[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 20020429: ldm bind: 388: Address already in use

Dongyu, 

The LDM appears to still be running..

 Apr 29 14:51:09 rpc.ldmd[7333]: bind: 388: Address already in use

So you will want to stop the ldm first.

Do: 

ldmadmin stop

then

ps - ef| grep rpc

or 

ps -ef | grep ldm

to make sure no ldm owned processes are still active

then

ldmadmin start

Please let me know if this does not work, we may need to re-build the
queue as well..

Thank you,

-Jeff
____________________________                  _____________________
Jeff Weber                                    address@hidden
Unidata Support                               PH:303-497-8676 
NWS-COMET Case Study Library                  FX:303-497-8690
University Corp for Atmospheric Research      3300 Mitchell Ln
http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
________________________________________      ______________________

On Mon, 29 Apr 2002, Unidata Support wrote:

> 
> 
> Jeff,
> 
> see problem below about restarting his LDM.
> 
> Steve
> 
> 
> ------- Forwarded Message
> 
> >To: Unidata Support <address@hidden>
> >From: <address@hidden>
> >Subject: Re: 20020424: Gempak installation! 
> >Organization: UCAR/Unidata
> >Keywords: 200204291502.g3TF2Ba14462
> 
> Dear Steve:
> 
>  Now my garp can run smoothly. But I met new problems. I don't know why 
> I can't receive any data now. Three days ago I can receive my data 
> before I install the gempack and garp. But when I finished the 
> installation, I can't receive any and I can't use "ldmadmin watch " to 
> see the data coming 
>  There are following infor when I run rpc.ldmd:
> 
> spring% bin/rpc.ldmd -vl - -q data/ldm.pq etc/ldmd.conf
> 
> Apr 29 14:51:09 rpc.ldmd[7333]: Starting Up (built: Aug 25 2000 
> 09:28:27)
> Apr 29 14:51:09 shortfin[7336]: run_requester: Starting Up: 
> shortfin.ldgo.columbia.edu
> Apr 29 14:51:09 rpc.ldmd[7333]: bind: 388: Address already in use
> Apr 29 14:51:09 rpc.ldmd[7333]: Exiting
> Apr 29 14:51:09 rpc.ldmd[7333]: Terminating process group
> 
>  Is that right? How can I find what is the cause that I can't receive 
> any data?
>  Thank you very much!
> 
> Dongyu liu
> ----- Original Message -----
> From: Unidata Support <address@hidden>
> Date: Wednesday, April 24, 2002 6:38 pm
> Subject: 20020424: Gempak installation! 
> > >----- Original Message -----
> > >From: Unidata Support <address@hidden>
> > >Date: Wednesday, April 24, 2002 5:27 pm
> > >Subject: 20020424: 20020424: Gempak installation! 
> > >
> > >> 
> > >> dongyu,
> > >> 
> > >> The binary installation does not contain the $GEMLIB directory 
> > since>> you do not need that to run the programs. The binary 
> > installation>> only includes the directories necessary to run GEMPAK.
> > >> 
> > >> If you want to link your own programs against the GEMPAK 
> > >> libraries, then
> > >> you can download them as a separate tar file from the Web portal.
> > >> 
> > >> You should set your LD_LIBRARY_PATH environmental variable to
> > >> the location of our F77 shareable libraries on your system.
> > >> If you do not have the appropriate Fortran shareable libraries
> > >> already, then you can download them as well from the Web portal 
> > site>> and place them in a location on your system and add that to 
> > your>> LD_LIBRARY_PATH. All of this is included in the README file for
> > >> the binary installations.
> > >> 
> > >> 
> > >> See the Solaris binary installation instructions under:
> > >> http://my.unidata.ucar.edu/modules.php?
> > >name=Downloads&d_op=viewsdownload&sid=5
> > >> 
> > >> The following links are provided:
