[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[IDV #OFE-561124]: Filtering



Robbie,

I put together this video for you here:

https://www.youtube.com/watch?v=22TWdFunK3E&index=16&list=PLQut5OXpV-0gqVk8LFD6Riv6X3QcAVw_U

and also here:

http://motherlode.ucar.edu/repository/entry/show/RAMADDA/IDV+Community+Resources/Unidata+IDV+Screencasts/Unidata+IDV+Screencast+16+-+Exploring+Earthquake+CSV+Data+in+the+IDV?entryid=89fc0663-0d7c-464a-b10b-6245e6c9340d

Please take the time to really study the video and also your data.

After you have done your homework, please let us know if you have more 
questions about filtering, time or anything else.

Best,

Unidata IDV Support


> Okay I switched the units to Km. I have tried both putting the brackets
> around the units and without them. I have also tried just entering in the
> value in m. I keep getting the same error message.
> 
> Please see the attached screen shot
> 
> address@hidden> wrote:
> 
> > Robbie,
> >
> > You can also specify units in the filter
> >
> >
> > https://www.unidata.ucar.edu/software/idv/docs/userguide/controls/StationModelControl.html
> >
> > http://www.unidata.ucar.edu/software/idv/docs/workshop/datadisplays/point/MetarSynopDisplays.html
> >
> > So here it would be -100[km], I believe.
> >
> > Or do a "Point Data List" for the Display to see the units you are dealing
> > with.
> >
> > Also note:
> >
> > "If you do not provide a unit then the comparison is done using the native
> > unit of the observation value. "
> >
> > Best,
> >
> > Unidata IDV Support
> >
> >
> > > And that's the brain fart of the day
> > >
> > > Thanks
> > > R
> > address@hidden>
> > > wrote:
> > >
> > > > Robbie,
> > > >
> > > > Converting from kilometers to meters is a fairly simple arithmetic
> > > > operation.
> > > >
> > > > For example, 1 kilometer = 1,000 meters or 100 kilometers is 100,000
> > > > meters.
> > > >
> > > > Does that make sense?
> > > >
> > > > Best,
> > > >
> > > > Unidata IDV Support
> > > >
> > > > > No it is within 100km of the surface. How do I adjust the scale on
> > the
> > > > > filter?
> > > > >
> > > > > address@hidden> wrote:
> > > > >
> > > > > > Robbie,
> > > > > >
> > > > > > Are you sure the data are within a 100 meters of the surface of the
> > > > Earth?
> > > > > >
> > > > > > Best,
> > > > > >
> > > > > > Unidata IDV Support
> > > > > >
> > > > > > > Yes i am plotting seismic data of magnitude 2 sso it show up in
> > > > shallow
> > > > > > > depths. I have also tried 300 400 and 600 and still received the
> > same
> > > > > > error
> > > > > > > message
> > > > > > address@hidden>
> > > > > > > wrote:
> > > > > > >
> > > > > > > > Robbie,
> > > > > > > >
> > > > > > > > Are you expecting data "above" 100 meters below the ground
> > because
> > > > > > that's
> > > > > > > > what you are asking for. Is your seismic data really between
> > the
> > > > > > surface
> > > > > > > > of the
> > > > > > > > Earth and 100 meters deep?
> > > > > > > >
> > > > > > > > Best,
> > > > > > > >
> > > > > > > > Unidata IDV Support
> > > > > > > >
> > > > > > > > > That makes sense because they are depths. I changed my filter
> > > > value
> > > > > > to
> > > > > > > > > negative thinking this would fix the problem however I
> > received
> > > > the
> > > > > > same
> > > > > > > > > error message. What should I do? Is there any where I could
> > > > upload my
> > > > > > > > data
> > > > > > > > > where you would have accesses to it?
> > > > > > > > >
> > > > > > > > > Robbie
> > > > > > > > >
> > > > > > > > > address@hidden> wrote:
> > > > > > > > >
> > > > > > > > > > Robbie,
> > > > > > > > > >
> > > > > > > > > > The data are not in the atmosphere.
> > > > > > > > > >
> > > > > > > > > > Best,
> > > > > > > > > >
> > > > > > > > > > Unidata IDV Support
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > > I do not considering the data I entered in the system
> > should
> > > > > > match.
> > > > > > > > It
> > > > > > > > > > > contains depth and magnitude. Magnitude being something I
> > > > > > identified
> > > > > > > > > > while
> > > > > > > > > > > uploading the data. There should be values for these in
