[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 20001023: Failover site request from PSU (fwd)

Jeff Weber wrote:
> 
> HI guys,
> 
> any help here?........
> 
> -Jeff
> 
> ---------- Forwarded message ----------
> Date: Fri, 10 Nov 2000 14:53:33 -0500
> From: Jeff Wolfe <address@hidden>
> To: Tom Priddy <address@hidden>
> Cc: address@hidden, emaxwell <address@hidden>, address@hidden
> Subject: Re: 20001023: Failover site request from PSU
> 
> Somthing doesn't seem right.. Connecting gets me this in the logs:
> 
> Nov 10 19:32:44 catena rpc.ldmd[2739]: Starting Up (built: Aug 11 1999 
> 15:19:15)Nov 10 19:32:44 catena kelvin[2743]: run_requester: Starting Up: 
> kelvin.ca.uky.edu.
> Nov 10 19:32:44 catena kelvin[2743]: run_requester: 20001110193054.630 
> TS_ENDT {{WMO,  ".*"}}
> Nov 10 19:32:45 catena pqexpire[2740]: Starting Up
> Nov 10 19:32:45 catena kelvin[2743]: FEEDME(kelvin.ca.uky.edu.): OK
> Nov 10 19:32:45 catena pqbinstats[2741]: Starting Up (2739)
> Nov 10 19:32:45 catena pqact[2742]: Starting Up
> Nov 10 19:32:47 catena pqexpire[2740]: > Recycled  29400.289 kb/hr ( 
> 11428.494 prods per hour)
> Nov 10 19:37:50 catena pqexpire[2740]: > Recycled  22108.841 kb/hr (  
> 8969.765 prods per hour)
> Nov 10 19:42:52 catena pqexpire[2740]: > Recycled  20368.347 kb/hr (  
> 9201.483 prods per hour)
> Nov 10 19:46:15 catena rpc.ldmd[2739]: Exiting
> Nov 10 19:46:15 catena rpc.ldmd[2739]: Terminating process group
> Nov 10 19:46:15 catena kelvin[2743]: Exiting
> Nov 10 19:46:15 catena pqact[2742]: Exiting
> Nov 10 19:46:15 catena pqbinstats[2741]: Exiting
> Nov 10 19:46:15 catena pqexpire[2740]: Exiting
> Nov 10 19:46:15 catena pqexpire[2740]: > Up since:      20001110193245.068
> Nov 10 19:46:15 catena pqexpire[2740]: > Queue usage (bytes):100007936
> Nov 10 19:46:15 catena pqexpire[2740]: >          (nregions):   29638
> Nov 10 19:46:15 catena pqexpire[2740]: > nbytes recycle:      4619576 ( 
> 20368.347 kb/hr)
> Nov 10 19:46:15 catena pqexpire[2740]: > nprods deleted:         2038 (  
> 9201.483 per hour)
> Nov 10 19:46:15 catena pqexpire[2740]: > First deleted: 20001110182432.267
> Nov 10 19:46:15 catena pqexpire[2740]: > Last  deleted: 20001110183749.617
> ~
> 
> ldmping:
> catena:[88]% ldmping kelvin.ca.uky.edu
> Nov 10 19:49:24      State    Elapsed Port   Remote_Host           rpc_stat
> Nov 10 19:49:24 RESPONDING   0.344833 32860   kelvin.ca.uky.edu
> Nov 10 19:49:49 RESPONDING   0.063215 32860   kelvin.ca.uky.edu
> Nov 10 19:50:14 RESPONDING   0.065176 32860   kelvin.ca.uky.edu
> catena:[89]%
> 
> But no data arrives, either by ldmadmin watch or in any of our decoders.
> 
> Any ideas?
> 
> -JEff
> 
> In message <address@hidden>, Tom Priddy writes:
> > From: Tom Priddy
> >
> > OK....Jeff....try it now.  See if you can see us..or see data coming from 
> > us.
> >
> > Jeff Wolfe wrote:
> >
> > > In message <address@hidden>, Tom Priddy writes:
> > > > From: Tom Priddy
> > > >
> > > > Yes...no problem. This will be the first time we've tried to feed 
> > > > anyone.
> > ..other
> > > > than our backup systems. Should have this setup within this afternoon. 
> > > > I'
> > m
> > > > looking forward to seeing this work. Jeff....you now have my email 
> > > > addres
> > s.
> > > > Don't hesitate to contact me. Also....my system's administrator is Dr. 
> > > > Wa
> > nhong
> > > > Wang...he just returned from the Unidata workshops. And my other staff
> > > > meteorologist is Ms. Erin Maxwell.
> > > > You might add them to any emails sent this way. Their email addresses 
> > > > are
> > :
> > > > address@hidden    and
> > > > address@hidden
> > > >
> > > > And, finally, Jeff please reply to this email so I'll know that you 
> > > > recei
> > ved
> > > > it. Good luck!
> > > >
> > >
> > > Thanks.. As Jeff Weber pointed out, we're looking for a failover site when
> > the
> > > primary site here at PSU has problems. Let me know when you have your LDM
> > > updated and we'll test things out from our end.
> > >
> > > Thanks..
> > >
> > > -JEff
> >
> > --
> > ============================================================
> > ***Please notice NEW Area Code***
> >
> > Tom Priddy                                address@hidden
> > Extension Ag. Meteorologist          ph:  859-257-3000 ext 245
> > Ag. Weather Center                  fax:  859-257-5671
> > 243 Ag. Engineering Bldg
> > Dept. of Biosystems and Ag. Engr.
> > University of Kentucky
> > Lexington, KY 40546-0276
> > HOMEPAGE   http://wwwagwx.ca.uky.edu
> > ============================================================
> >
> >
> >

Hi Jeff and Tom,

I do not see any problems being reported in the log, other than the ldm 
immediately shutting down.  One thing for Tom to try is running rpc.ldmd in 
verbose mode (or even debug mode) directly from the command line.  That is, 
from $LDMHOME try:
        bin/rpc.ldmd -vl - etc/ldmd.conf
and see if it gives you any more information. If that doesn't help, you can 
replace the 'v' with 'x' to get debugging level logging.

Try this and let me know what happens.

Anne
-- 
***************************************************
Anne Wilson                     UCAR Unidata Program            
address@hidden                 P.O. Box 3000
                                  Boulder, CO  80307
----------------------------------------------------
Unidata WWW server       http://www.unidata.ucar.edu/
****************************************************