[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 20030110: Howard Univ

Hi Pavel, 

You need to act on the specific feeds not on the aliased feedtype.

What you have will not work.

Please see:

http://www.unidata.ucar.edu/packages/gempak/tutorial/pqact/decoders.tbl
and
http://www.unidata.ucar.edu/packages/gempak/examples/examples.html


Unless your data path is different, use these...if it is different than
standard install, modify the path accordingly, and then use the examples.

Thank you,

-Jeff
____________________________                  _____________________
Jeff Weber                                    address@hidden
Unidata Support                               PH:303-497-8676 
COMET Case Study Library                      FX:303-497-8690
University Corp for Atmospheric Research      3300 Mitchell Ln
http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
________________________________________      ______________________

On 14 Jan 2003, Pavel Byles wrote:

> Slightly.
> Let me know if this will work. Just not sure if what I am doing is
> correct.
> UNIDATA       ^.*/p(HDS|DDS)
>       data/gempak/UNIDATA/YYYYMMDD_uni.gem
> 
> Pavel
> 
> On Tue, 2003-01-14 at 15:16, Jeff Weber wrote:
> > Hi Pavel, 
> > 
> > Did these not work for you...?
> > 
> > -Jeff
> > ____________________________                  _____________________
> > Jeff Weber                                    address@hidden
> > Unidata Support                               PH:303-497-8676 
> > COMET Case Study Library                      FX:303-497-8690
> > University Corp for Atmospheric Research      3300 Mitchell Ln
> > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> > ________________________________________      ______________________
> > 
> > ---------- Forwarded message ----------
> > Date: Fri, 10 Jan 2003 16:16:32 -0700 (MST)
> > From: Jeff Weber <address@hidden>
> > To: Pavel Byles <address@hidden>
> > Cc: ldm-support <address@hidden>
> > Subject: Re: 20030110: Howard Univ
> > 
> > Pavel, 
> > 
> > Please see:
> > 
> > http://www.unidata.ucar.edu/packages/gempak/tutorial/pqact/decoders.tbl
> > 
> > and
> > 
> > http://www.unidata.ucar.edu/packages/gempak/examples/examples.html
> > 
> > These should be a great help to you..
> > 
> > -Jeff
> > ____________________________                  _____________________
> > Jeff Weber                                    address@hidden
> > Unidata Support                               PH:303-497-8676 
> > COMET Case Study Library                      FX:303-497-8690
> > University Corp for Atmospheric Research      3300 Mitchell Ln
> > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> > ________________________________________      ______________________
> > 
> > On 10 Jan 2003, Pavel Byles wrote:
> > 
> > > Jeff,
> > > how about the HDS in UNIDATA. From that I should be able to figure out
> > > how to store the others.
> > > 
> > > Pavel
> > > 
> > > On Fri, 2003-01-10 at 17:51, Jeff Weber wrote:
> > > > Pavel, 
> > > > 
> > > > The UNIDATA feed consists of many feedtypes.
> > > > 
> > > > See:
> > > > 
> > > > http://my.unidata.ucar.edu/content/software/ldm/feedtypes/index.html
> > > > 
> > > > So there is no single action for the UNIDATA feed.
> > > > 
> > > > We do not post these actions because everyone does things differently,
> > > > some products are not wanted by all, so they act upon the feed
> > > > differently. Also, I am not certain which application you are planning 
> > > > on
> > > > using to utilize this data, you have mentioned both MCIDAS and GEMPAK, 
> > > > so
> > > > that would create different actions as well. 
> > > > 
> > > > I am more than happy to give you any and all are actions, but it would 
> > > > be
> > > > in your best interest to know what you want first, or if disc space is 
> > > > not
> > > > an issue at all, or is latencies, you can act on everything...but I
> > > > suspect you are probably not using global metars, all the models, etc 
> > > > on a
> > > > daily basis..but I do not know.
> > > > 
> > > > If you can tell me what you are hoping to ingest/decode/file I can send
> > > > the appropriate entries...
> > > > 
> > > > Cheers,
> > > > 
> > > > -Jeff
> > > > ____________________________                  _____________________
> > > > Jeff Weber                                    address@hidden
> > > > Unidata Support                               PH:303-497-8676 
> > > > COMET Case Study Library                      FX:303-497-8690
> > > > University Corp for Atmospheric Research      3300 Mitchell Ln
> > > > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> > > > ________________________________________      ______________________
> > > > 
> > > > On 10 Jan 2003, Pavel Byles wrote:
> > > > 
> > > > > Yes, running the notifyme command shows that I am allowed on cornell's
> > > > > atm.geo.nsf.gov feed for UNIDATA.
> > > > > 
> > > > > All I need is the entry for the pqact.conf.
> > > > > 
> > > > > Thankyou
> > > > > Pavel Byles
> > > > > 
> > > > > On Thu, 2003-01-09 at 14:33, Jeff Weber wrote:
> > > > > > Pavel, 
> > > > > > 
> > > > > > Execute from ldm machine:
> > > > > > 
> > > > > > notifyme -vl - -h atm.geo.nsf.gov -f UNIDATA -o 15000
> > > > > > 
> > > > > > and let me know what you see...
> > > > > > 
> > > > > > This will let you know if you are "allowed" that feed group.
> > > > > > 
> > > > > > If you see data scrolling, then the allow is valid.
> > > > > > 
> > > > > > To see the feedtypes and aliased "feedgroups" go to:
> > > > > > 
> > > > > > http://my.unidata.ucar.edu/content/software/ldm/feedtypes/index.html
> > > > > > 
> > > > > > Thank you,
> > > > > > 
> > > > > > -Jeff
> > > > > > ____________________________                  _____________________
> > > > > > Jeff Weber                                    address@hidden
> > > > > > Unidata Support                               PH:303-497-8676 
> > > > > > COMET Case Study Library                      FX:303-497-8690
> > > > > > University Corp for Atmospheric Research      3300 Mitchell Ln
> > > > > > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> > > > > > ________________________________________      ______________________
> > > > > > 
> > > > > > On Thu, 9 Jan 2003, Byles, Pavel O wrote:
> > > > > > 
> > > > > > > Jeff,
> > > > > > > we are recieving data from atm.geo.nsf.gov. Should I change it 
> > > > > > > back to
> > > > > > > snow.nrcc.cornell.edu?
> > > > > > > We are getting both NEXRAD and UNIDATA according to the 
> > > > > > > ldmd.conf. But I
> > > > > > > don't see where the UNIDATA  data is coming in.
> > > > > > > Is that because there is no allow for us on the atm.geo.nsf.gov 
> > > > > > > server or is
> > > > > > > this incorrect:
> > > > > > > 
> > > > > > > request UNIDATA ".*" atm.geo.nsf.gov
> > > > > > > 
> > > > > > > Pavel
> > > > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > 
> > > 
> > > 
> > 
> 
> 
>