NOTE: The decoders mailing list is no longer active. The list archives are made available for historical reasons.
Chris and Mike, it's been awhile since we last talked. since then we have started using tomcat 5.5.17 and Java 1.5. i know, i said to use early versions of tomcat and java but there was some good performance improvements. it will probably be better to upgrade now verses later. I'll attach the conf/server.xml file, that should help will the tomcat configurations. also, we been using java jdk1.5.0_07. On Wed, 28 Jun 2006, Chris Herbster wrote: > Rob, > > Mike says we are ready for the next part (the xml files). actually the catalogs are shipped with the TDS war file but the top catalog doesn't have an entry for them. i attached the top catalog (catalog.xml) that goes in the content/thredds/ directory under tomcat, ie. /opt/apache-tomcat-5.5.17/content/thredds/catalog.xml now the idd data should all be available. there will be a new TDS release in a couple of days if you wanted to wait. let me know if you need any help. robb... > > Thanks!!!! > > CH > > -------- Original Message -------- > Subject: Re: [Fwd: Re: Motherlode clone.] > Date: Tue, 27 Jun 2006 14:42:19 -0400 > From: Mike Masscotte <masscotm@xxxxxxxx> > To: Chris Herbster <Christopher.Herbster@xxxxxxxx> > References: <449C1470.2070008@xxxxxxxx> > > > > This part is done. We now need the xml files for the data tree. > > -Mike > > Chris Herbster wrote: > > > A second time, with HTML markup which may help the cut-n-paste efforts. > > > > CH > > > > -------- Original Message -------- > > Subject: Re: Motherlode clone. > > Date: Wed, 31 May 2006 11:29:55 -0600 (MDT) > > From: Robb Kambic <rkambic@xxxxxxxxxxxxxxxxxxxxxxxx> > > Organization: UCAR/Unidata > > To: Chris Herbster <Christopher.Herbster@xxxxxxxx> > > CC: Mike Masscotte <masscotm@xxxxxxxx>, support-thredds > > <support-thredds@xxxxxxxxxxxxxxxxxxxxxxxx>, decoders > > <support-decoders@xxxxxxxxxxxxxxxxxxxxxxxx> > > References: <4443C3B2.50301@xxxxxxxxxxx> <4443E1DE.60103@xxxxxxxx> > > <Pine.GSO.4.51.0604191250550.27726@xxxxxxxxxxxxxxxxxxxxxxxxx> > > <444D2D5F.5030902@xxxxxxxx> > > <Pine.GSO.4.51.0604261253360.25178@xxxxxxxxxxxxxxxxxxxxxxxx> > > <44734E18.6020409@xxxxxxxx> > > > > > > > >Chris and Mike, > > > >sorry for the delay in getting back to you about the pqacts, etc. > > > >there are three thredd pqacts that i'll attach: pqact.thredds > >pqact.threddsconduit pqact.threddsradar that need to be place in ~ldm/etc > >directory. also the etc/ldmd.conf file needs to have these three line > >added to reference the pqacts. > > > >exec "pqact -f ANY-CONDUIT-NNEXRAD-CRAFT /opt/ldm/etc/pqact.thredds" > >exec "pqact -f CONDUIT|SPARE /opt/ldm/etc/pqact.threddsconduit" > >exec "pqact -f NNEXRAD|CRAFT /opt/ldm/etc/pqact.threddsradar" > > > > > >i believe the only extra s/w needed is the netCDF decoders package, it's > >available at: http://www.unidata.ucar.edu/software/decoders/ > > > >the binaries from the build go into the ~ldm/decoders directory and the > >etc files from the build go into the ~ldm/etc directory. > > > >if you want to bypass this step, comment out the pqact > >entries that have the PIPE actions then you can come back later to install > >them. > > > > > >there is a new perl script used to scour the directory structure called > >manageFilesDirs.pl and it goes into the ~ldm/util directory. i'll attach > >the script too. also there is a manageFilesDirs.conf file to configure it > >that goes into the ~ldm/etc direction, i'll attach too. the conf file > >should be set correctly, so no mods will be needed unless you change the > >directory structure in the pqacts. i suggest that you don't change them > >because all the thredds configure file exepect that dir structure. > > > >it is run once a day from cron, ie > > > ># > ># files/dirs managing script > >30 21 * * * util/manageFilesDirs.pl -f > >/local/ldm/etc/manageFilesDirs.conf > /data/ldm/logs/manageFilesDirs.log > ># > > > > > >after this is setup, then we can start on the thredds configurations. > > > >robb... > > > > > >On Tue, 23 May 2006, Chris Herbster wrote: > > > >> Rob, > >> > >> We seem to be ready on this end for a set of pqact entries to populate > >> the catalog. Please work with Mike to see if he needs any other parts > >> besides these. I think he said something about needing some XML pieces > >> too. > >> > >> Thanks! > >> > >> CH > >> > >> Robb Kambic wrote: > >> > >> >Sounds good to me, let me know when help is needed? > >> > > >> >robb... > >> > > >> > > >> > > >> > > >> >On Mon, 24 Apr 2006, Chris Herbster wrote: > >> > > >> > > >> > > >> >>Hi Robb, > >> >> > >> >>As always, another good time in Boulder! (-; > >> >> > >> >>Off hand, I'd say, "Let's do everything that you do." However, I'll > >> >>defer on this to Mike Masscotte. He has done a great job of getting > >> >>things cleaned up from when I tried to run things and he might have some > >> >>suggestions (or just say "Let's do it!") > >> >> > >> >>We have the LDM up and running. We'll need to do the next piece to get > >> >>ready.... I'll let Mike set the pace on this end. > >> >> > >> >>CH > >> >> > >> >>Robb Kambic wrote: > >> >> > >> >> > >> >> > >> >>>Hey Chris, > >> >>> > >> >>>It was really good to sit down and talk with you at usercomm diner. I > >> >>>haven't had that much fun in awhile. Anyway, if you are still interested > >> >>>in doing a motherlode clone we can start on it. Could you list the data > >> >>>products that you are interested in receiving? or are you interested in > >> >>>receiving all products just like motherlode? > >> >>> > >> >>> > >> >>>Once the initial setup is done, then upgrades should be easy. The 2 main > >> >>>external programs are the LDM and Jakarta-Tomcat. If you could get your > >> >>>system admin to install these with users ldm and tomcat then stage > >> >>>would be > >> >>>set. The tomcat version we are using is jakarta-tomcat-5.0.28, i know > >> >>>there are newer ones released but this is the version that we have > >> >>>tested > >> >>>the s/w. At this point do you want to install the s/w, there are > >> >>>on-line > >> >>>documentation or do you want me to install it and do the initial > >> >>>configuration? > >> >>> > >> >>>The documentation is located at: > >> >>> > >> >>>http://motherlode.ucar.edu:8080/thredds/docs/ > >> >>> > >> >>> > >> >>>Take care, > >> >>> > >> >>>robb... > >> >>> > >> >>> > >> >>> > >> >>>============================================================================== > >> >>>Robb Kambic Unidata Program Center > >> >>>Software Engineer III Univ. Corp for Atmospheric > >> >>>Research > >> >>>rkambic@xxxxxxxxxxxxxxxx WWW: > >> >>>http://www.unidata.ucar.edu/ > >> >>>============================================================================== > >> >>> > >------------------------------------------------------------------------ > > > ># > ># This pqact defines the directory structure expected by the THREDDS Data > >Server > ># default configuration. It includes the pqact entries using decoders and > >FILE > ># actions to create the structure. If this pqact is implemented then the > ># THREDDS Data Server should work without doing any data structure > ># configurations. Default configuration starting at the ~ldm/data directory: > ># > ># pub > ># pub/native > ># > ># data/pub/native/surface/metar/{day}/{station} > ># data/pub/native/surface/synoptic/{day}/{station} commented out > ># data/pub/native/surface/buoy/{day}/{station} commented out > ># data/pub/native/surface/zone/{day}/{station} commented out > ># data/pub/native/nwstg/text/{day} > ># data/pub/native/upperair/{day}/{station} commented out > ># > ># pub/native/satellite/{band}/{product}_{resolution}/{day} > ># > ># pub/native/profiler/wind/06min/{day} > ># pub/native/profiler/wind/01hr/{day} > ># pub/native/profiler/RASS/06min/{day} > ># pub/native/profiler/RASS/01hr/{day} > ># pub/native/profiler/bufr/{day} commented out > ># > ># pub/native/radar/10km_mosaic/{day} > ># pub/native/radar/composite/{product}/{resolution}/{day} > ># pub/native/radar/level2/{station}/{day} > ># pub/native/radar/level3/{product}/{station}/{day} > ># > ># pub/native/grid/NCEP/DGEX/Alaska_12km > ># pub/native/grid/NCEP/DGEX/CONUS_12km //Downscaled GFS with Eta > >Extension(DGEX) > ># pub/native/grid/NCEP/GFS/Alaska_191km > ># pub/native/grid/NCEP/GFS/CONUS_80km > ># pub/native/grid/NCEP/GFS/CONUS_95km > ># pub/native/grid/NCEP/GFS/CONUS_191km > ># pub/native/grid/NCEP/GFS/Ensemble_1p25deg > ># pub/native/grid/NCEP/GFS/Extended_5p0deg > ># pub/native/grid/NCEP/GFS/Global_0p5deg > ># pub/native/grid/NCEP/GFS/Global_onedeg > ># pub/native/grid/NCEP/GFS/Global_2p5deg > ># pub/native/grid/NCEP/GFS/Global_1p0deg_Ensemble > ># pub/native/grid/NCEP/GFS/Global_2p5deg_Ensemble > ># pub/native/grid/NCEP/GFS/Hawaii_160km > ># pub/native/grid/NCEP/GFS/N_Hemisphere_381km > ># pub/native/grid/NCEP/GFS/Puerto_Rico_191km > ># pub/native/grid/NCEP/GFS/Spectral_1p25deg > ># pub/native/grid/NCEP/NAM/Alaska_11km > ># pub/native/grid/NCEP/NAM/Alaska_22km > ># pub/native/grid/NCEP/NAM/Alaska_45km/conduit > ># pub/native/grid/NCEP/NAM/Alaska_45km/noaaport > ># pub/native/grid/NCEP/NAM/Alaska_95km > ># pub/native/grid/NCEP/NAM/CONUS_12km > ># pub/native/grid/NCEP/NAM/CONUS_20km/noaaport > ># pub/native/grid/NCEP/NAM/CONUS_20km/surface > ># pub/native/grid/NCEP/NAM/CONUS_20km/selectsurface > ># pub/native/grid/NCEP/NAM/CONUS_40km/noaaport > ># pub/native/grid/NCEP/NAM/CONUS_40km/conduit > ># pub/native/grid/NCEP/NAM/CONUS_80km > ># pub/native/grid/NCEP/NAM/DGEX/Alaska_12km > ># pub/native/grid/NCEP/NAM/DGEX/CONUS_12km > ># pub/native/grid/NCEP/NAM/Polar_90km > ># pub/native/grid/NCEP/NDFD/CONUS_5km > ># pub/native/grid/NCEP/OCEAN/Global_2x2deg > ># pub/native/grid/NCEP/RUC/CONUS_40km > ># pub/native/grid/NCEP/RUC/CONUS_80km > ># pub/native/grid/NCEP/RUC2/CONUS_20km/hybrid > ># pub/native/grid/NCEP/RUC2/CONUS_20km/pressure > ># pub/native/grid/NCEP/RUC2/CONUS_20km/surface > ># pub/native/grid/NCEP/SPECTRAL/Global_5x2p5deg > ># pub/native/grid/ECMWF/model? > ># pub/native/grid/UKMET/thin > ># pub/native/grid/CMC/GEM // Canadian grid > ># pub/native/grid/FNMOC/NOGAPS // FNMOC grid > ># pub/native/grid/FNMOC/COAMPS // FNMOC grid > ># pub/native/grid/UNIDATA/WSETA > ># pub/native/grid/{center}/WRF > ># > ># grids off of nwstg binary channel, entered above in correct model location > ># pub/native/grid/NCEP/NAM/CONUS_12km > ># pub/native/grid/NCEP/NAM/Alaska_11km > ># pub/native/grid/NCEP/DGEX/CONUS_12km //Downscaled GFS with Eta > >Extension(DGEX) > ># pub/native/grid/NCEP/DGEX/Alaska_12km > ># pub/native/grid/NCEP/NDFD/CONUS_5km > ># pub/native/grid/NCEP/GFS/CONUS_191km > ># > ># Decoded data > ># > ># pub/decoded/netcdf/surface/metar > ># pub/decoded/netcdf/surface/synoptic > ># pub/decoded/netcdf/surface/buoy > ># pub/decoded/netcdf/upperair > ># pub/decoded/netcdf/grid/{center} > ># pub/decoded/netcdf/grid/NCEP/GFS/CONUS_80km > ># pub/decoded/netcdf/grid/NCEP/GFS/Global_5x2p5deg > ># pub/decoded/netcdf/grid/NCEP/GFS/Global_5x5deg > ># pub/decoded/netcdf/grid/NCEP/NAM/CONUS_80km > ># pub/decoded/netcdf/grid/NCEP/NGM/CONUS_80km > ># pub/decoded/netcdf/grid/NCEP/OCEAN/Global_5x2p5deg > ># pub/decoded/netcdf/grid/NCEP/RUC/CONUS_80km > ># pub/decoded/netcdf/grid/NCEP/RUC2/CONUS_40km > ># pub/decoded/netcdf/grid/NCEP/SST/Global_2x2deg > ># pub/decoded/netcdf/grid/NCEP/SST/Global_5x2p5deg > ># > ># > ># Restricted data > ># > ># ucar_only/native/ACARS/{day} > ># > >#------------------------------------------------------------------------------- > ># > ># Surface test data > ># > ># All aviation reports including metar tests, broken/written to stn files > >DDS|IDS ^S(A....|P....|XUS8.) .... ([0-3][0-9]) > > PIPE decoders/metarWriter > > data/pub/native/surface/metar > > (\2:yyyy)(\2:mm) > ># > ># Synoptic reports, broken/written to stn files > >#DDS|IDS ^SM.... .... ([0-3][0-9]) > ># PIPE decoders/synopticWriter > ># data/pub/native/surface/synoptic > ># (\1:yyyy)(\1:mm) > ># > ># buoy reports, broken/written to stn or WMO ID numbers files > >#DDS|IDS ^S[NS].... .... ([0-3][0-9]) > ># PIPE decoders/buoyWriter > ># data/pub/native/surface/buoy > ># (\1:yyyy)(\1:mm) > ># > ># zone reports, broken/written to zone files > >#DDS|IDS ^FOUS5. .... ([0-3][0-9]) > ># PIPE decoders/surface/zoneWriter > ># data/pub/native/zone > ># (\1:yyyy)(\1:mm) > ># > ># all of DDS/PPS/IDS | NOAAPORT textual data > >DDPLUS|IDS ^[^\-] > > FILE > > data/pub/native/nwstg/text/%Y%m%d/SURFACE_DDPLUS_%Y%m%d_%H00.txt > ># > ># upper air reports, broken/written to stn files > >#DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9]) > ># PIPE decoders/upperairWriter > ># data/pub/native/upperair > ># (\1:yyyy)(\1:mm) > ># > ># > ># NOAAPORT GINI Images > ># > ># PNG compressed NOAAPORT GINI Images > >#NIMAGE ^sat/ch[0-9]/.