> > >> README file for GEMPAK binary installation (SOLARIS SPARC)
> > >> GEMPAK program libraries, V5.6.F, Solaris Sparc 
> > >> System shared libraries for Solaris Sparc 
> > >> 
> > >> Steve Chiswell
> > >> Unidata User SUpport
> > >> 
> > >> >From: <address@hidden>
> > >> >Organization: UCAR/Unidata
> > >> >Keywords: 200204242119.g3OLJka14932
> > >> 
> > >> >Hi:
> > >> > I have settled  the (1)(2) problem by creating the lib 
> > directory 
> > >> by 
> > >> >myself and download the system library from your ftp site.  
> > >> > Then how about the third question?
> > >> >
> > >> >dongyu
> > >> >
> > >> >----- Original Message -----
> > >> >From: Steve Chiswell <address@hidden>
> > >> >Date: Wednesday, April 24, 2002 4:05 pm
> > >> >Subject: 20020424: Gempak installation! 
> > >> >
> > >> >> 
> > >> >> Dongyu,
> > >> >> 
> > >> >> If you downloaded a binary distribution of GEMPAK, then 
> > there are
> > >> >> no Makefiles because the distribution is already built. All
> > >> >> you have to do is edit the Gemenviron file. For more 
> > >> instructions, see
> > >> >> the README files for the appropriate binary installation as 
> > found>> >> on the Unidata web portal site.
> > >> >> 
> > >> >> If you want to build the GEMPAK distribution locally, 
> > download the
> > >> >> source code tarfile.
> > >> >> 
> > >> >> Steve Chiswell
> > >> >> Unidata User Support
> > >> >> 
> > >> >> >
> > >> >> > ---------- Forwarded message ----------
> > >> >> > Date: Wed, 24 Apr 2002 14:09:30 -0400
> > >> >> > From: address@hidden
> > >> >> > To: Jeff Weber <address@hidden>
> > >> >> > Subject: Gempack installation!
> > >> >> >
> > >> >> > Hi Jeff:
> > >> >> >
> > >> >> >  Sorry to bother you again!
> > >> >> >
> > >> >> > I am installing Gempak on our machine. Now I meet some 
> > >> >> problems:When I
> > >> >> > run "make all >& make.out &", I can't continue my 
> > >> installation. 
> > >> >> I can't
> > >> >> > find the makefiles.Where can I find the Unidata makefiles? 
> > >> Could you
> > >> >> > tell me? I have followed the procedure in the installation 
> > file.>> >> >
> > >> >> > dongyu Liu
> > >> >> > George Mason University
> > >> >> >
> > >> >> > ----- Original Message -----
> > >> >> > From: Jeff Weber <address@hidden>
> > >> >> > Date: Monday, April 22, 2002 3:29 pm
> > >> >> > Subject: Re: Feed Request
> > >> >> >
> > >> >> > > Hi Dongyu,
> > >> >> > >
> > >> >> > > If you are still requesting UNIDATA  ".*"as a feed type 
> > you 
> > >> >> should be
> > >> >> > > getting the HDS/HRS (model) feed.
> > >> >> > >
> > >> >> > > Here are some examples from our pqact.conf file..:
> > >> >> > >
> > >> >> > > Keep in mind you need to use tabs and no "carriage 
> > >> returns"..for>> > > pqact.conf
> > >> >> > >
> > >> >> > > # Select an#
> > >> >> > > # RUC/MAPS model output
> > >> >> > > # Grid #211 CONUS   80km: ^[YZ].Q.*/mRUC
> > >> >> > > # Currently, only grid #211
> > >> >> > > #
> > >> >> > > # NGM model output
> > >> >> > > # Grid #211 CONUS   80km: ^[YZ].Q.*/mNGM
> > >> >> > > # Grid #207 Alaska  95km: ^[YZ].N.*/mNGM
> > >> >> > > # Grid #202 CONUS  190km: ^[YZ].I.*/mNGM
> > >> >> > > # Grid #213 CONUS 47.5km: ^[YZ].H.*/mNGM
> > >> >> > > # Select an
> > >> >> > > HRS     ^[YZ].(.)... KWB. ([0-3][0-9])([0-2][0-
> > >> >> 9]).*/m(ETA|NGM|RUC)> >        FILE
> > >> >> > >        data/pub/raw/hrs/model/\1/(\2:yyyy)(\2:mm)\2\3_\4.wmo
> > >> >> > >
> > >> >> > > # NOAAport MRF grids
> > >> >> > > # Grid #201 N. Hemisphere 381km: ^Y.A... KWBH
> > >> >> > > # Grid #202 CONUS         190km: ^Y.I... KWBH
> > >> >> > > # Grid #203 Alaska        190km: ^Y.J... KWBH
