Interesting. I prefer using Scientific Linux but install used Centos since
it was the recommended OS. I'm not adverse to installing again. since I've
already installed the OS three time now. First I tried installing Cave in a
64 bit version of Centos 5 and yum installed both the 32 and 64 bit version
of java rendering alertviz and cave brain dead. I then installed the 32bit
version so I can install the EDEX and CAVE together. Then reinstalled again
think that gnome had gotten corrupted but the same thing happened on the
latest install. I'll try rolling back the lib file you mentioned and see if
that changes anything.
Steven Boring
Network & Computer Services
College of Science
San Jose State University
408-924-5274
On Tue, Oct 22, 2013 at 11:34 AM, Michael Sabino <michael.r.sabino@xxxxxxxxx
> wrote:
> I had the same issue on CentOS 5.9. Downgrading my libgnomevfs-2.so to
> the older version in the repos fixed some of the issue (with browsing
> gnome vfs directory structures), but there was still an issue with
> libxslt/firefox, where firefox would close upon opening and visiting a
> website.
>
> Scientific Linux v. 5.9 (based on RHEL, just like CentOS) does not
> have these issues, and I have noticed that after reinstalling to
> Scientific Linux and making a small modification in a script file for
> setting up the Java environment (I had to remove a debug string), that
> I no longer have any issues (even with Edex, which initially would not
> start edexRequest).
>
> I am not telling you this as a suggestion that you reinstall, rather
> to provide information on how events transpired for me.
>
> I believe the modification I had to make was in
> /awips2/edex/bin/wrapper.conf, where I removed a debug log string
> (which was evident from the error messages I was receiving when
> starting edex, a no class def found error applicable only to when that
> debug setting was set in the conf file). After I made that
> modification, EdexRequest started successfully.
>
> Thanks,
>
> Michael Sabino
>
> On 10/22/13, Steven Boring <steven.boring@xxxxxxxx> wrote:
> > Thanks for your replies
> > I'm running EDEX/CAVE system on a system running Centos 5.9 32bit as
> > recommended. The video card is an older ATI Radeon HD4350. I've installed
> > ATI linux driver 10.10. ATI catalist 13.1 is the latest driver but I
> > wasn't sure if it would be compatible with the older version of Linux. I
> > have tried deleting the caveData folder with no change.
> >
> > Here the output of the glxgears command
> > glxgears -info
> > GL_RENDERER = Mesa X11
> > GL_VERSION = 2.1 Mesa 7.8.2
> > GL_VENDOR = Brian Paul
> > GL_EXTENSIONS = GL_ARB_copy_buffer GL_ARB_depth_texture
> GL_ARB_depth_clamp
> > GL_ARB_draw_buffers GL_ARB_draw_elements_base_vertex
> > GL_ARB_fragment_coord_conventions GL_ARB_fragment_program
> > GL_ARB_fragment_program_shadow GL_ARB_fragment_shader
> > GL_ARB_framebuffer_object GL_ARB_half_float_pixel
> GL_ARB_half_float_vertex
> > GL_ARB_imaging GL_ARB_map_buffer_range GL_ARB_multisample
> > GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_pixel_buffer_object
> > GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_provoking_vertex
> > GL_ARB_shader_objects GL_ARB_shading_language_100
> > GL_ARB_shading_language_120 GL_ARB_shadow GL_ARB_shadow_ambient
> GL_ARB_sync
> > GL_ARB_texture_border_clamp GL_ARB_texture_compression
> > GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine
> > GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3
> > GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two
> > GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_array_bgra
> > GL_ARB_vertex_array_object GL_ARB_vertex_buffer_object
> > GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_EXT_abgr
> > GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate
> > GL_EXT_blend_func_separate GL_EXT_blend_logic_op GL_EXT_blend_minmax
> > GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_convolution
> > GL_EXT_copy_texture GL_EXT_depth_bounds_test GL_EXT_draw_buffers2
> > GL_EXT_draw_range_elements GL_EXT_framebuffer_blit
> > GL_EXT_framebuffer_multisample GL_EXT_framebuffer_object GL_EXT_fog_coord
> > GL_EXT_gpu_program_parameters GL_EXT_histogram GL_EXT_multi_draw_arrays
> > GL_EXT_packed_depth_stencil GL_EXT_packed_pixels GL_EXT_paletted_texture
> > GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_polygon_offset
> > GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color
> > GL_EXT_separate_specular_color GL_EXT_shadow_funcs
> > GL_EXT_shared_texture_palette GL_EXT_stencil_two_side GL_EXT_stencil_wrap
> > GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_array
> > GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_add
> > GL_EXT_texture_env_combine GL_EXT_texture_env_dot3
> GL_EXT_texture_lod_bias
> > GL_EXT_texture_mirror_clamp GL_EXT_texture_object
> GL_EXT_texture_rectangle
> > GL_EXT_texture_sRGB GL_EXT_texture_swizzle GL_EXT_timer_query
> > GL_EXT_vertex_array GL_EXT_vertex_array_bgra
> > GL_3DFX_texture_compression_FXT1 GL_APPLE_packed_pixels
> > GL_APPLE_vertex_array_object GL_APPLE_object_purgeable
> > GL_ATI_blend_equation_separate GL_ATI_envmap_bumpmap
> > GL_ATI_texture_env_combine3 GL_ATI_texture_mirror_once
> > GL_ATI_fragment_shader GL_ATI_separate_stencil
> GL_IBM_multimode_draw_arrays
> > GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat
> > GL_INGR_blend_func_separate GL_MESA_pack_invert GL_MESA_resize_buffers
> > GL_MESA_texture_array GL_MESA_ycbcr_texture GL_MESA_window_pos
> > GL_NV_blend_square GL_NV_conditional_render GL_NV_depth_clamp
> > GL_NV_fragment_program GL_NV_fragment_program_option
> > GL_NV_light_max_exponent GL_NV_packed_depth_stencil GL_NV_point_sprite
> > GL_NV_texture_env_combine4 GL_NV_texture_rectangle
> GL_NV_texgen_reflection
> > GL_NV_vertex_program GL_NV_vertex_program1_1 GL_OES_read_format
> > GL_SGI_color_matrix GL_SGI_color_table GL_SGI_texture_color_table
> > GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp
> > GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays
> > 409 frames in 5.0 seconds = 81.799 FPS
> > 408 frames in 5.0 seconds = 81.577 FPS
> >
> > I figure the problem may be with missing and/or incompatible lib files or
> > video drivers.
> > Since I had to add symlinks for libGL.so.1 and libXp.so.6 What openGL
> > packages do you have installed.
> >
> > As a side note: Ever since I installed the server/cave software gnome
> > programs like gedit and firefox no longer open and my background changed
> to
> > black. the gnome system admin tools also seemed to stop, i.e screensave
> > utility, users/groups ...
> >
> >
> > Steven Boring
> >
> > Network & Computer Services
> > College of Science
> > San Jose State University
> > 408-924-5274
> >
> >
> > On Tue, Oct 22, 2013 at 9:37 AM, Michael James
> > <mjames@xxxxxxxxxxxxxxxx>wrote:
> >
> >> I agree with Michael here, a lot of CAVE errors are fixed by "rm -rf
> >> ~/caveData" and then starting alertviz/CAVE again (you have to enter
> >> localhost/OAX again when you do this).
> >>
> >> If the problem persists when caveData is removed then I would guess it's
> >> due to an incompatible graphics driver. You want to be sure you have
> the
> >> latest linux driver for your card, we've run into problems at Unidata
> >> with
> >> old drivers causing "paint errors" and such in CAVE.
