[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

19990201: Problem with NAWIPS-5.4 Install - Gemenviron error

Dave,

Did you try setting your path as I mentioned?
 setenv PATH .:/usr/ccs/bin:/opt/SUNWspro/bin:/bin:/usr/bin

I was wondering if your path was too long.
Go ahead and type: printenv 
send me the output. Maybe I'll be able to tell at what point the source 
command is failing from what variables are set/missing.

Steve Chiswell

>From: Dave Levinson <address@hidden>
>Organization: USDA-ARS NWRC
>Keywords: 199902011734.KAA06035

>This is a multi-part message in MIME format.
>--------------A5916DD293A7223A0449CAB0
>Content-Type: text/plain; charset=us-ascii
>Content-Transfer-Encoding: 7bit
>
>Steve:
>
>I checked the shell I was using, but I always run csh by default, so
>that wasn't the problem.  I only changed the path for the setenv command
>in Gemenviron:
>
>setenv NAWIPS /usr/local/src/NAWIPS
>
>my guess is this isn't the problem.  So, I attached the script for
>Gemenviron and maybe you can find the problem!  I guess its possible
>that my version is fouled up in some way.
>
>Thanks for your help with this!
>
>Dave.
>
>
>
>Unidata Support wrote:
>
>> >From: Dave Levinson <address@hidden>
>> >Organization: USDA-ARS NWRC
>> >Keywords: 199902011515.IAA02185
>>
>> >Dear Unidata support:
>> >
>> >I have had several problems loading the nawips software onto my SUN
>> >Ultra 10.  The latest problem involves the Gemenviron script which is
>> >"sourced" before compiling. On Friday we tried to source the
>> Gemenviron
>> >script, but kept getting the following message:
>> >
>> >>> source Gemenviron
>> >Word too long
>> >
>> >I don't know what this means, and I've asked others here at our lab
>> and
>> >they were also stumped!  If you could explain what could possibly
>> cause
>> >this and what we should do to correct/avoid this problem, I would
>> >appreciate it.
>> >
>> >Thanks,
>> >
>> >Dave.
>> >
>> >--
>> >Dr. David Levinson, Meteorologist
>> >Northwest Watershed Research Center
>> >USDA-Agricultural Research Service
>> >800 Park Blvd., Plaza IV, Suite 105
>> >Boise, Idaho 83712
>> >Ph (208) 422-0724, Fax (208) 334-1502
>> >
>> >
>> >
>>
>> Dave,
>>
>> Verify that you are running a csh when you source the Gemenviron
>> script.
>> Perhaps you have something strange with your shell or your path.
>> Try setting a basic path prior to sourcing and building:
>>
>> setenv PATH .:/usr/ccs/bin:/opt/SUNWspro/bin:/bin:/usr/bin
>> source Gemenviron
>>
>> if you still have trouble, verify that:
>> echo $SHELL
>>
>> responds with /bin/csh and please send the contents of the Gemenviron
>> script since its possible that upon editing it locally, it has gotten
>> fouled.
>>
>> Steve Chiswell
>> ****************************************************************************
>> Unidata User Support                                    UCAR Unidata
>> (303)497-8644                                                  P.O.
>> address@hidden                                   Boulder, CO
>> ----------------------------------------------------------------------------
>> Unidata WWW Service
>> ****************************************************************************
>>
>>
>--
>Dr. David Levinson, Meteorologist
>Northwest Watershed Research Center
>USDA-Agricultural Research Service
>800 Park Blvd., Plaza IV, Suite 105
>Boise, Idaho 83712
>Ph (208) 422-0724, Fax (208) 334-1502
>
>
>
>--------------A5916DD293A7223A0449CAB0
>Content-Type: text/plain; charset=us-ascii;
> name="Gemenviron"
>Content-Transfer-Encoding: 7bit
>Content-Disposition: inline;
> filename="Gemenviron"
>
># Gemenviron file for GEMPAK 5.2
>#
>#              Sets environment variables used in running GEMPAK
>#              UNIDATA Program Center 6/1/92 (PB)
>#              Revised 8/31/94 for GEMPAK 5.2
>#              Modified 12/95 for Gempak5.2.1/Nawips (Chiz)
>#               Modified  8/96 for Gempak5.4/NAWIPS (Chiz)
>#---------------------------------------------------------------------
>#  The command
>#               source Gemenviron
>#
>#  or the individual lines below, must be included in your .login or 
>#  .cshrc file!
>#---------------------------------------------------------------------
># <<CONFIGURE>>
>#  Please configure the following definitions to reflect your system:
>#
># Top level directory:
>   setenv NAWIPS /usr/local/src/NAWIPS
>   setenv GARPHOME $NAWIPS/garp
>   setenv GARP_PATH $GARPHOME/config
>#
># --------------------------------------------------------------------
># Make sure NAWIPS directory exists
>#
>if ( ! -d $NAWIPS ) then
>        echo "Can not find NAWIPS distribution."
>        echo 'Check Gemenviron NAWIPS definition ->' $NAWIPS
>        unsetenv NAWIPS
