[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20050823: $GARPHOME/config/Garp_defaults



Hi David,

Steve Chiswell, our GEMPAK guru, is away on vacation...I run GEMPAK on
Solaris x86, so I hope I can help out some..

I am attaching the Garp_defaults file from:

$GARPHOME/config/Garp_defaults

I hope this helps.

Cheers,

Jeff
---------------------------------------------------------------------
Jeff Weber                                    address@hidden        :
Unidata Program Center                        PH:303-497-8676        :
University Corp for Atmospheric Research      3300 Mitchell Ln       :
http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-3000  :
---------------------------------------------------------------------

On Tue, 23 Aug 2005, Steve Emmerson wrote:

> Guys,
>
> Can you help David?  I have no idea what he's talking about.  :-(
>
> Regards,
> Steve Emmerson
>
> ------- Original Message
>
> Date:    Mon, 22 Aug 2005 16:39:44 -0500
> From:    David Magee <address@hidden>To:      Steve Emmerson <steve@unidata.u
>         car.edu>
> Subject: $GARPHOME/config/Garp_defaults
>
>
>
> Steve-
>
>        would you mind sending me an example of
> the file contents for $GARPHOME/config/Garp_defaults ?
>
> I'm trying to get gemapk 5.8.3a running on Sun Sparc /solaris 10
> and it's going to drive me crazy!  I've got plenty of ldm experience,
> but no gempak experience.  OJT is tough on this one!!  :)
>
> Thanks-
>
> David
>
>
> ------- End of Original Message
>
#
# Garp configuration file
#  VERSION 2.0
#
# The syntax needed in the file is:
#
#  token : resource
#
#  where: 
#
#         - token is defined as a string delimited by white space or ","
#         - the delimiter between token and resource is the :,
#         - no white space needs to surround the delimiter,
#         - comments are indicated by a #,
#           neither token nor resource can begin with a # or :,
#           however a # or a : can be embedded within resource,
#         - resource can contain white space if it is bounded by
#           the ' or " characters,
#         - blank lines are allowed.
#         - referbacks are indicated by $(...). The '...' is resolved
#           the same way any other token is, and is substituted for
#           the $(...) string to compose the final resource value.
#         - Multiple referbacks are allowed in a resource, but
#           embedded referbacks are not allowed  (i.e. no
#           $($(...)) allowed).
#         - case for the token is significant
# LOG:
# D.Himes/COMET  4/96    Beta dist version
# P.Bruehl/NWS   4/96    Documented, reorganized
# P.Bruehl/NWS   5/96    Added SD's keys for file names
# P.Bruehl/NWS   5/96   Updated for GARP release 0.1
# P.Bruehl/NWS   8/96   Updated for GARP release 0.2
# J.Cowie/NWS   10/96   Updated for GARP release 1.0
# S.Drake/COMET  1/97   Added keys for upper air profile object.
# P.Bruehl/NWS   1/97    Updated for GARP 1.03 release
# S.Drake/COMET  4/97    Added keys for 1.0.4
# P.Bruehl/NWS   4/97    Updated for GARP 1.04 release
# S.Chiswell/Unidata 5/97 New & corrected map areas and projections
# S.Drake/COMET  7/97    Added keys for GARP release 2.0
# S.Drake/COMET 10/98   Added wind profiler keys for release 2.02
# S.Drake/COMET  8/99   Removed chapter "default" from FDF directories
# S.Chiswell/Unidata 5/97 New!! Added use of GEMPAK template datatype.tbl
#                       file for grids so that models don't have to be
#                       stored all in the same directory.
#                       Garp will seach datatype.tbl first for modelkey,
#                       then use the old directory search if not found
#                       in the GEMPAK template file.
#-----------------------------------------------------------------------
#
#  Data directory Structures
#  Case is important
#  Configure these to match your data directory structure
#  (Surface data directories defined later)
#
GARPHOME        : $(NAWIPS)/comet/garp/

SATDIR          : $(SAT)
RADDIR          : $(RAD)
grids           : $(HDS)
upperair        : $(GEMDATA)/upperair
profiler        : $(GEMDATA)/profiler

#
#  Provide extra information for the satellite data
#
#  List each individual satellite directory
#  Multiple entries are space separated
#
G7    : "$(SATDIR)/GOES-7"
G8    : "$(SATDIR)/GOES-8"
G9    : "$(SATDIR)/GOES-9"
G10   : "$(SATDIR)/GOES-10"
G11   : "$(SATDIR)/GOES-11"
G12   : "$(SATDIR)/GOES-12"
FLOAT1 : "$(SATDIR)/GOES-8_fl1 $(SATDIR)/GOES-9_fl1 $(SATDIR)/GOES-10_fl1 
$(SATDIR)/GOES-12_fl1"
FLOAT2 : "$(SATDIR)/GOES-8_fl2 $(SATDIR)/GOES-9_fl2 $(SATDIR)/GOES-10_fl2 
$(SATDIR)/GOES-12_fl2"
SPOLE  : "$(SATDIR)/ANTARCTIC"
GINI : "$(SATDIR)/WEST-CONUS $(SATDIR)/EAST-CONUS $(SATDIR)/Colorado 
$(SATDIR)/AK-NATIONAL $(SATDIR)/AK-REGIONAL $(SATDIR)/HI-NATIONAL 
$(SATDIR)/HI-REGIONAL $(SATDIR)/PR-NATIONAL $(SATDIR)/PR-REGIONAL 
$(SATDIR)/SUPER-NATIONAL $(SATDIR)/NHEM-COMP $(SATDIR)/NHEM-MULTICOMP"
COMPOSITE : "$(SATDIR)/RADAR"
MDR   : "$(SAT)/MDR"
GSOUND : "$(SAT)/SOUNDER"

