[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
Re: Problem with netCDF on HPUX 10.20 and cc
- Subject: Re: Problem with netCDF on HPUX 10.20 and cc
- Date: Wed, 24 Jun 1998 09:43:53 -0600
Markus,
>Date: Wed, 24 Jun 1998 14:45:28 +0200
>From: Markus Werle <address@hidden>
>Organization: .
>To: address@hidden,
>To: address@hidden
>Subject: Problem with netCDF on HPUX 10.20 and cc
>Keywords: 199806241439.IAA10195
In the above message, you wrote:
> This is a problem I have with netCDF 3.3.1 on HPUX 10.20:
> I managed to compile the whole stuff with gcc and g++, but ran into
> problems when using cc and CC later in my own project
> (linker complains about unresolved symbols).
>
> So I tried to recompile netCDF with cc and CC and got some strange results.
>
> configure runs through - no problem.
>
> Here is my configuration (tcsh):
>
> setenv CPPFLAGS -v
> setenv CC /bin/cc
> setenv CFLAGS "+DA1.1 -D_INCLUDE_POSIX_SOURCE -Aa"
> setenv FC /opt/fortran/bin/f77
> setenv FFLAGS "-w +DAportable"
> setenv CXX /bin/CC
> setenv CXXFLAGS "-Aa -D_INCLUDE_POSIX_SOURCE"
>
> [markus@landau] ...netcdf-3.3.1/src > configure
> loading cache ./config.cache
> checking for m4... (cached) m4
The above does not follow the recomended settings in the INSTALL file
for HP-UX B.10.20. Did you try the recommended settings and did they
not work?
If you didn't try the recommended settings and now wish to, then do the
following:
1. Go to the top-level source directory.
2. Execute the command "make distclean". Do not worry if it fails
or even fails to execute.
3. Remove the file "config.cache" if it exists.
4. Set your environment variables according to the recommended
settings for HP-UX B10.20 in the INSTALL file (search for HP-UX).
5. Execute the configure script. Redirect standard output and
standard error to the file "configure.log". If an error message
appears in the output, then stop and send me the file.
6. Execute the command "make". Redirect standard output and
standard error to the file "make.log". If an error occurs, then
stop and send me the file and the file from step 5.
7. Execute the command "test". Redirect standard output and
standard error to the file "test.log". If an error occurs, then
stop and send me the file and the files from steps 6 and 5.
8. Execute the command "install". Redirect standard output and
standard error to the file "install.log". If an error occurs,
then stop and send me the file and the files from steps 7, 6,
and 5.
9. Execute the command "make clean".
I've included the rest of your message for completeness in our tracking
system.
Please let me know if this helps.
>
> [...]
>
> [markus@landau] ...netcdf-3.3.1/src > make
>
> Making `all' in directory /home/markus/SOFTWARE/netCDF/netcdf-3.3.1/src/libsrc
>
> /bin/cc -c +DA1.1 -D_INCLUDE_POSIX_SOURCE -Aa -I. -v attr.c
> cc: CCOPTS is not set.
> /opt/langtools/lbin/cpp.ansi attr.c /var/tmp/ctmAAAa28902 -D__hp9000s700
> -D__hp9000s800 -D__hppa -D__hpux -D__unix -D_INCLUDE_POSIX_SOURCE -I.
> -D_PA_RISC1_1
> cc: Entering Preprocessor.
> /opt/ansic/lbin/ccom /var/tmp/ctmAAAa28902 attr.o -DA1.1
> -Oq00,al,ag,cn,Lm,sz,Ic,vo,lc,mf,Po,es,rs,sp,in,vc,pi,fa,pe,Rr,Fl,pv,pa,nf,cp,lx,st,ap,Pg,ug,lu,dp,fs,bp,wp!
> -Aa
> cc: "/usr/include/stddef.h", line 26: error 1642: Duplicate type specifier
> "int": ignored.
> cc: "/usr/include/stddef.h", line 26: warning 554: Declarator is missing.
> *** Error exit code 1
>
> Stop.
> *** Error exit code 1
>
> Stop.
> *** Error exit code 1
>
> Stop.
> [markus@landau] ...netcdf-3.3.1/src >
>
> ---------------------------------------------------
>
> Anyone there with an idea?
> See my attachments especially /usr/include/stddef.h
> for which I found an explanation, but could not figure out how
> to fix this (is int already redefined by typedef?):
> [switching off -D_INCLUDE_POSIX_SOURCE makes things even worse]
>
> >From HPUX C-Manual:
> -------------------
> Typedefs
>
> The HP C compiler does not allow combining type specifiers with typedef
> names. For example:
>
> typedef long t;
> unsigned t var;
>
> Compilers derived from pcc accept this code, but HP C does not. Change
> the typedef to include the type specifier:
>
> typedef unsigned long t;
> t var;
>
> or use a define:
>
> #define t long
> unsigned t var;
>
> ================================================================================
>
> Thanks,
>
>
> Markus
>
> --------------0462A2C8C0D7A62E6777255B
> Content-Type: text/plain; charset=us-ascii; name="config.status"
> Content-Transfer-Encoding: 7bit
> Content-Disposition: inline; filename="config.status"
>
> #! /bin/sh
> # Generated automatically by configure.
> # Run this file to recreate the current configuration.
> # This directory was configured as follows,
> # on host landau:
> #
> # configure
> #
> # Compiler output produced by configure, useful for debugging
> # configure, is in ./config.log if it exists.
