[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 20021024:Maine FNMOC NOGAPS Feed



HI Steve, 

Yes, the examples on the page should work..

I have eyeballed them again, and they match what my notifyme puts out:
Oct 24 22:49:41 notifyme[10230]:    65269 20021024214800.533   FNMOC 000
US058GMET-GR1mdl.0058_0240_00000F0OF2002102418_0001_000000-000000snw_dpth


What do you see when you do a:

notifyme -vl - -h usgodae3.fnmoc.navy.mil -f NOGAPS -o 15000


This may not be pertinent since you did indicate other data was coming in,
but is your clock right?

In regards to the pqact we have:

HDS|NMC2|NOGAPS|CMC     ^(/afs|[HOYZ]|US058)|.*CMC_GEM_reg_).*
        PIPE    decoders/dcgrib2 -d data/pub/decoded/gempak/logs/dcgrib.log -v 1
                -e GEMTBL=/home/gempak/NAWIPS/gempak/tables

Could be modified to:

NOGAPS          ^(US058*)
        PIPE    decoders/dcgrib2 -d data/pub/decoded/gempak/logs/dcgrib.log -v 1
                -e GEMTBL=/home/gempak/NAWIPS/gempak/tables

But if you are not getting these other models, or even if you are, you can
use the original..I now it works..

Keep me posted!

-Jeff
____________________________                  _____________________
Jeff Weber                                    address@hidden
Unidata Support                               PH:303-497-8676 
COMET Case Study Library                      FX:303-497-8690
University Corp for Atmospheric Research      3300 Mitchell Ln
http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
________________________________________      ______________________

On Thu, 24 Oct 2002, Unidata Support wrote:

> 
> ------- Forwarded Message
> 
> >To: address@hidden
> >cc: address@hidden,
> >cc: address@hidden,
> >cc: address@hidden
> >From: "Steve Cousins" <address@hidden>
> >Subject: Re: Fwd: Re: 20021004:Maine FNMOC NOGAPS Feed
> >Organization: UCAR/Unidata
> >Keywords: 200210241752.g9OHqsq22280
> 
> Hi Jeff,
> 
> I tried putting the following in the  pqact.conf file:
> 
> NOGAPS  ^US058....-.......(0058)_...._.........(....)(..)(..)(..)_(.*)
>         FILE    -overwrite      -close  ldm02/nogaps/\2/\3/\4/\5/\1/\6
> # COAMPS
> NOGAPS  
> ^US058....-.......([^0]...|0[^0]..|00[^5].|005[^8])_...._.........(....)(..)(..)(..)_(.*)
>         FILE    -overwrite      -close  ldm02/coamps/\2/\3/\4/\5/\1/\6
> 
> I got this from the Unidata web site.  I restarted ldm and let it run all 
> night.  Still nothing in the ldm02 directory.   The ldmd.log file still shows 
> multiple pairs of:
> 
>       Oct 24 17:22:20 rocky usgodae3[1678]: RECLASS: 20021024162220.607 
> TS_ENDT {{NOGAPS,  ".*"}} 
>       Oct 24 17:22:20 rocky usgodae3[1678]: skipped: 20021024162119.486 
> (61.120 seconds) 
> 
> I'd give the one that you supplied a try except I'm not sure what parts are 
> relevant for our needs.  Should the ones that I put in (above) work?  
> 
> Thanks for any help you can give (anyone).
> 
> Steve
> 
> address@hidden writes:
> >Hi Steve, 
> >
> >If you do not "act" on the data..i.e. via pqact, then the LDM does not
> >know what to do with it, it will sit in your queue and then go away..
> >
> >Something like this:
> >
> ># GEMPAK GRIB decoding
> >#
> >HDS|NMC2|NOGAPS|CMC     ^(/afs|[HOYZ]|US058)|.*CMC_GEM_reg_).*
> >        PIPE    decoders/dcgrib2 -d data/pub/decoded/gempak/logs/dcgrib.log 
> > -v 1
> >                -e GEMTBL=/home/gempak/NAWIPS/gempak/tables
> >
> >Is how we have it...but this is acting on ALL the models(NCEP, NCEP
> >Conduit, FNMOC, and GEM)
> >
> >
> >-Jeff
> ________________________________________________
>  Steve Cousins                        Email: address@hidden
>  Research Associate                 Phone: (207) 581-4302
>  Ocean Modeling Group           
>  School of Marine Sciences      208 Libby Hall,
>  University of Maine                Orono ME 04469
> 
> 
> 
> ------- End of Forwarded Message
> 
>