>        exit
>endif
>
>#try to determine operating system: command uname must be in path
>#
>if($?NA_OS == 0) then
>   set TMP_OS=`uname -s | tr '[A-Z]' '[a-z]'`
>   switch ($TMP_OS)
>        case "aix":
>           setenv NA_OS "aix"
>           breaksw
>        case hp-ux:
>          set OS_MAJOR=`uname -r | cut -f1,2 -d.`
>           if($OS_MAJOR == 'B.11') then
>              setenv XCFLAGS "-DSYSLOG_RETURNS_INT"
>           endif
>           setenv NA_OS "hpux"
>           breaksw
>        case irix64:
>           setenv XCFLAGS "-o32"
>        case irix:
>           setenv NA_OS "irix"
>           breaksw
>        case osf1:
>           setenv NA_OS "osf"
>           uac p noprint # supress warnings in xw driver for unaligned access
>           breaksw
>        case sunos:
>           set OS_MAJOR=`uname -r | sed 's/\..*//'`
>           set HARDWARE=`uname -i | tr '[A-Z]' '[a-z]'`
>           setenv NA_OS "sunos"
>           if($OS_MAJOR == 5) then
>              setenv NA_OS "sol"
>           endif
>           if(($NA_OS == 'sol')&&($HARDWARE == 'i86pc')) then
>              setenv NA_OS "x86"
>           endif
>           breaksw
>        case ultrix:
>           setenv NA_OS "ultrix"
>           breaksw
>       case linux:
>          setenv NA_OS "linux"
>          breaksw
>        case default:
>           echo "trouble determining operating system configuration"
>           echo "OS reported $TMP_OS"
>           exit
>   endsw
>endif
>
># --------------------------------------------------------------------
>#
># GEMPAK 5.4 directory:
>#
>   setenv GEMPAKHOME $NAWIPS/gempak5.4
>#
># Directory for storing object libraries (GEMPAK + related software):
>#
>   setenv GEMLIB    $NAWIPS/lib/${NA_OS}
>#
># Directory for executables (GEMPAK + related software):
>#
>   setenv GEMEXE    $NAWIPS/bin/${NA_OS}
>#
># Remaining directories used by GEMPAK  (leave as is):
>#
>   setenv GEMPDF    $GEMPAKHOME/pdf
>   setenv GEMTBL    $GEMPAKHOME/tables
>   setenv GEMERR    $GEMPAKHOME/error
>   setenv GEMHLP    $GEMPAKHOME/help
>   setenv GEMMAPS   $GEMPAKHOME/maps
>   setenv GEMNTS    $GEMPAKHOME/nts
>#
>#  NAWIPS specific directories
>#
>   setenv NAWIPS_EXE   $GEMEXE
>   setenv NAWIPS_LIB   $GEMLIB
>   setenv NAWIPS_INC   $NAWIPS/include
>   setenv NAWIPS_HELP          $NAWIPS/help
>   setenv NAWIPS_TABLES        $NAWIPS/tables
>   setenv NWX_TABLES   $NAWIPS_TABLES/nwx
>#
># If you are installing on DEC, and therefore must
># rebuild the maps, set GEMMAPS environment
># variable to:
>   if(($NA_OS == "osf")||($NA_OS == "ultrix")||($NA_OS == "linux")||($NA_OS ==
>  "x86")) then
>        setenv GEMMAPS $GEMPAKHOME/maps/decmaps
>        echo "Setting to decmaps"
>   endif
>#
>   setenv BRDGDIR   $NAWIPS/unidata/ldmbridge
>#
># Add NAWIPS to the X applications resource path.
>#
>set xresources=""
>
>if ( -d $NAWIPS/resource ) then
>        set xresources="$NAWIPS/resource/%N"
>        if ( $?XUSERFILESEARCHPATH ) then
>           setenv XUSERFILESEARCHPATH ${xresources}:${XUSERFILESEARCHPATH}
>        else
>           setenv XUSERFILESEARCHPATH $xresources
>        endif
>endif
>
>#
># 
># Set PATH to include $GEMEXE
>#
>setenv SCRIPTS_EXE   $NAWIPS/bin/scripts
>setenv PATH ${PATH}:${GEMEXE}:${SCRIPTS_EXE}
>
>#
># --------------------------------------------------------------------
># <<CONFIGURE>>
># Data directories, either real time or the Hurricane Bob sample data set:
>#
>#  setenv GEMDATA   $GEMPAKHOME/data
>   setenv GEMDATA   /var/data/ldm/gempak
>#
>   setenv NTRANS_META  $GEMDATA/meta
>   setenv TEXT_DATA    $GEMDATA/nwx
>   setenv AFOS_BITMAPS  $NAWIPS/nprogs/afos/bitmaps
>   setenv AFOS_DATA     $NAWIPS/tmp
>   setenv AFOS_LOG      $NAWIPS/tmp
>   setenv AFOS_BIN      $NAWIPS/tmp
>   setenv AFOS_ALARMS   $NAWIPS/tmp
>#
>#  Location of NSAT directory tree "Required!!"...must exist
>#
>   setenv SAT                  $GEMDATA/images/sat
>#
>#
># Below follow  variables for data locations (site specific)
># Not required for NAWIPS, but may be used in scripts etc.
>#
>   setenv LDMDATA      /var/data/ldm
>   setenv GOES8                $SAT/GOES-8
>   setenv GOES9                $SAT/GOES-9
>   setenv HDS           $GEMDATA/hds
>   setenv SAO          $GEMDATA/surface
>   setenv UPA          $GEMDATA/upperair
>   setenv RAW_SAO       $LDMDATA/surface/sao
>   setenv RAW_SYN       $LDMDATA/surface/syn
>   setenv RAW_UPA       $LDMDATA/upperair
>   setenv NIDS          $GEMDATA/images/radar/nids/FTG
>   setenv NLDN          $GEMDATA/nldn
>
>   setenv ZONEMAPS      $GEMPAKHOME/maps/bna
>   setenv TORN_WARN     $TEXT_DATA/watch_warn/torn_warn
>   setenv TSTRM_WARN    $TEXT_DATA/watch_warn/tstrm_warn
>
>   
>
>--------------A5916DD293A7223A0449CAB0--
>