George,
The tcpdump(1) output indicates that UDP packets are being multicast to
address 224.0.1.3. The LDM configuration-file, however, doesn't execute a
program that listens to that address.
Incidentally, the "-x" (debug) option will likely result in too much
logging.
Regards,
Steve Emmerson
On Thu, Jun 11, 2015 at 10:57 AM, George Trojan <george.trojan@xxxxxxxx>
wrote:
> It must be something stupid, but I am lost...
>
> Installed ldm-6.12.14 on Centos 6.6. Novra box sends data:
>
> # tcpdump -i eth1 -nn
> 16:37:34.094084 IP 10.0.9.54.38135 > 224.0.1.3.1203: UDP, length 4032
> 16:37:34.094286 IP 10.0.9.54 > 224.0.1.3: udp
> 16:37:34.094390 IP 10.0.9.54 > 224.0.1.3: udp
> 16:37:34.094539 IP 10.0.9.54.38135 > 224.0.1.3.1203: UDP, length 4032
> 16:37:34.094674 IP 10.0.9.54 > 224.0.1.3: udp
> 16:37:34.094825 IP 10.0.9.54 > 224.0.1.3: udp
> ^C
> # ifconfig eth1
> eth1 Link encap:Ethernet HWaddr 00:25:B3:E2:5E:4E
> inet addr:10.0.5.12 Bcast:10.0.5.255 Mask:255.255.255.0
> inet6 addr: fe80::225:b3ff:fee2:5e4e/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:151147 errors:0 dropped:0 overruns:0 frame:0
> TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:40382553 (38.5 MiB) TX bytes:734 (734.0 b)
>
> In ldmd.conf I have:
> # NMC
> EXEC "noaaportIngester -x -b 8096 -m 224.0.1.1 -u 1"
> # GOES
> #EXEC "noaaportIngester -n -b 8096 -m 224.0.1.2 -u 2"
> EXEC "dvbs_multicast -x -m 224.0.1.2"
> EXEC "readnoaaport -m 224.0.1.2 -u 2"
>
> After starting ldm the only entries in the log files are:
> # tail ldmd.log
> Jun 11 16:42:20 dvb1-aawu ldmd[12831] NOTE: Starting Up (version: 6.12.14;
> built: Jun 10 2015 17:34:55)
> Jun 11 16:42:20 dvb1-aawu ldmd[12831] NOTE: Using local address
> 0.0.0.0:388
> Jun 11 16:42:20 dvb1-aawu dvbs_multicast[12834] DEBUG: shmfifo_create():
> Got semaphore: pid=12834, semid=393219
> # tail nmc.log
> Jun 11 16:40:55 dvb1-aawu noaaportIngester[12714] NOTE:
> Number 0
> Jun 11 16:40:55 dvb1-aawu noaaportIngester[12714] NOTE:
> % -nan
> Jun 11 16:40:55 dvb1-aawu noaaportIngester[12714] NOTE: Full FIFO:
> Jun 11 16:40:55 dvb1-aawu noaaportIngester[12714] NOTE:
> Number 0
> Jun 11 16:40:55 dvb1-aawu noaaportIngester[12714] NOTE:
> % -nan
> Jun 11 16:40:55 dvb1-aawu noaaportIngester[12714] NOTE: Products:
> Jun 11 16:40:55 dvb1-aawu noaaportIngester[12714] NOTE:
> Inserted 0
> Jun 11 16:40:55 dvb1-aawu noaaportIngester[12714] NOTE: Mean
> Rate 0/s
> Jun 11 16:40:55 dvb1-aawu noaaportIngester[12714] NOTE:
> ----------------------------------------
> Jun 11 16:42:20 dvb1-aawu noaaportIngester[12833] DEBUG: Mapping 2004615168
>
> Output from strace:
> 12833 is noaaportIngester
> # strace -p 12833
> Process 12833 attached - interrupt to quit
> futex(0x7fb9597bc9d0, FUTEX_WAIT, 12837, NULL
>
> and, for dvb_multicast:
> # strace -p 12834
> Process 12834 attached - interrupt to quit
> recvfrom(4,
>
> Any hints what should I check? I have noaaport 1.7.1 with ldm-6.9.8
> getting data from the same Novra receiver.
>
> George
>
>
>
> _______________________________________________
> noaaport mailing list
> noaaport@xxxxxxxxxxxxxxxx
> For list information or to unsubscribe, visit:
> http://www.unidata.ucar.edu/mailing_lists/
>
