[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
[McIDAS #UGD-896576]: IMGREMAP of GOES-16 for use in GEMPAK
- Subject: [McIDAS #UGD-896576]: IMGREMAP of GOES-16 for use in GEMPAK
- Date: Thu, 01 Feb 2018 15:54:32 -0700
Hi Robert,
I ran your IMGREMAP command (slightly adjusted for output ADDE dataset);
displayed the result in McIDAS-X; and verified that McIDAS returns fully
calibrated values when the image is interrogated:
IMGREMAP RTGOESR/CONUSC13 MYDATA/IMAGES.3000 RES=2 PRO=MERC SIZE=ALL
***********************************************
* WARNING *
* The entire source image will be used to *
* create the destination image. If the source *
* image is located on a remote server, the *
* total number of bytes transfered will be: *
* 3.75 MB *
***********************************************
Beginning Image Data transfer, bytes= 3753076
IMGREMAP: transformations complete ... begin data move
Transferring AREA data outbound, bytes= 16321312
IMGREMAP: Done...
LWU LIST AREA3000 0 64
0. 0 4 HEX: 0 4 ASCII:
2. 186 118032 HEX: BA 1CD10 ASCII:
4. 222226 6202 HEX: 36412 183A ASCII: d :
6. 6421 0 HEX: 1915 0 ASCII:
8. 2976 5484 HEX: BA0 156C ASCII: l
10. 1 1 HEX: 1 1 ASCII:
12. 1 1 HEX: 1 1 ASCII:
14. 0 0 HEX: 0 0 ASCII:
16. 118032 223018 HEX: 1CD10 3672A ASCII: *g
18. 4096 0 HEX: 1000 0 ASCII:
20. 0 0 HEX: 0 0 ASCII:
22. 0 0 HEX: 0 0 ASCII:
24. 1397051207 1126191661 HEX: 53454F47 4320522D ASCII: GOES -R C
26. 1398107759 0 HEX: 53556E6F 0 ASCII: onUS
28. 0 0 HEX: 0 0 ASCII:
30. 0 0 HEX: 0 0 ASCII:
32. 3000 768 HEX: BB8 300 ASCII:
34. 256 0 HEX: 100 0 ASCII:
36. 0 0 HEX: 0 0 ASCII:
38. 0 0 HEX: 0 0 ASCII:
40. 0 0 HEX: 0 0 ASCII:
42. 0 0 HEX: 0 0 ASCII:
44. 0 0 HEX: 0 0 ASCII:
46. 0 0 HEX: 0 0 ASCII:
48. 0 0 HEX: 0 0 ASCII:
50. 0 1381189974 HEX: 0 52534956 ASCII: VISR
52. 1414091330 0 HEX: 54495242 0 ASCII: BRIT
54. 0 0 HEX: 0 0 ASCII:
56. 1313423937 0 HEX: 4E494241 0 ASCII: ABIN
58. 0 0 HEX: 0 0 ASCII:
60. 0 0 HEX: 0 0 ASCII:
62. 0 2 HEX: 0 2 ASCII:
64. 1129465165 0 HEX: 4352454D 0 ASCII: MERC
--END OF LISTING
IMGDISP MYDATA/IMAGES.3000
Beginning Image Data transfer, bytes= 1410928
IMGDISP: loaded frame 1
IMGDISP: done
Image Name Day Nominal Time Scan Time Band
---------------- ------- ------------ --------- ----
MYDATA/IMAGES.3000 1 Feb 18032 22:22:26 MISSING 13
File Nominal Image RAW TEMP BRIT
Lat/Lon Line/Element Line/Element K
51:21:52/ 133:16:33 455/ 1008 6657/ 7429 193 225.00
193
IMGPROBE: Done
A quick look at the listing of AREA file header word values suggests
where GEMPAK is failing:
50. 0 1381189974 HEX: 0 52534956 ASCII: VISR
52. 1414091330 0 HEX: 54495242 0 ASCII: BRIT
54. 0 0 HEX: 0 0 ASCII:
56. 1313423937 0 HEX: 4E494241 0 ASCII: ABIN
58. 0 0 HEX: 0 0 ASCII:
60. 0 0 HEX: 0 0 ASCII:
Word 56 in the LWU listing is the 4-character ASCII text string ABIN.
McIDAS uses this word as the key to know which calibration module
to use to convert pixel values into calibrated units.
The Unidata-Wisconsin GOES-East image sectors are created by IMGREMAPping
an RTGOESR full disk image into an existing GVAR image. The result
of this is word 56 being GVAR, not ABIN:
IMGCOPY RTIMAGES/GE-IR MYDATA/IMAGES.3001 SIZE=SAME
Beginning Image Data transfer, bytes= 4724568
Transferring AREA data outbound, bytes= 4724648
IMGCOPY: RTIMAGES/GE-IR.96 copied to MYDATA/IMAGES.3001
IMGCOPY: done
LWU LIST AREA3001 0 64
0. 0 4 HEX: 0 4 ASCII:
2. 180 118032 HEX: B4 1CD10 ASCII:
4. 221545 2605 HEX: 36169 A2D ASCII: ia -
6. 9017 0 HEX: 2339 0 ASCII: 9#
8. 2726 1732 HEX: AA6 6C4 ASCII:
10. 1 4 HEX: 1 4 ASCII:
12. 8 1 HEX: 8 1 ASCII:
14. 0 0 HEX: 0 0 ASCII:
16. 118032 223827 HEX: 1CD10 36A53 ASCII: Sj
18. 8 0 HEX: 8 0 ASCII:
20. 0 0 HEX: 0 0 ASCII:
22. 0 0 HEX: 0 0 ASCII:
24. 1193301074 5390678 HEX: 47205452 524156 ASCII: RT G VAR
26. 0 0 HEX: 0 0 ASCII:
28. 0 0 HEX: 0 0 ASCII:
30. 0 0 HEX: 0 0 ASCII:
32. 3001 2816 HEX: BB9 B00 ASCII:
34. 256 0 HEX: 100 0 ASCII:
36. 0 0 HEX: 0 0 ASCII:
38. 0 0 HEX: 0 0 ASCII:
40. 0 0 HEX: 0 0 ASCII:
42. 0 0 HEX: 0 0 ASCII:
44. 0 118008 HEX: 0 1CCF8 ASCII:
46. 71519 356 HEX: 1175F 164 ASCII: _ d
48. 0 0 HEX: 0 0 ASCII:
50. 0 1381189974 HEX: 0 52534956 ASCII: VISR
52. 1414091330 2 HEX: 54495242 2 ASCII: BRIT
54. 0 0 HEX: 0 0 ASCII:
56. 1380013639 538976288 HEX: 52415647 20202020 ASCII: GVAR
58. 1 0 HEX: 1 0 ASCII:
60. 0 0 HEX: 0 0 ASCII:
62. 0 5 HEX: 0 5 ASCII:
64. 1380013639 0 HEX: 52415647 0 ASCII: GVAR
--END OF LISTING
My (educated) guess is that GEMPAK understands GVAR calibration. I
know that GEMPAK does not understand ABIN calibration, so the reason
that no calibrated value of TEMPerature is shown in GEMPAK is that
it doesn't understand how to convert image pixel values into TEMPeratures.
Now, one can tweak the AREA file to indicate that it has GVAR
calibration using the LWU command:
LWU POKE AREA3000 GVAR 56 TYPE=ASCII
Value was: 1313423937 HEX: 4E494241 ASCII: ABIN
LWU LIST AREA3000 0 64
0. 0 4 HEX: 0 4 ASCII:
2. 186 118032 HEX: BA 1CD10 ASCII:
4. 222226 6202 HEX: 36412 183A ASCII: d :
6. 6421 0 HEX: 1915 0 ASCII:
8. 2976 5484 HEX: BA0 156C ASCII: l
10. 1 1 HEX: 1 1 ASCII:
12. 1 1 HEX: 1 1 ASCII:
14. 0 0 HEX: 0 0 ASCII:
16. 118032 223018 HEX: 1CD10 3672A ASCII: *g
18. 4096 0 HEX: 1000 0 ASCII:
20. 0 0 HEX: 0 0 ASCII:
22. 0 0 HEX: 0 0 ASCII:
24. 1397051207 1126191661 HEX: 53454F47 4320522D ASCII: GOES -R C
26. 1398107759 0 HEX: 53556E6F 0 ASCII: onUS
28. 0 0 HEX: 0 0 ASCII:
30. 0 0 HEX: 0 0 ASCII:
32. 3000 768 HEX: BB8 300 ASCII:
34. 256 0 HEX: 100 0 ASCII:
36. 0 0 HEX: 0 0 ASCII:
38. 0 0 HEX: 0 0 ASCII:
40. 0 0 HEX: 0 0 ASCII:
42. 0 0 HEX: 0 0 ASCII:
44. 0 0 HEX: 0 0 ASCII:
46. 0 0 HEX: 0 0 ASCII:
48. 0 0 HEX: 0 0 ASCII:
50. 0 1381189974 HEX: 0 52534956 ASCII: VISR
52. 1414091330 0 HEX: 54495242 0 ASCII: BRIT
54. 0 0 HEX: 0 0 ASCII:
56. 1380013639 0 HEX: 52415647 0 ASCII: GVAR
58. 0 0 HEX: 0 0 ASCII:
60. 0 0 HEX: 0 0 ASCII:
62. 0 2 HEX: 0 2 ASCII:
64. 1129465165 0 HEX: 4352454D 0 ASCII: MERC
--END OF LISTING
After this change, McIDAS will use the GVAR calibration to return
TEMPerature values:
LWU POKE AREA3000 GVAR 56 TYPE=ASCII
The question then becomes how the GVAR calibration compares with the
ABIN calibration?
Here is the comparison of calibrations for 4 randomly chosen points in
the image:
LWU COPY AREA3000 AREA3001
AREA3000 Copied to AREA3001
LWU LIST AREA3000 0 64
...
50. 0 1381189974 HEX: 0 52534956 ASCII: VISR
52. 1414091330 0 HEX: 54495242 0 ASCII: BRIT
54. 0 0 HEX: 0 0 ASCII:
56. 1313423937 0 HEX: 4E494241 0 ASCII: ABIN
58. 0 0 HEX: 0 0 ASCII:
...
--END OF LISTING
LWU LIST AREA3001 0 64
...
50. 0 1381189974 HEX: 0 52534956 ASCII: VISR
52. 1414091330 0 HEX: 54495242 0 ASCII: BRIT
54. 0 0 HEX: 0 0 ASCII:
56. 1313423937 0 HEX: 4E494241 0 ASCII: ABIN
58. 0 0 HEX: 0 0 ASCII:
...
--END OF LISTING
LWU POKE AREA3001 GVAR 56 TYPE=ASCII
Value was: 1313423937 HEX: 4E494241 ASCII: ABIN
LWU LIST AREA3001 0 64
...
50. 0 1381189974 HEX: 0 52534956 ASCII: VISR
52. 1414091330 0 HEX: 54495242 0 ASCII: BRIT
54. 0 0 HEX: 0 0 ASCII:
56. 1380013639 0 HEX: 52415647 0 ASCII: GVAR
58. 0 0 HEX: 0 0 ASCII:
...
--END OF LISTING
SF 1;IMGDISP MYDATA/IMAGES.3000
Beginning Image Data transfer, bytes= 1410928
IMGDISP: loaded frame 1
IMGDISP: done
SF 2;IMGDISP MYDATA/IMAGES.3001
Beginning Image Data transfer, bytes= 1410928
IMGDISP: loaded frame 2
IMGDISP: done
LB 1 2
Image Frame= 1 2
Dwell= 2 2
LB: Done
Image Name Day Nominal Time Scan Time Band
---------------- ------- ------------ --------- ----
MYDATA/IMAGES.3000 1 Feb 18032 22:22:26 MISSING 13
File Nominal Image RAW TEMP BRIT
Lat/Lon Line/Element Line/Element K
53:26:09/ 134:27:42 266/ 942 6468/ 7363 195 223.00
195
IMGPROBE: Done
Image Name Day Nominal Time Scan Time Band
---------------- ------- ------------ --------- ----
MYDATA/IMAGES.3001 1 Feb 18032 22:22:26 MISSING 13
File Nominal Image RAW TEMP BRIT
Lat/Lon Line/Element Line/Element K
53:26:09/ 134:27:42 266/ 942 6468/ 7363 195 223.00
195
IMGPROBE: Done
Image Name Day Nominal Time Scan Time Band
---------------- ------- ------------ --------- ----
MYDATA/IMAGES.3000 1 Feb 18032 22:22:26 MISSING 13
File Nominal Image RAW TEMP BRIT
Lat/Lon Line/Element Line/Element K
51:38:38/ 130:46:43 430/ 1147 6632/ 7568 188 230.00
188
IMGPROBE: Done
Image Name Day Nominal Time Scan Time Band
---------------- ------- ------------ --------- ----
MYDATA/IMAGES.3001 1 Feb 18032 22:22:26 MISSING 13
File Nominal Image RAW TEMP BRIT
Lat/Lon Line/Element Line/Element K
51:38:38/ 130:46:43 430/ 1147 6632/ 7568 188 230.00
188
IMGPROBE: Done
Image Name Day Nominal Time Scan Time Band
---------------- ------- ------------ --------- ----
MYDATA/IMAGES.3000 1 Feb 18032 22:22:26 MISSING 13
File Nominal Image RAW TEMP BRIT
Lat/Lon Line/Element Line/Element K
48:53:19/ 133:20:52 670/ 1004 6872/ 7425 118 271.00
118
IMGPROBE: Done
Image Name Day Nominal Time Scan Time Band
---------------- ------- ------------ --------- ----
MYDATA/IMAGES.3001 1 Feb 18032 22:22:26 MISSING 13
File Nominal Image RAW TEMP BRIT
Lat/Lon Line/Element Line/Element K
48:53:19/ 133:20:52 670/ 1004 6872/ 7425 118 271.00
118
IMGPROBE: Done
Image Name Day Nominal Time Scan Time Band
---------------- ------- ------------ --------- ----
MYDATA/IMAGES.3000 1 Feb 18032 22:22:26 MISSING 13
File Nominal Image RAW TEMP BRIT
Lat/Lon Line/Element Line/Element K
46:20:46/ 125:53:30 880/ 1419 7082/ 7840 183 235.00
183
IMGPROBE: Done
Image Name Day Nominal Time Scan Time Band
---------------- ------- ------------ --------- ----
MYDATA/IMAGES.3001 1 Feb 18032 22:22:26 MISSING 13
File Nominal Image RAW TEMP BRIT
Lat/Lon Line/Element Line/Element K
46:20:46/ 125:53:30 880/ 1419 7082/ 7840 183 235.00
183
IMGPROBE: Done
So, for the 4 randomly chosen locations, the returned TEMPeratures were
identical. Quite frankly, I am surprised by this, but what the hey!
So, I am suggesting that you add changing AREA header word 56 to GVAR
right after you create an image using IMGREMAP:
imgremap.k RTGOESR/CONUSC13 TEMP/IMAGES.1 RES=2 PRO=MERC SIZE=ALL
lwu.k POKE AREA???? GVAR 56 TYPE=ASCII
(I don't know how you defined your TEMP/IMAGES dataset, so I can't say
what the AREA file name that the result of the IMGREMAP was written into.)
Cheers,
Tom
--
****************************************************************************
Unidata User Support UCAR Unidata Program
(303) 497-8642 P.O. Box 3000
address@hidden Boulder, CO 80307
----------------------------------------------------------------------------
Unidata HomePage http://www.unidata.ucar.edu
****************************************************************************
Ticket Details
===================
Ticket ID: UGD-896576
Department: Support McIDAS
Priority: Normal
Status: Closed
===================
NOTE: All email exchanges with Unidata User Support are recorded in the Unidata
inquiry tracking system and then made publicly available through the web. If
you do not want to have your interactions made available in this way, you must
let us know in each email you send to us.