>
> ac_cs_usage="Usage: ./config.status [--recheck] [--version] [--help]"
> for ac_option
> do
> case "$ac_option" in
> -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
> echo "running ${CONFIG_SHELL-/bin/sh} configure --no-create
> --no-recursion"
> exec ${CONFIG_SHELL-/bin/sh} configure --no-create --no-recursion ;;
> -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
> echo "./config.status generated by autoconf version 2.9"
> exit 0 ;;
> -help | --help | --hel | --he | --h)
> echo "$ac_cs_usage"; exit 0 ;;
> *) echo "$ac_cs_usage"; exit 1 ;;
> esac
> done
>
> ac_given_srcdir=.
>
> trap 'rm -fr macros.make libsrc/ncconfig.h conftest*; exit 1' 1 2 15
>
> # Protect against being on the right side of a sed subst in config.status.
> sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\&%]/\\&/g;
> s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF
> /^[ ]*VPATH[ ]*=[^:]*$/d
>
> s%@CFLAGS@%+DA1.1 -D_INCLUDE_POSIX_SOURCE -Aa%g
> s%@CPPFLAGS@%-v%g
> s%@CXXFLAGS@%-Aa -D_INCLUDE_POSIX_SOURCE%g
> s%@DEFS@%-DHAVE_CONFIG_H%g
> s%@LDFLAGS@%%g
> s%@LIBS@%%g
> s%@exec_prefix@%${prefix}%g
> s%@prefix@%/home/markus/SOFTWARE/netCDF/netcdf-3.3.1%g
> s%@program_transform_name@%s,x,x,%g
> s%@bindir@%${exec_prefix}/bin%g
> s%@sbindir@%${exec_prefix}/sbin%g
> s%@libexecdir@%${exec_prefix}/libexec%g
> s%@datadir@%${prefix}/share%g
> s%@sysconfdir@%${prefix}/etc%g
> s%@sharedstatedir@%${prefix}/com%g
> s%@localstatedir@%${prefix}/var%g
> s%@libdir@%${exec_prefix}/lib%g
> s%@includedir@%${prefix}/include%g
> s%@oldincludedir@%/usr/include%g
> s%@infodir@%${prefix}/info%g
> s%@mandir@%${prefix}/man%g
> s%@M4@%m4%g
> s%@CC@%/bin/cc%g
> s%@CC_MAKEDEPEND@%false%g
> s%@CXX@%/bin/CC%g
> s%@FC@%/opt/fortran/bin/f77%g
> s%@FFLAGS@%-w +DAportable%g
> s%@FLIBS@% -lU77%g
> s%@CPP@%/lib/cpp%g
> s%@FPP@%%g
> s%@COMPILE_F@%$(COMPILE.f) $(FPPFLAGS)%g
> s%@FPPFLAGS@%%g
> s%@MATHLIB@%-lm%g
> s%@AR@%ar%g
> s%@RANLIB@%ranlib%g
> s%@prog@%%g
> s%@WHATIS@%whatis%g
> s%@MAKEWHATIS_CMD@%%g
> s%@FTPBINDIR@%/home/ftp/pub/binary/dummy_system%g
>
> CEOF
>
> CONFIG_FILES=${CONFIG_FILES-"macros.make"}
> for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
> # Support "outfile[:infile]", defaulting infile="outfile.in".
> case "$ac_file" in
> *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
> ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
> *) ac_file_in="${ac_file}.in" ;;
> esac
>
> # Adjust relative srcdir, etc. for subdirectories.
>
> # Remove last slash and all that follows it. Not all systems have dirname.
> ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
> if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
> # The file is in a subdirectory.
> test ! -d "$ac_dir" && mkdir "$ac_dir"
> ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
> # A "../" for each directory in $ac_dir_suffix.
> ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
> else
> ac_dir_suffix= ac_dots=
> fi
>
> case "$ac_given_srcdir" in
> .) srcdir=.
> if test -z "$ac_dots"; then top_srcdir=.
> else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
> /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir"
> ;;
> *) # Relative path.
> srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
> top_srcdir="$ac_dots$ac_given_srcdir" ;;
> esac
>
> echo creating "$ac_file"
> rm -f "$ac_file"
> configure_input="Generated automatically from `echo $ac_file_in|sed
> 's%.*/%%'` by configure."
> case "$ac_file" in
> *Makefile*) ac_comsub="1i\\
> # $configure_input" ;;
> *) ac_comsub= ;;
> esac
> sed -e "$ac_comsub
> s%@configure_input@%$configure_input%g
> s%@srcdir@%$srcdir%g
> s%@top_srcdir@%$top_srcdir%g
> " -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
> fi; done
> rm -f conftest.subs
>
> # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
> # NAME is the cpp macro being defined and VALUE is the value it is being
> given.
> #
> # ac_d sets the value in "#define NAME VALUE" lines.
> ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
> ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
> ac_dC='\3'
> ac_dD='%g'
> # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
> ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
> ac_uB='\([ ]\)%\1#\2define\3'
> ac_uC=' '
> ac_uD='\4%g'
> # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
> ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
> ac_eB='$%\1#\2define\3'
> ac_eC=' '
> ac_eD='%g'
>
> UDCONFIG_HEADERS=${UDCONFIG_HEADERS-"fortran/nfconfig.inc:fortran/nfconfig.in
> "}
> for ac_file in .. $UDCONFIG_HEADERS; do if test "x$ac_file" != x..; then
> # Support "outfile[:infile]", defaulting infile="outfile.in".
