NOTE: The decoders mailing list is no longer active. The list archives are made available for historical reasons.
On Mon, 3 Mar 2003, Unidata Support wrote:
------- Forwarded Message >To: support@xxxxxxxxxxxxxxxx >From: "Waylon Collins" <Waylon.Collins@xxxxxxxx> >Subject: Error with gribtocdl >Organization: UCAR/Unidata >Keywords: 200303011129.h21BTB308517 This is a multi-part message in MIME format. --------------7E19F6396570B56A1CAD3316 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Dear Unidata Support, When running gribtocdl on a linux box (uname -r = 2.4.7-10smp), an apparent error message appeared (attached.) Nevertheless, information appeared in the cdl file, but not the parameter information - I know for certain the grib file contained one parameter (Sea Surface Temperatrue with a Grib Code of 80), yet it was not referenced in the cdl file. The contents of the cdl file created are also attached. Any idea what the problem is? Waylon -- ********************************************************************** * Waylon G. Collins Voice: (361)289-0959 * * NOAA/National Weather Service E-Mail: Waylon.Collins@xxxxxxxx * * 300 Pinson Drive * * Corpus Christi, TX 78406 * * USA * ********************************************************************** --------------7E19F6396570B56A1CAD3316 Content-Type: text/plain; charset=us-ascii; name="gribtocdl_error" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="gribtocdl_error" gribtocdl -v sst.grib > sst.cdl Mar 01 11:08:13 gribtocdl[1524]: Starting Up Mar 01 11:08:13 gribtocdl[1524]: oversize GRIB product 2
Wayon, The grib products contain a size after the start of the product. Since gribtocdl didn't find the end of the grib product at a the predicted place, it gives error message "oversize GRIB product" and stops processing the grib. The problem might be a corrupted grib product or a grib product that has the wrong size in it. I would try another grib and see if you get the same error. It seems that gribtocdl "sort of" ignored the error and wrote out the cdl anyway but without the parameter. I'll probably fix gribtocdl to not write out the cdl if oversize error is encountered. Robb...
Mar 01 11:08:13 gribtocdl[1524]: EOF on input
Mar 01 11:08:13 gribtocdl[1524]: Exiting
Mar 01 11:08:13 gribtocdl[1524]: 0 WMO msgs, 0 GRIBs decoded, 0 written
--------------7E19F6396570B56A1CAD3316
Content-Type: text/plain; charset=us-ascii;
name="sst.cdl"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="sst.cdl"
netcdf sst.grib{
dimensions:
record = UNLIMITED ; // (reference time, forecast time)
lat = 0 ;
lon = 0 ;
datetime_len = 21 ;
nmodels = 0 ;
ngrids = 0 ;
nav = 1 ;
nav_len = 100 ;
variables:
double reftime(record) ; // reference time of the model
reftime:long_name = "reference time" ;
reftime:units = "hours since 1992-1-1" ;
double valtime(record) ; // forecast time ("valid" time)
valtime:long_name = "valid time" ;
valtime:units = "hours since 1992-1-1" ;
:record = "reftime, valtime" ; // "dimension attribute" -- means
// (reftime, valtime) uniquely
// determine record
char datetime(record, datetime_len) ; // derived from reftime
datetime:long_name = "reference date and time" ;
// units YYYY-MM-DD hh:mm:ssZ (ISO 8601)
float valtime_offset(record) ; // derived as valtime-reftime
valtime_offset:long_name = "hours from reference time" ;
valtime_offset:units = "hours" ;
// The following lat and lon coordinate variables are redundant,
// since the navigation variables provide the necessary information.
// The extra information is included here for human readability.
float lat(lat) ;
lat:long_name = "latitude" ;
lat:units = "degrees_north" ;
float lon(lon) ;
lon:long_name = "longitude" ;
lon:units = "degrees_east" ;
long model_id(nmodels) ;
model_id:long_name = "generating process ID number" ;
// navigation variables all use nav dimension
char nav_model(nav, nav_len) ; // navigation parameterization
nav_model:long_name = "navigation model name" ;
int grid_type_code(nav) ;
grid_type_code:long_name = "GRIB-1 GDS data representation type"
;
char grid_type(nav, nav_len) ;
grid_type:long_name = "GRIB-1 grid type" ;
char grid_name(nav, nav_len) ;
grid_name:long_name = "grid name" ;
int grid_center(nav) ;
grid_center:long_name = "GRIB-1 originating center ID" ;
int grid_number(nav, ngrids) ;
grid_number:long_name = "GRIB-1 catalogued grid numbers" ;
grid_number:_FillValue = -9999 ;
char i_dim(nav, nav_len) ;
i_dim:long_name = "longitude dimension name" ;
char j_dim(nav, nav_len) ;
j_dim:long_name = "latitude dimension name" ;
int Ni(nav) ;
Ni:long_name = "number of points along a latitude circle" ;
int Nj(nav) ;
Nj:long_name = "number of points along a longitude
circle" ;
float La1(nav) ;
La1:long_name = "latitude of first grid point" ;
La1:units = "degrees_north" ;
float Lo1(nav) ;
Lo1:long_name = "longitude of first grid point" ;
Lo1:units = "degrees_east" ;
float La2(nav) ;
La2:long_name = "latitude of last grid point" ;
La2:units = "degrees_north" ;
float Lo2(nav) ;
Lo2:long_name = "longitude of last grid point" ;
Lo2:units = "degrees_east" ;
float Di(nav) ;
Di:long_name = "Longitudinal direction increment" ;
Di:units = "degrees" ;
float Dj(nav) ;
Dj:long_name = "Latitudinal direction increment" ;
Dj:units = "degrees" ;
byte ResCompFlag(nav) ;
ResCompFlag:long_name = "resolution and component flags" ;
// end of navigation variables
// global attributes
:history = "2003-03-01 05:08:13 - created by gribtocdl 1.3 -
31.05.2002" ;
:title = "sst.grib" ;
:Conventions = "NUWG" ;
:version = 0.0 ;
data:
model_id = 1009 ;
// Navigation
nav_model = "GRIB1" ;
grid_type_code = 0 ;
grid_type = "Latitude/Longitude" ;
grid_name = " " ;
grid_center = 0 ;
grid_number = ;
i_dim = "lat" ;
j_dim = "lon" ;
Ni = 0 ;
Ni = 0 ;
Nj = 0 ;
La1 = 0.000000 ;
Lo1 = 0.000000 ;
La2 = 0.000000 ;
Lo2 = 0.000000 ;
Di = 0.000000 ;
Dj = 0.000000 ;
ResCompFlag = 0 ;
lon = 0.00 ;
lat = 0.00 ;
}
--------------7E19F6396570B56A1CAD3316--
------- End of Forwarded Message
============================================================================== Robb Kambic Unidata Program Center Software Engineer III Univ. Corp for Atmospheric Research rkambic@xxxxxxxxxxxxxxxx WWW: http://www.unidata.ucar.edu/ ==============================================================================
decoders archives: