[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20030707: building netcdf-3.5.1b+ under Mac OS X using Absoft f95

Swen,

>Date: Sun, 6 Jul 2003 22:12:13 +0200
>From: Swen Metzger <address@hidden>
>Organization: ?
>To: Steve Emmerson <address@hidden>
>Subject: Re: 20030630: building netcdf-3.5.1b+ under Mac OS X using Absoft f95 

The above message contained the following:

> the problem is now solved with the help of Absoft support (see below).
> 
> Regards, Swen

That's great!

Regards,
Steve Emmerson

> Begin forwarded message:
> 
> > From: "address@hidden" <address@hidden>
> > Date: Thu Jul 3, 2003  6:09:06 PM Europe/Berlin
> > To: Swen Metzger <address@hidden>
> > Subject: Re: f90/f95 crahses with -Rb -Rc
> > Reply-To: address@hidden
> >
> > There was a problem in cfortran.h, but, I have reconfigured 
> > install.mac to emulate the g77
> > compiler and everything works as it should.  Replace your install.mac 
> > file with the attached
> > version then go through the "source ../install.mac", "make clean", and 
> > "make" steps again
> > and the tests will all pass.  You may have to change the paths to f90 
> > in install.mac because
> > it looks like you have moved the drivers on your system.
> >
> > -------------
> > Scott Campbell
> > Absoft Technical Support
> > address@hidden
> > http://www.absoft.com/support.html
...

> --Apple-Mail-16--241761333
> Content-Disposition: inline;
>       filename=install.mac
> Content-Transfer-Encoding: 7bit
> Content-Type: image/mac;
>       x-unix-mode=0666;
>       name="install.mac"
> 
> #setenv CC cc
> #setenv FC  /Applications/Absoft/bin/f95
> #setenv F90 /Applications/Absoft/bin/f90
> #setenv CXX g++
> #setenv CFLAGS -O
> #setenv CPPFLAGS "-DpgiFortran"
> #setenv FFLAGS -Cpp
> #setenv F90FLAGS -Cpp
> #setenv CXXFLAGS
> 
> #setenv CPP
> #setenv AR
> #setenv AS
> #setenv LD
> #setenv NM
> 
> #setenv ARFLAGS
> #setenv NMFLAGS
> #setenv FPP
> #setenv M4FLAGS
> #setenv LIBS
> #setenv FLIBS
> #setenv FLDFLAGS
> 
> # Preprocessing:
> setenv CPP     "cc -E -traditional-cpp"
> setenv CXX     "cc -E -traditional-cpp"
> setenv CPPFLAGS "-Df2cFortran"
> setenv CXXFLAGS "-Df2cFortran"
> 
> # Compilation:
> setenv CC       cc
> setenv CXX      c++
> setenv FC       /Applications/Absoft/bin/f95
> setenv F90      /Applications/Absoft/bin/f95
> setenv CFLAGS   "-I../config -I 
> /System/Library/Frameworks/Kernel.framework/Versions/A/Headers/sys -O 
> -DAbsoftProFortran"
> setenv CFLAGS   " "
> setenv CXXFLAGS " "
> #setenv F90FLAGS "-Yaltivec -O3 -N11 -N113 -M80 -nowdir"
> setenv FFLAGS   "-O -Yaltivec -YEXT_NAMES=LCS -B108 -YCFRL=1 -YCOM_NAMES=LCS 
> -YCOM_SFX=_ -YCOM_PFX=_ -lU77"
> setenv F90FLAGS "-O -Yaltivec -YEXT_NAMES=LCS -B108 -YCFRL=1 -YCOM_NAMES=LCS 
> -YCOM_SFX=_ -YCOM_PFX=_ -lU77"
> #setenv FFLAGS " "
> #setenv FFLAGS   "-Yaltivec -O -z 4 -T 1 -t 5 -s -W 132 -N11 -nowdir -YCFRL=1 
> -YDEALLOC=ALL -YEXT_SFX='_' -YEXT_NAMES=LCS"
> #setenv F90FLAGS "-Yaltivec -O -z 4 -T 1 -t 5 -s -W 132 -N11 -nowdir -YCFRL=1 
> -YDEALLOC=ALL -YEXT_SFX='_' -YEXT_NAMES=LCS"
> #
> #setenv FFLAGS   "-Yaltivec -g -z 4 -T 1 -t 5 -s -W 132 -N11 -nowdir -YCFRL=1 
> -YDEALLOC=ALL -lU77"
> #setenv F90FLAGS "-Yaltivec -g -z 4 -T 1 -t 5 -s -W 132 -N11 -nowdir -YCFRL=1 
> -YDEALLOC=ALL -lU77"
> 
> # Misc. Utilities:
> setenv AR
> setenv ARFLAGS  cru
> 
> rm -f config.log config.cache config.status macros.make
> ./configure --prefix=/Volumes/Data/Users/metzger/ECHAM/netcdf-3.5.1b
> 
> #rm -f gmake.log
> #gmake >&! gmake.log &
> 
> --Apple-Mail-16--241761333
> Content-Transfer-Encoding: 7bit
> Content-Type: text/plain;
>       charset=US-ASCII;
>       format=flowed
> 
> 
> 
> --Apple-Mail-16--241761333--