[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 20020426: LDM configuration at GMU



Dongyu, 

Sure, I'll be more than happy to poke around to see what I can find..

You may wish to send the login and password in seperate e-mails for
security purposes...

Thank you,

-Jeff
____________________________                  _____________________
Jeff Weber                                    address@hidden
Unidata Support                               PH:303-497-8676 
NWS-COMET Case Study Library                  FX:303-497-8690
University Corp for Atmospheric Research      3300 Mitchell Ln
http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000
________________________________________      ______________________

On Fri, 26 Apr 2002, Unidata Support wrote:

> 
> 
> Jeff,
> 
> Can you help Dongyu check his LDM:
> 
> >Two days ago I can use many
> >data using the command " ldmadmin watch" , But now I can't see any data
> >now using that command. The command stop there without any response.
> >Could you see for me?  I can give you my account number and password.
> 
> 
> I ran notifyme to his computer and see nothing recent in the queue:
> 
> notifyme -v -l - -o 15999 -h spring.scs.gmu.edu
> Apr 26 18:44:57 notifyme[644158]: Starting Up: spring.scs.gmu.edu: 
>                          20020426141818.418 TS_ENDT {{ANY,  ".*"}}
> Apr 26 18:45:07 notifyme[644158]: NOTIFYME(spring.scs.gmu.edu): OK
> Apr 26 18:47:19 notifyme[644158]: Interrupt
> Apr 26 18:47:19 notifyme[644158]: exiting
> 
> 
> Chiz
> 
> 
> 
> 
> ------- Forwarded Message
> 
> >To: Unidata Support <address@hidden>
> >From: <address@hidden>
> >Subject: Re: 20020425: Gempak decoders with LDM 
> >Organization: UCAR/Unidata
> >Keywords: 200204261837.g3QIbGa04917
> 
> Hi:
>  I have done as you described. I don't know why I still can't receive 
> any *.gem data(upperair and surface data). Two days ago I can use many 
> data using the command " ldmadmin watch" , But now I can't see any data 
> now using that command. The command stop there without any response.
>  Could you see for me?  I can give you my account number and password.
> 
> dongyu
> ----- Original Message -----
> From: Unidata Support <address@hidden>
> Date: Thursday, April 25, 2002 6:16 pm
> Subject: 20020425: Gempak decoders with LDM 
> 
> > 
> > Dongyu,
> > 
> > The paths in pqact.conf are relative to the ~ldm account directory.
> > 
> > The sample GEMPAK decoder entries I provide at:
> > 
> http://www.unidata.ucar.edu/packages/gempak/tutorial/pqact/decoders.tbl
> > show the use of decoders/dc..... for the executable path.
> > 
> > You can either create a link from your $GEMEXE directory to 
> > ~ldm/decoders (so that a ~ldm/decoders/dcuair finds your 
> > $GEMEXE/dcuair file),
> > 
> > or 
> > 
> > create a decoders directory under ~ldm and copy the $GEMEXE/dc* 
> > programsinto ~ldm/decoders.
> > 
> > In your pqact.conf lines below, you have /decoders/dcuair and
> > /usr/local/ldm/decoders/dcmetr. These are likely wrong.
> > 
> > If you create the ~ldm/deciders directory as I mentioned above,
> > then the proper executable paths will be decoders/dcuair and
> > decoders/dcmetr. Or, you can give the full path to your
> > programs (but it makes for more editing of the samples I provide):
> > /export/home/gempack/bin/sol/dcuair 
> > /export/home/gempack/bin/sol/dcmetr.
> > 
> > Also, you do not need to but TAB characters between the 
> > decoder options and there values, eg, <TAB> characters separate the
> > arguments interpreted by pqact:
> > 
> > #upperair data
> > DDS|IDS <TAB> ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-
> > 2][0-9])
> >        <TAB> PIPE <TAB> /decoders/dcuair -b 24 -m 16
> >        <TAB> -d /usr/local/ldm/data/gempak/logs/dcuair.log
> >        <TAB> -e GEMTBL=/export/home/gempack/gempak/tables/stns
> >        <TAB> -s snstns.tbl
> >        <TAB> data/gempak/upperair/YYYYMMDD_upa.gem