*/(.*)/([12][0-9][0-9][0-9][01][0-9][0-3][0-9]) > >([0-2][0-9])([0-5][0-9])/(.*)/(.*km)/ > ># FILE > ># data/pub/native/satellite/\1/\5_\6/\2/\5_\6_\1_\2_\3\4.gini > ># > ># PIPE -close > ># util/pngg2gini -vl logs/ldm-mcidas.log > ># > ># Zlib compressed NOAAPORT GOES-East/West GINI Images -- FILE > >NIMAGE ^satz/ch[0-9]/.*/(.*)/([12][0-9][0-9][0-9][01][0-9][0-3][0-9]) > >([0-2][0-9])([0-5][0-9])/(.*)/(.*km)/ > > PIPE -close > > util/ldmfile.sh > > data/pub/native/satellite/\1/\5_\6/\2/\5_\6_\1_\2_\3\4.gini > ># > ># FSL hourly summary and 6-minute wind profiler data %Y%m%d_%H00 > >FSL2 ^FSL\.NetCDF\.NOAAnet\.windprofiler\.(01hr|06min)\.(....)(...)(..) > > FILE > > data/pub/native/profiler/wind/\1/\2%m%d/PROFILER_wind_\1_\2%m%d_\400.nc > ># > ># FSL hourly summary and 6-minute RASS profiler data %Y%m%d_%H00 > ># FSL.NetCDF.NOAAnet.RASS.06min.20052731424 > >FSL2 ^FSL\.NetCDF\.NOAAnet\.RASS\.(01hr|06min)\.(....)(...)(..) > > FILE > > data/pub/native/profiler/RASS/\1/\2%m%d/PROFILER_RASS_\1_\2%m%d_\400.nc > ># > ># profiler data in BUFR format > >HRS ^(IUPT0[1-4]|IUAK01) .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/profiler/bufr/profiler/PROFILER_(\2:yyyy)(\2:mm)\2_0000.bufr > ># > ># > ># profiler data in BUFR format > >HRS ^IUPT41 KBOU ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/profiler/bufr/profiler1/PROFILER_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># > ># profiler data in BUFR format > >HRS ^IUPT42 KBOU ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/profiler/bufr/profiler2/PROFILER_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># > ># profiler data in BUFR format > >HRS ^IUPT43 KBOU ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/profiler/bufr/profiler3/PROFILER_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># profiler data in BUFR format > >HRS ^ISAT.. KBOU ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/profiler/bufr/profiler4/PROFILER_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># profiler data in BUFR format > >HRS ^IUPC0[12] .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/profiler/bufr/profiler5/PROFILER_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># RADAR grid products > ># > >HRS ^HAXA00 K... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/radar/10km_mosaic/(\1:yyyy)(\1:mm)\1/RADAR_10km_mosaic_(\1:yyyy)(\1:mm)\1_\2\3.grib1 > ># > ># DPA (SDUS8.) > >HRS ^SDUS8. (....) ([0-3][0-9])([0-2][0-9])([0-9][0-9]).*/pDPA > > FILE > > > > data/pub/native/radar/level3/DPA/\1/Level3_\1_DPA_(\2:yyyy)(\2:mm)\2_0000.dpa > ># > >data/pub/native/radar/level3/DPA/\1/(\2:yyyy)(\2:mm)\2/Level3_\1_DPA_(\2:yyyy)(\2:mm)\2_0000.dpa > ># > ># RCM (SDUS4.) > >#HRS ^SDUS4. (....) ([0-3][0-9])([0-2][0-9])([0-9][0-9]).*/pRCM > ># FILE > ># > >data/pub/native/radar/level3/RCM/\1/Level3_\1_RCM_(\2:yyyy)(\2:mm)\2_0000.rcm > ># > >data/pub/native/radar/level3/RCM/\1/(\2:yyyy)(\2:mm)\2/Level3_\1_RCM_(\2:yyyy)(\2:mm)\2_0000.rcm > ># > ># 1 km Regional N0R Composite - Creates PNG-compressed AREA for FNEXRAD feed > >#FNEXRAD ^radar_mosaic_regional_(...) > ># PIPE -close > ># util/mcgribdec \1 > >/data/ldm/pub/native/radar/national/radar_regional.grib1 6100 > ># > ># 6 km National N0R Composite - Creates PNG-compressed AREA for FNEXRAD feed > >#FNEXRAD ^radar_mosaic_national > ># PIPE -close > ># util/mcgribdec NAT > >/data/ldm/pub/native/radar/national/radar_national.grib1 6200 > ># > ># 10 km National RCM Composite - Creates PNG-compressed AREA for FNEXRAD feed > >#HRS ^HAXA00 K... > ># PIPE -close > ># util/mcgribdec RCM > >/data/ldm/pub/native/radar/national/radar_national_rcm.grib1 > ># > ># > ># Model files in grib1 format > ># > ># GFS/AVN grid output > ># Grid #201 N. Hemisphere 381km: ^Y.A... KWBC.*/m(AVN|GFS|SSIAVN|SSIGFS) > ># Grid #202 CONUS 191km: ^Y.I... KWBC.*/m(AVN|GFS|SSIAVN|SSIGFS) > ># Grid #203 Alaska 191km: ^Y.J... KWBC.*/m(AVN|GFS|SSIAVN|SSIGFS) > ># Grid #211 CONUS 80km: ^Y.Q... KWBC.*/m(AVN|GFS|SSIAVN|SSIGFS) > ># Grid #213 CONUS 95km: ^Y.H... KWBC.*/m(AVN|GFS|SSIAVN|SSIGFS) > ># Select any/all grids desired from [QAIJH] > ># > >HRS ^[YZ].(A)... KWB. ([0-3][0-9])([0-2][0-9]).*/m(AVN|GFS|SSIAVN|SSIGFS) > > FILE > > > > data/pub/native/grid/NCEP/GFS/N_Hemisphere_381km/GFS_N_Hemisphere_381km_(\2:yyyy)(\2:mm)\2_\300.grib1 > >HRS ^[YZ].(I)... KWB. ([0-3][0-9])([0-2][0-9]).*/m(AVN|GFS|SSIAVN|SSIGFS) > > FILE > > > > data/pub/native/grid/NCEP/GFS/CONUS_191km/GFS_CONUS_191km_(\2:yyyy)(\2:mm)\2_\300.grib1 > >HRS ^[YZ].(J)... KWB. ([0-3][0-9])([0-2][0-9]).*/m(AVN|GFS|SSIAVN|SSIGFS) > > FILE > > > > data/pub/native/grid/NCEP/GFS/Alaska_191km/GFS_Alaska_191km_(\2:yyyy)(\2:mm)\2_\300.grib1 > >HRS ^[YZ].(Q)... KWB. ([0-3][0-9])([0-2][0-9]).*/m(AVN|GFS|SSIAVN|SSIGFS) > > FILE > > > > data/pub/native/grid/NCEP/GFS/CONUS_80km/GFS_CONUS_80km_(\2:yyyy)(\2:mm)\2_\300.grib1 > >HRS ^[YZ].(H)... KWB. ([0-3][0-9])([0-2][0-9]).*/m(AVN|GFS|SSIAVN|SSIGFS) > > FILE > > > > data/pub/native/grid/NCEP/GFS/CONUS_95km/GFS_CONUS_95km_(\2:yyyy)(\2:mm)\2_\300.grib1 > ># > ># GFS grid on thinned grids, global 1.25 regular grid > >HRS ^H.[I-P]... KWB. (..)(..).*/m(AVN|SSIAVN|GFS|SSIGFS) > > FILE > > > > data/pub/native/grid/NCEP/GFS/Global_1p25deg/GFS_Global_1p25deg_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > ># Spectral Global grid - made up of grids I-P that are thinned grids > >HRS ^H.[I-P]... KWB[^K] ([0-3][0-9])([0-2][0-9]) > > FILE > > > > data/pub/native/grid/NCEP/GFS/Spectral_1p25deg/GFS_Spectral_1p25deg_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > >#Ensemble members > >HRS ^H.[I-P]... KWBK ([0-3][0-9])([0-2][0-9]) > > FILE > > > > data/pub/native/grid/NCEP/GFS/Ensemble_1p25deg/GFS_Ensemble_1p25deg_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > ># Grid #204 Hawaii 160km: ^Y.K... KWBH > ># Grid #205 Puerto Rico 191km: ^Y.L... KWBH > ># > >HRS ^[YZ].(K)... KWBH ([0-3][0-9])([0-2][0-9]) > > FILE > > > > data/pub/native/grid/NCEP/GFS/Hawaii_160km/GFS_Hawaii_160km_(\2:yyyy)(\2:mm)\2_\300.grib1 > >HRS ^[YZ].(L)... KWBH ([0-3][0-9])([0-2][0-9]) > > FILE > > > > data/pub/native/grid/NCEP/GFS/Puerto_Rico_191km/GFS_Puerto_Rico_191km_(\2:yyyy)(\2:mm)\2_\300.grib1 > ># > ># GFS grid - Extended range grids E and F > ># > >HRS ^H.[EF][A-Z][0-9][0-9] KWB. ([0-3][0-9])([0-2][0-9]).. > > FILE > > > > data/pub/native/grid/NCEP/GFS/Extended_Global_5p0deg/GFS_Extended_Global_5p0deg_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > ># ETA/NAM grids > ># Grid #207 95km Alaska: ^[YZ].N.*/m(ETA|NAM) > ># Grid #211 80km CONUS: ^[YZ].Q.*/m(ETA|NAM) > ># Grid #212 40km CONUS: ^[YZ].R.*/m(ETA|NAM) > ># Grid #215 20km CONUS: ^[YZ].U.*/m(ETA|NAM) > ># Grid #216 45km Alaska: ^[YZ].V.*/m(ETA|NAM) > ># Grid #217 22km Alaska: ^[YZ].Y.*/m(ETA|NAM) > ># Select any/all grids desired from [QRUT] > >HRS ^[YZ].(N)... KWB. ([0-3][0-9])([0-2][0-9]).*/m(ETA|NAM) > > FILE > > > > data/pub/native/grid/NCEP/NAM/Alaska_95km/NAM_Alaska_95km_(\2:yyyy)(\2:mm)\2_\300.grib1 > >HRS ^[YZ].(Q)... KWB. ([0-3][0-9])([0-2][0-9]).*/m(ETA|NAM) > > FILE > > > > data/pub/native/grid/NCEP/NAM/CONUS_80km/NAM_CONUS_80km_(\2:yyyy)(\2:mm)\2_\300.grib1 > >HRS ^[YZ].(R)... KWB. ([0-3][0-9])([0-2][0-9]).*/m(ETA|NAM) > > FILE > > > > data/pub/native/grid/NCEP/NAM/CONUS_40km/noaaport/NAM_CONUS_40km_noaaport_(\2:yyyy)(\2:mm)\2_\300.grib1 > >HRS ^[YZ].(U)... KWB. ([0-3][0-9])([0-2][0-9]).*/m(ETA|NAM) > > FILE > > > > data/pub/native/grid/NCEP/NAM/CONUS_20km/noaaport/NAM_CONUS_20km_noaaport_(\2:yyyy)(\2:mm)\2_\300.grib1 > >HRS ^[YZ].(V)... KWB. ([0-3][0-9])([0-2][0-9]).*/m(ETA|NAM) > > FILE > > > > data/pub/native/grid/NCEP/NAM/Alaska_45km/noaaport/NAM_Alaska_45km_noaaport_(\2:yyyy)(\2:mm)\2_\300.grib1 > >HRS ^[YZ].(Y)... KWB. ([0-3][0-9])([0-2][0-9]).*/m(ETA|NAM) > > FILE > > > > data/pub/native/grid/NCEP/NAM/Alaska_22km/NAM_Alaska_22km_(\2:yyyy)(\2:mm)\2_\300.grib1 > ># > ># RUC grid output > ># Grid #211 CONUS 80km: ^[YZ].Q.*/mRUC > ># Grid #236 CONUS 40km: ^[YZ].W.*/mRUC > ># > >HRS ^[YZ].(Q)... KWB. ([0-3][0-9])([0-2][0-9]).*/mRUC > > FILE > > > > data/pub/native/grid/NCEP/RUC/CONUS_80km/RUC_CONUS_80km_(\2:yyyy)(\2:mm)\2_\300.grib1 > >HRS ^[YZ].(W)... KWB. ([0-3][0-9])([0-2][0-9]).*/mRUC > > FILE > > > > data/pub/native/grid/NCEP/RUC/CONUS_40km/RUC_CONUS_40km_(\2:yyyy)(\2:mm)\2_\300.grib1 > ># > ># RUC2 grid on Lambert conformal CONUS grid > >HRS ^Y.W... KWB. (..)(..).*/mRUC2 > > FILE > > > > data/pub/native/grid/NCEP/RUC2/CONUS_40km/RUC2_CONUS_40km_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > ># Spectral Global grid - made up of grids A,B,C,D Forecasts (wind, waves, > >temp) > >HRS ^H[A-Z][ABCD][A-Z][0-9][0-9] KWB. ([0-3][0-9])([0-2][0-9]).. > > FILE > > > > data/pub/native/grid/NCEP/SPECTRAL/Global_5x2p5deg/SPECTRAL_Global_5x2p5deg_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > ># ocean grid > ># > >HRS ^H[HKLTUV][T-W][ACEIK]93 KWB. ([0-3][0-9])([0-2][0-9]) > > FILE > > > > data/pub/native/grid/NCEP/OCEAN/Global_2x2deg/OCEAN_Global_2x2deg_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > ># NOW and PWAV grids on global 5.0 x 2.5 degree grids > >HRS ^H.[A-D]... .... (..)(..).*(/mNOW|/mPWAV) > > FILE > > > > data/pub/native/grid/NCEP/OCEAN/Global_5x2p5deg/OCEAN_Global_5x2p5deg_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > ># SST grid on global 5.0 x 2.5 degree grids > >HRS ^H.[A-D]... .... (..)(..).*/mSST > > FILE > > > > data/pub/native/grid/NCEP/SST/Global_5x2p5deg/SST_Global_5x2p5deg_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > ># SST grid on global 2.0 x 2.0 degree grid > >HRS ^H.[T-W]... .... (..)(..).*/mSST > > FILE > > > > data/pub/native/grid/NCEP/SST/Global_2x2deg/SST_Global_2x2deg_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > ># ECMWF grid on global 2.5 x 2.5 degree grid > >HRS ^H.[A-L]... ECMF (..)(..) > > FILE > > > > data/pub/native/grid/ECMWF/Global_2p5/ECMWF_Global_2p5_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > ># ECMWF GRIB products, decode into yymmdd_ecmf#.gem (e1=global,e2=+/-35lat) > ># > >#HRS ^H[RHPT][A-L][A-Z][0-9][0-9] ECMF ([0-3][0-9])([0-2][0-9]) > ># FILE > ># data/pub/native/grid/ECMWF/model_xx/ECMWF1_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > >#HRS ^H[UV][A-L][A-Z][0-9][0-9] ECMF ([0-3][0-9])([0-2][0-9]) > ># FILE > ># data/pub/native/grid/ECMWF/model_xx/ECMWF2_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > ># Global UKMet thinned grids > >HRS ^H.[I-P]... EGRR ([0-3][0-9])([0-2][0-9]) > > FILE > > data/pub/native/grid/UKMET/thin/UKMET_(\1:yyyy)(\1:mm)\1_\200.grib1 > ># > ># other soundings and surface products in BUFR format > ># > ># NCEP NAM MODEL BUFR SOUNDING > ># JUSA41 JUSA42 JUSB43 JUSB44 JUSB45 JUSB46 JUSX47 ? JUSX48 JUSX49 KWNO > >HRS ^JUS.41 KWNO ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/soundings/NAM41/SoundingNAM_(\1:yyyy)(\1:mm)\1_\200.bufr > >HRS ^JUS.42 KWNO ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/soundings/NAM42/SoundingNAM_(\1:yyyy)(\1:mm)\1_\200.bufr > >HRS ^JUS.43 KWNO ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/soundings/NAM43/SoundingNAM_(\1:yyyy)(\1:mm)\1_\200.bufr > >HRS ^JUS.44 KWNO ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/soundings/NAM44/SoundingNAM_(\1:yyyy)(\1:mm)\1_\200.bufr > >HRS ^JUS.45 KWNO ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/soundings/NAM45/SoundingNAM_(\1:yyyy)(\1:mm)\1_\200.bufr > >HRS ^JUS.46 KWNO ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/soundings/NAM46/SoundingNAM_(\1:yyyy)(\1:mm)\1_\200.bufr > >HRS ^JUS.47 KWNO ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/soundings/NAM47/SoundingNAM_(\1:yyyy)(\1:mm)\1_\200.bufr > >HRS ^JUS.48 KWNO ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/soundings/NAM48/SoundingNAM_(\1:yyyy)(\1:mm)\1_\200.bufr > >HRS ^JUS.49 KWNO ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/soundings/NAM49/SoundingNAM_(\1:yyyy)(\1:mm)\1_\200.bufr > ># > ># NCEP GFS MODEL BUFR SOUNDING > ># JUSA41 JUSA42 JUSB43 JUSB44 JUSB45 JUSB46 JUSX47 JUSX48 JUSX49 KWBC > >HRS ^JUS.4. KWBC ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/soundings/GFS/SoundingVerticalGFS_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># > ># Surface data (satellite) > ># > >HRS ^ISXT.. KBOU ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/surface/satellite/SurfaceSatellite_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># > ># Surface data (satellite) > ># > >HRS ^(ISXX0.|FPAK79|SXUS..|SFUS41|SACN..|PEIK98) .... > >([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/surface/satellite1/SurfaceSatellite_(\2:yyyy)(\2:mm)\2_0000.bufr > ># > ># Surface data (satellite) > ># > >HRS ^ISZ.59 .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/surface/satellite2/SurfaceSatellite_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># Surface data (satellite) > ># > >HRS ^ISXA.. .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/surface/satellite3/SurfaceSatellite_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># > ># Surface data (satellite) > ># > >HRS ^(ISXX0.|FPAK79|SXUS..|SFUS41|SACN..|PEIK98) .... > >([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/surface/satellite1/SurfaceSatellite_(\2:yyyy)(\2:mm)\2_0000.bufr > ># > ># Single level upper-air data (other than satellite) > ># > >HRS ^IUA... (CWAO|EGRR) ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/soundings/singlelevel/aircraft/SoundingSingleLevelAircraft_(\2:yyyy)(\2:mm)\2_0000.bufr > ># > ># Vertical soundings (other than satellite) > >HRS ^IUS[TX].[68] KWBC ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/soundings/vertical/radiosonde8/SoundingVerticalRadiosonde_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># > ># Vertical soundings (other than satellite) > >HRS ^IUS[TX].2 KWBC ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/soundings/vertical/radiosonde2/SoundingVerticalRadiosonde_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># > ># Vertical soundings (other than satellite) > >HRS ^IUS[TX].[13] KWBC ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/soundings/vertical/radiosonde3/SoundingVerticalRadiosonde_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># > ># Vertical soundings (other than satellite) > >HRS ^IUS[TX].4 KWBC ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/soundings/vertical/radiosonde4/SoundingVerticalRadiosonde_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># Single level upper-air data (satellite) > >HRS ^J.CX.1 KNES ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/soundings/singlelevel/satellite/SoundingSingleLevelSatellite_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># > ># Single level upper-air data (satellite) > >HRS ^(IUCN[45678]|IUCS[5678]|JHCX1|JRCX7). .... > >([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/soundings/singlelevel/satellite1/SoundingSingleLevelSatellite_(\2:yyyy)(\2:mm)\2_0000.bufr > ># > ># Surface data - land > ># > >HRS ^JSAT.. KKCI ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/surface/land/SurfaceLand_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># Vertical soundings (satellite) > >HRS ^JUTX.. KNES ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/soundings/vertical/satellite/SoundingVerticalSatellite_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># > ># Vertical soundings (satellite) > >HRS ^IUTX.. .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/soundings/vertical/satellite1/SoundingVerticalSatellite_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># Vertical soundings (other than satellite) > >HRS ^IXUS68 PACR ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/soundings/vertical/wind_profiler/SoundingVerticalWindProfiler_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># Synoptic data feature 7 > >HRS ^JUVE.. KKCI ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/synoptic/feature7/SynopticFeature7_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># Synoptic data feature 6 > >HRS ^JUCE.. .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/synoptic/feature6/SynopticFeature6_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># Synoptic data feature 5 > >HRS ^JUFE.. .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/synoptic/feature5/SynopticFeature5_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># Synoptic data feature 4 > >HRS ^(YUZI96 KWBC|JUBE99 ....) ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/synoptic/feature4/SynopticFeature4_(\2:yyyy)(\2:mm)\2_0000.bufr > ># > ># Synoptic data feature 3 > >HRS ^JUVE.. EGRR ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/synoptic/feature3/SynopticFeature3_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># Synoptic data feature 2 > >HRS ^JUTE.. .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/synoptic/feature2/SynopticFeature2_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># Synoptic data feature 1 > >HRS ^JUWE.. .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > > > data/pub/native/synoptic/feature1/SynopticFeature1_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > >HRS ^JUVE.. .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/other/JUV/JUV_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > >HRS ^IUPC0. .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/other/IUPC/IUPC_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > >HRS ^JSMT.. .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/other/JSMT/JSMT_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > >HRS ^JU[JOMN]E00 .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/other/JUE/JUE_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > >HRS ^JSML1. .... ([0-3][0-9])([0-2][0-9])([0-9][0-9]) > > FILE > > data/pub/native/other/JSML1/JSML1_(\1:yyyy)(\1:mm)\1_0000.bufr > ># > ># Other NMC assorted binary products > >HRS ^_ELSE_$ > > FILE > > data/pub/native/other/hrs/%Y%m%d_%H_HRS.wmo > ># > ># CMC GEM grid data > >CMC > >CMC_GEM_reg_.*_.*_([12][0-9][0-9][0-9])([0-1][0-9])([0-3][0-9])([0-2][0-9])_(.*).grib > > FILE data/pub/native/grid/CMC/GEM/GEM_\1\2\3_\400.grib1 > ># > ># FNMOC data available via IDD (NOGAPS & COAMPS grids) > ># ------------------------- > >FNMOC ^US058....-.......(0058)_...._.........(....)(..)(..)(..)_(.*) > > FILE data/pub/native/grid/FNMOC/NOGAPS/NOGAPS_\2\3\4_\5_\1_\6 > >FNMOC > >^US058....-.......([^0]...|0[^0]..|00[^5].|005[^8])_...._.........(....)(..)(..)(..)_(.*) > > FILE data/pub/native/grid/FNMOC/COAMPS/COAMPS_\2\3\4_\5_\1_\6 > ># > ># WSETA > >SPARE ^(20........)/(model_center.dat) > > FILE -close data/pub/native/grid/UNIDATA/WSETA/\1_\2 > >SPARE ^rad/floater/(..........)/(n0r_........_....) > > FILE -close data/pub/native/grid/UNIDATA/WSETA/n0r/\1/WSETA_\2 > ># > ># > ># NPORT > ># > >NPORT ^[LM].B... KWBE ([0-3][0-9])([0-2][0-9])([0-6][0-9]) > > FILE > > data/pub/native/grid/NCEP/NAM/CONUS_12km/NAM_CONUS_12km_(\1:yyyy)(\1:mm)\1_\200.grib2 > >NPORT ^[LM].S... KWBE ([0-3][0-9])([0-2][0-9])([0-6][0-9]) > > FILE > > data/pub/native/grid/NCEP/NAM/Alaska_11km/NAM_Alaska_11km_(\1:yyyy)(\1:mm)\1_\200.grib2 > >NPORT ^[LM].E... KWBD ([0-3][0-9])([0-2][0-9])([0-6][0-9]) > > FILE > > data/pub/native/grid/NCEP/DGEX/CONUS_12km/DGEX_CONUS_12km_(\1:yyyy)(\1:mm)\1_\200.grib2 > >NPORT ^[LM].F... KWBD ([0-3][0-9])([0-2][0-9])([0-6][0-9]) > > FILE > > data/pub/native/grid/NCEP/DGEX/Alaska_12km/DGEX_Alaska_12km_(\1:yyyy)(\1:mm)\1_\200.grib2 > >NPORT ^[LM].U... KWBN ([0-3][0-9])([0-2][0-9])([0-6][0-9]) > > FILE > > data/pub/native/grid/NCEP/NDFD/CONUS_5km/NDFD_CONUS_5km_(\1:yyyy)(\1:mm)\1_\200.grib2 > >#NPORT ^[LM].I... KWBJ ([0-3][0-9])([0-2][0-9])([0-6][0-9]) > ># FILE > >data/pub/native/grid/NCEP/NCEP/GFS/CONUS_191km/GFS_CONUS_191km_(\1:yyyy)(\1:mm)\1_\200.grib2 > ># > ># > ># surface data in netCDF format > ># > ># metar decoder, creates NetCDF files formated Surface_METAR_yyyymmdd_hh00.nc > ># All aviation reports including metar tests. old netcdf file format > >DDS|IDS ^S(A....|P....|XUS8.) .... ([0-3][0-9]) > > PIPE decoders/metar2nc > > etc/metar.cdl > > data/pub/decoded/netcdf/surface/metarold > ># > ># metar decoder, creates NetCDF files with new CDL format on a daily basis > ># formated data/decoded/yyyymmdd_metar.nc > >DDS|IDS ^S(A....|P....|XUS8.) .... ([0-3][0-9]) > > PIPE decoders/metar2nc.new1 > > etc/metar.cdl.new1 > > data/pub/decoded/netcdf/surface/metar > ># > ># upper air perl decoder > >DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9]) > > PIPE decoders/ua2nc > > etc/raob.cdl > > data/pub/decoded/netcdf/upperair > ># > ># buoy reports in yymmddhh_buoy.nc decoded into NetCDF format > >DDS|IDS ^S[NS].... .... ([0-3][0-9]) > > PIPE decoders/buoy2nc > > e,cdl > > data/pub/decoded/netcdf/surface/buoy > ># > ># Synoptic reports in yymmddhh_syn.nc decoded into NetCDF format > >DDS|IDS ^SM.... .... ([0-3][0-9]) > > PIPE decoders/syn2nc > > etc/syn.cdl > > data/pub/decoded/netcdf/surface/synoptic > ># > ># grid data in netCDF format > ># > ># GFS grid on Lambert conformal CONUS grid replacing avn-q > >HRS ^Y.Q... KWB. (..)(..).*/m(AVN|SSIAVN|GFS|SSIGFS) > > PIPE decoders/gribtonc > > etc/gfs_211.cdl > > > > data/pub/decoded/netcdf/grid/NCEP/GFS/CONUS_80km/GFS_CONUS_80km_(\1:yyyy)(\1:mm)\1_\200.nc > ># > ># GFS grid on thinned grids, interpolated to global 5.0 x 2.5 regular grid > >HRS ^H.[I-P]... KWB. (..)(..).*/m(AVN|SSIAVN|GFS|SSIGFS) > > PIPE decoders/gribtonc > > -q "lin,dlat=2.5,dlon=5.0" etc/gfs_37-44.cdl > > > > data/pub/decoded/netcdf/grid/NCEP/GFS/Global_5x2p5deg/GFS_Global_5x2p5deg_(\1:yyyy)(\1:mm)\1_\200.nc > ># > ># ECMWF grid on global 2.5 x 2.5 degree grid > >HRS ^H.[A-L]... ECMF (..)(..) > > PIPE decoders/gribtonc > > etc/ecmwf_1-12.cdl > > > > data/pub/decoded/netcdf/grid/ECMWF/Global_2p5/ECMWF_Global_2p5_(\1:yyyy)(\1:mm)\1_\200.nc > ># > ># ETA grid on Lambert conformal CONUS grid > >HRS ^[YZ].Q... KWB. (..)(..).*/m(ETA|NAM) > > PIPE decoders/gribtonc > > etc/eta_211.cdl > > > > data/pub/decoded/netcdf/grid/NCEP/NAM/CONUS_80km/NAM_CONUS_80km_(\1:yyyy)(\1:mm)\1_\200.nc > ># > ># GFS grid on global 5.0 x 5.0 degree grid > >HRS ^H.[EF]... KWB. (..)(..) > > PIPE decoders/gribtonc > > etc/gfs_25-26.cdl > > > > data/pub/decoded/netcdf/grid/NCEP/GFS/Extended_Global_5p0deg/GFS_Extended_Global_5p0deg_(\1:yyyy)(\1:mm)\1_\200.nc > ># > ># NGM grid on Lambert conformal CONUS grid > >#HRS ^Y.Q... KWB. (..)(..).*/mNGM > ># PIPE decoders/gribtonc > ># etc/ngm_211.cdl > ># > >data/pub/decoded/netcdf/grid/NCEP/NGM/CONUS_80km/NGM_CONUS_80km_(\1:yyyy)(\1:mm)\1_\200.nc > ># > ># NOW and PWAV grids on global 5.0 x 2.5 degree grids > >HRS ^H.[A-D]... .... (..)(..).*(/mNOW|/mPWAV) > > PIPE decoders/gribtonc > > etc/ocean_21-24.cdl > > > > data/pub/decoded/netcdf/grid/NCEP/OCEAN/Global_5x2p5deg/OCEAN_Global_5x2p5deg_(\1:yyyy)(\1:mm)\1_\200.nc > ># > ># RUC grid on Lambert conformal CONUS grid > >HRS ^[YZ].Q... KWB. (..)(..).*/mRUC > > PIPE decoders/gribtonc > > etc/ruc_211.cdl > > > > data/pub/decoded/netcdf/grid/NCEP/RUC/CONUS_80km/RUC_CONUS_80km_(\1:yyyy)(\1:mm)\1_\200.nc > ># > ># RUC2 grid on Lambert conformal CONUS grid > >HRS ^Y.W... KWB. (..)(..).*/mRUC2 > > PIPE decoders/gribtonc > > etc/ruc2_236.cdl > > > > data/pub/decoded/netcdf/grid/NCEP/RUC2/CONUS_40km/RUC2_CONUS_40km_(\1:yyyy)(\1:mm)\1_\200.nc > ># > ># SST grid on global 5.0 x 2.5 degree grids > >HRS ^H.[A-D]... .... (..)(..).*/mSST > > PIPE decoders/gribtonc > > etc/sst_21-24.cdl > > > > data/pub/decoded/netcdf/grid/NCEP/SST/Global_5x2p5deg/SST_Global_5x2p5deg_(\1:yyyy)(\1:mm)\1_\200.nc > ># > ># SST grid on global 2.0 x 2.0 degree grid > >HRS ^H.[T-W]... .... (..)(..).*/mSST > > PIPE decoders/gribtonc > > etc/sst_61-64.cdl > > > > data/pub/decoded/netcdf/grid/NCEP/SST/Global_2x2deg/SST_Global_2x2deg_(\1:yyyy)(\1:mm)\1_\200.nc > ># > ># png compressed NEXRAD Level III radar composites in GINI format > >#FNEXRAD ^rad/NEXRCOMP/(...)/(...)_(........)_(....) > ># FILE > ># > >data/pub/native/radar/composite/\2/\1/\3/Level3_Composite_\2_\1_\3_\4.gini > ># > ># > ># NOAAPORT GINI Images > ># > ># png compressed NEXRAD Level III radar composites in GINI format > >FNEXRAD ^rad/NEXRCOMP/(...)/(...)_(........)_(....) > > PIPE -close > > util/pngg2gini -vl logs/ldm-mcidas.log > > > > data/pub/native/radar/composite/\2/\1/\3/Level3_Composite_\2_\1_\3_\4.gini > ># > ># end of pqact.thredds > ># > ># > >#PCWS ^FSL\.NetCDF\.ACARS\.QC\.(...........) > ># FILE -close data/ucar_only/decoded/netcdf/acars/\1/\1.nc > > > > > >------------------------------------------------------------------------ > > > ># CONDUIT data directory structure > ># > ># pub > ># pub/native > ># pub/native/grid > ># pub/native/grid/NCEP > ># > ># pub/native/grid/NCEP/GFS/Global_0p5deg > ># pub/native/grid/NCEP/GFS/Global_onedeg > ># pub/native/grid/NCEP/GFS/Global_2p5deg > ># > ># pub/native/grid/NCEP/RUC2/CONUS_20km/hybrid > ># pub/native/grid/NCEP/RUC2/CONUS_20km/pressure > ># pub/native/grid/NCEP/RUC2/CONUS_20km/surface > ># > ># pub/native/grid/NCEP/NAM/Alaska_45km/conduit > ># pub/native/grid/NCEP/NAM/CONUS_20km/selectsurface > ># pub/native/grid/NCEP/NAM/CONUS_20km/surface > ># pub/native/grid/NCEP/NAM/CONUS_40km/conduit > ># pub/native/grid/NCEP/NAM/Polar_90km > ># > ># pub/native/grid/NCEP/GFS/Global_1p0deg_Ensemble > ># pub/native/grid/NCEP/GFS/Global_2p5deg_Ensemble > ># > ># CONDUIT Data actions > ># > ># GFS grids > ># example product > >#/afs/.nwstg.nws.noaa.gov/ftp/SL.us008001/ST.opnl/MT.gfs_CY.12/RD.20041213/PT.grid_DF.gr1/fh.0078_tl.press_gr.onedeg > >#!grib2/ncep/AVN/#000/200412131200/F6900/RELH/3300-10000 SGMA! > ># > ># GFS grids Global_0p5, Global_onedeg, and Global_2p5 grids > >CONDUIT > >MT.gfs_CY.(..)/RD.(........)/PT.grid_DF.gr([12])/(fh.....)_tl.press_gr.(......) > > FILE -close > > data/pub/native/grid/NCEP/GFS/Global_\5/GFS_Global_\5_\2_\100.grib\3 > ># > ># RUC2 grids > ># > ># hybrid > >CONDUIT > >MT.ruc_CY.(..)/RD.(........)/PT.grid_DF.gr1/(fh.....)_tl.press_gr.bgrib20 > > FILE -close > > data/pub/native/grid/NCEP/RUC2/CONUS_20km/hybrid/RUC2_CONUS_20km_hybrid_\2_\100.grib1 > ># > ># surface > >CONDUIT > >MT.ruc_CY.(..)/RD.(........)/PT.grid_DF.gr1/(fh.....)_tl.press_gr.sgrib20 > > FILE -close > > data/pub/native/grid/NCEP/RUC2/CONUS_20km/surface/RUC2_CONUS_20km_surface_\2_\100.grib1 > ># > ># pressure > >CONDUIT > >MT.ruc_CY.(..)/RD.(........)/PT.grid_DF.gr1/(fh.....)_tl.press_gr.us20km > > FILE -close > > data/pub/native/grid/NCEP/RUC2/CONUS_20km/pressure/RUC2_CONUS_20km_pressure_\2_\100.grib1 > ># > ># NAM grids > ># > ># example product > >#/afs/.nwstg.nws.noaa.gov/ftp/SL.us008001/ST.opnl/MT.nam_CY.12/RD.20050813/PT.grid_DF.gr1/fh.0027_tl.press_gr.awipak > > !grib/ncep/ETA_84/#216/200508131200/F027/HGT/sfc! 000009 > ># > ># Alaska_45km > >CONDUIT > >MT.nam_CY.(..)/RD.(........)/PT.grid_DF.gr1/(fh.....)_tl.press_gr.(......) > >!grib/ncep/ETA_84/#216 > > FILE -close > > data/pub/native/grid/NCEP/NAM/Alaska_45km/conduit/NAM_Alaska_45km_conduit_\2_\100.grib1 > ># > ># selectsurface > >CONDUIT > >MT.nam_CY.(..)/RD.(........)/PT.grid_DF.gr1/(fh.....)_tl.press_gr.icwf20 > >!grib/ncep/ETA_84/#215 > > FILE -close > > data/pub/native/grid/NCEP/NAM/CONUS_20km/selectsurface/NAM_CONUS_20km_selectsurface_\2_\100.grib1 > ># > ># surface > >CONDUIT > >MT.nam_CY.(..)/RD.(........)/PT.grid_DF.gr1/(fh.....)_tl.press_gr.awip20 > >!grib/ncep/ETA_84/#215 > > FILE -close > > data/pub/native/grid/NCEP/NAM/CONUS_20km/surface/NAM_CONUS_20km_surface_\2_\100.grib1 > ># > ># conduit feed > >CONDUIT > >MT.nam_CY.(..)/RD.(........)/PT.grid_DF.gr1/(fh.....)_tl.press_gr.(......) > >!grib/ncep/ETA_84/#212 > > FILE -close > > data/pub/native/grid/NCEP/NAM/CONUS_40km/conduit/NAM_CONUS_40km_conduit_\2_\100.grib1 > ># > ># Polar_90km > >CONDUIT > >MT.nam_CY.(..)/RD.(........)/PT.grid_DF.gr1/(fh.....)_tl.press_gr.(......) > >!grib/ncep/ETA_84/#104 > > FILE -close > > data/pub/native/grid/NCEP/NAM/Polar_90km/NAM_Polar_90km_\2_\100.grib1 > ># > ># MRF Ensemble grids > ># > ># example products > >#/afs/.nwstg.nws.noaa.gov/ftp/SL.us008001/ST.opnl/MT.ensg_CY.12/RD.20050812/PT.grid_DF.gr1/fh.xxxx_tl.press_pa.z1000 > > !grib/ncep/AVN/#002/200508121200/F300/HGT/1000_mb! 000040 > ># > >/afs/.nwstg.nws.noaa.gov/ftp/SL.us008001/ST.opnl/MT.ensg_CY.12/RD.20050812/PT.grid_DF.gr1/fh.xxxx_tl.press_pa.z1000 > > !grib/ncep/SPEC_62_MRF/#002/200508121200/F006/HGT/1000_mb! 000049 > ># > ># Global_1p0deg_Ensemble > >CONDUIT > >MT.ensg_CY.(..)/RD.(........)/PT.grid_DF.gr1/(fh.xxxxhr)_tl.press_pa.(.*) > >!grib > > FILE -close > > data/pub/native/grid/NCEP/GFS/Global_1p0deg_Ensemble/GFS_Global_1p0deg_Ensemble_\2_\100.grib1 > ># > ># Global_2p5deg_Ensemble > >CONDUIT > >MT.ensg_CY.(..)/RD.(........)/PT.grid_DF.gr1/(fh.xxxx)_tl.press_pa.(.*) !grib > > FILE -close > > data/pub/native/grid/NCEP/GFS/Global_2p5deg_Ensemble/GFS_Global_2p5deg_Ensemble_\2_\100.grib1 > ># > ># > >#NMC2|SPARE ^.status\.(.*) [0-9][0-9][0-9][0-9][0-9][0-9] > ># FILE -close data/pub/native/other/conduit/status/\1 > ># > ># Soundings Products > ># > ># GFS soundings > >#CONDUIT > >MT.gfs_CY.(..)/RD.(........)/PT.sndn_DF.bufr/(fh.....)_tl.press_gr.(......) > ># FILE -close > >data/pub/native/grid/NCEP/GFS/Global_\5/GFS_Global_\5_\2_\100.grib\3 > > > > > >------------------------------------------------------------------------ > > > ># > ># This pqact defines the directory structure expected by the THREDDS Data > >Server > ># default configuration. It includes the pqact entries using decoders and > >FILE > ># actions to create the structure. If this pqact is implemented then the > ># THREDDS Data Server should work without doing any data structure > ># configurations. Default configuration starting at the ~ldm/data directory: > ># > ># pub > ># pub/native > ># pub/native/radar/level2/{station}/{day} > ># pub/native/radar/level3/{day}/{station}/{product} > ># > ># > ># level2 radar from CRAFT feed > ># > >CRAFT > >^L2-BZIP2/(....)/([0-9][0-9][0-9][0-9][0-1][0-9][0-3][0-9])([0-2][0-9][0-5][0-9])([0-9][0-9]) > > FILE data/pub/native/radar/level2/\1/\2/Level2_\1_\2_\3.ar2v > ># > ># level3 radar from NEXRAD feedtype > ># > >NNEXRAD ^SDUS[2357]. .... > >([0-3][0-9])([0-2][0-9])([0-6][0-9]).*/p(...)(...) > > FILE -close > > data/pub/native/radar/level3/\4/\5/(\1:yyyy)(\1:mm)\1/Level3_\5_\4_(\1:yyyy)(\1:mm)\1_\2\3.nids > ># > > > > > >------------------------------------------------------------------------ > > > ># > ># Configuration file for "manageFilesDirs.pl" utility. > ># > ># This utility manages the number of files in a directory structure. > ># > ># @param startdir the directory where to start managing > ># @param pattern the pattern to match files or directories, yyyymmdd is a > ># place holder for year, month, day directories > ># @param number the number of days of data to keep > ># > ># Once the script matches the pattern, it deletes the files or directories > >and > ># then returns to the directory up one level. It skips files or directories > ># that are links and prints out a message on files or directories that no > ># action was taken on it. > ># > ># Each line consists of a directory, a pattern, and the number of days to > >retain. > ># > ># Directory pattern days > ># > >/data/ldm/pub/native/surface/metar yyyymmdd 7 > >/data/ldm/pub/native/surface/land bufr 7 > >/data/ldm/pub/native/surface/satellite bufr > >7 > >/data/ldm/pub/native/surface/satellite1 bufr > >7 > >/data/ldm/pub/native/surface/satellite2 bufr > >7 > >/data/ldm/pub/native/surface/satellite3 bufr > >7 > >/data/ldm/pub/native/soundings bufr > >7 > >/data/ldm/pub/native/synoptic bufr > >7 > >/data/ldm/pub/native/profiler/bufr bufr 7 > >/data/ldm/pub/native/satellite yyyymmdd > >7 > >/data/ldm/pub/native/radar/level2 yyyymmdd 7 > >/data/ldm/pub/native/radar/level3 yyyymmdd 7 > >/data/ldm/pub/native/radar/level3/DPA dpa > >7 > >/data/ldm/pub/native/radar/composite yyyymmdd 7 > >/data/ldm/pub/native/radar/10km_mosaic yyyymmdd > >7 > >/data/ldm/pub/native/profiler/RASS yyyymmdd 7 > >/data/ldm/pub/native/profiler/wind yyyymmdd 7 > >/data/ldm/pub/native/nwstg/text yyyymmdd > >7 > >/data/ldm/pub/native/other/hrs HRS.wmo > >7 > >/data/ldm/pub/native/other bufr 7 > >/data/ldm/pub/native/conduit RD.20 2 > >/data/ldm/pub/native/grid/CMC grib.$ > >7 > >/data/ldm/pub/native/grid/ECMWF grib.$ > >7 > >/data/ldm/pub/native/grid/NCEP grib.$ > >7 > >/data/ldm/pub/native/grid/UKMET grib.$ > >7 > >/data/ldm/pub/native/grid/UNIDATA/WSETA/n0r yyyymmdd 7 > ># > >/data/ldm/pub/decoded/netcdf/surface Surface 7 > >/data/ldm/pub/decoded/netcdf/upperair Upperair > >7 > >/data/ldm/pub/decoded/netcdf/grid nc$ 7 > ># > > > > > >------------------------------------------------------------------------ > > > >#!/usr/bin/perl > ># > ># Name: manageFileDirs.pl > ># > ># Author: Robb Kambic > ># Date : Sept 2, 2005 > ># > ># Purpose: manage files in a directory sturcture. > ># > ># Description: > ># > ># @param startdir the directory where to start managing > ># @param pattern the pattern to match files or directories, yyyymmdd is a > ># place holder for year, month, day directories > ># @param number the number of days to keep > ># > ># @param configuration file that has the above parameters on one line. > ># > ># Once the script matches the pattern, it deletes the files or directories > >and > ># then returns to the directory up one level. It skips files or directories > ># that are links and prints out a message on files or directories that no > ># action was taken on it. > ># > ># process command line switches > > > >while ($_ = $ARGV[0], /^-/) { > > shift; > > last if /^--$/; > > /^-D(.*)/ && ($debug = $1); > > /^(-v)/ && $verbose++; > > /^(-d)/ && ( $startDir = shift ) ; > > /^(-p)/ && ( $pattern = shift ) ; > > /^(-n)/ && ( $number = shift ) ; > > /^(-f)/ && ( $conf = shift ) ; > >} > ># configuration file given to process > >if( defined( $conf ) ) { > > print "Start ", `/bin/date`; > > open( CONF, "$conf" ) || die "cannot open $conf $!"; > > while( <CONF> ) { > > next if( /^#/ ); > > chop(); > > ( $startDir, $pattern, $number ) = split( /\s+/, $_ ); > > next if( $pattern eq "" || $number eq "" ); > > startChecking(); > > } > > close CONF; > > print "End ", `/bin/date`; > >} else { > > exit 1 if( $pattern eq "" || $number eq "" ); > > print "Start ", `/bin/date`; > > startChecking(); > > print "End ", `/bin/date`; > >} > > > >sub startChecking { > > > >if( ! -d $startDir ) { > > print "$startDir doesn't exist\n"; > > return; > >} > >chdir( $startDir ); > >if( $pattern =~ /yyyymmdd/i ) { > > $pattern = "^\\d{8}"; # pattern set to 8 digits > >} > >opendir( TOP, $startDir ) || die "cannot open $startDir $!"; > >( @TOP ) = readdir( TOP ); > >closedir( TOP ); > >checkDirs( @TOP ); > > > >} # end startChecking > > > ># checkDirs is a recursive routine used to walk the directory structure in a > ># depth first search for the designated pattern. Once the pattern is found, > >it > ># removes the files/directories in excess of the days to keep. After > >deleting > ># files or directories matching the pattern, the routine returns up one > ># directory level. > ># > >sub checkDirs{ > > > >my ( @INODES ) = @_; > >local( $i, $j, $delete, @subINODES ); > > > >#print "currently in ", `pwd`; > >for( $i = 0; $i <= $#INODES; $i++ ) { > > # skip ., .., and links > > next if( $INODES[ $i ] =~ /^\.$|^\.\.$/ || -l $INODES[ $i ] ); > > if( $INODES[ $i ] =~ /$pattern/ ) { > > print `/bin/date`; > > print "currently in ", `pwd`; > > # just manage files/dirs matching pattern > > $delete = ""; > > for( $j = 0; $j <= $#INODES; $j++ ) { > > next if( $INODES[ $j ] =~ /^\.$|^\.\.$/ || -l $INODES[ > > $j ] ); > > next unless ( $INODES[ $j ] =~ /$pattern/ && -M > > $INODES[ $j ] > $number ); > > $delete = $delete . " $INODES[ $j ]"; > > # if grib file delete gbx index and inventory too > > if( $INODES[ $j ] =~ /grib.$/ ) { > > $delete = $delete . " $INODES[ $j ]" . ".gbx"; > > $delete = $delete . " $INODES[ $j ]" . > > ".fmrInv.xml"; > > } > > # if bufr file delete bfx index too > > if( $INODES[ $j ] =~ /bufr$/ ) { > > $delete = $delete . " $INODES[ $j ]" . ".bfx"; > > } > > } > > if( $delete ne "" ) { > > print "`/bin/rm -r $delete`\n"; > > `/bin/rm -r $delete`; > > } > > #print "currently in ", `pwd`; > > return; > > } elsif( -d $INODES[ $i ] ) { > > opendir( DIR, $INODES[ $i ] ) || > > die "cannot open $INODES[ $i ] $!"; > > ( @subINODES ) = readdir( DIR ); > > closedir( DIR ); > > chdir( $INODES[ $i ] ); > > #print "currently in ", `pwd`; > > checkDirs( @subINODES ); > > chdir( ".." ); > > #print "currently in ", `pwd`; > > } elsif( $INODES[ $i ] =~ /\.scour/ ) { > > print "`/bin/rm $INODES[ $i ]`\n"; > > `/bin/rm $INODES[ $i ]`; > > } else { > > print "currently in ", `pwd`; > > print "No action taken on $INODES[ $i ]\n"; > > } > >} > >} # end checkDirs > > > > > > > -- > > Dr. Christopher G. Herbster > Associate Professor > Director of Science and Technology > for the ERAU Weather Center > Applied Aviation Sciences > Embry-Riddle Aeronautical Univ. > 600 S. Clyde Morris Blvd. > Daytona Beach, FL 32114-3900 > > 386.226.6444 Office > 386.226.6446 Weather Center > http://wx.erau.edu/ > > > ============================================================================== Robb Kambic Unidata Program Center Software Engineer III Univ. Corp for Atmospheric Research rkambic@xxxxxxxxxxxxxxxx WWW: http://www.unidata.ucar.edu/ ==============================================================================
decoders archives: