[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20041210: McIDAS and the NASA DAAC

Hi all,

I've been downloading a lot of Level 1B MODIS data from the NASA DAAC ftp 
site.  I'm just wondering if there's a way to use McIDAS and the DSSERVE 
command to mount the DAAC ftp site into McIDAS, and do the channel and 
spatial sub-setting directly from there, rather than downloading the 327 MB 
files and *then* doing the subsetting?

thanks,



Andrew Tupper
Senior Meteorologist
Darwin Volcanic Ash Advisory Centre
Bureau of Meteorology, Australia
Mobile / Cell Phone: + 61 (0)418-110182
Phone: +61 8 8920 3867
http://www.bom.gov.au/info/vaac


#############################################################
This message is sent to you because you are subscribed to
  the mailing list <address@hidden>.
To unsubscribe, E-mail to: <address@hidden>
To switch to the DIGEST mode, E-mail to <address@hidden>
To switch to the INDEX mode, E-mail to <address@hidden>
Send administrative queries to  <address@hidden>

        by unidata.ucar.edu (UCAR/Unidata) with ESMTP id iBA0oflI020668;
        Thu, 9 Dec 2004 17:50:41 -0700 (MST)
Organization: UCAR/Unidata
X-ListServer: CommuniGate Pro LIST 4.1.8
List-Unsubscribe: <mailto:address@hidden>
List-ID: <mcidas-users.ssec.wisc.edu>
Message-ID: <address@hidden>
Sender: "McIDAS Users list" <address@hidden>
To: "McIDAS Users list" <address@hidden>
Precedence: list
From: <address@hidden> (Jeff Wilson/BOM)
Subject: Re: McIDAS and the NASA DAAC
Date: Fri, 10 Dec 2004 11:50:24 +1100
X-Original-Message-ID: <001001c4de52$3c8acb30$address@hidden>
MIME-Version: 1.0
Content-Type: text/plain;
        charset="US-ASCII"

Hi Andrew,

My understanding is that this would be possible if the other site ran McIDAS
and were willing to serve the data to you. IE they would then have a DSSERVE
entry on their mcadde account and you would DATALOC to that dataset/machine

cheers
Jeff WIlson
10 Dec 2004


********************************************
Jeff Wilson
acting Principal
Bureau of Meteorology Training Centre
GPO Box 1289K
Melbourne VIC 3001
AUSTRALIA
tel +61 3 96694470
fax +61 3 96694366
Email address@hidden
********************************************




- -----Original Message-----
From: McIDAS Users list [mailto:address@hidden]
Sent: Friday, 10 December 2004 10:45
To: McIDAS Users list
Subject: McIDAS and the NASA DAAC


Hi all,

I've been downloading a lot of Level 1B MODIS data from the NASA DAAC ftp
site.  I'm just wondering if there's a way to use McIDAS and the DSSERVE
command to mount the DAAC ftp site into McIDAS, and do the channel and
spatial sub-setting directly from there, rather than downloading the 327 MB
files and *then* doing the subsetting?

thanks,



Andrew Tupper
Senior Meteorologist
Darwin Volcanic Ash Advisory Centre
Bureau of Meteorology, Australia
Mobile / Cell Phone: + 61 (0)418-110182
Phone: +61 8 8920 3867
http://www.bom.gov.au/info/vaac


#############################################################
This message is sent to you because you are subscribed to
  the mailing list <address@hidden>.
To unsubscribe, E-mail to: <address@hidden>
To switch to the DIGEST mode, E-mail to <address@hidden>
To switch to the INDEX mode, E-mail to <address@hidden>
Send administrative queries to  <address@hidden>


#############################################################
This message is sent to you because you are subscribed to
  the mailing list <address@hidden>.
To unsubscribe, E-mail to: <address@hidden>
To switch to the DIGEST mode, E-mail to <address@hidden>
To switch to the INDEX mode, E-mail to <address@hidden>
Send administrative queries to  <address@hidden>

        by unidata.ucar.edu (UCAR/Unidata) with ESMTP id iBA12slI021694;
        Thu, 9 Dec 2004 18:02:54 -0700 (MST)
Organization: UCAR/Unidata
X-ListServer: CommuniGate Pro LIST 4.1.8
List-Unsubscribe: <mailto:address@hidden>
List-ID: <mcidas-users.ssec.wisc.edu>
Message-ID: <address@hidden>
Sender: "McIDAS Users list" <address@hidden>
To: "McIDAS Users list" <address@hidden>
Precedence: list
Date: Thu, 09 Dec 2004 19:02:46 -0600
From: <address@hidden> (Batson, Bryan)
Subject: Re: McIDAS and the NASA DAAC
X-Original-Message-id: <address@hidden>
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii

At the 2004 MUG meeting, Dave Santek discussed the possibility of
non-McIDAS sites using ADDE to serve data without having a full McIDAS
installation. Perhaps the MODIS DAAC would be a candidate for this
service?