> > 
> > For GRIB data, use the dcgrib2 example I provide in the 
> > web URL above:
> > # Global GRIB decoding action. 
> > # Products stored maintained in $GEMTBL/grid/gribkey.tbl
> > HDS ^[HOYZ].*
> >    PIPE     decoders/dcgrib2 -d data/gempak/logs/dcgrib.log
> >    -e GEMTBL=/export/home/gempack/gempak/tables
> > 
> > 
> > You can use GARP, or NMAP2 as GUI interfaces to display the
> > data. Or, the command line programs like sfmap, snmap, etc.
> > The configuration files in $GEMTBL/config/datatype.tbl and
> > $GARPHOME/config/Garp_defaults.tbl all assume you use the
> > decoded file locations under ~ldm/data/gempak as shown on the
> > URL above. If you  use these locations, then you only
> > need to edit the environmental variable locations in 
> > $NAWIPS/Gemenvironfor $GEMDATA on your system.
> > 
> > For example, if your ~ldm account is /usr/local/ldm, and your data 
> > is being
> > filed under the ~ldm/data/gempak directory, then
> > set GEMDATA in the Gemenviron file to /usr/local/ldm/data/gempak.
> > 
> > 
> > The decoders that come from NCEP (like dcmetr and dcuair)
> > require that you create the data directory that they will write
> > to, so make sure ~ldm/data/gempak/upperair and
> > ~ldm/data/gempak/surface exist.
> > 
> > The dcgrib2 decoder will create all the necessary directories.
> > 
> > 
> > Steve Chiswell
> > Unidata User Support
> > 
> > 
> > 
> > 
> > >From: <address@hidden>
> > >Organization: UCAR/Unidata
> > >Keywords: 200204252028.g3PKSEa13166
> > 
> > >Dear Steve:
> > > Thank you for your advice!
> > > I have settled the problem according to your advice. I am a new 
> > comer 
> > >to LDM and UniDATA.  I have the following questions:
> > >
> > >(1) How can I display the WMO and GRIB file using the GARP? 
> > >
> > >(2)Is GARP the most common used software in GEMPAK to display data?
> > >
> > >(3)Now I want to receive the upper air data and surface data. So 
> > I 
> > >wrote following in my pqact.conf file.  But I can't receive any 
> > data of 
> > >gem file. Can you tell me why? In addition ,Could I know which 
> > data I 
> > >am writing on my disk instead of "ldmadmin watch"? As you know, 
> > >ldmadmin watch only watch all the data I can receive , not the 
> > data I 
> > >wrote to my disk. I check my pqact.conf file to be syntax-
> > correct.Thank 
> > >you very much.
> > >
> > > #upperair data
> > >DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9])
> > >        PIPE    /decoders/dcuair        -b      24      -m      16
> > >        -d      /usr/local/ldm/data/gempak/logs/dcuair.log
> > >        -e      GEMTBL=/export/home/gempack/gempak/tables/stns
> > >        -s      snstns.tbl
> > >        /usr/local/ldm/data/gempak/upperair/YYYYMMDD_upa.gem
> > >
> > >#surface data
> > >DDS|IDS ^S[AP].* .... ([0-3][0-9])([0-2][0-9])
> > >        PIPE    /usr/local/ldm/decoders/dcmetr  -b      9       -
> > m      
> > >72
> > >        -d      /data/gempak/logs/dcmetr.log
> > >        -e      GEMTBL=/export/home/gempack/gempak/tables/stns
> > >        -s      sfmetar_sa.tbl
> > >        /usr/local/ldm/data/gempak/surface/YYYYMMDD_sao.gem
> > >
> > >
> > >Dongyu Liu
> > >----- Original Message -----
> > >From: Unidata Support <address@hidden>
> > >Date: Thursday, April 25, 2002 10:47 am
> > >Subject: 20020424: 20020424: Gempak installation! 
> > >
> > >
> > >
> > 
> > 
> ************************************************************************
> > Unidata User Support                                    UCAR 
> > (303)497-8644                                                  
> > address@hidden                                   
> > -------------------------------------------------------------------
> > Unidata WWW Service                        
> > 
> ************************************************************************
> > 
> 
> 
> ------- End of Forwarded Message
> 
>