> case "$ac_file" in
> *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
> ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
> *) ac_file_in="${ac_file}.in" ;;
> esac
>
> echo udcreating $ac_file
>
> rm -f conftest.frag conftest.in conftest.out
> cp $ac_given_srcdir/$ac_file_in conftest.in
>
> cat > conftest.frag <<CEOF
> ${ac_dA}NF_INT1_T${ac_dB}NF_INT1_T${ac_dC}byte${ac_dD}
> ${ac_uA}NF_INT1_T${ac_uB}NF_INT1_T${ac_uC}byte${ac_uD}
> ${ac_eA}NF_INT1_T${ac_eB}NF_INT1_T${ac_eC}byte${ac_eD}
> ${ac_dA}NF_INT2_T${ac_dB}NF_INT2_T${ac_dC}integer*2${ac_dD}
> ${ac_uA}NF_INT2_T${ac_uB}NF_INT2_T${ac_uC}integer*2${ac_uD}
> ${ac_eA}NF_INT2_T${ac_eB}NF_INT2_T${ac_eC}integer*2${ac_eD}
> ${ac_dA}NF_INT1_IS_C_SIGNED_CHAR${ac_dB}NF_INT1_IS_C_SIGNED_CHAR${ac_dC}1${ac_dD}
> ${ac_uA}NF_INT1_IS_C_SIGNED_CHAR${ac_uB}NF_INT1_IS_C_SIGNED_CHAR${ac_uC}1${ac_uD}
> ${ac_eA}NF_INT1_IS_C_SIGNED_CHAR${ac_eB}NF_INT1_IS_C_SIGNED_CHAR${ac_eC}1${ac_eD}
> ${ac_dA}NF_INT2_IS_C_SHORT${ac_dB}NF_INT2_IS_C_SHORT${ac_dC}1${ac_dD}
> ${ac_uA}NF_INT2_IS_C_SHORT${ac_uB}NF_INT2_IS_C_SHORT${ac_uC}1${ac_uD}
> ${ac_eA}NF_INT2_IS_C_SHORT${ac_eB}NF_INT2_IS_C_SHORT${ac_eC}1${ac_eD}
> CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> cat > conftest.frag <<CEOF
> ${ac_dA}NF_INT_IS_C_INT${ac_dB}NF_INT_IS_C_INT${ac_dC}1${ac_dD}
> ${ac_uA}NF_INT_IS_C_INT${ac_uB}NF_INT_IS_C_INT${ac_uC}1${ac_uD}
> ${ac_eA}NF_INT_IS_C_INT${ac_eB}NF_INT_IS_C_INT${ac_eC}1${ac_eD}
> ${ac_dA}NF_REAL_IS_C_FLOAT${ac_dB}NF_REAL_IS_C_FLOAT${ac_dC}1${ac_dD}
> ${ac_uA}NF_REAL_IS_C_FLOAT${ac_uB}NF_REAL_IS_C_FLOAT${ac_uC}1${ac_uD}
> ${ac_eA}NF_REAL_IS_C_FLOAT${ac_eB}NF_REAL_IS_C_FLOAT${ac_eC}1${ac_eD}
> ${ac_dA}NF_DOUBLEPRECISION_IS_C_DOUBLE${ac_dB}NF_DOUBLEPRECISION_IS_C_DOUBLE${ac_dC}1${ac_dD}
> ${ac_uA}NF_DOUBLEPRECISION_IS_C_DOUBLE${ac_uB}NF_DOUBLEPRECISION_IS_C_DOUBLE${ac_uC}1${ac_uD}
> ${ac_eA}NF_DOUBLEPRECISION_IS_C_DOUBLE${ac_eB}NF_DOUBLEPRECISION_IS_C_DOUBLE${ac_eC}1${ac_eD}
> ${ac_dA}NCBYTE_T${ac_dB}NCBYTE_T${ac_dC}byte${ac_dD}
> ${ac_uA}NCBYTE_T${ac_uB}NCBYTE_T${ac_uC}byte${ac_uD}
> ${ac_eA}NCBYTE_T${ac_eB}NCBYTE_T${ac_eC}byte${ac_eD}
> CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> cat > conftest.frag <<CEOF
> ${ac_dA}NCSHORT_T${ac_dB}NCSHORT_T${ac_dC}integer*2${ac_dD}
> ${ac_uA}NCSHORT_T${ac_uB}NCSHORT_T${ac_uC}integer*2${ac_uD}
> ${ac_eA}NCSHORT_T${ac_eB}NCSHORT_T${ac_eC}integer*2${ac_eD}
> ${ac_dA}NO_STDLIB_H${ac_dB}NO_STDLIB_H${ac_dC}1${ac_dD}
> ${ac_uA}NO_STDLIB_H${ac_uB}NO_STDLIB_H${ac_uC}1${ac_uD}
> ${ac_eA}NO_STDLIB_H${ac_eB}NO_STDLIB_H${ac_eC}1${ac_eD}
> ${ac_dA}NO_SYS_TYPES_H${ac_dB}NO_SYS_TYPES_H${ac_dC}1${ac_dD}
> ${ac_uA}NO_SYS_TYPES_H${ac_uB}NO_SYS_TYPES_H${ac_uC}1${ac_uD}
> ${ac_eA}NO_SYS_TYPES_H${ac_eB}NO_SYS_TYPES_H${ac_eC}1${ac_eD}
> ${ac_dA}HAVE_FTRUNCATE${ac_dB}HAVE_FTRUNCATE${ac_dC}1${ac_dD}
> ${ac_uA}HAVE_FTRUNCATE${ac_uB}HAVE_FTRUNCATE${ac_uC}1${ac_uD}
> ${ac_eA}HAVE_FTRUNCATE${ac_eB}HAVE_FTRUNCATE${ac_eC}1${ac_eD}
> CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> cat > conftest.frag <<CEOF
> ${ac_dA}ptrdiff_t${ac_dB}ptrdiff_t${ac_dC}int${ac_dD}
> ${ac_uA}ptrdiff_t${ac_uB}ptrdiff_t${ac_uC}int${ac_uD}
