[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
Re: Getting the MRF grids on "HRS" feed (fwd)
- Subject: Re: Getting the MRF grids on "HRS" feed (fwd)
- Date: Mon, 25 Oct 1999 09:43:29 -0600 (MDT)
===============================================================================
Robb Kambic Unidata Program Center
Software Engineer III Univ. Corp for Atmospheric Research
address@hidden WWW: http://www.unidata.ucar.edu/
===============================================================================
---------- Forwarded message ----------
Date: Sun, 24 Oct 1999 02:28:59 +0000
From: Robert Mullenax <address@hidden>
To: Gilbert Sebenste <address@hidden>,
address@hidden
Subject: Re: Getting the MRF grids on "HRS" feed
Gilbert,
We are successfully getting all of the different AVN/MRF grids on both
of our machines. Here is my pqact.conf from psnldm. Hope something
in there helps. (It is an attachment)
####
# $Id: pqact.conf,v 1.7 1996/10/22 20:39:56 mitch Exp $
#
# This is an example pqact.conf file, with example entries commented out.
# Before uncommenting these, you should determine whether you need them, and
# make relevant substitutions, for example your local host name for
# @local-host-name@. Uses of the "@" character are to delimit such
# meta-variables, and should not appear in the substitutions.
#
# Format is
# feedtype tab pattern tab action [tab action_args]
# where tab is \t or \n\t.
#
# Actions are
#
# NOOP
# Do nothing
#
# FILE [-overwrite|-flush|-close|-strip] filename
# write(2) to unix file (flush calls fsync(2))
#
# STDIOFILE [-overwrite|-flush|-close|-strip] filename
# fwrite(3) (buffered io) to file (flush calls fflush(3))
#
# DBFILE dbfilename [dbkey]
# Put to gdbmfile.
#
# PIPE [-close|-strip] commandname [args]
# Put data on stdin of a subprocess specified by
# commandname [args].
# Uses the execvp library call, so if commandname is not fully
# qualified, the PATH environment variable will be used.
#
# EXEC [-wait] commandname [args ...]
# Run a program. No io channel between this process and it.
# Like PIPE above, uses execvp.
#
# Note that the old ALLOW and ACCEPT access control actions are not handled
# by pqact, but by rpc.ldmd instead. ALLOW and ACCEPT lines should be moved
# into the ldmaccess.conf configuration file.
#
# The old BEGIN EXEC actions used to start up other programs (for example
# surf_split and feedhere) when the LDM server is started should no longer
# appear here. Instead these programs should be started by runpg as
# specified in the ldmadmin.conf configuration file instead.
#
# The '-strip' option to FILE, STDIOFILE, & PIPE removes control characters
# (other than the '\n') from the data before output. This is useful for
# cleaning up WMO format text bulletins (like the ldm3 STRIP psuedo action).
#
# To check the syntax of the pqact.conf file, execute pqact with the product
# queue specified as /dev/null:
#
# pqact -vxl- -q /dev/null pqact.conf
#
#### PPS
# Special actions for local text products and other text products of local
# interest.
#
# File the zone forecast in a place for "finger address@hidden",
# assumes a mythical use named "weather" with login directory data/weather.
# Substitute your zonal center for "@zone@", e.g. "KDEN" for Denver.
#PPS ^FPUS54 @KFWD@
# FILE -overwrite -close /export/home/weather/.plan
#
# Append local watches and warnings to local weather file
#PPS ^W..... @KFWD@
# FILE -close /export/home/weather/.plan
#
# Put latest zone forecast in place for mailings via cron
#PPS ^FPUS54 @KFWD@ [0-3][0-9]
