[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20030320: FW: LDM6 running here also

Ray,

Your  clnt_create messages occurred while I was rebooting
rtstats.unidata.ucar.edu here (all out power outages this week
with 3-7 feet of snow zotted the monitor, so had to swap that out).

More importantly, your pqact messages indicate a problem with one of your
pqact.conf actions. You can send your pqact process a "kill -USR2 pid" to
put that process in verbose mode and identify which of your actions is failing.

Steve Chiswell
Unidata User SUpport

On Fri, 21 Mar 2003, Ray Weber wrote:

>
>
> Interestingly enough, it started up after a short delay,
> and products flowed in. Its definately indicating version 6 in the
> /var/log/messages file.
>
>
> Have this error in the log however:
>
> Mar 20 20:33:00 weather rtstats[1366]: clnt_create(rtstats.unidata.ucar.edu, 
> 300029, 5,
> "tcp"): rtstats.unidat
> a.ucar.edu: RPC: Program not registered
> Mar 20 20:34:08 weather last message repeated 4 times
> Mar 20 20:34:18 weather last message repeated 2 times
> Mar 20 20:35:27 weather pqact[1365]: child 8558 exited with status 1
> Mar 20 20:35:38 weather rtstats[1366]: clnt_create(rtstats.unidata.ucar.edu, 
> 300029, 5,
> "tcp"): rtstats.unidat
> a.ucar.edu: RPC: Port mapper failure - RPC: Timed out
> Mar 20 20:36:05 weather pqact[1365]: child 8135 exited with status 1
> Mar 20 20:36:30 weather pqact[1365]: child 8698 exited with status 1
> Mar 20 20:36:32 weather pqact[1365]: child 8885 exited with status 1
> Mar 20 20:36:43 weather rtstats[1366]: clnt_create(rtstats.unidata.ucar.edu, 
> 300029, 5,
> "tcp"): rtstats.unidat
> a.ucar.edu: RPC: Port mapper failure - RPC: Timed out
> Mar 20 20:37:48 weather rtstats[1366]: clnt_create(rtstats.unidata.ucar.edu, 
> 300029, 5,
> "tcp"): rtstats.unidat
> a.ucar.edu: RPC: Port mapper failure - RPC: Timed out
> Mar 20 20:38:21 weather pqact[1365]: child 9079 exited with status 1
>
>
>
> Ray
>
> > -----Original Message-----
> > From: Ray Weber [mailto:address@hidden]
> > Sent: Friday, March 21, 2003 2:39 AM
> > To: address@hidden
> > Subject: RE: LDM6 running here also
> >
> >
> > Steve, ldmadmin watch shows no incoming data either.
> >
> > nothing in /var/log/messages about an attempt to start etc...
> >
> > this is the error on start:
> >
> > [ldm@weather ~/bin]$ ldmadmin start
> > Starting the LDM server (this can take a while)...
> > hupsyslog: couldn't open /var/run/syslogd.pid
> > the LDM server has been started
> >
> >
> > /var/run/syslogd.pid exists as below:
> >
> > -rw-------    1 root     root            4 Mar 20 14:21 /var/run/syslogd.pid
> >
> >
> > obviously user ldm cannot do much with this.
> >
> > Suggestions??
> >
> > Ray
> >
> > > -----Original Message-----
> > > From: Steve Chiswell [mailto:address@hidden]
> > > Sent: Thursday, March 20, 2003 12:36 PM
> > > To: Ray Weber
> > > Subject: RE: LDM6 running here also
> > >
> > >
> > >
> > > Ray,
> > >
> > > You appear to be running LDM5.x. The stats comming in are from 5.x, and
> > > your rpcinfo shown below  only shows the ldmd for versions 4 & 5. When 
> > > running
> > > LDM 6 you would see 5 and 6.
> > >
> > > ldm% rpcinfo -p weather.ne.client2.attbi.com
> > >    program vers proto port
> > >     100000 2 tcp 111 portmapper
> > >     100000 2 udp 111 portmapper
> > >     300029 5 tcp 32768 ldmd
> > >     300029 4 tcp 32768 ldmd
> > >
> > >
> > > Did you remember to change your runtime link after upgrading? Or, did you 
> > > get
