[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20000801: ETA gridded data & garp

Dana,

If these are ETA grids, then the file names should say eta instead of
mrf as you show below. 

So, presumably you would have file names like:
2000072600_eta_80km_211.gem   

The two lines in Garp_defaults that acontrol the model menu are
modelkeys and modellabels. The modelkeys are the strings used to uniquely
identify the model in the $HDS directory. The modellabels are the strings to 
present
in the pull down menu to relate to each modelkey.

By default, the pqact.conf entries I provide store the ETA 211 grids as
YYYYMMDDHH_eta211.gem, so the modelkey that uniquely identifies these
files in the data directory is eta211 (eg, eta211 is a string within the
file names in the data directory that can differentiate it from other
ETA files, such as the 212 40km grids in YYYYMMDDHH_eta212.gem).

To use the file name 2000072600_eta_80km_211.gem as shown above,
you might use the modelkey eta_80 instead of the eta211 as I suggest, eg:
modelkeys       : "eta_80, etc.....
modellabels     : "ETA 80km"

If you chose not to name the files as I do, then you will want to
change all the eta211 strings in the configuration file, eg:
eta211_proj
eta211_garea
and the widget defaults:

# Widget defaults
#
# Choose default values for the model, vertical coordinate, levels,
# function, default fdf chapters, cross-section line, time-height
# station, vertical profile axis types, radar ring station, upper
# air levels and upper air filter.
#
model           : eta211


The_proj and _garea above define the default map region to use for a given
modelkey. The model tag above is the default model that shows up when
you first pop up the model window.

Lastly, the $GARPHOME/fdf/scalar and vector directories provide directories
for the gfunc optionds for each modelkey. You would want to create a 
link from eta211 to eta_80 if you used you naming above.

Steve Chiswell
Unidata User SUpport

>From: Dana Price <address@hidden>
>Organization: UCAR/Unidata
>Keywords: 200008011912.e71JCcT24303

>I'm trying to display ETA grids with Garp.. I have the 80km conus data
>decoded and saved to:
>
>wx.envsci.rutgers.edu:/wx/data/gempak/hds[14]% ls
>2000072600_mrf_80km_211.gem  2000073100_mrf_80km_211.gem
>2000072612_mrf_80km_211.gem  2000073112_mrf_80km_211.gem
>2000072700_mrf_80km_211.gem  2000080100_mrf_80km_211.gem
>2000072712_mrf_80km_211.gem  2000080112_mrf_80km_211.gem
>
>$HDS is set to /wx/data/gempak/hds, and
>gridsT to $(HDS)/@(YYYYMMDDHH)_*.gem in Garp_defaults
>
>When I open the Model Plan Projection window in Garp, I get no available
>times listed.  I can click the Info tab, and get info on the grids:
>
>File is /wx/data/gempak/hds/2000072600_mrf_80km_211.gem.
>Number of Grids 1500, maxPossibleGrids 1500.
>Count     Time1            Time2           Level1   Level2    VCoord
>Field
>
>    0 000726/0000F000                           0       -1     EATM
>PWTR
>    1 000726/0000F000                        3000        0     HAGL
>HLCY
>
>etc., etc..
>
>I should be able to display these, correct?
>
>Dana Price
>-----------------------------------
>Asst. Systems Administrator
>Rutgers University
>Dept. of Environmental Sciences
>Center for Environmental Prediction
>-----------------------------------
>
>
>
>