# FILE -overwrite -close /export/home/weather/zone
# Mail local severe weather bulletins to local mail alias "severe_@zone@"
#PPS ^W[FMRUW]US.. @KFWD@
# PIPE -close /usr/ucb/mail -s "Severe Weather (@zone@)" severe_@zone@
# Mail earthquake reports to local "earthquakes" mailing list.
#PPS ^SE PIPE -close
# /usr/ucb/mail -s "Earthquake report" earthquakes
#
# File US summary weather
#PPS ^ABUS01 KWBC
# FILE -overwrite -close /export/home/weather/summary
#
# File notices from NWS and NMC in monthly file logs/MMM-notices.wmo.
PPS ^N[FO].... .... ([0-3][0-9])
FILE logs/(\1:mmm)-notices.wmo
#### DDS IDS PPS
# Create raw files for WXP. These entries file raw data where WXP decoders
# and scripts expect to find it.
#
##
# File FD and DF
#
WMO ^DFUS01
FILE data/rawfiles/dfus/DFUS/DFUS%m%d%H
#
WMO ^DFAK01
FILE data/rawfiles/dfus/DFAK/DFUSAK%m%d%H
WMO ^FD(US0[8-9]|US1[0-6])
FILE data/rawfiles/fdus/FDUS%m%d%H
WMO ^FD(AK0[1-3])
FILE data/rawfiles/fdak/FDAK%m%d%H
WMO ^FDCN
FILE data/rawfiles/fdcn/FDCN%m%d%H
WMO ^TC(US4[0-3]|US5[0-3])
FILE data/rawfiles/tcus/TCUS%m%d%H
# Canadian obs for W* stations
DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9])
STDIOFILE data/upperair/(\1:yyyy)(\1:mm)\1\2_upa.wmo
# US and Canadian sfc obs and specials in hourly files yymmddhh_sao.wmo
##
# Watch boxes in yymmddhh_wws.wmo
#PPS ^WWUS40 .... ([0-3][0-9])([0-2][0-9])
# FILE data/severe/(\1:yy)(\1:mm)\1\2_wws.wmo
##
# Fronts in yymmddhh_frt.wmo
#DDS ^ASUS01 .... ([0-3][0-9])([0-2][0-9])
# FILE data/surface/front/(\1:yy)(\1:mm)\1\2_frt.wmo
# fronts in ASUS1ddd
DDS ^ASUS01 .... ([0-3][0-9])([0-2][0-9])
FILE data/surface/front/ASUS1%j
# forecast fronts in FSUS2ddd
DDS ^FSUS02 .... ([0-3][0-9])([0-2][0-9])
FILE data/surface/front/FSUS2%j
# GEMPAK actions for HRS
#
#-----------------------------------------------------------------
#
# Pattern/Action file for NMC gridded data products
#
#-----------------------------------------------------------------
#
# NMC GRIB products
#
#
# ETA 80 km model output for continental US on Lambert conformal grid (#211
grid)
#
#HRS ^Y.Q... KWB. ([0-3][0-9])([0-2][0-9]).*/mETA
# PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
# -g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
# PACK data/gempak/hds/YYYYMMDDHH_eta_grid@@@.gem
#
# Alaska grids (grid #207)
#HRS ^Y.T... KWB. ([0-3][0-9])([0-2][0-9]).*/mETA
# PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
# -g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
# PACK data/gempak/hds/YYYYMMDDHH_alaska.gem
#
# Alaska MRF (grid #203)
HRS ^Y.J... KWBH ([0-3][0-9])([0-2][0-9])
PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
-g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
PACK data/gempak/hds/YYYYMMDDHH_akmrf.gem
#
# Northern Hemisphere MRF (grid #201)
HRS ^Y.A... KWBH
PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
-g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