> ${ac_eA}ptrdiff_t${ac_eB}ptrdiff_t${ac_eC}int${ac_eD}
> ${ac_dA}uchar${ac_dB}uchar${ac_dC}unsigned char${ac_dD}
> ${ac_uA}uchar${ac_uB}uchar${ac_uC}unsigned char${ac_uD}
> ${ac_eA}uchar${ac_eB}uchar${ac_eC}unsigned char${ac_eD}
> ${ac_dA}WORDS_BIGENDIAN${ac_dB}WORDS_BIGENDIAN${ac_dC}1${ac_dD}
> ${ac_uA}WORDS_BIGENDIAN${ac_uB}WORDS_BIGENDIAN${ac_uC}1${ac_uD}
> ${ac_eA}WORDS_BIGENDIAN${ac_eB}WORDS_BIGENDIAN${ac_eC}1${ac_eD}
> ${ac_dA}SIZEOF_SHORT${ac_dB}SIZEOF_SHORT${ac_dC}2${ac_dD}
> ${ac_uA}SIZEOF_SHORT${ac_uB}SIZEOF_SHORT${ac_uC}2${ac_uD}
> ${ac_eA}SIZEOF_SHORT${ac_eB}SIZEOF_SHORT${ac_eC}2${ac_eD}
CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> cat > conftest.frag <<CEOF
> ${ac_dA}SIZEOF_INT${ac_dB}SIZEOF_INT${ac_dC}4${ac_dD}
> ${ac_uA}SIZEOF_INT${ac_uB}SIZEOF_INT${ac_uC}4${ac_uD}
> ${ac_eA}SIZEOF_INT${ac_eB}SIZEOF_INT${ac_eC}4${ac_eD}
> ${ac_dA}SIZEOF_LONG${ac_dB}SIZEOF_LONG${ac_dC}4${ac_dD}
> ${ac_uA}SIZEOF_LONG${ac_uB}SIZEOF_LONG${ac_uC}4${ac_uD}
> ${ac_eA}SIZEOF_LONG${ac_eB}SIZEOF_LONG${ac_eC}4${ac_eD}
> ${ac_dA}SIZEOF_FLOAT${ac_dB}SIZEOF_FLOAT${ac_dC}4${ac_dD}
> ${ac_uA}SIZEOF_FLOAT${ac_uB}SIZEOF_FLOAT${ac_uC}4${ac_uD}
> ${ac_eA}SIZEOF_FLOAT${ac_eB}SIZEOF_FLOAT${ac_eC}4${ac_eD}
> ${ac_dA}SIZEOF_DOUBLE${ac_dB}SIZEOF_DOUBLE${ac_dC}8${ac_dD}
> ${ac_uA}SIZEOF_DOUBLE${ac_uB}SIZEOF_DOUBLE${ac_uC}8${ac_uD}
> ${ac_eA}SIZEOF_DOUBLE${ac_eB}SIZEOF_DOUBLE${ac_eC}8${ac_eD}
> CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> cat > conftest.frag <<CEOF
> ${ac_dA}SIZEOF_OFF_T${ac_dB}SIZEOF_OFF_T${ac_dC}0${ac_dD}
> ${ac_uA}SIZEOF_OFF_T${ac_uB}SIZEOF_OFF_T${ac_uC}0${ac_uD}
> ${ac_eA}SIZEOF_OFF_T${ac_eB}SIZEOF_OFF_T${ac_eC}0${ac_eD}
> ${ac_dA}SIZEOF_SIZE_T${ac_dB}SIZEOF_SIZE_T${ac_dC}4${ac_dD}
> ${ac_uA}SIZEOF_SIZE_T${ac_uB}SIZEOF_SIZE_T${ac_uC}4${ac_uD}
> ${ac_eA}SIZEOF_SIZE_T${ac_eB}SIZEOF_SIZE_T${ac_eC}4${ac_eD}
> CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> rm -f conftest.frag conftest.h
> case "$ac_file" in
> *.h|*.hh|*.H)
> echo "/* $ac_file. Generated automatically by configure. */" \
> > conftest.h
> ;;
> esac
> cat conftest.in >> conftest.h
> rm -f conftest.in
> if cmp -s $ac_file conftest.h 2>/dev/null; then
> echo "$ac_file is unchanged"
> rm -f conftest.h
> else
> rm -f $ac_file
> mv conftest.h $ac_file
> fi
> fi; done
>
> # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
> # NAME is the cpp macro being defined and VALUE is the value it is being
> given.
> #
> # ac_d sets the value in "#define NAME VALUE" lines.
> ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
> ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
> ac_dC='\3'
> ac_dD='%g'
> # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
> ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
> ac_uB='\([ ]\)%\1#\2define\3'
> ac_uC=' '
> ac_uD='\4%g'
> # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
> ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
> ac_eB='$%\1#\2define\3'
> ac_eC=' '
> ac_eD='%g'
>
> CONFIG_HEADERS=${CONFIG_HEADERS-"libsrc/ncconfig.h:libsrc/ncconfig.in
> "}
> for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
> # Support "outfile[:infile]", defaulting infile="outfile.in".
> case "$ac_file" in
> *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
> ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
> *) ac_file_in="${ac_file}.in" ;;
> esac
>
> echo creating $ac_file
>
> rm -f conftest.frag conftest.in conftest.out
> cp $ac_given_srcdir/$ac_file_in conftest.in
>
> cat > conftest.frag <<CEOF
> ${ac_dA}NF_INT1_T${ac_dB}NF_INT1_T${ac_dC}byte${ac_dD}
> ${ac_uA}NF_INT1_T${ac_uB}NF_INT1_T${ac_uC}byte${ac_uD}
> ${ac_eA}NF_INT1_T${ac_eB}NF_INT1_T${ac_eC}byte${ac_eD}
> ${ac_dA}NF_INT2_T${ac_dB}NF_INT2_T${ac_dC}integer*2${ac_dD}
> ${ac_uA}NF_INT2_T${ac_uB}NF_INT2_T${ac_uC}integer*2${ac_uD}
> ${ac_eA}NF_INT2_T${ac_eB}NF_INT2_T${ac_eC}integer*2${ac_eD}
> ${ac_dA}NF_INT1_IS_C_SIGNED_CHAR${ac_dB}NF_INT1_IS_C_SIGNED_CHAR${ac_dC}1${ac_dD}
> ${ac_uA}NF_INT1_IS_C_SIGNED_CHAR${ac_uB}NF_INT1_IS_C_SIGNED_CHAR${ac_uC}1${ac_uD}
> ${ac_eA}NF_INT1_IS_C_SIGNED_CHAR${ac_eB}NF_INT1_IS_C_SIGNED_CHAR${ac_eC}1${ac_eD}
> ${ac_dA}NF_INT2_IS_C_SHORT${ac_dB}NF_INT2_IS_C_SHORT${ac_dC}1${ac_dD}
> ${ac_uA}NF_INT2_IS_C_SHORT${ac_uB}NF_INT2_IS_C_SHORT${ac_uC}1${ac_uD}
> ${ac_eA}NF_INT2_IS_C_SHORT${ac_eB}NF_INT2_IS_C_SHORT${ac_eC}1${ac_eD}
> CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> cat > conftest.frag <<CEOF
> ${ac_dA}NF_INT_IS_C_INT${ac_dB}NF_INT_IS_C_INT${ac_dC}1${ac_dD}
> ${ac_uA}NF_INT_IS_C_INT${ac_uB}NF_INT_IS_C_INT${ac_uC}1${ac_uD}
> ${ac_eA}NF_INT_IS_C_INT${ac_eB}NF_INT_IS_C_INT${ac_eC}1${ac_eD}
> ${ac_dA}NF_REAL_IS_C_FLOAT${ac_dB}NF_REAL_IS_C_FLOAT${ac_dC}1${ac_dD}
> ${ac_uA}NF_REAL_IS_C_FLOAT${ac_uB}NF_REAL_IS_C_FLOAT${ac_uC}1${ac_uD}
> ${ac_eA}NF_REAL_IS_C_FLOAT${ac_eB}NF_REAL_IS_C_FLOAT${ac_eC}1${ac_eD}
> ${ac_dA}NF_DOUBLEPRECISION_IS_C_DOUBLE${ac_dB}NF_DOUBLEPRECISION_IS_C_DOUBLE${ac_dC}1${ac_dD}
> ${ac_uA}NF_DOUBLEPRECISION_IS_C_DOUBLE${ac_uB}NF_DOUBLEPRECISION_IS_C_DOUBLE${ac_uC}1${ac_uD}
> ${ac_eA}NF_DOUBLEPRECISION_IS_C_DOUBLE${ac_eB}NF_DOUBLEPRECISION_IS_C_DOUBLE${ac_eC}1${ac_eD}
> ${ac_dA}NCBYTE_T${ac_dB}NCBYTE_T${ac_dC}byte${ac_dD}
> ${ac_uA}NCBYTE_T${ac_uB}NCBYTE_T${ac_uC}byte${ac_uD}
> ${ac_eA}NCBYTE_T${ac_eB}NCBYTE_T${ac_eC}byte${ac_eD}
> CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> cat > conftest.frag <<CEOF
> ${ac_dA}NCSHORT_T${ac_dB}NCSHORT_T${ac_dC}integer*2${ac_dD}
> ${ac_uA}NCSHORT_T${ac_uB}NCSHORT_T${ac_uC}integer*2${ac_uD}
> ${ac_eA}NCSHORT_T${ac_eB}NCSHORT_T${ac_eC}integer*2${ac_eD}
> ${ac_dA}NO_STDLIB_H${ac_dB}NO_STDLIB_H${ac_dC}1${ac_dD}
> ${ac_uA}NO_STDLIB_H${ac_uB}NO_STDLIB_H${ac_uC}1${ac_uD}
> ${ac_eA}NO_STDLIB_H${ac_eB}NO_STDLIB_H${ac_eC}1${ac_eD}
> ${ac_dA}NO_SYS_TYPES_H${ac_dB}NO_SYS_TYPES_H${ac_dC}1${ac_dD}
> ${ac_uA}NO_SYS_TYPES_H${ac_uB}NO_SYS_TYPES_H${ac_uC}1${ac_uD}
> ${ac_eA}NO_SYS_TYPES_H${ac_eB}NO_SYS_TYPES_H${ac_eC}1${ac_eD}
> ${ac_dA}HAVE_FTRUNCATE${ac_dB}HAVE_FTRUNCATE${ac_dC}1${ac_dD}
> ${ac_uA}HAVE_FTRUNCATE${ac_uB}HAVE_FTRUNCATE${ac_uC}1${ac_uD}
> ${ac_eA}HAVE_FTRUNCATE${ac_eB}HAVE_FTRUNCATE${ac_eC}1${ac_eD}
> CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> cat > conftest.frag <<CEOF
> ${ac_dA}ptrdiff_t${ac_dB}ptrdiff_t${ac_dC}int${ac_dD}
> ${ac_uA}ptrdiff_t${ac_uB}ptrdiff_t${ac_uC}int${ac_uD}
> ${ac_eA}ptrdiff_t${ac_eB}ptrdiff_t${ac_eC}int${ac_eD}
> ${ac_dA}uchar${ac_dB}uchar${ac_dC}unsigned char${ac_dD}
> ${ac_uA}uchar${ac_uB}uchar${ac_uC}unsigned char${ac_uD}
> ${ac_eA}uchar${ac_eB}uchar${ac_eC}unsigned char${ac_eD}
> ${ac_dA}WORDS_BIGENDIAN${ac_dB}WORDS_BIGENDIAN${ac_dC}1${ac_dD}
> ${ac_uA}WORDS_BIGENDIAN${ac_uB}WORDS_BIGENDIAN${ac_uC}1${ac_uD}
> ${ac_eA}WORDS_BIGENDIAN${ac_eB}WORDS_BIGENDIAN${ac_eC}1${ac_eD}
> ${ac_dA}SIZEOF_SHORT${ac_dB}SIZEOF_SHORT${ac_dC}2${ac_dD}
> ${ac_uA}SIZEOF_SHORT${ac_uB}SIZEOF_SHORT${ac_uC}2${ac_uD}
> ${ac_eA}SIZEOF_SHORT${ac_eB}SIZEOF_SHORT${ac_eC}2${ac_eD}
> CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> cat > conftest.frag <<CEOF
> ${ac_dA}SIZEOF_INT${ac_dB}SIZEOF_INT${ac_dC}4${ac_dD}
> ${ac_uA}SIZEOF_INT${ac_uB}SIZEOF_INT${ac_uC}4${ac_uD}
> ${ac_eA}SIZEOF_INT${ac_eB}SIZEOF_INT${ac_eC}4${ac_eD}
> ${ac_dA}SIZEOF_LONG${ac_dB}SIZEOF_LONG${ac_dC}4${ac_dD}
> ${ac_uA}SIZEOF_LONG${ac_uB}SIZEOF_LONG${ac_uC}4${ac_uD}
> ${ac_eA}SIZEOF_LONG${ac_eB}SIZEOF_LONG${ac_eC}4${ac_eD}
> ${ac_dA}SIZEOF_FLOAT${ac_dB}SIZEOF_FLOAT${ac_dC}4${ac_dD}
> ${ac_uA}SIZEOF_FLOAT${ac_uB}SIZEOF_FLOAT${ac_uC}4${ac_uD}
> ${ac_eA}SIZEOF_FLOAT${ac_eB}SIZEOF_FLOAT${ac_eC}4${ac_eD}
> ${ac_dA}SIZEOF_DOUBLE${ac_dB}SIZEOF_DOUBLE${ac_dC}8${ac_dD}
> ${ac_uA}SIZEOF_DOUBLE${ac_uB}SIZEOF_DOUBLE${ac_uC}8${ac_uD}
> ${ac_eA}SIZEOF_DOUBLE${ac_eB}SIZEOF_DOUBLE${ac_eC}8${ac_eD}
> CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> cat > conftest.frag <<CEOF
> ${ac_dA}SIZEOF_OFF_T${ac_dB}SIZEOF_OFF_T${ac_dC}0${ac_dD}
> ${ac_uA}SIZEOF_OFF_T${ac_uB}SIZEOF_OFF_T${ac_uC}0${ac_uD}
> ${ac_eA}SIZEOF_OFF_T${ac_eB}SIZEOF_OFF_T${ac_eC}0${ac_eD}
> ${ac_dA}SIZEOF_SIZE_T${ac_dB}SIZEOF_SIZE_T${ac_dC}4${ac_dD}
> ${ac_uA}SIZEOF_SIZE_T${ac_uB}SIZEOF_SIZE_T${ac_uC}4${ac_uD}
> ${ac_eA}SIZEOF_SIZE_T${ac_eB}SIZEOF_SIZE_T${ac_eC}4${ac_eD}
> s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
> CEOF
> sed -f conftest.frag conftest.in > conftest.out
> rm -f conftest.in
> mv conftest.out conftest.in
>
> rm -f conftest.frag conftest.h
> case "$ac_file" in
> *.h|*.hh|*.H)
> echo "/* $ac_file. Generated automatically by configure. */" \
> > conftest.h
> ;;
> esac
> cat conftest.in >> conftest.h
> rm -f conftest.in
> if cmp -s $ac_file conftest.h 2>/dev/null; then
> echo "$ac_file is unchanged"
> rm -f conftest.h
> else
> rm -f $ac_file
> mv conftest.h $ac_file
> fi
> fi; done
>
>
>
> exit 0
>
> --------------0462A2C8C0D7A62E6777255B
> Content-Type: text/plain; charset=us-ascii; name="macros.make"
> Content-Transfer-Encoding: 7bit
> Content-Disposition: inline; filename="macros.make"
>
> # $Id: macros.make.in,v 1.23 1997/06/12 22:23:44 steve Exp $
>
> # The purpose of this file is to contain common make(1) macros.
> # It should be processed by every execution of that utility.
>
>
> # POSIX shell. Shouldn't be necessary -- but is under IRIX 5.3.
> SHELL = /bin/sh
>
>
> # Installation Directories:
> prefix = /home/markus/SOFTWARE/netCDF/netcdf-3.3.1
> exec_prefix = $(prefix)
> INCDIR = $(exec_prefix)/include
> LIBDIR = $(exec_prefix)/lib
> BINDIR = $(exec_prefix)/bin
> MANDIR = $(prefix)/man
>
>
> # Preprocessing:
> M4 = m4
> M4FLAGS = -B10000
> CPP = /lib/cpp
> CPPFLAGS = $(INCLUDES) $(DEFINES) -v
> FPP =
> FPPFLAGS =
> CXXCPPFLAGS = $(CPPFLAGS)
>
>
> # Compilation:
> CC = /bin/cc
> CXX = /bin/CC
> FC = /opt/fortran/bin/f77
> CFLAGS = +DA1.1 -D_INCLUDE_POSIX_SOURCE -Aa
> CXXFLAGS = $(CFLAGS) -Aa -D_INCLUDE_POSIX_SOURCE
> FFLAGS = -w +DAportable
> CC_MAKEDEPEND = false
> COMPILE.c = $(CC) -c $(CFLAGS) $(CPPFLAGS)
> COMPILE.cxx = $(CXX) -c $(CXXFLAGS) $(CXXCPPFLAGS)
> COMPILE.f = $(FC) -c $(FFLAGS)
> # The following command isn't available on some systems; therefore, the
> # `.F.o' rule is relatively complicated.
> COMPILE.F = $(COMPILE.f) $(FPPFLAGS)
>
>
> # Linking:
> MATHLIB = -lm
> FLIBS = -lU77
> LIBS =
> LINK.c = $(CC) -o $@ $(CFLAGS) $(LDFLAGS)
> LINK.cxx = $(CXX) -o $@ $(CXXFLAGS) $(LDFLAGS)
> LINK.F = $(FC) -o $@ $(FFLAGS) $(LDFLAGS)
> LINK.f = $(FC) -o $@ $(FFLAGS) $(LDFLAGS)
>
>
> # NetCDF files:
> NCDUMP = ncdump
> NCGEN = ncgen
>
>
> # Manual pages:
> WHATIS = whatis
> # The following macro should be empty on systems that don't
> # allow users to create their own manual-page indexes.
> MAKEWHATIS_CMD =
>
>
> # Misc. Utilities:
> AR = ar
> ARFLAGS = cru # NB: SunOS 4 doesn't like `-' option prefix
> RANLIB = ranlib
> TARFLAGS = -chf
>
>
> # Dummy macros: used only as placeholders to silence GNU make. They are
> # redefined, as necessary, in subdirectory makefiles.
> HEADER = dummy_header
> HEADER1 = dummy_header1
> HEADER2 = dummy_header2
> LIBRARY = dummy_library.a
> MANUAL = dummy_manual
> PROGRAM = dummy_program
>
>
> # Distribution macros:
> FTPDIR = /home/ftp/pub/$(PACKAGE)
> FTPBINDIR = /home/ftp/pub/binary/dummy_system
> VERSION = dummy_version
>
> --------------0462A2C8C0D7A62E6777255B
> Content-Type: text/plain; charset=us-ascii; name="nfconfig.inc"
> Content-Transfer-Encoding: 7bit
> Content-Disposition: inline; filename="nfconfig.inc"
>
> #if 0
> $Id: nfconfig.in,v 1.10 1997/06/11 16:57:53 steve Exp $
> #endif
>
>
> #ifndef UD_NETCDF_CPP_INC
> #define UD_NETCDF_CPP_INC
>
>
> #if 0
> Do not have C-style comments in here because this file is processed
> by both the FORTRAN compiler (for the nf_test/ stuff) and the C
> compiler (for the FORTRAN-callable interface routines) and some
> FORTRAN preprocessors do not understand the /*...*/ syntax.
> #endif
>
>
> #if 0
The following macros define the supplementary FORTRAN arithmetic
> datatypes beyond the standard INTEGER, REAL, and DOUBLEPRECISION --
> ostensibly corresponding to 8-bit and 16-bit integers, respectively.
> For example:
>
> #define NF_INT1_T byte
> #define NF_INT2_T integer*2
>
> These are the types of the relevant arguments in the NF_*_INT1() and
> NF_*_INT2() netCDF FORTRAN function calls. The word "ostensibly"
> is used advisedly: on some systems an "integer*2" datatype,
> nevertheless, occupies 64 bits (we are not making this up).
>
> If your FORTRAN system does not have the respective supplementary
> datatype, then do not define the corresponding macro.
> #endif
> #define NF_INT1_T byte
> #define NF_INT2_T integer*2
>
>
> #if 0
> Define the following NF_*_IS_C_* macros appropriatly for your system.
> The "INT1", "INT2" and "INT" after the "NF_" refer to the NF_INT1_T
> FORTRAN datatype, the NF_INT2_T FORTRAN datatype, and the INTEGER
> FORTRAN datatype, respectively. If the respective FORTRAN datatype
> does not exist, then do not define the corresponding macro.
