[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

960604: NetCDF installation, Linux

Susana,

> To: address@hidden
> cc: Susana Pires Vilanova <address@hidden>
> From: Susana Pires Vilanova <address@hidden>
> Subject: Re: 960531: NetCDF installation, Linux 
> Organization: .
> Keywords: 199605241503.AA18983

In the above message you wrote:

> I've started the installation from the begining so that you understand 
> better what is happening. I will descrive you what I did and the error 
> messages.
> 
> 1- I have changed my CUSTOMIZE file to
> 
>       CC=gcc
>       CFLAGS='-m486 -O2 -fomit-frame-pointer -pipe'
>       CXX=g++
>       CXXFLAGS=-O -I/usr/include/g++
>       ude-directory
>       FC=""
>       OS=linux
> 
> 2-I have run the 'configure' in src directory
> 
>       $configure
> 
> and I have not received any error message.
> 
> 3-I have 'make all' using tcsh
> 
>       %make all > & ! log &
>       %tail -f log
> 
> and I have got an error message about ncgen. The error part was
> 
>       ...
>       lex ncgen.l
>       yacc -d ncgen.y
>       make: /usr/bin/make: cannot execute binary file
>       make(1): *** (ncgentab.c) Error 126
>       make(1): Leaving directory '/disk2/GMT/netcdf-2.4.2/src/ncgen'
>       make: *** (ncgen/all) Error 1
> 
> 4- I went to the ncgen directory and I type
> 
>       $make clean
>       $make -n all > logn
> 
> The 'logn' file is
>  
>       gcc -c -m486 -O2 -fomit-frame-pointer -pipe -I../libsrc  main.c
>       gcc -c -m486 -O2 -fomit-frame-pointer -pipe -I../libsrc  load.c
>       lex ncgen.l
>       mv lex.yy.c ncgenyy.c
>       yacc -d ncgen.y
>       mv y.tab.c ncgentab.c
>       mv y.tab.h ncgentab.h
>       gcc -c -m486 -O2 -fomit-frame-pointer -pipe -I../libsrc  ncgentab.c
>       gcc -c -m486 -O2 -fomit-frame-pointer -pipe -I../libsrc  escapes.c
>       gcc -c -m486 -O2 -fomit-frame-pointer -pipe -I../libsrc  getfill.c
>       gcc -c -m486 -O2 -fomit-frame-pointer -pipe -I../libsrc  init.c
>       gcc -c -m486 -O2 -fomit-frame-pointer -pipe -I../libsrc  close.c
>       gcc -c -m486 -O2 -fomit-frame-pointer -pipe -I../libsrc  genlib.c
>       if [ -r ncgen.f -o -r ncgen.F ]; then \
>           ld=' -o ncgen '; \
>       elif [ -r ncgen.cc -o -r ncgen.C ]; then \
>           ld='g++ -o ncgen '; \
>       else \
>           ld='gcc -o ncgen -m486 -O2 -fomit-frame-pointer -pipe'; \
>       fi; \
>       cmd="$ld  main.o load.o ncgentab.o escapes.o getfill.o init.o close.o 
> genlib.o ../libsrc/libnetcdf.a "; \
>       echo $cmd; \
>       $cmd \
>       || (rm -f ncgen; exit 1)
> 
> 5- Then I've typed in ncgen directory
> 
>       $make all (and the error message was the one in log)
>       $yacc -d ncgen.y
>       $mv y.tab.c ncgentab.c
>       $mv y.tab.h ncgentab.h
>       $make all
> 
> and no error messages apear.
> 
> 6- Then, I went to src directory and did
> 
>       $make all
>       $make test
> 
> I had no error messages.
> 
> 7-I did the install in two diferent ways 
> 
> 7a)- I did 'make install' using tcsh:
> 
>       %make install > & ! loginst &
>       %tail -f loginst
> 
> The error part in 'loginst' is 
> 
>       ...
>       making `install' in directory /disk2/GMT/netcdf-2.4.2/src/ncdump
> 
>       make[1]: Entering directory `/disk2/GMT/netcdf-2.4.2/src/ncdump'
>       Makefile:354: warning: overriding commands for target 
> `/disk2/GMT/netcdf-2.4.2/bin'
>       Makefile:351: warning: ignoring old commands for target 
> `/disk2/GMT/netcdf-2.4.2/bin'
>       make: *** [ncdump/install] Error 1
> 
> And then I tried to make the install in the semi-manual way executing
> 
>       $(cd libsrc && make install)
>       $(cd fortran && make install)
>       $(cd ncdump && make install)
>       $(cd ncgen && make install)
> 
> and I had no error messages (just the two usual warnings).
> 
> 7b)- I just atempted the semi-manual way:
> 
>       $(cd libsrc && make install)
>       $(cd fortran && make install)
>       $(cd ncdump && make install)
>       $(cd ncgen && make install)
> 
> The first command was OK but the three last commands send me the message 
> 
>       Makefile:354: warning overriding commands for target
>       'disk2/GMT/netcdf-2.4.2/bin'
>       Makefile:351. warning ignoring old commands for target
>       'disk2/GMT/netcdf-2.4.2/bin'
>       IOT trap/Abort
> 9- The results of 7a) and 7b) were the same. Tiping
> 
>       $ls -lR bin include lib man 
> 
> I get
> 
>       /bin/ls: bin: No such file or directory
>       /bin/ls: man: No such file or directory
>       include:
>       total 17
>       -rw-r--r--   1 root     root        16117 Jun  4 17:30 netcdf.h
> 
>       lib:
>       total 62
>       -rw-r--r--   1 root     root        62162 Jun  4 17:30 libnetcdf.a
> 
> I hope this can help you to understand whats happening.

Thank you for the very clear exposition.  It does help me understand
your problem.

I suggest the following:

    1.  Go to the `port/' subdirectory.

    2.  Apply the enclosed patch to the file `master.mk.in'.

    3.  Go to the top-level, netCDF source directory (i.e. up one level).

    4.  Execute the command `./config.status'.  This will regenerate the
        makefiles using the patched master makefile.

    5.  Execute the command `make install'.  Trap the output and send it
        to me if a problem occurs.

Please let me know if this helps.

--------
Steve Emmerson   <address@hidden>


--------Begin patch for port/master.mk.in
Index: master.mk.in
===================================================================
RCS file: /upc/share/CVS/udport/master.mk.in,v
retrieving revision 1.30
retrieving revision 1.31
diff -c -r1.30 -r1.31
*** 1.30        1996/05/02 15:46:22
--- 1.31        1996/05/07 15:14:13
***************
*** 1,6 ****
  # This is the master makefile.  It contains general rules.
  #
! # $Id: master.mk.in,v 1.30 1996/05/02 15:46:22 steve Exp $
  
  
  .SUFFIXES:
--- 1,6 ----
  # This is the master makefile.  It contains general rules.
  #
! # $Id: master.mk.in,v 1.31 1996/05/07 15:14:13 steve Exp $
  
  
  .SUFFIXES:
***************
*** 16,22 ****
  CPP           = @CPP@
  CC_MAKEDEPEND = @CC_MAKEDEPEND@
  CXX           = @CXX@
- INCDIR                = $(prefix)/include
  FC            = @FC@
  LINT          = lint
  LINTFLAGS     = -u
--- 16,21 ----
***************
*** 147,152 ****
--- 146,152 ----
  RANLIB                = @RANLIB@
  LIBDIR                = $(exec_prefix)/lib
  LIB_A         = lib$(LIBRARY).a
+ LIBFILE               = dummy-libfile         # to silence GNU make(1)
  
  library:              $(LIB_A)
  
***************
*** 251,256 ****
--- 251,257 ----
  # Programs:
  ############################################################################
  BINDIR                = $(exec_prefix)/bin
+ BINFILE               = dummy-binfile
  
  programs:     $(PROGRAMS)
  program:
***************
*** 319,324 ****
--- 320,328 ----
  ############################################################################
  # Header files:
  ############################################################################
+ INCDIR                = $(prefix)/include
+ HEADER                = dummy-header          # to silence GNU make(1)
+ 
  installed_headers:    FORCE
        @if [ -n "$(HEADERS)" ]; then \
            headers="$(HEADERS)"; \
***************
*** 348,353 ****
--- 352,358 ----
  # `etc/' files:
  ############################################################################
  ETCDIR        = $(prefix)/etc
+ ETCFILE       = dummy-etcfile         # to silence GNU make(1)
  
  installed_etcfiles:
        @if [ -n "$(ETCFILES)" ]; then \
***************
*** 379,384 ****
--- 384,390 ----
  ############################################################################
  MANDIR        = $(prefix)/man
  CATMAN        = @CATMAN@
+ MANUAL        = dummy-manual  # to slience GNU make
  
  installed_manuals:    FORCE
        @if [ -n "$(MANUALS)" ]; then \
***************
*** 461,467 ****
  ############################################################################
  # Documents:
  ############################################################################
! DOCDIR        = $(prefix)/doc
  
  installed_documents:  FORCE
        case "$(DOCUMENTS)" in \
--- 467,474 ----
  ############################################################################
  # Documents:
  ############################################################################
! DOCDIR                = $(prefix)/doc
! DOCUMENT      = dummy-document        # to silence GNU make(1)
  
  installed_documents:  FORCE
        case "$(DOCUMENTS)" in \
***************
*** 492,497 ****
--- 499,505 ----
  # TeX-Info Pages:
  ############################################################################
  INFODIR       = $(prefix)/info
+ INFO  = dummy-info    # to silence GNU make(1)
  
  installed_infos:      FORCE
        if [ -z "$(MAKEINFO)" ]; then \