[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 19991112: Garp level display problem

Chiz,

That was the problem, there was another isentropic file which was missing
some levels.  I deleted that and Viola, all levels appeared in the model I
wanted to look at. 

Thanks!!

Dave

> -----Original Message-----
> From: Unidata Support [mailto:address@hidden]
> Sent: Friday, November 12, 1999 3:09 PM
> To: David Fitzgerald
> Cc: address@hidden
> Subject: 19991112: Garp level display problem 
> 
> 
> 
> Dave,
> 
> I looked at the file and have no trouble popping up the level 
> widget here.
> Do you have other files in your models directory with the _thta name?
> If you have an earlier model run that garp opens first, it 
> will use the available 
> coordinates in the first file opened. Then, you could be 
> missing the levels
> even though they are present in your later file.
> 
> Garp tries to speed things up by only looking in the first file for
> the levels and coordinates, since they are expected to be the same
> each model run, and it would be alot slower to look in each file.
> However, it does create a problem if you are missing those
> coordinates in another file.
> 
> Otherwise, I'd be happy to login and take a look if you
> still don't see anything wrong.
> 
> Steve Chiswell
> Unidata User support
> 
> 
> 
> >From: David Fitzgerald <address@hidden>
> >Organization: .
> >Keywords: 199911122136.OAA03285
> 
> >chiz,
> >
> >Everyone has read rights to the file and gdinfo shows that 
> the levels and
> >parameters are there.
> >
> >I put Garp_defaults and the model file 99111112_thta.gem on 
> our anonymous
> >ftp site.
> >Ftp to snowball.millersv.edu as anonymous.  The file are in 
> a subdirectory
> >of pub called unidata.  
> >
> >Thanks for you help!
> >
> >Dave
> >
> >
> >> -----Original Message-----
> >> From: Unidata Support [mailto:address@hidden]
> >> Sent: Friday, November 12, 1999 1:11 PM
> >> To: David Fitzgerald
> >> Cc: address@hidden
> >> Subject: 19991112: Garp level display problem 
> >> 
> >> 
> >> 
> >> David,
> >> 
> >> Several things to check:
> >> 
> >> 1) do you all have read permission on the file? If you set up the
> >>    data file as one user, and nobody else can look at it, then
> >>    that could be tha cause. This would probably be accompanied by
> >>    no times showing up in the Available Times box.
> >> 
> >> 2) Verify that Garp can look at the grids using the "Info" (gdinfo)
> >>    broswer to list out the levels, and verify that everything 
> >> is still there.
> >> 
> >> Otherwise, you might want to ftp me the file in question and your
> >> Garp_defaults settings.
> >> 
> >> Steve Chiswell
> >> Unidata User SUpport
> >> 
> >> 
> >> 
> >> >From: David Fitzgerald <address@hidden>
> >> >Organization: .
> >> >Keywords: 199911121951.MAA00213
> >> 
> >> >Hi,
> >> >
> >> >I am having a weird problem with Garp.  I am creating some 
> >> isentropic maps
> >> >using gempak and have been using GARP to display them.   I 
> >> modified the
> >> >Garp_defaults file to allow the new isentropic maps to be 
> >> viewed and all
> >> >seemed well for a while.  Here is the strange problem.  When 
> >> I go to Model
> >> >Plan View, pick isentropic for my model, choose isentropic 
> >> for vertical
> >> >coordinates (which is the way I have it setup in 
> >> Garp_defaults), I can
> >> >usually choose the isentropic level by pressing the Level 1 
> >> button.  I did
> >> >this this morning just fine after creating an isentropic 
> >> grid for a class
> >> >this afternoon.  Now during class when the students go to 
> choose an
> >> >isentropic level from the very same model, the button is 
> >> greyed out and they
> >> >can't pick any level.  I ran Garp on my own account and the 
> >> same thing
> >> >happens to me.  I didn't change the isentropic grid at all 
> >> and now Garp
> >> >doesn't allow me to choose the level, where it DID allow 
> me to do so
> >> >earlier.  
> >> >Any ideas?
> >> >
> >> >Thanks!
> >> >
> >> >Dave
> >> >
> >> >
> >> >++++++++++++++++++++++++++
> >> >David Fitzgerald
> >> >System Administrator        Phone: (717) 871-2394
> >> >Millersville University          Fax:     (717) 871-4725
> >> >Millersville, PA 17551         E-mail: address@hidden
> >> >
> >> >
> >> 
> >> **************************************************************
> >> ************** <
> >> Unidata User Support                                    UCAR 
> >> Unidata Program <
> >> (303)497-8644                                                 
> >>  P.O. Box 3000 <
> >> address@hidden                                   
> >> Boulder, CO 80307 <
> >> --------------------------------------------------------------
> >> -------------- <
> >> Unidata WWW Service                        
> >http://www.unidata.ucar.edu/      <
> >*************************************************************
> ***************
> ><
> >
> 
> **************************************************************
> ************** <
> Unidata User Support                                    UCAR 
> Unidata Program <
> (303)497-8644                                                 
>  P.O. Box 3000 <
> address@hidden                                   
> Boulder, CO 80307 <
> --------------------------------------------------------------
> -------------- <
> Unidata WWW Service                        
> http://www.unidata.ucar.edu/      <
> **************************************************************
> ************** <
>