[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[GEMPAK #VFW-525515]: A bit more about why the decoders might not be working....



Sure.

Any data being written to the correct $GEMDATA now?




> Thanks, Michael.  Great job.
> 
> So can I shut off rtstats in ldmd until we get a read on it?
> 
> Ray
> 
> On Thu, Dec 13, 2012 at 11:30 AM, Unidata GEMPAK Support
> <address@hidden> wrote:
> > Raymond,
> >
> > When I set SFFILE = $SAO/20121213_sao.gem sflist finds and reads the file.  
> > When I set SFIFLE = $GEMDATA/surface/20121213_sao.gem I can confirm it does 
> > not get found.
> >
> > This is tied to the bash shell not having $GEMDATA defined in "env", though 
> > it does return when you type "echo $GEMDATA".  The reason for this was a 
> > forgotten export command after the variable is defined in 
> > NAWIPS/Gemenviron.profile.  I added the export and re-sourced the file and 
> > tested with sflist and it worked.  It's one of those small but invisible 
> > problems that sometime take too long to find when scanning a file for 
> > errors.
> >
> > As for the RPC timeout on rtstats, I'm going to have our LDM developer read 
> > this over since what I can find in our support archives only speaks about a 
> > server-side issue.
> >
> >
> > Michael
> >
> >> Michael,
> >>
> >> Yep, appears to be working as ruc is now writing into model.
> >>
> >> I note that you have EXEC pqact.gempak running in ldmd.conf  so all
> >> those decoders are running on the REQUEST ANY?
> >>
> >> I guess I don't need to insert decoders in pqact.conf since they are
> >> running in pqact.gempak?
> >>
> >> I can say with some certainty that I would not have had the confidence
> >> to edit out the decoders/ and GEMTBL pointers.  I did have a guy in my
> >> office suggest making all the calls explicit but batch editing a bunch
> >> of decoder calls and I would have lost more sleep.
> >>
> >> I still think there is a bit of an issue in defining $GEMDATA..... it
> >> points explicitly to /mnt/sdb/var/data/gempak.   GEMPAK can't see the
> >> data as they are in /mnt/sdb/var/data/data/gempak.  I don't want to
> >> have to be changing the Gemenviron to fix $LDMDATA and $GEMDATA, no?
> >>
> >> I tried running GEMPAK and get file not found.   The GEMPAK env shows
> >> most of the nmemonics for GOES8 , NLDN, HDS, etc. pointing too far up
> >> in that directory.  /mnt/sdb/var/data/gempak  (not the double
> >> data/data tree).
> >>
> >> Any idea of why that is happening in LDM?
> >>
> >> Ray
> >>
> >>
> >>
> >>
> >>
> >> On Wed, Dec 12, 2012 at 1:28 PM, Unidata GEMPAK Support
> >> <address@hidden> wrote:
> >> > Raymond,
> >> >
> >> > I made a few edits to ldmd.conf and the pqact files pqact.conf and 
> >> > pqact.gempak.
> >> >
> >> > I think the root of the problem was the relative path name 
> >> > "decoders/dcgrib2" in the pattern actions for decoders.  I removed 
> >> > "decoders/" from all entries, and also changed GEMTBL in these files to 
> >> > point to "/home/gempak/NAWIPS/..." rather than 
> >> > "/home/gempak/GEMAK6.7.0/...", which isn't responsible for the problem, 
> >> > but is good practice for when upgrading to a new version .
> >> >
> >> > Lastly, I changed the EXEC lines in ldmd.conf to specific the feed type 
> >> > and pqact file using the fully-qualified pathname:
> >> >
> >> > EXEC    "pqact -f UNIDATA /usr/local/ldm/etc/pqact.conf"
> >> > EXEC    "pqact -f NGRID|CONDUIT|HDS /usr/local/ldm/etc/pqact.gempak"
> >> >
> >> > After this, I noticed model data decoded to ~ldm/data/data/gempak - 
> >> > still the double "data" in the path.
> >> >
> >> > I redefined LDMHOME in user gempak's Gemenviron.profile and re-sourced 
> >> > the file into the gempak user's environment, then restarted the ldm 
> >> > again from the ldm account.
> >> >
> >> > I have yet to see model data written to ~ldm/data/gempak/model/ but I'm 
> >> > going to keep it running for an hour or so and come back to look at it 
> >> > later.  Feel free to check it out and make adjustments as needed.  I 
> >> > have to go to a meeting and will check back in this afternoon.
> >> >
> >> > Michael
> >> >
> >> >
> >> >> Michael,
> >> >>
> >> >> I'm still stuck on this write problem with the GEMPAK decoders.  I
> >> >> have checked and double-checked the env variables and they seem fine
> >> >> and the permissions to write to the data/gempak/surface and
> >> >> data/gempak/log directory is 777 so anyone can write to it.
> >> >>
> >> >> Is there a way that I can invoke this decoder:
> >> >>
> >> >> WMO   ^S[AP]
> >> >> PIPE  decoders/dcmetr -v 2 -a 500 -m 72 -s sfmetar_sa.tbl
> >> >> -d data/gempak/logs/dcmetr.log
> >> >> -e GEMTBL=/home/gempak/GEMPAK6.7.0/gempak/tables
> >> >> data/gempak/surface/YYYYMMDD_sao.gem
> >> >>
> >> >> on a file rather than going through the PIPE to see specifically what
> >> >> is happening here.  Can I run decoders/dcmetr on a file to check this
> >> >> out?  Do you have a simple, few line test file that dcmetr should
> >> >> decode to /surface/YYYMMDD_sao.gem?
> >> >>
> >> >> Ray
> >> >>
> >> >> On Thu, Dec 6, 2012 at 1:20 PM, Unidata GEMPAK Support
> >> >> <address@hidden> wrote:
> >> >> > I'm going to suggest the sym link $OS_BIN to ~ldm/decoders be 
> >> >> > removes, and copy (as user ldm) all dc programs to the directory 
> >> >> > ~ldm/decoders/ "cp $OS_BIN/dc* ~ldm/decoders/.
> >> >> >
> >> >> > Then rehash or re-login and check with "which dcgrib2" and test your 
> >> >> > scripts again.  Might simply be a permission issue with user gempak 
> >> >> > owning the programs.
> >> >> >
> >> >> > And like you said, I'm also worried about the double ldm/data/data/ - 
> >> >> > send me back the current list of "env" from both gempak and ldm 
> >> >> > users, there's a conflict somewhere and I'm still not sure where.
> >> >> >
> >> >> > -Michael
> >> >> >
> >> >> >> Michael,
> >> >> >>
> >> >> >> If I cd to ~ldm/decoders and run a script it seems to start
> >> >> >>
> >> >> >> If I run the script as decoders/acprof,  I get errors....    See  
> >> >> >> >>>>>
> >> >> >>
> >> >> >> [ldm@awipserver decoders]$ acprof
> >> >> >> [IP -2]
> >> >> >> [IP -10] ACPROF
> >> >> >> Creating process: gplt for queue 294914
> >> >> >> [LV -3]
> >> >> >>
> >> >> >>
> >> >> >> ^C out of there....
> >> >> >>
> >> >> >> [ldm@awipserver decoders]$ cd ~
> >> >> >> [ldm@awipserver ~]$ decoders/acprof
> >> >> >> [IP -2]
> >> >> >> [IP -10] ACPROF
> >> >> >> [GEMPLT -101]
> >> >> >> [ACPROF -3]
> >> >> >> Error in message send = 22
> >> >> >> itype, ichan, nwords,0,294914,3
> >> >> >> [ldm@awipserver ~]$
> >> >> >>
> >> >> >> Maybe it won't run through the symbolic link?
> >> >> >>
> >> >> >> Ray
> >> >> >> On Wed, Dec 5, 2012 at 5:13 PM, Unidata GEMPAK Support
> >> >> >> <address@hidden> wrote:
> >> >> >> > As user ldm, confirm on login that the decoders are in your path: 
> >> >> >> > "which dcgrib2" should point to ~/decoders/dcgrib2 or 
> >> >> >> > $OS_BIN/dcgrib2
> >> >> >> >
> >> >> >> >
> >> >> >> >> Michael,
> >> >> >> >>
> >> >> >> >> Ok still did not get there......  I made a symbolic link to the
> >> >> >> >> directory pointed to by gempak $OS_BIN.  ldm tries to run them 
> >> >> >> >> out of
> >> >> >> >> the gempak directory.
> >> >> >> >>
> >> >> >> >> decoders -> /home/gempak/GEMPAK6.7.0/os/linux64/bin/
> >> >> >> >>
> >> >> >> >> All the dc files are permission 755  rwxr-xr-x  so ldm should be 
> >> >> >> >> able
> >> >> >> >> to run them.
> >> >> >> >>
> >> >> >> >> But if you look at the last ldmd.log  (attached) it says the 
> >> >> >> >> decoders
> >> >> >> >> don't run.   Barring moving them directly to the ldm/decoders
> >> >> >> >> directory, see anything else?
> >> >> >> >>
> >> >> >> >> All the decoder calls are preceded by a "No such file or 
> >> >> >> >> directory"
> >> >> >> >> but without going into the scripts for decoders/dcgrib2 for 
> >> >> >> >> example, I
> >> >> >> >> don't know what directory it is looking for.
> >> >> >> >>
> >> >> >> >> Ray
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> On Wed, Dec 5, 2012 at 3:01 PM, Unidata GEMPAK Support
> >> >> >> >> <address@hidden> wrote:
> >> >> >> >> > $LDMHOME for the gempak user must be able to read where the ldm 
> >> >> >> >> > is filing and decoding data.  This appears to be setup 
> >> >> >> >> > correctly on your system with the only change needed the 
> >> >> >> >> > directory ~ldm/decoders.
> >> >> >> >> >
> >> >> >> >> > However I don't see GEMDATA in 'env' for the gempak user, 
> >> >> >> >> > though from $HDS and other data environmental variables, it 
> >> >> >> >> > appears to be set.
> >> >> >> >> >
> >> >> >> >> > -Michael
> >> >> >> >> >
> >> >> >> >> >> Ok,
> >> >> >> >> >>
> >> >> >> >> >> I must have missed that instruction in the cookbook.  I'll 
> >> >> >> >> >> make that fix .
> >> >> >> >> >>
> >> >> >> >> >> The /usr/local/ldm/data   symbolic link then SHOULD (?) be to
> >> >> >> >> >> /mnt/sdb/ldm/var/data  ????
> >> >> >> >> >>
> >> >> >> >> >> Also ldm and gempak are separate users so why should ldm know 
> >> >> >> >> >> about
> >> >> >> >> >> the gempak environment variables?  Should they be separate or 
> >> >> >> >> >> in a
> >> >> >> >> >> group?  Could it be that gempak didn't write the decoders 
> >> >> >> >> >> because it
> >> >> >> >> >> didn't have permissions in the ldm group?
> >> >> >> >> >>
> >> >> >> >> >> Thanks, I'll try these fixes later today and let you know the 
> >> >> >> >> >> outcome .
> >> >> >> >> >>
> >> >> >> >> >> Ray
> >> >> >> >> >>
> >> >> >> >> >> On Wed, Dec 5, 2012 at 2:44 PM, Unidata GEMPAK Support
> >> >> >> >> >> <address@hidden> wrote:
> >> >> >> >> >> > I don't see a directory ~ldm/decoders to contain the dc* 
> >> >> >> >> >> > programs from $OS_BIN.  /usr/local/ldm/decoders is in the 
> >> >> >> >> >> > ldm user's $PATH, so it's looking there for decoders but not 
> >> >> >> >> >> > finding them.  This explains why some raw data were written 
> >> >> >> >> >> > - these pattern actions are using a FILE command rather than 
> >> >> >> >> >> > PIPE to a decoder.
> >> >> >> >> >> >
> >> >> >> >> >> > The solution is to copy all dc* programs from $OS_BIN to 
> >> >> >> >> >> > ~ldm/decoders, or to symlink the ~ldm/decoders directory to 
> >> >> >> >> >> > $OS_BIN.
> >> >> >> >> >> >
> >> >> >> >> >> > Michael
> >> >> >> >> >> >
> >> >> >> >> >> >> Michael,
> >> >> >> >> >> >>
> >> >> >> >> >> >> I took all the filters out of pqact.conf just so I could be 
> >> >> >> >> >> >> sure that
> >> >> >> >> >> >> the only calls I was making was to a GEMPAK needed file.   
> >> >> >> >> >> >> I actually
> >> >> >> >> >> >> had one IDS call open yesterday..... bad form I guess, but 
> >> >> >> >> >> >> that didn't
> >> >> >> >> >> >> stop pqact.gempak from running.
