NOTE: The decoders mailing list is no longer active. The list archives are made available for historical reasons.
On Tue, 21 Dec 2004, Francois Vandenberghe wrote:
Robb, Thank for the quick response. I have made the modifications you suggested, ie setting La1/Lo1 to the south west corner of the full ETA218 grid and setting the grid_number to the list of all the tiles (there are 54, see map at http://www.emc.ncep.noaa.gov/mmb/research/tiles.218.html). I ran into a new problem: it seems that the GRIB file carries the "255" code for all the tiles and I got the following error messages: Dec 21 15:54:04 gribtonc.exe[28513]: 374 grid 255 not in grid_number list in eta.t00z.awip21806.nc
francois, sometimes in stitched together grid files the grid numbers are not used, only 255 is used. so replace with grid_number = 255;
I have attached my CDL file for your information and put two tiled files (tile 23 and tile 32) at: ftp://ftp.rap.ucar.edu:incoming/irap/vandenb/eta.t00z.awip21806.23 ftp://ftp.rap.ucar.edu:incoming/irap/vandenb/eta.t00z.awip21806.32
i get connection timed out errors on retrieval or chdir errors GET ftp://ftp.rap.ucar.edu:incoming/irap/vandenb/eta.t00z.awip21806.23 > eta.t00z.awip21806.23 <HTML> <HEAD><TITLE>An Error Occurred</TITLE></HEAD> <BODY> <H1>An Error Occurred</h1> 404 Can't chdir to irap </BODY> </HTML>
Other files can be found under the naming eta.tAAz.awip218FF.TT (where AA is the analysis time, FF the forecast lead time and TT the tile number) at: ftp://ftpprd.ncep.noaa.gov/pub/data/nccf/com/eta/prod/eta.20041221/
i get: Can't build data connection: Connection timed out i'm working at home and my connection doesn't permit tranfering of large data files. if the above solution doesn't work, i look at it tomorrow. robb...
Thanks for the support, Francois On Tue, 21 Dec 2004, Robb Kambic wrote: > On Mon, 20 Dec 2004, Unidata Support wrote: > > > > > ------- Forwarded Message > > > > >To: support-decoders@xxxxxxxxxxxxxxxx > > >From: "Vandenberghe" <vandenb@xxxxxxxx> > > >Subject: netCDF Decoders - Decoding/Tiling ETA218 (12km) with gribtonc > > >Organization: ? > > >Keywords: 200412201842.iBKIgRcV018844 netCDF decoders gribtonc > > > > --=_76dbc2476f6428fae144519a869f88c1 > > Content-Type: text/plain; charset="ISO-8859-1" > > Content-Transfer-Encoding: 7bit > > > > Institution: NCAR > > Package Version: gribtonc > > Operating System: LINUX > > Hardware Information: Intel Pentium > > Inquiry: Hi, > > > > I am trying to use gribtonc to convert and tile the ETA 218 tiled > > products available from: > > > > ftpprd.ncep.noaa.gov:/pub/data/nccf/com/eta/prod/ > > Francois, > > i went to the site, there were no files available. > > > > I have attached my CDL file. The program works fine with one tile, but > > when I try to use it with several tiles, then I got the following error > > message: > > > > Dec 20 18:29:49 gribtonc.exe[29974]: 1, eta.t00z.awip21806.nc nav. > > mismatch La1: 33.011 != 19.9433 > > > I didn't receive the cdl but here' a few comments. the La1 and Lo1 should > be the south west corner of the full ETA218 domain, sound like you coded > ti correctly. the grib_number should be all the grid tiles, for ecmwf it > is: grid_number = 1,2,3,4,5,6,7,8,9,10,11,12 ; > > > Here 33.011 is the latitude of the south west corner of the tile, while > > 19.9433 is the south west corner of the full ETA218 domain. One tile > > having the dimensions 69x72 while the full domain have the dimensions > > 491x303. > > > > I was able to tile other products such as ECMWF tiled data which were > > not on a projection map. So I was wondering if the projection is the > > problem. > > all files should have the same projection > > robb... > > > > > > Thanks in advance for any help, > > > > Francois > > > >
============================================================================== Robb Kambic Unidata Program Center Software Engineer III Univ. Corp for Atmospheric Research rkambic@xxxxxxxxxxxxxxxx WWW: http://www.unidata.ucar.edu/ ==============================================================================
decoders archives: