>From: Eirh-Yu Hsie <address@hidden>
>Organization: CU/CIRES NOAA/ESRL
>Keywords: 200512091601.jB9G1w7s009532 McIDAS Solaris 10
Hi Hsie,
re:
>You can ssh into cirrus then to hail (temporary
>name). After I satisfy with the setup, I will switch the name to
>stratus. It seems work now, but I am not sure of it. If you can, please
>take a look. You can issue:
>
>% svcs
>
>to see the services. "svc:/network/mcidas", "svc:/network/mcserv", and
>"svc:/network/mccompress" are all online.
OK. I was able to logon successfully.
Access to the remote ADDE server does not seem to work. Here is
what I did to ascertain this:
<login as 'mcidas'>
cd solaris/workdata
I found that the 'mcidas' account is looking at the remote adde
server on stratus for most datasets:
dataloc.k LIST
Group Name Server IP Address
-------------------- ----------------------------------------
AMRC UWAMRC.SSEC.WISC.EDU
BLIZZARD STRATUS.AL.NOAA.GOV
CIMSS STRATUS.AL.NOAA.GOV
GINICOMP STRATUS.AL.NOAA.GOV
GINIEAST STRATUS.AL.NOAA.GOV
GINIWEST STRATUS.AL.NOAA.GOV
GOESEAST STRATUS.AL.NOAA.GOV
ME7 IO.SCA.UQAM.CA
MYDATA <LOCAL-DATA>
NEXRCOMP STRATUS.AL.NOAA.GOV
RTGRIDS STRATUS.AL.NOAA.GOV
RTIMAGES STRATUS.AL.NOAA.GOV
RTNEXRAD STRATUS.AL.NOAA.GOV
RTPTSRC STRATUS.AL.NOAA.GOV
RTWXTEXT STRATUS.AL.NOAA.GOV
TOPO STRATUS.AL.NOAA.GOV
<LOCAL-DATA> indicates that data will be accessed from the local data directory.
DATALOC -- done
This works OK showing that the code built under Solaris 10 is working.
I then verified that dataset definitions were setup on hail:
dsserve.k LIST RTIMAGES
Group/Descriptor Type Format & Range RT Comment
------------------------ ----- ------------------ -- --------------------
RTIMAGES/ANTARCTIC IMAGE AREA Antarctic IR Composite
DIRFILE=/wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_*
RTIMAGES/EDFLOATER-I IMAGE AREA Educational Floater
DIRFILE=/wrk/data/sat/mcidas/GOES-*_fl1/*/*/*
RTIMAGES/EDFLOATER-II IMAGE AREA Educational Floater II
DIRFILE=/wrk/data/sat/mcidas/GOES-*_fl2/*/*/*
RTIMAGES/GE-39 IMAGE AREA GOES-East Hemispheric Short
IR
DIRFILE=/wrk/data/sat/mcidas/GOES-12/4km/3.9/3.9_*
RTIMAGES/GE-CO2 IMAGE AREA GOES-East Hemispheric CO2
DIRFILE=/wrk/data/sat/mcidas/GOES-12/4km/13.3/13.3_*
RTIMAGES/GE-IR IMAGE AREA GOES-East Hemispheric IR
DIRFILE=/wrk/data/sat/mcidas/GOES-12/4km/IR/IR_*
RTIMAGES/GE-IRTOPO IMAGE AREA 220-229 GOES-East IR/TOPO Composite
RTIMAGES/GE-VIS IMAGE AREA GOES-East Hemispheric VIS
DIRFILE=/wrk/data/sat/mcidas/GOES-12/4km/VIS/VIS_*
...
I then verified that the data is in the directories specified in
the definitions above:
ls /wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_*
/wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_20051209_0000
/wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_20051209_0600
/wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_20051209_0900
/wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_20051209_1200
/wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_20051209_1800
/wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_20051209_2100
/wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_20051210_0000
/wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_20051210_0300
/wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_20051210_0600
/wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_20051210_0900
/wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_20051210_1200
/wrk/data/sat/mcidas/ANTARCTIC/4km/IR/IR_20051210_1500
Then I tried to point at the remote ADDE interface:
dataloc.k ADD RTIMAGES hail.al.noaa.gov
Group Name Server IP Address
-------------------- ----------------------------------------
RTIMAGES HAIL.AL.NOAA.GOV
<LOCAL-DATA> indicates that data will be accessed from the local data directory.
DATALOC -- done
Everything is good up until this point. Interrogating the remote
server interface in any way, however, fails:
dsinfo.k IMAGE RTIMAGES
dsinfo.k: cannot run server 'lwprserv': No such file or directory
No Datasets found of Type: IMAGE in Group: RTIMAGES
DSINFO -- done
imglist.k RTIMAGES/GE-IR
Image file directory listing for:RTIMAGES/GE-IR
imglist.k: cannot run server 'adirserv': No such file or directory
imglist.k: done
It looks like the configuation setup for the remote server access
is not correctly passing a '-H' flag whose value should be the
HOME directory of the mcadde account. In fact, nothing is being
passed to the initial ADDE executable ~mcidas/solaris/bin/mcservsh.
I have hardwared things to work by modifying ~mcidas/solaris/bin/mcservsh:
TZ=GMT
export TZ
McINST_ROOT='/home/mcidas/solaris'
case $1 in
-H) HOME="$2"
shift
shift
[ -f "$HOME/.mcenv" ] &&
. "$HOME/.mcenv"
;;
*) # <<<<< UPC add 20051210 - for Solaris 10 >>>>>
[ -f "$McINST_ROOT/.mcenv" ] &&
. "$McINST_ROOT/.mcenv"
;;
esac
It would be much better, however, to figure out how the command line
options should be passed to mcservsh using svcs.
How did you setup the services on hail?
Cheers,
Tom
--
NOTE: All email exchanges with Unidata User Support are recorded in the
Unidata inquiry tracking system and then made publicly available
through the web. If you do not want to have your interactions made
available in this way, you must let us know in each email you send to us.
NOTE: All email exchanges with Unidata User Support are recorded in the Unidata inquiry tracking system and then made publicly available through the web. If you do not want to have your interactions made available in this way, you must let us know in each email you send to us.