> >> >> >> >> >> >>
> >> >> >> >> >> >> Here is the LDM environment:
> >> >> >> >> >> >>
> >> >> >> >> >> >> [ldm@awipserver ~]$ env
> >> >> >> >> >> >> MANPATH=/usr/local/ldm:man:/usr/man
> >> >> >> >> >> >> HOSTNAME=awipserver.physics.umbc.edu
> >> >> >> >> >> >> TERM=xterm-color
> >> >> >> >> >> >> SHELL=/bin/bash
> >> >> >> >> >> >> HISTSIZE=1000
> >> >> >> >> >> >> SSH_CLIENT=130.85.163.143 49658 22
> >> >> >> >> >> >> SSH_TTY=/dev/pts/2
> >> >> >> >> >> >> USER=ldm
> >> >> >> >> >> >> LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=01;32:*.cmd=01;32:*.exe=01;32:*.com=01;32:*.btm=01;32:*.bat=01;32:*.sh=01;32:*.csh=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.bz=01;31:*.tz=01;31:*.rpm=01;31:*.cpio=01;31:*.jpg=01;35:*.gif=01;35:*.bmp=01;35:*.xbm=01;35:*.xpm=01;35:*.png=01;35:*.tif=01;35:
> >> >> >> >> >> >> MAIL=/var/spool/mail/ldm
> >> >> >> >> >> >> PATH=/usr/local/ldm/decoders:/usr/local/ldm/util:/usr/local/ldm:bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/ldm/bin
> >> >> >> >> >> >> INPUTRC=/etc/inputrc
> >> >> >> >> >> >> PWD=/usr/local/ldm
> >> >> >> >> >> >> LANG=en_US.UTF-8
> >> >> >> >> >> >> SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
> >> >> >> >> >> >> SHLVL=1
> >> >> >> >> >> >> HOME=/usr/local/ldm
> >> >> >> >> >> >> LOGNAME=ldm
> >> >> >> >> >> >> LDMHOME=/usr/local/ldm
> >> >> >> >> >> >> CVS_RSH=ssh
> >> >> >> >> >> >> SSH_CONNECTION=130.85.163.143 49658 130.85.163.219 22
> >> >> >> >> >> >> LESSOPEN=|/usr/bin/lesspipe.sh %s
> >> >> >> >> >> >> G_BROKEN_FILENAMES=1
> >> >> >> >> >> >> _=/bin/env
> >> >> >> >> >> >> [ldm@awipserver ~]$
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >> And, no, "does /usr/local/ldm/data point to 
> >> >> >> >> >> >> /mnt/sbd/var/ldm?"   No,
> >> >> >> >> >> >> it is  /usr/local/ldm/data > /usr/local/ldm/var/data ..... 
> >> >> >> >> >> >> It is using
> >> >> >> >> >> >> the var as a symbolic link and that should be changed so it 
> >> >> >> >> >> >> explicitly
> >> >> >> >> >> >> points to the right level on /mnt/sdb....
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >> So the symbolic link should be
> >> >> >> >> >> >>
> >> >> >> >> >> >> ln -s /mnt/sdb/ldm/var/data       data
> >> >> >> >> >> >>
> >> >> >> >> >> >> for the data symbolic link?
> >> >> >> >> >> >>
> >> >> >> >> >> >> the parallel structure on /mnt/sdb should be?????
> >> >> >> >> >> >>
> >> >> >> >> >> >> ldm
> >> >> >> >> >> >> var
> >> >> >> >> >> >> data    logs   queues?
