I do not get the expected
> > gfs/YYYYMMDDHH_gfs.gem files.
> >
> > Here are the current relevant entries that I have in my
> > /home/gempak/NAWIPS/gempak/tables/grid/gribkey.tbl table including a
> > comment about the gfs703.gem that I think is the relevant one:
> >
> > !center sub modelid grid   Output grid file name
>  max_grids
> > !
> > ! GFS grids
> > 007   x   077,81,96 003    data/gempak/model/gfs/YYYYMMDDHH_gfs003.gem
>  29000
> > 007   x   077,81,96 004
> data/gempak/model/gfs0.5deg/YYYYMMDDHHfFFF_gfs.gem   29000
> > ! as of 11/8/2007, gfs703.gem file comes from GRIB2 version of 1-degree
> GFS from CONDUIT
> > 007   x   077,81,96 703    data/gempak/model/gfs/YYYYMMDDHH_gfs.gem
>  29000
> > 007   x   077,81,96 @@@    data/gempak/model/gfs/YYYYMMDDHH_gfs@@@.gem
>  29000
> >
> > Does anyone else have different entries in their gribkey.tbl file that
> > are allowing them to get a GEMPAK file for the 1.0 degree GFS grids?
> >
> > NOTE: I have been able to manually create the file with the new grids
> > doing this from my conduit/gfs.2015011412 directory:
> >
> >  foreach i (gfs.t12z.pgrb2.1p00.f*)
> >   dcgrib2 -m 35000 -d ~/logs/test.gfs1p00.log -e GEMTBL=$GEMTBL \
> >   $GEMDATA/model/gfs/2015011412_gfs.gem < $i
> >  end
> >
> > and that put 32,972 grids into the file, so I'll be increasing the
> > 29000 max value in the table for sure.  I just have not been able to
> > figure out what is wrong with the gribkey.tbl entries.
> >
> > Thanks for any help.
> >
> > David
> > --
> > David Ovens            e-mail: ovens@xxxxxxxxxxxxxxxxxxxx
> > Research Meteorologist    phone: (206) 685-8108
> > Dept of Atm. Sciences      plan: Real-time MM5 forecasting for the
> > Box 351640                        Pacific Northwest
> > University of Washington          http://www.atmos.washington.edu/mm5rt
> > Seattle, WA  98195               Weather Graphics and Loops
> >
> http://www.atmos.washington.edu/~ovens/loops
> >
> >
> > On Wed, Jan 14, 2015 at 02:04:48PM -0700, Michael James wrote:
> > > Hello GEMPAK users,
> > >
> > > With the update to global GFS file naming today on CONDUIT, I've
> > > attached a new pqact.gempak_decoders_grid template file.  The 1800 UTC
> > > run for January 14, 2015 is the first run on CONDUIT using the new
> > > product IDs.
> > >
> > > The attached file can also be found online at
> > >
> https://github.com/Unidata/gempak/blob/master/ldm/etc/templates/pqact.gempak_decoders_grid
> > >
> > > The new template should be put in $NAWIPS/ldm/etc/templates/ and the
> > > program $NAWIPS/ldm/gen_pqact.csh run again to re-create the LDM pqact
> > > files, which will then need to be manually copied to the appropriate
> > > LDM etc directory.
> > >
> > > You can also make a quick manual edit:
> > >
> > > Old:
> > >
> > > # 1.0 degree GFS data
> > > # 2.5 degree GFS data
> > > CONDUIT prod/gfs.*pgrb[^2]
> > > PIPE decoders/dcgrib2 -d data/gempak/logs/dcgrib2_CONDUITgfs.log
> > > -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> > > #
> > > # 0.5 degree GFS data
> > > CONDUIT prod/gfs.*pgrb2
> > > PIPE decoders/dcgrib2 -d data/gempak/logs/dcgrib2_CONDUITgfs2.log
> > > -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> > >
> > > New:
> > >
> > > # 0.5 degree GFS data - gfs.tCCz.pgrb2.0p50.fFFF
> > > # 1.0 degree GFS data - gfs.tCCz.pgrb2.1p00.fFFF
> > > # 2.5 degree GFS data - gfs.tCCz.pgrb2.2p50.fFFF
> > > CONDUIT prod/gfs.*pgrb2
> > > PIPE decoders/dcgrib2 -d data/gempak/logs/dcgrib2_CONDUITgfs.log
> > > -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> > >
> > >
> > > Michael James
> > > Unidata Program Center
> > > Boulder, CO
> >
> >
> > > _______________________________________________
> > > gembud mailing list
> > > gembud@xxxxxxxxxxxxxxxx
> > > For list information or to unsubscribe,  visit:
> http://www.unidata.ucar.edu/mailing_lists/
> >
> >
> > _______________________________________________
> > gembud mailing list
> > gembud@xxxxxxxxxxxxxxxx
> > For list information or to unsubscribe,  visit:
> http://www.unidata.ucar.edu/mailing_lists/
>
> --
> David Ovens              e-mail: ovens@xxxxxxxxxxxxxxxxxxxx
> Research Meteorologist    phone: (206) 685-8108
> Dept of Atm. Sciences      plan: Real-time MM5 forecasting for the
> Box 351640                        Pacific Northwest
> University of Washington          http://www.atmos.washington.edu/mm5rt
> Seattle, WA  98195               Weather Graphics and Loops
>
> http://www.atmos.washington.edu/~ovens/loops
>
> _______________________________________________
> gembud mailing list
> gembud@xxxxxxxxxxxxxxxx
> For list information or to unsubscribe,  visit:
> http://www.unidata.ucar.edu/mailing_lists/
>