PACK data/gempak/hds/YYYYMMDDHH_nhmrf.gem
#
# CONUS MRF (grid #202)
HRS ^Y.I... KWBH
PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
-g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
PACK data/gempak/hds/YYYYMMDDHH_usmrf.gem
#
# Hawaii MRF (grid #204)
#HRS ^Y.K... KWBH
# PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
# -g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
# PACK data/gempak/hds/YYYYMMDDHH_himrf.gem
#
# Puerto Rico MRF (grid #205)
#HRS ^Y.L... KWBH
# PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
# -g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
# PACK data/gempak/hds/YYYYMMDDHH_prmrf.gem
#
# MAPS model output decoded into yymmddhh_ruc.gem (#211 grid)
#
HRS ^[YZ]..... KWB. ([0-3][0-9])([0-2][0-9]).*/mRUC
PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
-g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
PACK data/gempak/hds/YYYYMMDDHH_ruc_grid@@@.gem
#
# NGM model output decoded into yymmddhh_ngm.gem (#211 grid)
#
HRS ^[YZ]..... KWB. ([0-3][0-9])([0-2][0-9]).*/mNGM
PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
-g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
PACK data/gempak/hds/YYYYMMDDHH_ngm_grid@@@.gem
#
# AVN model output decoded into yymmddhh_avn.gem (#211 grid)
#
HRS ^[YZ]..... KWB. ([0-3][0-9])([0-2][0-9]).*(/mAVN|/mSSIAVN)
PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
-g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
PACK data/gempak/hds/YYYYMMDDHH_avn_grd@@@.gem
#
# Global AVN (Spectral) Thinned grids
#
HRS ^H.[I-P]... KWB. ([0-3][0-9])([0-2][0-9]).*
PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
-g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
-q"lin,dlat=2.5,dlon=2.5"
PACK data/gempak/hds/YYYYMMDDHH_thin.gem
#
# MRF grids - Extended range grids E and F
#
HRS ^H.[EF][A-Z][0-9][0-9] KWB. ([0-3][0-9])([0-2][0-9])..
PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
-g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
PACK data/gempak/hds/YYYYMMDDHH_mrf.gem
# ETA
#
HRS ^[YZ]..... KWB. ([0-3][0-9])([0-2][0-9]).*/mETA
PIPE /usr/local/ldm/decoders/dcgrib -m 2500 -v -d
data/gempak/logs/dcgrib.log
-g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
PACK data/gempak/hds/YYYYMMDDHH_eta_grid@@@.gem
#
#
#Mesoeta
#HRS ^Y.R... KWBE ([0-3][0-9])([0-2][0-9]).*/mETA
# PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
# -g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
# PACK data/gempak/hds/YYYYMMDDHH_mesoeta.gem
#Mesoeta2(215)
#HRS ^[YZ].U... KWB. ([0-3][0-9][0-2][0-9]).*/mETA
# PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
# -g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
# PACK data/gempak/hds/YYYYMMDDHH_mesoeta2.gem
# Spectral grids - grids A,B,C,D Global grid Forecasts (wind & waves,
temperature)
##
#HRS ^H[A-Z][ABCD][A-Z][0-9][0-9] KWB. ([0-3][0-9])([0-2][0-9])..
# PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
# -g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
# PACK data/gempak/hds/YYYYMMDDHH_spec.gem
#
# Bitmap ocean
#
#HRS ^H[HKLTUV][T-W][ACEIK]93 KWB. ([0-3][0-9])([0-2][0-9])
# PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
# -g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
# PACK data/gempak/hds/YYYYMMDDHH_ocn2.gem
#
# ECMWF GRIB products, decode into yymmdd_ecmf#.gem (e1=global,e2=+/-35lat)
#
HRS ^[^G].* ECMF ([0-3][0-9])([0-2][0-9])
FILE data/rawfiles/(\1:yy)(\1:mm)\1\2_ecmwf.wmo
HRS ^H[HPT][A-L][A-Z][0-9][0-9] ECMF ([0-3][0-9])([0-2][0-9])
PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
-g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
PACK data/gempak/hds/YYYYMMDDHH_ecmf1.gem
HRS ^H[UV][A-L][A-Z][0-9][0-9] ECMF ([0-3][0-9])([0-2][0-9])
PIPE /usr/local/ldm/decoders/dcgrib -v -d data/gempak/logs/dcgrib.log
-g /export/home/gempak/NAWIPS-5.4/gempak5.4/tables
PACK data/gempak/hds/YYYYMMDDHH_ecmf2.gem
#
#
# GEMPAK decoder for BUFR profiler data
#
#HRS ^IUPT.* .... ([0-3][0-9])([0-2][0-9])
# PIPE /usr/local/ldm/decoders/dcprof
# -d data/gempak/logs/dcprof.log
# -p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/profiler.pack
# -s /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/stns/profiler_fsl.stn
# /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/grid/tableb
# /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/grid/tabled
# data/gempak/profiler_bufr/YYYYMMDD_pro.gem
#
# Decode NLDN data as GEMPAK ship file (named YYYYMMDDHH.gem)
#
# PIPE /usr/local/ldm/decoders/dcnldn -m 25000 -s minute10
#NLDN ^(9[3-9])([0-3][0-9][0-9])([0-2][0-9])([0-5][0-9])([0-5][0-9])
# PIPE /usr/local/ldm/decoders/dcnldn -m 5000 -s minute05
# -d data/gempak/logs/dcnldn.log
# -p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/nldn.pack
# data/gempak/nldn/YYYYMMDDHH_nldn.gem
#
#######
# GEMPAK products
#
# US and Canadian sfc obs and specials
#
DDS|IDS ^S[AP].* .... ([0-3][0-9])([0-2][0-9])
PIPE /usr/local/ldm/decoders/dchrly -v 1 -b 9 -m 24
-d data/gempak/logs/dchrly.log
-p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/hrly.pack
-s /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/stns/sfmetar_sa.tbl
data/gempak/surface/YYYYMMDD_sao.gem
# upper air reports
#
DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ].... .... ([0-3][0-9])([0-2][0-9])
PIPE /usr/local/ldm/decoders/dcuair -v 1 -b 24 -n -m 16
-d data/gempak/logs/dcuair.log
-p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/snmerg.pack
-s /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/stns/snworld.tbl
data/gempak/upperair/YYYYMMDD_upa.gem
#
DDS|IDS ^U[ABDEFGHIJKLMPQRSTXZ]^[CN][0-9][0-9] .... ([0-3][0-9])([0-2][0-9])
STDIOFILE data/rawfiles/CNUPAIR%m%d%H
# Synoptic reports
#
DDS|IDS ^S([IMN][^VW].*|XUS2[0-3]) .... ([0-3][0-9])([0-2][0-9])
PIPE /usr/local/ldm/decoders/dcsynop -a 2000 -v 1
-d data/gempak/logs/dcsynop_syn.log
-p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/sfsyn.pack
-s /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/stns/systns_upc.tbl