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >> Here is the directory for /usr/local/ldm:
> >> >> >> >> >> >>
> >> >> >> >> >> >> lrwxrwxrwx 1 ldm  ldm    11 Nov 30 13:47 bin -> runtime/bin
> >> >> >> >> >> >> -rw-rw-r-- 1 ldm  ldm   214 Dec  3 14:22 crontab
> >> >> >> >> >> >> lrwxrwxrwx 1 ldm  ldm    23 Nov 30 13:47 data -> 
> >> >> >> >> >> >> /usr/local/ldm/var/data
> >> >> >> >> >> >> drwxr-xr-x 2 ldm  ldm  4096 Nov 30 13:26 Desktop
> >> >> >> >> >> >> drwxrwxr-x 2 ldm  ldm  4096 Dec  5 09:42 etc
> >> >> >> >> >> >> lrwxrwxrwx 1 ldm  ldm    15 Nov 30 13:47 include -> 
> >> >> >> >> >> >> runtime/include
> >> >> >> >> >> >> drwxr-xr-x 7 ldm  ldm  4096 Nov 30 13:46 ldm-6.11.1
> >> >> >> >> >> >> lrwxrwxrwx 1 ldm  ldm    11 Nov 30 13:47 lib -> runtime/lib
> >> >> >> >> >> >> lrwxrwxrwx 1 ldm  ldm    23 Nov 30 13:47 logs -> 
> >> >> >> >> >> >> /usr/local/ldm/var/logs
> >> >> >> >> >> >> lrwxrwxrwx 1 ldm  ldm    10 Dec  3 13:33 runtime -> 
> >> >> >> >> >> >> ldm-6.11.1
> >> >> >> >> >> >> lrwxrwxrwx 1 ldm  ldm    13 Nov 30 13:47 share -> 
> >> >> >> >> >> >> runtime/share
> >> >> >> >> >> >> lrwxrwxrwx 1 ldm  ldm    11 Nov 30 13:47 src -> runtime/src
> >> >> >> >> >> >> lrwxrwxrwx 1 root root   12 Dec  3 13:45 var -> /mnt/sdb/var
> >> >> >> >> >> >> -rw-rw-r-- 1 ldm  ldm    25 Dec  5 09:37 watch.txt
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >> Ray
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >> On Wed, Dec 5, 2012 at 2:20 PM, Unidata GEMPAK Support
> >> >> >> >> >> >> <address@hidden> wrote:
> >> >> >> >> >> >> > Hi Raymond,
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > Thanks for attaching the logs and environmental variable 
> >> >> >> >> >> >> > files.
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > The first thing noticed in ldmd.log is
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > Dec 05 14:35:36 awipserver pqact[19304] NOTE: 
> >> >> >> >> >> >> > Configuration-file "/usr/local/ldm/etc/pqact.conf" has no 
> >> >> >> >> >> >> > entries. You should probably not start this program 
> >> >> >> >> >> >> > instead.
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > Which suggests the pqact.conf isn't being taken 
> >> >> >> >> >> >> > correctly.  Even so, there are decoder entries in the log 
> >> >> >> >> >> >> > file such as:
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > Dec 05 14:35:36 awipserver pqact[19308] ERROR: 
> >> >> >> >> >> >> > [filel.c:1404] Couldn't execute decoder "decoders/dcnldn"
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > So I'm not entirely sure what the problem is, but I can 
> >> >> >> >> >> >> > guess that it's due to difference between data 
> >> >> >> >> >> >> > directories in the gempak and ldm users' environment.
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > What is 'env' os the user ldm, and does 
> >> >> >> >> >> >> > /usr/local/ldm/data point to /mnt/sbd/var/ldm?
> >> >> >> >> >> >> >
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > -Michael
> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> Michael,
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> Ok, I have LDM and GEMPAK running but not much is 
> >> >> >> >> >> >> >> getting decoded by
> >> >> >> >> >> >> >> pqact.gempak.   I suspect it is due to an incorrect 
> >> >> >> >> >> >> >> directory
> >> >> >> >> >> >> >> structure in the LDM directory.
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> What I've done:
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> 1) I have ldm and gempak as users on 
> >> >> >> >> >> >> >> awipsserver.physics.umbc.edu.
> >> >> >> >> >> >> >> ldm's home directory is /usr/local/ldm  (as suggested in 
> >> >> >> >> >> >> >> the ldm
> >> >> >> >> >> >> >> documentation).  gempak's home directory is /home/gempak 
> >> >> >> >> >> >> >>  (with other
> >> >> >> >> >> >> >> users)
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> 2)  If I run pqact.conf that comes with ldm, I can pull 
> >> >> >> >> >> >> >> feeds (see
> >> >> >> >> >> >> >> watch.txt attached) from idd.meteo.psu.edu and it looks 
> >> >> >> >> >> >> >> like the
> >> >> >> >> >> >> >> UNIDATA feed (and the UNIWISC) feeds work.