> > the
> > > > text
> > > > > > > > point
> > > > > > > > > > data
> > > > > > > > > > > file I uploaded from USGS.
> > > > > > > > > > >
> > > > > > > > > > > Robbie
> > > > > > > > > > >
> > > > > > > > > > > address@hidden> wrote:
> > > > > > > > > > >
> > > > > > > > > > > > Robbie,
> > > > > > > > > > > >
> > > > > > > > > > > > Although the error message could be better, I think the
> > > > IDV is
> > > > > > > > telling
> > > > > > > > > > you
> > > > > > > > > > > > there are no data matching your criteria. Do you see
> > the
> > > > > > problem?
> > > > > > > > > > > >
> > > > > > > > > > > > Best,
> > > > > > > > > > > >
> > > > > > > > > > > > Unidata IDV Support
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > > Let me know if this helps
> > > > > > > > > > > > >
> > > > > > > > > > > > > address@hidden> wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > > > Robbie,
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Please provide the exact filtering parameters.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Perhaps provide a screen shot of the Filtering
> > dialog.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Best,
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Unidata IDV Support
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Hello IDV-
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > I am attempting to filter my seismic data based
> > on
> > > > > > magnitude
> > > > > > > > > > however
> > > > > > > > > > > > i
> > > > > > > > > > > > > > keep
> > > > > > > > > > > > > > > getting a error message. I am unsure what this
> > error
> > > > > > message
> > > > > > > > > > means.
> > > > > > > > > > > > How
> > > > > > > > > > > > > > can
> > > > > > > > > > > > > > > I filter my text point data by depth, magnitude
> > and
> > > > > > > > location? I
> > > > > > > > > > have
> > > > > > > > > > > > > > > included a picture of the error message
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Robbie
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Ticket Details
> > > > > > > > > > > > > > ===================
> > > > > > > > > > > > > > Ticket ID: OFE-561124
> > > > > > > > > > > > > > Department: Support IDV
> > > > > > > > > > > > > > Priority: Normal
> > > > > > > > > > > > > > Status: Closed
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Ticket Details
> > > > > > > > > > > > ===================
> > > > > > > > > > > > Ticket ID: OFE-561124
> > > > > > > > > > > > Department: Support IDV
> > > > > > > > > > > > Priority: Normal
> > > > > > > > > > > > Status: Closed
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Ticket Details
> > > > > > > > > > ===================
> > > > > > > > > > Ticket ID: OFE-561124
> > > > > > > > > > Department: Support IDV
> > > > > > > > > > Priority: Normal
> > > > > > > > > > Status: Closed
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > Ticket Details
> > > > > > > > ===================
> > > > > > > > Ticket ID: OFE-561124
> > > > > > > > Department: Support IDV
> > > > > > > > Priority: Normal
> > > > > > > > Status: Closed
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > > Ticket Details
> > > > > > ===================
> > > > > > Ticket ID: OFE-561124
> > > > > > Department: Support IDV
> > > > > > Priority: Normal
> > > > > > Status: Closed
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > Ticket Details
> > > > ===================
> > > > Ticket ID: OFE-561124
> > > > Department: Support IDV
> > > > Priority: Normal
> > > > Status: Closed
> > > >
> > > >
> > >
> > >
> >
> >
> > Ticket Details
> > ===================
> > Ticket ID: OFE-561124
> > Department: Support IDV
> > Priority: Normal
> > Status: Closed
> >
> >
> 
> 


Ticket Details
===================
Ticket ID: OFE-561124
Department: Support IDV
Priority: Normal
Status: Closed


NOTE: All email exchanges with Unidata User Support are recorded in the Unidata inquiry tracking system and then made publicly available through the web. If you do not want to have your interactions made available in this way, you must let us know in each email you send to us.