> >>
> >> -mj
> >>
> >> On 10/22/2013 10:34 AM, Michael Sabino wrote:
> >>
> >>> ---------- Forwarded message ----------
> >>> From: Michael
> >>> Sabino<michael.r.sabino@gmail.**com<michael.r.sabino@xxxxxxxxx>
> >>> >
> >>> Date: Tue, 22 Oct 2013 11:12:27 -0500
> >>> Subject: Re: [awips2-users] awips2
> >>> To: Steven Boring<steven.boring@xxxxxxxx>
> >>>
> >>> Hi,
> >>>
> >>> I have a couple ideas for getting AWIPS2 working on your system.
> >>>
> >>> First, check that you have a basemaps/MTR.spi in your /awips2 directory
> >>> tree.
> >>>
> >>> Secondly, delete $HOME/caveData, and try connecting to edex again.
> >>>
> >>> I have seen the Initializing... error before. I don't remember exactly
> >>> how I corrected it, but I believe it involved deleting the caveData
> >>> directory.
> >>>
> >>> Also, what operating system are you running this on? CAVE and edex
> >>> often require tweaking to get working on different OS.
> >>>
> >>> Thirdly, what version of OpenGL are you using? I am using the NVidia
> >>> version, so we may differ quite a bit in that regard. "file
> >>> /usr/lib/libGL.so.1".
> >>>
> >>> Fourthly, try running "glxgears -info" to verify your direct rendering
> >>> functionality (CAVE requires direct rendering).
> >>>
> >>> Thanks, and hopeful my suggestions will help,
> >>>
> >>> Michael Sabino
> >>>
> >>> On 10/22/13, Steven Boring<steven.boring@xxxxxxxx> wrote:
> >>>
> >>>
> >>>> Hi All,
> >>>> I'm help a faculty member here at SJSU install and get the awips2
> >>>> system
> >>>> on
> >>>> one of our servers.. Initially I installed just the client becuase the
> >>>> processor thought we would be able to connect to a server at unidata.
> >>>> But
> >>>> we were told we needed to run our own server. I then installed the
> >>>> server
> >>>> software but when I tried to run the alertvix.sh I got an endless
> >>>> series
> >>>> of
> >>>> java error screen, close one another would replace it. I figured that
> >>>> installing the server software after installing the client corrupted
> >>>> the
> >>>> client software I removed everything and started over. Now I have both
> >>>> the
> >>>> server and client installed on the server. I think the EDEX server is
> >>>> working at least I see activity in all the logs similar to that listed
> >>>> in
> >>>> the installation guide with the exception of the ldm log is empty but
> >>>> the
> >>>> ldm log entries are showing up in the /var/log/messages files. The
> >>>> alertviz.sh is now running but I initialy had problems getting the
> cave
> >>>> software to run. I kept seeing segmentation fault reports refering to
> >>>> libXp.so.6 and libGL.so.1. After add two symlinks to /awips2/tools/lib
> >>>> pointing to the correct lib files in the /awips2/ directory tree.
> Cave
> >>>> now
> >>>> loads but If I do anything in the client I either errors and/or CAVE
> >>>> segmentation faults and quits..
> >>>>
> >>>> Here's an example of some of the errors.
> >>>>
> >>>> clicked on Obs/surface plot
> >>>>
> >>>> Alertviz error
> >>>> 07:06 PM (1)| WORKSTATION | WORKSTATION: An internal error occured
> >>>> during:
> >>>> "Initiallizing..."