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> 3)  When I built ldm, I did not want the /var directory 
> >> >> >> >> >> >> >> on my main
> >> >> >> >> >> >> >> hard drive on the server, but I put it on a raid  
> >> >> >> >> >> >> >> (/mnt/sdb/var) and I
> >> >> >> >> >> >> >> symbolically linked /var and /data in ldm to point to 
> >> >> >> >> >> >> >> /mnt/sdb/var and
> >> >> >> >> >> >> >> /mnt/sdb/var/data).   That worked ok and the ldm data 
> >> >> >> >> >> >> >> was pushed to
> >> >> >> >> >> >> >> /mnt/sdb/var/data/surface/US.... for the demo pqact.conf 
> >> >> >> >> >> >> >> feeds from
> >> >> >> >> >> >> >> IDS.
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> 4) In GEMPAK, all built out ok (except for the /gf bug 
> >> >> >> >> >> >> >> that I sent
> >> >> >> >> >> >> >> previously) and GEMPAK runs fine.   I attach the env for 
> >> >> >> >> >> >> >> gempak.   I
> >> >> >> >> >> >> >> think the issue is here.   I left $GEMDATA as it was in 
> >> >> >> >> >> >> >> Gemenviron as
> >> >> >> >> >> >> >> it was built by the csh routine in GEMPAK.
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> setenv GEMDATA       /data/ldm/gempak
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> That seemed strange to me but it started putting the 
> >> >> >> >> >> >> >> gempak data in
> >> >> >> >> >> >> >> /usr/local/ldm/data/data/images/    etc....
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> I only got /images   /jason  and  /nwx  built in that 
> >> >> >> >> >> >> >> directory .
> >> >> >> >> >> >> >> /surface doesn't get decoded.    From the gempak_env, 
> >> >> >> >> >> >> >> you can see that
> >> >> >> >> >> >> >> it set up the /usr/local/ldm/data/data/gempak structure.
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> I attach a zipped version of the ldmd.log file with the 
> >> >> >> >> >> >> >> errors.  It
> >> >> >> >> >> >> >> looks like this is not feed related but the decoders are 
> >> >> >> >> >> >> >> not all
> >> >> >> >> >> >> >> working.
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> 5) To make GEMPAK read from the right files,  I had to 
> >> >> >> >> >> >> >> change the
> >> >> >> >> >> >> >> above Gemenviron variable to be
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> setenv GEMDATA      /usr/local/ldm/data/data/gempak
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> and then GEMPAK could go and get the data that was 
> >> >> >> >> >> >> >> available (images
> >> >> >> >> >> >> >> mostly.... the GOES data is coming in ok.)
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> Suggestions on how to fix the Gemenviron file (also 
> >> >> >> >> >> >> >> attached)?
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> Ray
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> --
> >> >> >> >> >> >> >> Raymond M. Hoff
> >> >> >> >> >> >> >> Professor of Physics
> >> >> >> >> >> >> >> Rm 426, Physics Dept.
> >> >> >> >> >> >> >> University of Maryland, Baltimore County
> >> >> >> >> >> >> >> 1000 Hilltop Circle
> >> >> >> >> >> >> >> Baltimore MD 21250
> >> >> >> >> >> >> >> p: 410-455-1943 f:410-455-1042
> >> >> >> >> >> >> >> e: address@hidden
> >> >> >> >> >> >> >> physics.umbc.edu/~hoff
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > Ticket Details
> >> >> >> >> >> >> > ===================
> >> >> >> >> >> >> > Ticket ID: XDH-337278
> >> >> >> >> >> >> > Department: Support GEMPAK
> >> >> >> >> >> >> > Priority: Normal
> >> >> >> >> >> >> > Status: Open
> >> >> >> >> >> >> >
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >> --
> >> >> >> >> >> >> Raymond M. Hoff
> >> >> >> >> >> >> Professor of Physics
> >> >> >> >> >> >> Rm 426, Physics Dept.
> >> >> >> >> >> >> University of Maryland, Baltimore County
> >> >> >> >> >> >> 1000 Hilltop Circle
> >> >> >> >> >> >> Baltimore MD 21250
> >> >> >> >> >> >> p: 410-455-1943 f:410-455-1042
> >> >> >> >> >> >> e: address@hidden
> >> >> >> >> >> >> physics.umbc.edu/~hoff
> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >> >
> >> >> >> >> >> >
> >> >> >> >> >> > Ticket Details
> >> >> >> >> >> > ===================
> >> >> >> >> >> > Ticket ID: XDH-337278
> >> >> >> >> >> > Department: Support GEMPAK
> >> >> >> >> >> > Priority: Normal
> >> >> >> >> >> > Status: Open
> >> >> >> >> >> >
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >> --
> >> >> >> >> >> Raymond M. Hoff
> >> >> >> >> >> Professor of Physics
> >> >> >> >> >> Rm 426, Physics Dept.