data/gempak/surface/YYYYMMDD_syn.gem
#
# buoy and ship reports in yymmdd.gem
#
DDS|IDS ^S([INS]V.*|MV[^NS].*) .... ([0-3][0-9])([0-2][0-9])
PIPE /usr/local/ldm/decoders/dcsynop -v 1
-d data/gempak/logs/dcsynop_sb.log
-p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/sfship.pack
data/gempak/surface/YYYYMMDD_sb.gem
#
# ngm Mos
#
DDPLUS ^FO(US14|AK1[34]|AK2[5-9]) .... ([0-3][0-9])([0-2][0-9])
PIPE /usr/local/ldm/decoders/dcnmos -v 1
-d data/gempak/logs/dcnmos.log
-p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/ngmmos.pack
-s /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/stns/ngmmos.stn
data/gempak/mos/YYYYMMDDHH_nmos.gem
#
#WMO ^FO(AK2[0-4]) K... ([0-3][0-9])([0-2][0-9])
# FILE data/gempak/nwx/mos/AKMOS\2.mrfmos
#
#WMO ^FO(AK2[5-9]) K... ([0-3][0-9])([0-2][0-9])
# FILE data/gempak/nwx/mos/AKMOS\2.ngmmos
#
#
#WMO ^FE(AK2[0-4]) K... ([0-3][0-9])([0-2][0-9])
# FILE data/gempak/nwx/mos/AKMOS\2.avnmos
#
# MRF Mos
#
DDPLUS ^(FOX[CESW].*|FOAK2[0-4]|FECN21) .... ([0-3][0-9])([0-2][0-9])
PIPE /usr/local/ldm/decoders/dcmmos -v 1
-d data/gempak/logs/dcmmos.log
-p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/mrfmos.pack
-s /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/stns/mrfmos.stn
data/gempak/mos/YYYYMMDDHH_mmos.gem
#
# AVN Mos
#
DDPLUS ^(FEX[CESW].*|FEAK2[0-4]|FECN20) .... ([0-3][0-9])([0-2][0-9])
PIPE /usr/local/ldm/decoders/dcamos -v 1
-d data/gempak/logs/dcamos.log
-p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/avnmos.pack
-s /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/stns/avnmos.stn
data/gempak/mos/YYYYMMDDHH_amos.gem
#
# SPC storm reports
#
#DDPLUS ^WWUS60 KMKC ([0-3][0-9])([0-2][0-9])
# PIPE -close /usr/local/ldm/decoders/dcstorm -m 2000
# -d data/gempak/logs/dcstorm.log
# -p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/sels.pack
# data/gempak/storm/sels/YYYYMMDD_sels.gem
#
# Watch box coordinates
#
DDPLUS ^WWUS40 KMKC ([0-3][0-9])([0-2][0-9])
PIPE /usr/local/ldm/decoders/dcwatch -v 1 -t 30
-d data/gempak/logs/dcwatch.log
-s /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/stns/sfworld.tbl
-p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/watch.pack
data/gempak/storm/watches/watches_YYYY_MM.gem
#
# Hurricane/tropical storm positions and forecasts
#
#DDPLUS ^WTPZ4.* .... ([0-3][0-9])([0-2][0-9])
# PIPE -close /usr/local/ldm/decoders/dctrop -v 1
# -d data/gempak/logs/dctrop.log
# -p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/tropic.pack
# data/gempak/storm/tropic/epacific/YYYY_@@.gem
#
#DDPLUS ^WTPN3.* .... ([0-3][0-9])([0-2][0-9])
# PIPE -close /usr/local/ldm/decoders/dctrop -v 1
# -d data/gempak/logs/dctrop.log
# -p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/tropic.pack
# data/gempak/storm/tropic/wpacific/YYYY_@@.gem
#
#DDPLUS ^WTNT4.* .... ([0-3][0-9])([0-2][0-9])
# PIPE -close /usr/local/ldm/decoders/dctrop -v 1
# -d data/gempak/logs/dctrop.log
# -p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/tropic.pack
# data/gempak/storm/tropic/atlantic/YYYY_@@.gem
#
#DDPLUS ^WTPA4.* .... ([0-3][0-9])([0-2][0-9])