> >>>>
> >>>> An internal error occurred during:
> >>>> "Initializing...".java.lang.**RuntimeException: Could not load file:
> >>>> basemaps/MTR.spi
> >>>> at
> >>>>
> com.raytheon.viz.pointdata.**StaticPlotInfoPV.**readStaticPlotInfoPV(**
> >>>> StaticPlotInfoPV.java:120)
> >>>> at
> >>>>
> com.raytheon.viz.pointdata.**StaticPlotInfoPV.**readStaticPlotInfoPV(**
> >>>> StaticPlotInfoPV.java:106)
> >>>> at
> >>>>
> com.raytheon.viz.pointdata.**rsc.progdisc.**SpiProgDisclosure.<init>(**
> >>>> SpiProgDisclosure.java:51)
> >>>> at
> >>>> com.raytheon.viz.pointdata.**rsc.PlotResource2.**
> >>>> initInternal(PlotResource2.**java:266)
> >>>> at
> >>>> com.raytheon.uf.viz.core.rsc.**AbstractVizResource.init(**
> >>>> AbstractVizResource.java:329)
> >>>> at
> >>>> com.raytheon.viz.pointdata.**rsc.PlotBlendedResource.**initInternal(**
> >>>> PlotBlendedResource.java:87)
> >>>> at
> >>>> com.raytheon.uf.viz.core.rsc.**AbstractVizResource.init(**
> >>>> AbstractVizResource.java:329)
> >>>> at
> >>>> com.raytheon.uf.viz.core.rsc.**AbstractVizResource$InitJob.**
> >>>> run(AbstractVizResource.java:**418)
> >>>> at org.eclipse.core.internal.**jobs.Worker.run(Worker.java:**54)
> >>>>
> >>>> clicked Obs/METAR Station plot
> >>>> 07:14 PM (1) | WORKSTATION | CAVE: Paint error: Could not find spi
> >>>> file::
> >>>> The resource has been disabled.
> >>>>
> >>>> Paint error: Could not find spi file:: The resource has been
> >>>> disabled.com.raytheon.uf.viz.**core.exception.VizException: Paint
> >>>> error:
> >>>> Could not find spi file:: The resource has been disabled.
> >>>> at
> >>>> com.raytheon.uf.viz.core.maps.**display.MapRenderableDisplay.**
> >>>> paint(MapRenderableDisplay.**java:178)
> >>>> at
> >>>> com.raytheon.uf.viz.d2d.core.**map.D2DMapRenderableDisplay.**
> >>>> paint(D2DMapRenderableDisplay.**java:231)
> >>>> at
> >>>> com.raytheon.viz.ui.panes.**VizDisplayPane.glDrawInternal(**
> >>>> VizDisplayPane.java:515)
> >>>> at
> >>>> com.raytheon.viz.ui.panes.**VizDisplayPane.draw(**
> >>>> VizDisplayPane.java:469)
> >>>> at
> >>>> com.raytheon.viz.ui.panes.**DrawCoordinatedPane.draw(**
> >>>> DrawCoordinatedPane.java:182)
> >>>> at
> >>>> com.raytheon.viz.ui.panes.**DrawCoordinatorJob$1.run(**
> >>>> DrawCoordinatorJob.java:229)
> >>>> at
> >>>> org.eclipse.ui.internal.**UILockListener.doPendingWork(**
> >>>> UILockListener.java:164)
> >>>> at
> >>>> org.eclipse.ui.internal.**UISynchronizer$3.run(**
> >>>> UISynchronizer.java:158)
> >>>> at org.eclipse.swt.widgets.**RunnableLock.run(RunnableLock.**
> >>>> java:35)
> >>>> at
> >>>> org.eclipse.swt.widgets.**Synchronizer.runAsyncMessages(**
> >>>> Synchronizer.java:134)
> >>>> at org.eclipse.swt.widgets.**Display.runAsyncMessages(**
> >>>> Display.java:3515)
> >>>> at org.eclipse.swt.widgets.**Display.readAndDispatch(**
> >>>> Display.java:3164)