> > >> >> > > # Grid #204 Hawaii        160km: ^Y.K... KWBH
> > >> >> > > # Grid #205 Puerto Rico   190km: ^Y.L... KWBH
> > >> >> > > # Select an
> > >> >> > > HRS     ^[YZ].(.)... KWBH ([0-3][0-9])([0-2][0-9])
> > >> >> > >        FILE
> > >> >> > >        
> > data/pub/raw/hrs/model/\1/(\2:yyyy)(\2:mm)\2\3_MRF.wmo>> >> > >
> > >> >> > > # AVN model output
> > >> >> > > # Grid #201 N. Hemisphere 381km: ^Y.A... 
> > KWBC.*(/mAVN|/mSSIAVN)>> >> > > # Grid #202 CONUS         190km: 
> > ^Y.I... KWBC.*(/mAVN|/mSSIAVN)
> > >> >> > > # Grid #203 Alaska        190km: ^Y.J... 
> > KWBC.*(/mAVN|/mSSIAVN)>> >> > > # Grid #211 CONUS          80km: 
> > ^Y.Q... KWBC.*(/mAVN|/mSSIAVN)
> > >> >> > > # Grid #213 CONUS          95km: ^Y.H... 
> > KWBC.*(/mAVN|/mSSIAVN)>> >> > > # Select an
> > >> >> > > HRS     ^[YZ].([QAIJH])... KWB. ([0-3][0-9])([0-2][0-
> > >> >> > > 9]).*(/mAVN|/mSSIAVN)        FILE
> > >> >> > >        
> > data/pub/raw/hrs/model/\1/(\2:yyyy)(\2:mm)\2\3_AVN.wmo>> >> > >
> > >> >> > >
> > >> >> > >
> > >> >> > > Let me know if I can help further...
> > >> >> > >
> > >> >> > > Thank you,
> > >> >> > >
> > >> >> > > -Jeff
> > >> >> > > ____________________________                  
> > >> >> _____________________> > Jeff Weber                          
> >   
> > >>   
> > >> >>    address@hidden
> > >> >> > > Unidata Support                               PH:303-497-
> > 8676>> >> > > NWS-COMET Case Study Library                  FX:303-
> > 497-8690
> > >> >> > > University Corp for Atmospheric Research      3300 
> > Mitchell Ln
> > >> >> > > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 
> > >> 80307-
> > >> >> 3000> > ________________________________________      
> > >> >> ______________________> >
> > >> >> > > On Mon, 22 Apr 2002 address@hidden wrote:
> > >> >> > >
> > >> >> > > > Hi Jeff:
> > >> >> > > >
> > >> >> > > >  Thank you very much for your reply! I think I have 
> > send too
> > >> >> > > many
> > >> >> > > > questions to you.
> > >> >> > > >
> > >> >> > > >  I have already received some data from LDM. Now I 
> > want 
> > >> to get
> > >> >> > > some Grib
> > >> >> > > > (.GRIB) file. I don't care what category of data it 
> > is. I 
> > >> only>> > > want to
> > >> >> > > > make that it is GRIB file.
> > >> >> > > >
> > >> >> > > >  Could you tell me how to config in the pqact.conf? Or 
> > >> Could you
> > >> >> > > > recommend somebody I can ask for a advice ?
> > >> >> > > >  Thank you again.
> > >> >> > > >
> > >> >> > > > dongyu
> > >> >> >
> > >> >> 
> > >> >> 
> > >> >
> > >> 
> > >> 
> > 
> >***********************************************************************
> *
> > >> Unidata User Support                                    UCAR 
> > >> (303)497-8644                                                  
> > >> address@hidden                                   
> > >> ----------------------------------------------------------------
> > ---
> > >> Unidata WWW Service                        
> > >> 
> > 
> >***********************************************************************
> *
> > >> 
> > >
> > 
> > 
> ************************************************************************
> > Unidata User Support                                    UCAR 
> > (303)497-8644                                                  
> > address@hidden                                   
> > -------------------------------------------------------------------
> > Unidata WWW Service                        
> > 
> ************************************************************************
> > 
> 
> 
> ------- End of Forwarded Message
> 
>