[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 20020429: ldm bind: 388: Address already in use

Dongyu, 

Great, glad to hear you are now getting data!

Let me know if and when we can help further...

Thank you,

-Jeff
____________________________                  _____________________
Jeff Weber                                    address@hidden
Unidata Support                               PH:303-497-8676 
NWS-COMET Case Study Library                  FX:303-497-8690
University Corp for Atmospheric Research      3300 Mitchell Ln
http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
________________________________________      ______________________

On Mon, 29 Apr 2002 address@hidden wrote:

> HI,Dear Jeff:
> 
>  Thank you very much for your help!
> 
>  I can receive the data again. I rebuild the queue and release the 388 
> port. Then I can receive the data again and I can watch the data using 
> the command "ldmadmin watch" again. 
> 
>  I am very appreciate your help and patience.
> 
> Dongyu
> 
> 
> ----- Original Message -----
> From: Jeff Weber <address@hidden>
> Date: Monday, April 29, 2002 2:57 pm
> Subject: Re: 20020429: ldm bind: 388: Address already in use
> 
> > Dongyu, 
> > 
> > The LDM appears to still be running..
> > 
> > Apr 29 14:51:09 rpc.ldmd[7333]: bind: 388: Address already in use
> > 
> > So you will want to stop the ldm first.
> > 
> > Do: 
> > 
> > ldmadmin stop
> > 
> > then
> > 
> > ps - ef| grep rpc
> > 
> > or 
> > 
> > ps -ef | grep ldm
> > 
> > to make sure no ldm owned processes are still active
> > 
> > then
> > 
> > ldmadmin start
> > 
> > Please let me know if this does not work, we may need to re-build the
> > queue as well..
> > 
> > Thank you,
> > 
> > -Jeff
> > ____________________________                  _____________________
> > Jeff Weber                                    address@hidden
> > Unidata Support                               PH:303-497-8676 
> > NWS-COMET Case Study Library                  FX:303-497-8690
> > University Corp for Atmospheric Research      3300 Mitchell Ln
> > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
> > ________________________________________      ______________________
> > 
> > On Mon, 29 Apr 2002, Unidata Support wrote:
> > 
> > > 
> > > 
> > > Jeff,
> > > 
> > > see problem below about restarting his LDM.
> > > 
> > > Steve
> > > 
> > > 
> > > ------- Forwarded Message
> > > 
> > > >To: Unidata Support <address@hidden>
> > > >From: <address@hidden>
> > > >Subject: Re: 20020424: Gempak installation! 
> > > >Organization: UCAR/Unidata
> > > >Keywords: 200204291502.g3TF2Ba14462
> > > 
> > > Dear Steve:
> > > 
> > >  Now my garp can run smoothly. But I met new problems. I don't 
> > know why 
> > > I can't receive any data now. Three days ago I can receive my 
> > data 
> > > before I install the gempack and garp. But when I finished the 
> > > installation, I can't receive any and I can't use "ldmadmin 
> > watch " to 
> > > see the data coming 
> > >  There are following infor when I run rpc.ldmd:
> > > 
> > > spring% bin/rpc.ldmd -vl - -q data/ldm.pq etc/ldmd.conf
> > > 
> > > Apr 29 14:51:09 rpc.ldmd[7333]: Starting Up (built: Aug 25 2000 
> > > 09:28:27)
> > > Apr 29 14:51:09 shortfin[7336]: run_requester: Starting Up: 
> > > shortfin.ldgo.columbia.edu
> > > Apr 29 14:51:09 rpc.ldmd[7333]: bind: 388: Address already in use