> > > the correct tarfile from the ftp site?
> > >
> > > Steve Chiswell
> > >
> > >
> > >  On Thu, 20 Mar 2003, Ray Weber wrote:
> > > > Have that already in ldmd.conf.
> > > >
> > > > Don't see me on the page yet for some reason...
> > >
> > > >
> > > > host is weather.ne.client2.attbi.com
> > > >
> > > >
> > > > Ray
> > > >
> > > > > -----Original Message-----
> > > > > From: Steve Chiswell [mailto:address@hidden]
> > > > > Sent: Wednesday, March 19, 2003 6:04 PM
> > > > > To: Ray Weber
> > > > > Subject: RE: LDM6 running here also
> > > > >
> > > > >
> > > > > Ray,
> > > > >
> > > > > In my earlier message to ldm-users, I included the line for the 
> > > > > ldmd.conf
> > > > > file which should look like:
> > > > >
> > > > > exec "rtstats -h rtstats.unidata.ucar.edu"
> > > > >
> > > > > (without the -h option, it would attempt to connect to localhost)
> > > > >
> > > > > Steve Chiswell
> > > > >
> > > > > On Thu, 20 Mar 2003, Ray Weber wrote:
> > > > >
> > > > > > What has to be done for setup??
> > > > > >
> > > > > > I get this error running it...
> > > > > >
> > > > > > [ldm@weather ~/bin]$ ./rtstats
> > > > > > could not sign on 103
> > > > > > could not sign on 103
> > > > > > [ldm@weather ~/bin]$
> > > > > >
> > > > > > Ray
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Steve Chiswell [mailto:address@hidden]
> > > > > > > Sent: Wednesday, March 19, 2003 4:55 PM
> > > > > > > To: Ray Weber
> > > > > > > Cc: Mark Tucker
> > > > > > > Subject: Re: LDM6 running here also
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Let us know if you need help setting up rtstats.
> > > > > > > Once I get a critical mass of sites, the topology maps will
> > > > > > > look a lot better.
> > > > > > >
> > > > > > > Your site here:
> > > > > > > http://www.unidata.ucar.edu/staff/chiz/rtstats/
> > > > > > >
> > > > > > > Chiz
> > > > > > >
> > > > > > > On Thu, 20 Mar 2003, Ray Weber wrote:
> > > > > > >
> > > > > > > > Heck with it, i compiled and upgraded, all up and running on 
> > > > > > > > LDM6 fine.
> > > > > > > >
> > > > > > > > >
> > > > > > > > > I'll wait if you like. I cannot log in anyway.
> > > > > > > > > Had new password sent,  new one doesnt work either.
> > > > > > > > >
> > > > > > > > > Did get the tarball from the ftp however....
> > > > > > > > >
> > > > > > > > > Some kind of major install issues steve??
> > > > > > > > >
> > > > > > > > > Ray
> > > > > > > > > MA Skywarn
> > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Mark,
> > > > > > > > > >
> > > > > > > > > > >Date: Wed, 19 Mar 2003 18:53:47 +0000
> > > > > > > > > > >From: Mark Tucker <address@hidden>
> > > > > > > > > > >Organization: Lyndon State College
> > > > > > > > > > >To: address@hidden
> > > > > > > > > > >Subject: ldm 6
> > > > > > > > > >
> > > > > > > > > > The above message contained the following:
> > > > > > > > > >
> > > > > > > > > > > Lyndon State is running LDM 6 as well.
> > > > > > > > > >
> > > > > > > > > > You guys are way fast!  I still have a bunch of stuff to do 
> > > > > > > > > > to the LDM's
> > > > > > > > > > web pages before I "officially" announce LDM-6's 
> > > > > > > > > > availability.
> > > > > > > > > >
> > > > > > > > > > If you use the LDM's web-pages and notice something wrong, 
> > > > > > > > > > please let me
> > > > > > > > > > know.
> > > > > > > > > >
> > > > > > > > > > Regards,
> > > > > > > > > > Steve Emmerson   <http://www.unidata.ucar.edu>
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
>
>