[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[GEMPAK #EQC-771253]: dcgrib2 dumps core on GRIB2 GFS 1 deg grids

Robert,

It may be that the jasper/jpeg 2000 libraries aren't playing well with the 
compiler flag.
That would limit the problem outside of the other programs (except nagrib2).

I will have to test the compiler options as affecting those 3rd party libraries.


Steve Chiswell
Unidata User Support


> It looks like the old Sun compiler optimization issue.  I was able to get it 
> to work by first compiling GEMPAK without optimization and then setting the 
> dcgrib2 binary aside, recompiling GEMPAK with -xO2, then copying the 
> unoptimized dcgrib2 back into $GEMEXE,
> 
> Hopefully there aren't any other GEMPAK programs affected.  I haven't found 
> any.
> 
> Thanks,
> Robert Mullenax
> 
> 
> 
> -----Original Message-----
> From: Robert Mullenax
> Sent: Thu 4/12/2007 8:25 PM
> To: address@hidden
> Subject: RE: [GEMPAK #EQC-771253]: dcgrib2 dumps core on GRIB2 GFS 1 deg grids
> 
> Steve,
> 
> Sorry I ran it with no -v just dcgrib2 filename and it coredumped.  I reran 
> it using Unidata binary and -v 4.  Same thing.
> 
> /usr2/config/temp% cat gfs.t12z.pgrbf00.grib2 | dcgrib2 -v 4 
> YYYYMMDDHH_test.gem
> Opening WMO Originating Center Table wmocenter.tbl...
> Opening WMO GRIB2 Parameter Table g2varswmo2.tbl...
> Opening WMO GRIB2 Vertical Coordinate Table g2vcrdwmo2.tbl...
> 
> SECTION 0 - INDICATOR SECTION
> IS byte        7 (discipline) = 0
> IS byte        8 (edition)    = 2
> 
> SECTION 1 - IDENTIFICATION SECTION
> IDS bytes  6 -  7 (orig center)      = 7
> IDS bytes  8 -  9 (sub center)       = 0
> IDS byte       10 (Master table ver) = 2
> IDS byte       11 (Local table ver)  = 1
> IDS byte       12 (ref time sig.)    = 1
> IDS bytes 13 - 14 (Year)             = 2007
> IDS byte       15 (Month)            = 4
> IDS byte       16 (Day)              = 12
> IDS byte       17 (Hour)             = 12
> IDS byte       18 (Minute)           = 0
> IDS byte       19 (Second)           = 0
> IDS byte       20 (Prod status)      = 0
> IDS byte       21 (type of data)     = 1
> 
> SECTION 3 - GRID DEFINITION SECTION
> GDS byte        6 (src of grid def) = 0
> GDS bytes  7 - 10 (no. of grid pts) = 65160
> GDS byte       11 (nb per opt list) = 0
> GDS byte       12 (interp opt list) = 0
> Grid Definition Template 3.0:  6 0 0 0 0 0 0 360 181 0 0 90000000 0 48 
> -90000000 359000000 1000000 1000000 0
> GDS bytes 31 - 34 (Nx)            = 360
> GDS bytes 35 - 38 (Ny)            = 181
> GDS bytes 47 - 50 (La1)           = 90.000000
> GDS bytes 51 - 54 (Lo1)           = 0.000000
> GDS byte       55 (res flag)      = 48
> GDS bytes 56 - 59 (La2)           = -90.000000
> GDS bytes 60 - 63 (Lo2)           = 359.000000
> GDS bytes 64 - 67 (Di)            = 1.000000
> GDS bytes 68 - 71 (Dj)            = 1.000000
> GDS byte       72 (mode)          = 0
> 
> SECTION 4 - PRODUCT DEFINITION SECTION
> PDS bytes  6 -  7 (no. of coords) = 0
> Product Definition Template 4.0:  3 5 2 0 81 0 0 1 0 100 0 100000 255 0 0
> 
> SECTION 5 - DATA REPRESENTATION SECTION
> DRS bytes  6 -  9 (no. of data points) = 65160
> Data Representation Template 5.40:  -980191232 0 1 14 0 0 255
> 
> SECTION 6 - BIT-MAP SECTION
> BMS byte        6 (bit-map indicator) = 255
> 
> Segmentation fault (core dumped)
> /usr2/config/temp%
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Unidata GEMPAK Support [mailto:address@hidden]
> Sent: Thu 4/12/2007 5:35 PM
> To: Robert Mullenax
> Cc: address@hidden