# PIPE -close /usr/local/ldm/decoders/dctrop -v 1
# -d data/gempak/logs/dctrop.log
# -p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/tropic.pack
# data/gempak/storm/tropic/cpacific/YYYY_@@.gem
#
# flash flood guidence
#
#DDPLUS (^RGU[EMWS]..)|(^RGAK1[012])|(^FOAK4[38])|(^FOUS4[1-5])|(^FOUS[4-8]2
KALR)|(^FOUS[4-8]4 KORN)|(^FOUS[4-8]4 KTUA)
# PIPE /usr/local/ldm/decoders/dcffg -v 1
# -d data/gempak/logs/dcffg.log
# -p /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/pack/ffg.pack
# -s /export/home/gempak/NAWIPS-5.4/gempak5.4/tables/stns/ffgzon.stn
# data/gempak/storm/ffg/YYYYMMDD_ffg.gem
#
#
#####
# FSL NetCDF Wind Profiler
FSL2 ^FSL\.NetCDF\.NOAAnet\.windprofiler\.(01hr)\.(.*)\..*
PIPE -close /usr/local/ldm/decoders/dcncprof -v
-l data/gempak/logs/dcncprof.log
-e GEMTBL=/export/home/gempak/NAWIPS-5.4/gempak5.4/tables
data/gempak/profiler/YYYYMMDD_pro.gem
FSL2
^FSL\.NetCDF\.NOAAnet\.windprofiler\.(06min)\........(0[0-9]|1[01])..\..*
PIPE -close /usr/local/ldm/decoders/dcncprof -v
-l data/gempak/logs/dcncprof.log
-e GEMTBL=/export/home/gempak/NAWIPS-5.4/gempak5.4/tables
data/gempak/profiler/YYYYMMDD00_6min.gem
FSL2
^FSL\.NetCDF\.NOAAnet\.windprofiler\.(06min)\........(1[2-9]|2[0-3])..\..*
PIPE -close /usr/local/ldm/decoders/dcncprof -v
-l data/gempak/logs/dcncprof.log
-e GEMTBL=/export/home/gempak/NAWIPS-5.4/gempak5.4/tables
data/gempak/profiler/YYYYMMDD12_6min.gem
#####
# NMC2 feed
# MRF grids
#### HRS
# Put everything else (e.g. new products that we don't know about) in daily
# "else" file. Watch these to see when new products get added to HRS. Be
# sure to ignore HRS products above you aren't interested in or this file
# could get very large.
#
#HRS ^_ELSE_$ FILE data/GRIB/%m%d_else.wmo
#
#
#### MCIDAS
# Pattern/actions for the Unidata/Wisconsin (i.e. McIDAS) data stream.
# See the man page documentation for gunrv2, lwfile, lwtmd2, and lwtoa3
# for more info on how to customize these.
#
# Profiler:
#
# Hourly summary
FSL2 ^FSL\.NetCDF\.NOAAnet\.windprofiler\.01hr\.(.*)\..*
PIPE -close proftomd
-vl /usr/local/ldm/logs/ldmd.log
-d /var/data/ldm/mcidas U2 WPRO 81
# 6-minute
FSL2 ^^FSL\.NetCDF\.NOAAnet\.windprofiler\.06min\.(.*)\..*
PIPE -close proftomd
-vl /usr/local/ldm/logs/ldmd.log
-d /var/data/ldm/mcidas U6 WPR6 91
#### MCIDAS
# Pattern/actions for the Unidata/Wisconsin (i.e. McIDAS) data stream.
# See the man page documentation for gunrv2, lwfile, lwtmd2, and lwtoa3
# for more info on how to customize these.
#
# GRID files:
#
#MCIDAS ^(GUNRV2 .*)
# PIPE
# -close gunrv2 -v -d /var/data/ldm/mcidas
#
# Opaque files:
#
#MCIDAS ^(LWFILE .*) (ADMIN.MSG|UNIDATAS) .* DIALPROD=(..)
# PIPE
# -close lwfile -v -d /var/data/ldm/mcidas
#
# FSL hourly summary wind profiler data from netCDF in UW datastream
#
#MCIDAS ^(LWFILE .*) (PROFILER.CDF) .* DIALPROD=(..)
# PIPE
# -close cdfconvert \3 \2 81
#
# MD files:
#
#MCIDAS ^(LWTMD2 .*)
# PIPE
# -close lwtmd2 -v -d /var/data/ldm/mcidas
#
# AREA files:
#
MCIDAS ^(LWTOA3 .*)
PIPE
-close lwtoa3 -v -d /var/data/ldm/mcidas
#
# Entries for McIDAS-XCD decoders
DDPLUS|IDS ^.* PIPE
xcd_run DDS
HRS ^.* PIPE
xcd_run HRS