> >> >> >> >> >> University of Maryland, Baltimore County
> >> >> >> >> >> 1000 Hilltop Circle
> >> >> >> >> >> Baltimore MD 21250
> >> >> >> >> >> p: 410-455-1943 f:410-455-1042
> >> >> >> >> >> e: address@hidden
> >> >> >> >> >> physics.umbc.edu/~hoff
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > Ticket Details
> >> >> >> >> > ===================
> >> >> >> >> > Ticket ID: XDH-337278
> >> >> >> >> > Department: Support GEMPAK
> >> >> >> >> > Priority: Normal
> >> >> >> >> > Status: Open
> >> >> >> >> >
> >> >> >> >>
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> --
> >> >> >> >> Raymond M. Hoff
> >> >> >> >> Professor of Physics
> >> >> >> >> Rm 426, Physics Dept.
> >> >> >> >> University of Maryland, Baltimore County
> >> >> >> >> 1000 Hilltop Circle
> >> >> >> >> Baltimore MD 21250
> >> >> >> >> p: 410-455-1943 f:410-455-1042
> >> >> >> >> e: address@hidden
> >> >> >> >> physics.umbc.edu/~hoff
> >> >> >> >>
> >> >> >> >>
> >> >> >> >
> >> >> >> >
> >> >> >> > Ticket Details
> >> >> >> > ===================
> >> >> >> > Ticket ID: XDH-337278
> >> >> >> > Department: Support GEMPAK
> >> >> >> > Priority: Normal
> >> >> >> > Status: Open
> >> >> >> >
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> --
> >> >> >> Raymond M. Hoff
> >> >> >> Professor of Physics
> >> >> >> Rm 426, Physics Dept.
> >> >> >> University of Maryland, Baltimore County
> >> >> >> 1000 Hilltop Circle
> >> >> >> Baltimore MD 21250
> >> >> >> p: 410-455-1943 f:410-455-1042
> >> >> >> e: address@hidden
> >> >> >> physics.umbc.edu/~hoff
> >> >> >>
> >> >> >>
> >> >> >
> >> >> >
> >> >> > Ticket Details
> >> >> > ===================
> >> >> > Ticket ID: VFW-525515
> >> >> > Department: Support GEMPAK
> >> >> > Priority: Normal
> >> >> > Status: Open
> >> >> >
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> Raymond M. Hoff
> >> >> Professor of Physics
> >> >> Rm 426, Physics Dept.
> >> >> University of Maryland, Baltimore County
> >> >> 1000 Hilltop Circle
> >> >> Baltimore MD 21250
> >> >> p: 410-455-1943 f:410-455-1042
> >> >> e: address@hidden
> >> >> physics.umbc.edu/~hoff
> >> >>
> >> >>
> >> >
> >> > Ticket Details
> >> > ===================
> >> > Ticket ID: VFW-525515
> >> > Department: Support GEMPAK
> >> > Priority: Normal
> >> > Status: Open
> >> >
> >>
> >>
> >>
> >> --
> >> Raymond M. Hoff
> >> Professor of Physics
> >> Rm 426, Physics Dept.
> >> University of Maryland, Baltimore County
> >> 1000 Hilltop Circle
> >> Baltimore MD 21250
> >> p: 410-455-1943 f:410-455-1042
> >> e: address@hidden
> >> physics.umbc.edu/~hoff
> >>
> >>
> >
> > Ticket Details
> > ===================
> > Ticket ID: VFW-525515
> > Department: Support GEMPAK
> > Priority: Normal
> > Status: Open
> >
> 
> 
> 
> --
> Raymond M. Hoff
> Professor of Physics
> Rm 426, Physics Dept.
> University of Maryland, Baltimore County
> 1000 Hilltop Circle
> Baltimore MD 21250
> p: 410-455-1943 f:410-455-1042
> e: address@hidden
> physics.umbc.edu/~hoff
> 
> 


Ticket Details
===================
Ticket ID: VFW-525515
Department: Support GEMPAK
Priority: Normal
Status: Open