> > > Apr 29 14:51:09 rpc.ldmd[7333]: Exiting
> > > Apr 29 14:51:09 rpc.ldmd[7333]: Terminating process group
> > > 
> > >  Is that right? How can I find what is the cause that I can't 
> > receive 
> > > any data?
> > >  Thank you very much!
> > > 
> > > Dongyu liu
> > > ----- Original Message -----
> > > From: Unidata Support <address@hidden>
> > > Date: Wednesday, April 24, 2002 6:38 pm
> > > Subject: 20020424: Gempak installation! 
> > > > >----- Original Message -----
> > > > >From: Unidata Support <address@hidden>
> > > > >Date: Wednesday, April 24, 2002 5:27 pm
> > > > >Subject: 20020424: 20020424: Gempak installation! 
> > > > >
> > > > >> 
> > > > >> dongyu,
> > > > >> 
> > > > >> The binary installation does not contain the $GEMLIB 
> > directory 
> > > > since>> you do not need that to run the programs. The binary 
> > > > installation>> only includes the directories necessary to run 
> > GEMPAK.> > >> 
> > > > >> If you want to link your own programs against the GEMPAK 
> > > > >> libraries, then
> > > > >> you can download them as a separate tar file from the Web 
> > portal.> > >> 
> > > > >> You should set your LD_LIBRARY_PATH environmental variable to
> > > > >> the location of our F77 shareable libraries on your system.
> > > > >> If you do not have the appropriate Fortran shareable libraries
> > > > >> already, then you can download them as well from the Web 
> > portal 
> > > > site>> and place them in a location on your system and add 
> > that to 
> > > > your>> LD_LIBRARY_PATH. All of this is included in the README 
> > file for
> > > > >> the binary installations.
> > > > >> 
> > > > >> 
> > > > >> See the Solaris binary installation instructions under:
> > > > >> http://my.unidata.ucar.edu/modules.php?
> > > > >name=Downloads&d_op=viewsdownload&sid=5
> > > > >> 
> > > > >> The following links are provided:
> > > > >> README file for GEMPAK binary installation (SOLARIS SPARC)
> > > > >> GEMPAK program libraries, V5.6.F, Solaris Sparc 
> > > > >> System shared libraries for Solaris Sparc 
> > > > >> 
> > > > >> Steve Chiswell
> > > > >> Unidata User SUpport
> > > > >> 
> > > > >> >From: <address@hidden>
> > > > >> >Organization: UCAR/Unidata
> > > > >> >Keywords: 200204242119.g3OLJka14932
> > > > >> 
> > > > >> >Hi:
> > > > >> > I have settled  the (1)(2) problem by creating the lib 
> > > > directory 
> > > > >> by 
> > > > >> >myself and download the system library from your ftp site. 
> > 
> > > > >> > Then how about the third question?
> > > > >> >
> > > > >> >dongyu
> > > > >> >
> > > > >> >----- Original Message -----
> > > > >> >From: Steve Chiswell <address@hidden>
> > > > >> >Date: Wednesday, April 24, 2002 4:05 pm
> > > > >> >Subject: 20020424: Gempak installation! 
> > > > >> >
> > > > >> >> 
> > > > >> >> Dongyu,
> > > > >> >> 
> > > > >> >> If you downloaded a binary distribution of GEMPAK, then 
> > > > there are
> > > > >> >> no Makefiles because the distribution is already built. All
> > > > >> >> you have to do is edit the Gemenviron file. For more 
> > > > >> instructions, see
> > > > >> >> the README files for the appropriate binary installation 
> > as 
> > > > found>> >> on the Unidata web portal site.
> > > > >> >> 
> > > > >> >> If you want to build the GEMPAK distribution locally, 
> > > > download the
> > > > >> >> source code tarfile.