> #endif
> #define NF_INT1_IS_C_SIGNED_CHAR 1
> #undef NF_INT1_IS_C_SHORT
> #undef NF_INT1_IS_C_INT
> #define NF_INT2_IS_C_SHORT 1
> #undef NF_INT2_IS_C_INT
> #define NF_INT_IS_C_INT 1
> #undef NF_INT_IS_C_LONG
> #define NF_REAL_IS_C_FLOAT 1
> #undef NF_REAL_IS_C_DOUBLE
> #define NF_DOUBLEPRECISION_IS_C_DOUBLE 1
> #undef NF_DOUBLEPRECISION_IS_C_FLOAT
>
>
> #if 0
> Whether the system uses something besides the IEEE floating-point
> format to represent floating-point values.
> #endif
> #undef NO_IEEE_FLOAT
>
>
> #if 0
> END OF CUSTOMIZATION
> #endif
>
>
> #if 0
> FORTRAN data types corresponding to netCDF version 2 "byte" and "short"
> data types (e.g. INTEGER*1, INTEGER*2). See file "ftest.F" for usage.
> #endif
> #if !defined(NO_NETCDF_2)
> # define NCBYTE_T byte
> # define NCSHORT_T integer*2
> #endif
>
>
> #endif
>
> --------------0462A2C8C0D7A62E6777255B
> Content-Type: text/plain; charset=us-ascii; name="ncconfig.h"
> Content-Transfer-Encoding: 7bit
> Content-Disposition: inline; filename="ncconfig.h"
>
> /* libsrc/ncconfig.h. Generated automatically by configure. */
> /* libsrc/ncconfig.in. Generated automatically from configure.in by
> autoheader. */
> /* $Id: ncconfig.in,v 1.21 1996/10/29 21:24:14 steve Exp $ */
> #ifndef _NCCONFIG_H_
> #define _NCCONFIG_H_
>
> /* Define if you're on an HP-UX system. */
> /* #undef _INCLUDE_POSIX_SOURCE */
>
> /* Define if type char is unsigned and you are not using gcc. */
> #ifndef __CHAR_UNSIGNED__
> /* #undef __CHAR_UNSIGNED__ */
> #endif
>
> /* Define if your struct stat has st_blksize. */
> /* #undef HAVE_ST_BLKSIZE */
>
> /* Define to `long' if <sys/types.h> doesn't define. */
> /* #undef off_t */
>
> /* Define to `unsigned' if <sys/types.h> doesn't define. */
> /* #undef size_t */
>
> /* Define if you have the ANSI C header files. */
> /* #undef STDC_HEADERS */
>
> /* Define if your processor stores words with the most significant
> byte first (like Motorola and SPARC, unlike Intel and VAX). */
> #define WORDS_BIGENDIAN 1
>
> /* Define if you don't have the <stdlib.h>. */
> #define NO_STDLIB_H 1
>
> /* Define if you don't have the <sys/types.h>. */
> #define NO_SYS_TYPES_H 1
>
> /* Define if you have the ftruncate function */
> #define HAVE_FTRUNCATE 1
>
> /* Define if you don't have the strerror function */
> /* #undef NO_STRERROR */
>
> /* The number of bytes in a size_t */
> #define SIZEOF_SIZE_T 4
>
> /* The number of bytes in a off_t */
> #define SIZEOF_OFF_T 0
>
> /* Define to `int' if system doesn't define. */
> /* #undef ssize_t */
>
> /* Define to `int' if system doesn't define. */
> #define ptrdiff_t int
>
> /* Define to `unsigned char' if system doesn't define. */
> #define uchar unsigned char
>
> /* Define if the system does not use IEEE floating point representation */
> /* #undef NO_IEEE_FLOAT */
>
> /* The number of bytes in a double. */
> #define SIZEOF_DOUBLE 8
>
> /* The number of bytes in a float. */
> #define SIZEOF_FLOAT 4
>
> /* The number of bytes in a int. */
> #define SIZEOF_INT 4
>
> /* The number of bytes in a long. */
> #define SIZEOF_LONG 4
>
> /* The number of bytes in a short. */
> #define SIZEOF_SHORT 2
>
> #endif /* !_NCCONFIG_H_ */
>
> --------------0462A2C8C0D7A62E6777255B
> Content-Type: text/plain; charset=us-ascii; name="stddef.h"
> Content-Transfer-Encoding: 7bit
> Content-Disposition: inline; filename="stddef.h"
>
> /* @(#) $Revision: 66.2 $ */
> #ifndef _STDDEF_INCLUDED
> #define _STDDEF_INCLUDED
>
> #ifndef _SYS_STDSYMS_INCLUDED
> # include <sys/stdsyms.h>
> #endif /* _SYS_STDSYMS_INCLUDED */
>
> #ifdef _INCLUDE__STDC__
> # ifndef NULL
> # define NULL 0
> # endif
>
> # define offsetof(__s_name, __m_name) ((size_t)&(((__s_name*)0)->__m_name))
>
> # ifndef _SIZE_T
> # define _SIZE_T
> typedef unsigned int size_t;
> # endif
>
> # ifndef _WCHAR_T
> # define _WCHAR_T
> typedef unsigned int wchar_t;
> # endif
>
> typedef int ptrdiff_t;
>
> #endif /* _INCLUDE__STDC__ */
> #endif /* _STDDEF_INCLUDED */
>
> --------------0462A2C8C0D7A62E6777255B--
>
--------
Steve Emmerson <http://www.unidata.ucar.edu>