Bryan Batson

- -----Original Message-----
From: McIDAS Users list [mailto:address@hidden]
Sent: Thursday, December 09, 2004 6:50 PM
To: McIDAS Users list
Subject: Re: McIDAS and the NASA DAAC


Hi Andrew,

My understanding is that this would be possible if the other site ran
McIDAS
and were willing to serve the data to you. IE they would then have a
DSSERVE
entry on their mcadde account and you would DATALOC to that
dataset/machine

cheers
Jeff WIlson
10 Dec 2004


********************************************
Jeff Wilson
acting Principal
Bureau of Meteorology Training Centre
GPO Box 1289K
Melbourne VIC 3001
AUSTRALIA
tel +61 3 96694470
fax +61 3 96694366
Email address@hidden
********************************************




- -----Original Message-----
From: McIDAS Users list [mailto:address@hidden]
Sent: Friday, 10 December 2004 10:45
To: McIDAS Users list
Subject: McIDAS and the NASA DAAC


Hi all,

I've been downloading a lot of Level 1B MODIS data from the NASA DAAC
ftp
site.  I'm just wondering if there's a way to use McIDAS and the DSSERVE
command to mount the DAAC ftp site into McIDAS, and do the channel and
spatial sub-setting directly from there, rather than downloading the 327
MB
files and *then* doing the subsetting?

thanks,



Andrew Tupper
Senior Meteorologist
Darwin Volcanic Ash Advisory Centre
Bureau of Meteorology, Australia
Mobile / Cell Phone: + 61 (0)418-110182
Phone: +61 8 8920 3867
http://www.bom.gov.au/info/vaac


#############################################################
This message is sent to you because you are subscribed to
  the mailing list <address@hidden>.
To unsubscribe, E-mail to: <address@hidden>
To switch to the DIGEST mode, E-mail to
<address@hidden>
To switch to the INDEX mode, E-mail to
<address@hidden>
Send administrative queries to  <address@hidden>


#############################################################
This message is sent to you because you are subscribed to
  the mailing list <address@hidden>.
To unsubscribe, E-mail to: <address@hidden>
To switch to the DIGEST mode, E-mail to
<address@hidden>
To switch to the INDEX mode, E-mail to
<address@hidden>
Send administrative queries to  <address@hidden>


#############################################################
This message is sent to you because you are subscribed to
  the mailing list <address@hidden>.
To unsubscribe, E-mail to: <address@hidden>
To switch to the DIGEST mode, E-mail to <address@hidden>
To switch to the INDEX mode, E-mail to <address@hidden>
Send administrative queries to  <address@hidden>

        by unidata.ucar.edu (UCAR/Unidata) with ESMTP id iBA4OilI012294;
        Thu, 9 Dec 2004 21:24:44 -0700 (MST)
Organization: UCAR/Unidata
X-ListServer: CommuniGate Pro LIST 4.1.8
List-Unsubscribe: <mailto:address@hidden>
List-ID: <mcidas-users.ssec.wisc.edu>
Message-ID: <address@hidden>
Sender: "McIDAS Users list" <address@hidden>
To: "McIDAS Users list" <address@hidden>
Precedence: list
X-Original-Message-ID: <address@hidden>
Date: Thu, 09 Dec 2004 22:24:20 -0600
From: <address@hidden> (Dave Santek)
Subject: Re: McIDAS and the NASA DAAC
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Andrew & all,

We do have ADDE servers at the DAAC for access to near real-time data 
[the last few days]. But, they may have some IP address restrictions in 
place. Also, they're running older versions of the servers, so you need 
to use an undocumented option to get to the data: You need to append 
MCC=500 to all your ADDE commands.

DATALOC ADD GDAAC   G0DUG03U.ECS.NASA.GOV

==========================
If you're interested in real-time data, there is another server:
    DATALOC ADD NANUK  NANUK.EOSDIS.NASA.GOV

This one should have open access, and you don't need to add MCC=500 to 
your commands. They may not be running at the same processing version at 
the DAAC, but the data are available within a few hours, instead of 
delayed by about a day.
==========================
One other point: there is another error in the server where the 
satellite number is incorrect for Aqua MODIS. You will need to do an 
IMGCHA to correct this after you copy the data.

[it's very difficult to update these servers, so we've had to live with 
these shortcomings]

dave

(Batson, Bryan) wrote:

>At the 2004 MUG meeting, Dave Santek discussed the possibility of
>non-McIDAS sites using ADDE to serve data without having a full McIDAS
>installation. Perhaps the MODIS DAAC would be a candidate for this
>service?
>
>Bryan Batson
>
>-----Original Message-----
>From: McIDAS Users list [mailto:address@hidden]
>Sent: Thursday, December 09, 2004 6:50 PM
>To: McIDAS Users list
>Subject: Re: McIDAS and the NASA DAAC
>
>
>Hi Andrew,
>
>My understanding is that this would be possible if the other site ran
>McIDAS
>and were willing to serve the data to you. IE they would then have a
>DSSERVE
>entry on their mcadde account and you would DATALOC to that
>dataset/machine
>
>cheers
>Jeff WIlson
>10 Dec 2004
>
>
>********************************************
>Jeff Wilson
>acting Principal
>Bureau of Meteorology Training Centre
>GPO Box 1289K
>Melbourne VIC 3001
>AUSTRALIA
>tel +61 3 96694470
>fax +61 3 96694366
>Email address@hidden
>********************************************
>
>
>
>
>-----Original Message-----
>From: McIDAS Users list [mailto:address@hidden]
>Sent: Friday, 10 December 2004 10:45
>To: McIDAS Users list
>Subject: McIDAS and the NASA DAAC
>
>
>Hi all,
>
>I've been downloading a lot of Level 1B MODIS data from the NASA DAAC
>ftp
>site.  I'm just wondering if there's a way to use McIDAS and the DSSERVE
>command to mount the DAAC ftp site into McIDAS, and do the channel and
>spatial sub-setting directly from there, rather than downloading the 327
>MB
>files and *then* doing the subsetting?
>
>thanks,
>
>
>
>Andrew Tupper
>Senior Meteorologist
>Darwin Volcanic Ash Advisory Centre
>Bureau of Meteorology, Australia
>Mobile / Cell Phone: + 61 (0)418-110182
>Phone: +61 8 8920 3867
>http://www.bom.gov.au/info/vaac
>
>