> > > > >> >> 
> > > > >> >> Steve Chiswell
> > > > >> >> Unidata User Support
> > > > >> >> 
> > > > >> >> >
> > > > >> >> > ---------- Forwarded message ----------
> > > > >> >> > Date: Wed, 24 Apr 2002 14:09:30 -0400
> > > > >> >> > From: address@hidden
> > > > >> >> > To: Jeff Weber <address@hidden>
> > > > >> >> > Subject: Gempack installation!
> > > > >> >> >
> > > > >> >> > Hi Jeff:
> > > > >> >> >
> > > > >> >> >  Sorry to bother you again!
> > > > >> >> >
> > > > >> >> > I am installing Gempak on our machine. Now I meet some 
> > > > >> >> problems:When I
> > > > >> >> > run "make all >& make.out &", I can't continue my 
> > > > >> installation. 
> > > > >> >> I can't
> > > > >> >> > find the makefiles.Where can I find the Unidata 
> > makefiles? 
> > > > >> Could you
> > > > >> >> > tell me? I have followed the procedure in the 
> > installation 
> > > > file.>> >> >
> > > > >> >> > dongyu Liu
> > > > >> >> > George Mason University
> > > > >> >> >
> > > > >> >> > ----- Original Message -----
> > > > >> >> > From: Jeff Weber <address@hidden>
> > > > >> >> > Date: Monday, April 22, 2002 3:29 pm
> > > > >> >> > Subject: Re: Feed Request
> > > > >> >> >
> > > > >> >> > > Hi Dongyu,
> > > > >> >> > >
> > > > >> >> > > If you are still requesting UNIDATA  ".*"as a feed 
> > type 
> > > > you 
> > > > >> >> should be
> > > > >> >> > > getting the HDS/HRS (model) feed.
> > > > >> >> > >
> > > > >> >> > > Here are some examples from our pqact.conf file..:
> > > > >> >> > >
> > > > >> >> > > Keep in mind you need to use tabs and no "carriage 
> > > > >> returns"..for>> > > pqact.conf
> > > > >> >> > >
> > > > >> >> > > # Select an#
> > > > >> >> > > # RUC/MAPS model output
> > > > >> >> > > # Grid #211 CONUS   80km: ^[YZ].Q.*/mRUC
> > > > >> >> > > # Currently, only grid #211
> > > > >> >> > > #
> > > > >> >> > > # NGM model output
> > > > >> >> > > # Grid #211 CONUS   80km: ^[YZ].Q.*/mNGM
> > > > >> >> > > # Grid #207 Alaska  95km: ^[YZ].N.*/mNGM
> > > > >> >> > > # Grid #202 CONUS  190km: ^[YZ].I.*/mNGM
> > > > >> >> > > # Grid #213 CONUS 47.5km: ^[YZ].H.*/mNGM
> > > > >> >> > > # Select an
> > > > >> >> > > HRS     ^[YZ].(.)... KWB. ([0-3][0-9])([0-2][0-
> > > > >> >> 9]).*/m(ETA|NGM|RUC)> >        FILE
> > > > >> >> > >        
> > data/pub/raw/hrs/model/\1/(\2:yyyy)(\2:mm)\2\3_\4.wmo> > >> >> > >
> > > > >> >> > > # NOAAport MRF grids
> > > > >> >> > > # Grid #201 N. Hemisphere 381km: ^Y.A... KWBH
> > > > >> >> > > # Grid #202 CONUS         190km: ^Y.I... KWBH
> > > > >> >> > > # Grid #203 Alaska        190km: ^Y.J... KWBH
> > > > >> >> > > # Grid #204 Hawaii        160km: ^Y.K... KWBH
> > > > >> >> > > # Grid #205 Puerto Rico   190km: ^Y.L... KWBH
> > > > >> >> > > # Select an
> > > > >> >> > > HRS     ^[YZ].(.)... KWBH ([0-3][0-9])([0-2][0-9])
> > > > >> >> > >        FILE
> > > > >> >> > >        
> > > > data/pub/raw/hrs/model/\1/(\2:yyyy)(\2:mm)\2\3_MRF.wmo>> >> > >
> > > > >> >> > > # AVN model output
> > > > >> >> > > # Grid #201 N. Hemisphere 381km: ^Y.A... 
> > > > KWBC.*(/mAVN|/mSSIAVN)>> >> > > # Grid #202 CONUS         
> > 190km: 
> > > > ^Y.I... KWBC.*(/mAVN|/mSSIAVN)
> > > > >> >> > > # Grid #203 Alaska        190km: ^Y.J... 
> > > > KWBC.*(/mAVN|/mSSIAVN)>> >> > > # Grid #211 CONUS          
> > 80km: 
> > > > ^Y.Q... KWBC.*(/mAVN|/mSSIAVN)