> Subject: [GEMPAK #EQC-771253]: dcgrib2 dumps core on GRIB2 GFS 1 deg grids
> 
> Robert,
> 
> Your syntax for running the dc decoders is wrong. You need to use "-v #"
> where # is a number from 1 to 4. Instead, you have the output file
> template where the verbose level should go.
> 
> Steve Chiswell
> Unidata User Support
> 
> >
> > Steve,
> >
> > I downloaded and installed the Unidata 5.10.2 Solaris x86 binary and it 
> > core dumps also.  Do you have a Solaris x86 box you can test it on?
> >
> > /usr/gempak/upc/GEMPAK5.10.2/os/x86/bin/dcgrib2
> > /usr2/config/temp% cat gfs.t12z.pgrbf00.grib2 | dcgrib2 -v 
> > YYYYMMDDHH_test.gem
> > Opening WMO Originating Center Table wmocenter.tbl...
> > Opening WMO GRIB2 Parameter Table g2varswmo2.tbl...
> > Opening WMO GRIB2 Vertical Coordinate Table g2vcrdwmo2.tbl...
> > Segmentation fault (core dumped)
> > /usr2/config/temp% which dcgrib2
> > /usr/gempak/upc/GEMPAK5.10.2/os/x86/bin/dcgrib2
> > /usr2/config/temp% ls
> > core                     logs/                    gfs.t12z.pgrbf00.grib2
> >
> >
> > Thanks,
> > Robert Mullenax
> > CSBF Meteorology
> >
> >
> > -----Original Message-----
> > From: Unidata GEMPAK Support [mailto:address@hidden]
> > Sent: Thu 4/12/2007 3:25 PM
> > To: Robert Mullenax
> > Cc: address@hidden
> > Subject: [GEMPAK #EQC-771253]: dcgrib2 dumps core on GRIB2 GFS 1 deg grids
> >
> > Robert,
> >
> > Works for me, as it should since we are decoding all the 0.5 degree grib 2 
> > files
> > from CONDUIT as well.
> >
> > Make sure you ftp in binary mode!
> >
> > ftp> bin
> > 200 Type set to I
> > ftp> get  gfs.t12z.pgrbf03.grib2
> > local: gfs.t12z.pgrbf03.grib2 remote: gfs.t12z.pgrbf03.grib2
> >
> >
> > > cat gfs.t12z.pgrbf03.grib2 | dcgrib2 -v 1 -d - YYYYMMDDHH_gfs.gem
> > [12049493] 070412/1419[DC 3]  Starting up. Version 5.10.2
> > Opening WMO Originating Center Table wmocenter.tbl...
> > Opening WMO GRIB2 Parameter Table g2varswmo2.tbl...
> > Opening WMO GRIB2 Vertical Coordinate Table g2vcrdwmo2.tbl...
> > [12049493] 070412/1419[DCGRIB 0] Opened 2007041212_gfs.gem model:96 grid:255
> > [12049493] 070412/1419[DECODE_GRIB2 0] HGHT [070412/1200F003] 1000:-1 PRES 
> > 360 181
> > [12049493] 070412/1419[DECODE_GRIB2 0] HGHT [070412/1200F003] 975:-1 PRES 
> > 360 181
> > [12049493] 070412/1419[DECODE_GRIB2 0] HGHT [070412/1200F003] 950:-1 PRES 
> > 360 181
> > [12049493] 070412/1419[DECODE_GRIB2 0] HGHT [070412/1200F003] 925:-1 PRES 
> > 360 181
> > [12049493] 070412/1419[DECODE_GRIB2 0] HGHT [070412/1200F003] 900:-1 PRES 
> > 360 181
> >
> > etc.....
> >
> > Steve Chiswell
> > Unidata User Support
> >
> >
> > >
> > > I am trying to ftp GRIB2 format GFS 1 deg grib files and decode them from 
> > > ftpprd, but GEMPAK 5.9.3 and 5.10.2 both core dump when I cat the 
> > > downloaded file into dcgrib2.  Would it be possible for you to try to 
> > > duplicate this?  The files can be retrieved from:
> > >
> > > ftpprd.ncep.noaa.gov
> > >
> > > /pub/data/nccf/com/gfs/prod/gfs........
> > >
> > > the file is e.g. gfs.t12z.pgrbf03.grib2
> > >
> > > Thanks,
> > > Robert Mullenax
> > > CSBF Meteorology
> > >
> > >
> >
> >
> > Ticket Details
> > ===================
> > Ticket ID: EQC-771253
> > Department: Support GEMPAK
> > Priority: Normal
> > Status: Closed
> >
> >
> >
> >
> 
> 
> Ticket Details
> ===================
> Ticket ID: EQC-771253
> Department: Support GEMPAK
> Priority: Normal
> Status: Closed
> 
> 
> 
> 
> 


Ticket Details
===================
Ticket ID: EQC-771253
Department: Support GEMPAK
Priority: Normal
Status: Closed