[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[GEMPAK #SGQ-682303]: GDCNTR multiple grid files error



Could you re-send these program inputs either in .nts file or from the "l" 
printout rather than "d" printout?  as you've sent them I'm not able to 
copy/paste.  would save me a big chunk of time.

-mj



> bash-4.1$ oagrid
> GDFILE    Grid file                         testprecip1129.grd
> DELTAN    Station spacing                   2.82
> DELTAX    X spacing                         1.41
> DELTAY    Y spacing                         1.41
> GRDAREA   Area covered by grid              us
> EXTEND    Points to extend grid             2;2;2;2
> DTAAREA   Data area for OA
> SOURCE    Data source (SN or SF)            sf
> SNFILE    Sounding data file
> SFFILE    Surface data file                 
> /data/burns/data/gempak/surface/20141129_sao.gem
> SNPARM    Sounding parameter list           ;TMPC;;HGHT;DWPC;BRBM
> SFPARM    Surface parameter list            P24M
> DATTIM    Date/time                         1200
> LEVELS    Vertical levels                   500
> MAXGRD    Maximum number of grids           200
> Parameters requested: GDFILE,DELTAN,DELTAX,DELTAY,GRDAREA,EXTEND,DTAAREA,
> SOURCE,SNFILE,SFFILE,SNPARM,SFPARM,DATTIM,LEVELS,MAXGRD.
> 
> -> testprecip1130.grd was created in same way except gdfile 
> =testprecip1130.grd and sffile = 
> /data/burns/data/gempak/surface/20141130_sao.gem
> 
> bash-4.1$ oabsfc
> SFFILE    Surface data file                 
> /data/burns/data/gempak/surface/20141129_sao.gem
> GDFILE    Grid file                         testprecip1129.grd
> SFPARM    Surface parameter list            P24M
> DATTIM    Date/time                         1200
> DTAAREA   Data area for OA
> GUESS     Guess file
> GUESFUN   Guess grid
> GAMMA     Convergence parameter
> SEARCH    Search radius/Extrapolation
> NPASS     Number of passes                  2
> QCNTL     Quality control threshold
> OABND     Bounds file(s) to use for 'block
> GDATTIM   Grid date/time                    1200
> GFUNC     Scalar grid                       P24M
> GLEVEL    Grid level                        0
> GVCORD    Grid vertical coordinate          none
> Parameters requested: SFFILE,GDFILE,SFPARM,DATTIM,DTAAREA,GUESS,GUESFUN,
> GAMMA,SEARCH,NPASS,QCNTL,OABND,GDATTIM,GFUNC,GLEVEL,GVCORD.
> 
> -> barnes analysis was the same for testprecip1130 except sffile and gdfile
> 
> bash-4.1$ gdcntr
> GDATTIM   Grid date/time                    1200
> GLEVEL    Grid level                        0
> GVCORD    Grid vertical coordinate          none
> GFUNC     Scalar grid                       add(p24m,p24m+2)
> GDFILE    Grid file                         testprecip1129.grd + 
> testprecip1130.grd
> CINT      Contour interval/min/max          0
> LINE      Color/type/width/label/smth/fltr  3/1/1
> MAP       Map color/dash/width/filter flag  1
> MSCALE    fgc;bgc;mask/units/lat;hide/valu  0
> TITLE     Title color/line/title            1
> DEVICE    Device|name|x size;y size|color   xw
> SATFIL    Satellite image filename(s)
> RADFIL    Radar image filename(s)
> IMCBAR    Color/ornt/anch/x;y/ln;wd/freq
> PROJ      Map projection/angles/margins|dr  CED
> GAREA     Graphics area                     us -
> IJSKIP    Iskp;Istrt;Istp/Jskp;Jstrt;Jstp
> CLEAR     Clear screen flag                 y
> PANEL     Panel loc/color/dash/width/regn   0
> TEXT      Size/fnt/wdth/brdr/N-rot/just/hw  1
> SCALE     Scalar scale / vector scale       999
> LATLON    Line color/dash/width/freq/inc/l
> HILO      Color/symbol/rng/rad/cnt/intp     0
> HLSYM     HILO txt size/posn/font/wdth/hw   2;1//32//hw
> CLRBAR    Color/ornt/anch/x;y/ln;wd/freq|t  1
> CONTUR    Subbox/smooth                     3
> SKIP      Skip_cntr/skip_plt_x;skip_plt_y   0
> FINT      Fill interval/min/max             10
> FLINE     Fill colors/fill types            10-20
> CTYPE     Contour type:  C/F                f
> LUTFIL    Enhancement lookup table filenam
> STNPLT    Txtc/txt attr|marker attr|stnfil
> Parameters requested: GDATTIM,GLEVEL,GVCORD,GFUNC,GDFILE,CINT,LINE,MAP,
> MSCALE,TITLE,DEVICE,SATFIL,RADFIL,IMCBAR,PROJ,GAREA,IJSKIP,CLEAR,PANEL,TEXT,
> SCALE,LATLON,HILO,HLSYM,CLRBAR,CONTUR,SKIP,FINT,FLINE,CTYPE,LUTFIL,STNPLT.
> ________________________________________
> From: Unidata GEMPAK Support <address@hidden>
> Sent: Thursday, December 04, 2014 4:41 PM
> To: Griffin, Matthew
> Cc: address@hidden
> Subject: [GEMPAK #SGQ-682303]: GDCNTR multiple grid files error
> 
> Hi Matthew,
> 
> I'll need both grid files that you're using, plus the full GEMPAK program 
> input, either copy and paste the input or use "save tmp.nts" within the 
> program and send that file.  Small files can be attached to a reply to this 
> email.  Grid files should be uploaded to
> 
> http://motherlode.ucar.edu/repository/alias/gempakuploads/
> 
> -Michael
> 
> 
> > Description of problem: I am trying to add multiple grid files to the 
> > gdcntr function in gempak to obtain accumulated precipitation over several 
> > days.  These grid files were created using oagrid and oabsfc on surface 
> > metar data.  Each individual grid can be mapped when using this function 
> > but the error of "[DG -7] Input grid P24M ^141129/1200 @0 %NONE in ADD 
> > cannot be found" arises when attempting to add multiple files in gdfile.  
> > The gfunc used is ADD (P24M,P24M+2).  Any help on this would be appreciated.
> >
> >
> 
> Ticket Details
> ===================
> Ticket ID: SGQ-682303
> Department: Support GEMPAK
> Priority: Normal
> Status: Open
> 
> 


Ticket Details
===================
Ticket ID: SGQ-682303
Department: Support GEMPAK
Priority: Normal
Status: Open