> >>>> at org.eclipse.ui.internal.**Workbench.runEventLoop(**
> >>>> Workbench.java:2640)
> >>>> at
> >>>> org.eclipse.ui.internal.**Workbench.runUI(Workbench.**java:2604)
> >>>> at org.eclipse.ui.internal.**Workbench.access$4(Workbench.**
> >>>> java:2438)
> >>>> at
> org.eclipse.ui.internal.**Workbench$7.run(Workbench.**java:671)
> >>>> at
> >>>> org.eclipse.core.databinding.**observable.Realm.**
> >>>> runWithDefault(Realm.java:332)
> >>>> at
> >>>> org.eclipse.ui.internal.**Workbench.**createAndRunWorkbench(**
> >>>> Workbench.java:664)
> >>>> at org.eclipse.ui.PlatformUI.**createAndRunWorkbench(**
> >>>> PlatformUI.java:149)
> >>>> at
> >>>> com.raytheon.viz.ui.**personalities.awips.**AbstractCAVEComponent.**
> >>>> startComponent(**AbstractCAVEComponent.java:**219)
> >>>> at
> >>>> com.raytheon.uf.viz.**application.VizApplication.**
> >>>> start(VizApplication.java:81)
> >>>> at
> >>>> org.eclipse.equinox.internal.**app.EclipseAppHandle.run(**
> >>>> EclipseAppHandle.java:196)
> >>>> at
> >>>> org.eclipse.core.runtime.**internal.adaptor.**EclipseAppLauncher.**
> >>>> runApplication(**EclipseAppLauncher.java:110)
> >>>> at
> >>>>
> org.eclipse.core.runtime.**internal.adaptor.**EclipseAppLauncher.start(*
> >>>> *EclipseAppLauncher.java:79)
> >>>> at
> >>>> org.eclipse.core.runtime.**adaptor.EclipseStarter.run(**
> >>>> EclipseStarter.java:369)
> >>>> at
> >>>> org.eclipse.core.runtime.**adaptor.EclipseStarter.run(**
> >>>> EclipseStarter.java:179)
> >>>> at sun.reflect.**NativeMethodAccessorImpl.**invoke0(Native
> Method)
> >>>> at
> >>>> sun.reflect.**NativeMethodAccessorImpl.**invoke(**
> >>>> NativeMethodAccessorImpl.java:**39)
> >>>> at
> >>>> sun.reflect.**DelegatingMethodAccessorImpl.**invoke(**
> >>>> DelegatingMethodAccessorImpl.**java:25)
> >>>> at java.lang.reflect.Method.**invoke(Method.java:597)
> >>>> at org.eclipse.equinox.launcher.**Main.invokeFramework(Main.**
> >>>> java:619)
> >>>> at org.eclipse.equinox.launcher.**Main.basicRun(Main.java:574)
> >>>> at org.eclipse.equinox.launcher.**Main.run(Main.java:1407)
> >>>> Caused by: com.raytheon.uf.viz.core.**exception.VizException: Could
> not
> >>>> find
> >>>> spi file
> >>>> at com.raytheon.viz.spi.**SPIResource.initInternal(**
> >>>> SPIResource.java:114)
> >>>> at
> >>>> com.raytheon.uf.viz.core.rsc.**AbstractVizResource.init(**
> >>>> AbstractVizResource.java:329)
> >>>> at
> >>>> com.raytheon.uf.viz.core.rsc.**AbstractVizResource$InitJob.**
> >>>> run(AbstractVizResource.java:**418)
> >>>> at org.eclipse.core.internal.**jobs.Worker.run(Worker.java:**54)
> >>>> Caused by: java.io.FileNotFoundException: basemaps/MTR.spi
> >>>> at com.raytheon.viz.spi.**SPIResource.initInternal(**
> >>>> SPIResource.java:115)
> >>>> ... 3 more
> >>>>
> >>>> 07:14 PM (1)| WORKSTATION | WORKSTATION: An internal error occured
> >>>> during:
> >>>> "Initiallizing..."
> >>>>
> >>>> An internal error occurred during:
> >>>> "Initializing...".java.lang.**RuntimeException: Could not load file:
> >>>> basemaps/MTR.spi
> >>>> at
> >>>>
> com.raytheon.viz.pointdata.**StaticPlotInfoPV.**readStaticPlotInfoPV(**
> >>>> StaticPlotInfoPV.java:120)
> >>>> at
> >>>>
> com.raytheon.viz.pointdata.**StaticPlotInfoPV.**readStaticPlotInfoPV(**
> >>>> StaticPlotInfoPV.java:106)
> >>>> at
> >>>>
> com.raytheon.viz.pointdata.**rsc.progdisc.**SpiProgDisclosure.<init>(**
> >>>> SpiProgDisclosure.java:51)
> >>>> at
> >>>> com.raytheon.viz.pointdata.**rsc.PlotResource2.**
> >>>> initInternal(PlotResource2.**java:266)
> >>>> at
> >>>> com.raytheon.uf.viz.core.rsc.**AbstractVizResource.init(**
> >>>> AbstractVizResource.java:329)
> >>>> at
> >>>> com.raytheon.uf.viz.core.rsc.**AbstractVizResource$InitJob.**
> >>>> run(AbstractVizResource.java:**418)
> >>>> at org.eclipse.core.internal.**jobs.Worker.run(Worker.java:**54)
> >>>>
> >>>> 12:21
> >>>> Clicked Obs/synoptic station plot
> >>>> Segmentation fault /awips/cave/cave.sh
> >>>>
> >>>> 12:25
> >>>> CLicked volume 500 height
> >>>>
> >>>> No data available for resource
> >>>> com.raytheon.viz.grid.rsc.**GridResourceDatacom.raytheon.**
> >>>> uf.viz.core.exception.**NoDataAvailableException:
> >>>> No Data Available
> >>>> at
> >>>> com.raytheon.uf.viz.core.rsc.**AbstractRequestableResourceDat**
> >>>> a.construct(**AbstractRequestableResourceDat**a.java:227)
> >>>> at
> >>>> com.raytheon.viz.grid.rsc.**GridResourceData.construct(**
> >>>> GridResourceData.java:116)
> >>>> at
> >>>>
> com.raytheon.uf.viz.core.**drawables.ResourcePair.**instantiateResource(
> >>>> **ResourcePair.java:244)
> >>>> at
> >>>> com.raytheon.uf.viz.core.rsc.**ResourceList.**instantiateResources(**
> >>>> ResourceList.java:890)
> >>>> at
> >>>> com.raytheon.viz.ui.**BundleLoader$**InstantiationTask.run(**
> >>>> BundleLoader.java:85)
> >>>> at java.lang.Thread.run(Thread.**java:662)
> >>>> at
> >>>> com.raytheon.viz.ui.**BundleLoader.**loadBundleToContainer(**
> >>>> BundleLoader.java:174)
> >>>> at
> com.raytheon.viz.ui.**BundleLoader.run(BundleLoader.**java:116)
> >>>> at org.eclipse.core.internal.**jobs.Worker.run(Worker.java:**54)
> >>>>
> >>>> d2dContourStyleRules.xml: unexpected element (uri:"", local:"range").
> >>>> Expected elements are
> >>>>
> <{}displayFlags>,<{}**positiveLinePattern>,<{}**negativeLinePattern>,<{}
> >>>> **displayUnits>,<{}**contourLabeling>,<{}**smoothingDistance>
> >>>> on line 369 column 28
> >>>>
> >>>> When I try to view any satelite or radar images CAVE cratshes with a
> >>>> segmentation fault and no errors.
> >>>>
> >>>> Any help would be appreciated
> >>>>
> >>>> Steven Boring
> >>>>
> >>>> Network& Computer Services
> >>>> College of Science
> >>>> San Jose State University
> >>>> 408-924-5274
> >>>>
> >>>>
> >>>>
> >>> ______________________________**_________________
> >>> awips2-users mailing list
> >>> awips2-users@xxxxxxxxxxxxxxxx
> >>> For list information, to unsubscribe, or change your membership
> options,
> >>> visit:
> >>> http://www.unidata.ucar.edu/**mailing_lists/<
> http://www.unidata.ucar.edu/mailing_lists/>
> >>>
> >>>
> >>
> >> ______________________________**_________________
> >> awips2-users mailing list
> >> awips2-users@xxxxxxxxxxxxxxxx
> >> For list information, to unsubscribe, or change your membership options,
> >> visit:
> >> http://www.unidata.ucar.edu/**mailing_lists/<
> http://www.unidata.ucar.edu/mailing_lists/>
> >>
> >
>
