[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20000324: XSECTG and MDX produced THAE analyses (cont.)



>From: Bill Fingerhut <address@hidden>
>Organization: Lyndon State College
>Keywords: 200003231451.HAA00534 McIDAS-X UCC PTCON XSECTG cron MDX

Bill,

>I used TFILE to capture commands from my script and the
>responses. First, I captured the output from the entire
>script. Then I boiled that down to a BATCH file that still
>produces the error. Here it is: (note, I inserted a carriage
>return in the XSECTG command to insure it shows)
>
>IGU DEL 2002
>IGU MAKE 2002
>UCC THAE 1000 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>UCC THAE 925 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>UCC THAE 850 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>UCC THAE 700 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>UCC THAE 500 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>UCC THAE 400 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>UCC THAE 300 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>UCC THAE 250 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>UCC THAE 200 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>IGU DEL 2001
>IGU COPY 2002 2001
>XSECTG GRIDS=1 2 3 4 5 6 7 8 9 LAT=45 45 LON=70 120 CINT=4 FORM=GRID MAP=YES 
>              ERASE=NO COLOR=3 TCOLOR=3 WIDTH=250 GRIDF=2001 GRA=1
>SF 1
>PC T 1 1

Super.  I clipped out these lines (taking care to reassemble the XSECTG
command into a single line) and put them into a BATCH file for testing.
I can reproduce your problem: my session gets blown away _after_ XSECTG
has finished plotting with:

Program terminated, floating point error

Since I can reproduce the problem here, I don't need your file.

I'm on the case!

>-------------------------------------------
>The responses to this BATCH file follow:
>-------------------------------------------
>
>TFILE did OPEN on window 0
>BATCH "thaex.bat
>IGU DEL 2002
> IGU DONE # 2002
>IGU: DONE
>IGU MAKE 2002
>IGU: DONE
>UCC THAE 1000 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>FILE: 2002 GRID: 1
>UCC THAE 925 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>FILE: 2002 GRID: 2
>UCC THAE 850 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>FILE: 2002 GRID: 3
>UCC THAE 700 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>FILE: 2002 GRID: 4
>UCC THAE 500 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>FILE: 2002 GRID: 5
>UCC THAE 400 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>FILE: 2002 GRID: 6
>UCC THAE 300 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>FILE: 2002 GRID: 7
>UCC THAE 250 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>FILE: 2002 GRID: 8
>UCC THAE 200 NA 12 MDF=14 DAY=2000084 GRIDF=2002 DRAW=NO
>FILE: 2002 GRID: 9
>IGU DEL 2001
> IGU DONE # 2001
>IGU: DONE
>IGU COPY 2002 2001
> DONE COPYING TO GRIDFILE #  2001
>XSECTG GRIDS=1 2 3 4 5 6 7 8 9 LAT=45 45 LON=70 120 CINT=4 FORM=GRID MAP=YES 
>                     ERASE=NO COLOR=3 TCOLOR=3 WIDTH=250 GRIDF=2001 GRA=1
>XSECTG --- BEGIN
>Stations selected:  16
>         534         560         586         612         638
>         664         690         716         742         768
>         794         820         846         872         898
>         534
>XSECTG --- DONE
>SF 1
>Program terminated, floating point error
>PC T 1 1
>BATCH: BATCH done /mnt/homes/fingerhutb/mcidas/data/thaex.bat
>TFILE CLOSE

I got almost exactly the same messages.  The only thing different for me
was that I got the Program terminated, floating point error before the
'SF 1' invocation.

>I need to talk to Mark about the ftp, I'll get back to you
>soon.

I got your second message.  I will not be FTPing your file since I can
reproduce the problem here.  I will get back to you as soon as I have
the fix.

Tom