> > > > >> >> > > # Grid #213 CONUS          95km: ^Y.H... 
> > > > KWBC.*(/mAVN|/mSSIAVN)>> >> > > # Select an
> > > > >> >> > > HRS     ^[YZ].([QAIJH])... KWB. ([0-3][0-9])([0-2][0-
> > > > >> >> > > 9]).*(/mAVN|/mSSIAVN)        FILE
> > > > >> >> > >        
> > > > data/pub/raw/hrs/model/\1/(\2:yyyy)(\2:mm)\2\3_AVN.wmo>> >> > >
> > > > >> >> > >
> > > > >> >> > >
> > > > >> >> > > Let me know if I can help further...
> > > > >> >> > >
> > > > >> >> > > Thank you,
> > > > >> >> > >
> > > > >> >> > > -Jeff
> > > > >> >> > > ____________________________                  
> > > > >> >> _____________________> > Jeff Weber                      
> >    
> > > >   
> > > > >>   
> > > > >> >>    address@hidden
> > > > >> >> > > Unidata Support                               PH:303-
> > 497-
> > > > 8676>> >> > > NWS-COMET Case Study Library                  
> > FX:303-
> > > > 497-8690
> > > > >> >> > > University Corp for Atmospheric Research      3300 
> > > > Mitchell Ln
> > > > >> >> > > http://www.unidata.ucar.edu/staff/jweber      
> > Boulder,Co 
> > > > >> 80307-
> > > > >> >> 3000> > ________________________________________      
> > > > >> >> ______________________> >
> > > > >> >> > > On Mon, 22 Apr 2002 address@hidden wrote:
> > > > >> >> > >
> > > > >> >> > > > Hi Jeff:
> > > > >> >> > > >
> > > > >> >> > > >  Thank you very much for your reply! I think I 
> > have 
> > > > send too
> > > > >> >> > > many
> > > > >> >> > > > questions to you.
> > > > >> >> > > >
> > > > >> >> > > >  I have already received some data from LDM. Now I 
> > > > want 
> > > > >> to get
> > > > >> >> > > some Grib
> > > > >> >> > > > (.GRIB) file. I don't care what category of data 
> > it 
> > > > is. I 
> > > > >> only>> > > want to
> > > > >> >> > > > make that it is GRIB file.
> > > > >> >> > > >
> > > > >> >> > > >  Could you tell me how to config in the 
> > pqact.conf? Or 
> > > > >> Could you
> > > > >> >> > > > recommend somebody I can ask for a advice ?
> > > > >> >> > > >  Thank you again.
> > > > >> >> > > >
> > > > >> >> > > > dongyu
> > > > >> >> >
> > > > >> >> 
> > > > >> >> 
> > > > >> >
> > > > >> 
> > > > >> 
> > > > 
> > > 
> > 
> >***********************************************************************
> > *
> > > > >> Unidata User Support                                    
> > UCAR 
> > > > >> (303)497-8644                                               
> >   
> > > > >> address@hidden                                   
> > > > >> ------------------------------------------------------------
> > ----
> > > > ---
> > > > >> Unidata WWW Service                        
> > > > >> 
> > > > 
> > > 
> > 
> >***********************************************************************
> > *
> > > > >> 
> > > > >
> > > > 
> > > > 
> > > 
> > 
> ************************************************************************
> > > > Unidata User Support                                    UCAR 
> > > > (303)497-8644                                                  
> > > > address@hidden                                   
> > > > ---------------------------------------------------------------
> > ----
> > > > Unidata WWW Service                        
> > > > 
> > > 
> > 
> ************************************************************************
> > > > 
> > > 
> > > 
> > > ------- End of Forwarded Message
> > > 
> > > 
> > 
> > 
> 
>