#
#  sat, nids, and nowrad are the "keys" that are used to find
#  the image data directories
#
#  Be sure each individual satellite directory listed above is in
#  the "sat" key list
#
sat             : "$(G7) $(G8) $(G10) $(G11) $(G12) $(GINI) $(FLOAT1) $(FLOAT2) 
$(SPOLE) $(GSOUND) $(COMPOSITE)"
nids            : $(RADDIR)/NIDS
#nowrad          : $(RADDIR)/USRAD
nowrad          : "$(RADDIR)/USRAD $(RADDIR)/NEXRCOMP $(RADDIR)/RADAR"

#
#  File name keys
#  Upper air & profile only
#  (keys for surface and model data files are defined later)
#
#  These key values correspond to the "type" substring in the file 
#  name convention for a upper air & profile data types.  For example,
#  YYMMDD_"type".gem
#
#  Note, you must choose a unique key value to describe each data type.
#  For example the key "upa" will match ALL data filenames containing 
#  the string "upa".
#
upperairK       : upa
profilerK       : 6min

#
# Dynamically generated menus.
#
# Models, Vertical coordinates, Color contours, Color fill tables, 
# Font types & sizes, Station Overlays, Surface keys, Markers, 
# Image Maps, Geographical areas & projections, FDF chapters, line
# parameters, vector symbols, x-sec vertical axes, vertical 
# profile vert axes, time/height time axes.
#-------------------------------------------------------------
# Models
#
#
# NEW!!!!!! 10/14/04
# modelkeys now checks the $GEMTBL/config/datatype.tbl template file
# first for the directory and file naming template first!
# This allows grids to be in different directories and use different
# naming convention depending on model. If the modelkey is not
# a known template, then the behavior defaults to looking
# for the unique string in the Garp defined grid directory.
#
# List all models for GARP to display.  Objective Analysis grids
# are OK.  Make up a name for "modellabels". The corresponding 
# string in "modelkeys" must make a unique match to files in the
# $(grids) directory.
#
# For example, the string "eta" matches YYMMDDHH_eta.gem *and* 
# YYMMDDHH_mesoeta.gem. Better choices are "_mesoeta" and "_eta".
#
modelkeys       : 
"gfs,avn003,eta,eta212,eta104,dgex,mrf1,mrf2,ngm,ruc,ruc2,ens,gdas,ukmet,ecmwfg,cmc,nogaps,rsas,wseta"

modellabels     : "GFS thinned,GFS 003,Eta 211,Eta 212,Eta 
104,DGEX,MRF,MRF_EXT,NGM,RUC,RUC II,Ensemble,GDAS,UK Met,ECMWF,CMC 
GEM,NOGAPS,RSAS,WSETA"
#
#-------------------------------------------------------------
# Vertical coordinate keys for plan view.
#
vcoordkeys      : "pres,sgma,thta,hght,none,none,hagl,pagl,frzl,trop,mwsl,pdly"
vcoordlabels    : "Pressure,Sigma,Isentropic,Height,Surface,None,Hght agl,Press 
agl,Freezing Lvl,Tropopause,Max Wind Speed,PRES Layer"
#
#-------------------------------------------------------------
# Vertical coordinate keys for vertical profiles.
#
vpvcoordkeys    : "pres,sgma,thta,hght"
vpvcoordlabels  : "Pressure,Sigma,Isentropic,Height"
#
#-------------------------------------------------------------
# List colors to be used for contour lines, symbols, etc. 
# Use no more that 10 GEMPAK colors in list.
#
colorlist       : "3,6,5,2,4,7,8"
#
#-------------------------------------------------------------
# Color fill tables
#
#colorfillkeys  : 
"0;23-15,0;25;24;29;7;15,0;21-30;14-20;5,0;24;30;14;2,0;23;22;21;2"
#colorfilllabels        : "Table 1,Table 2,Table 3,Table 4,Table 5"
colorfillkeys   : 
"0;21-30,0;14-20,25;24;29;7;15,0;21-30;14-20;5,0;24;30;14;2,0;23;22;21;2"
colorfilllabels : "Cool,Hot,Table 1,Table 2,Table 3,Table 4"
#
#-------------------------------------------------------------
# Font type, size and hardware/software flag.  (See "Font" entry
# in Chapter 3 of the NAWIPS Users Manual for help.)
#
text_size       : 1.3
text_font       : 21
text_width      : 1
text_hw_flag    : hw
#
#-------------------------------------------------------------
# Station overlays
#
stn_tables: "0,1,2,3,4,5,6,7"
stn_labels: "Surface Airways,WFO,NEXRAD,Wind Profiler,Upper Air 
Stations,Counties,Local,Cities"
#-------------------------------------------------------------
# Surface keys 
#
# sfc_keys - Strings corresponding to the unique "type" substring in
#  the filename convention for a given surface data type.  
#  For example, YYMMDD_"type".gem: 980101_sao.gem, 980101_shb.gem
#
# sfc_labels - Labels corresponding to above sfc_keys.
#
# sfc_tables - Tables containing complete list of all valid parameters
#   for a given surface data type.  Corresponds to sfc_keys and sfc_labels.
#
# xxx_dir - Directory containing surface data files of the xxx type
# xxx_parms - Default list of parameters plotted for the xxx data type
#
# Examples:
# sfc_keys: "surf,shb,amos,mmos,nmos,ffg,sels,ltg"
# sfc_labels: "METAR,Ship/Buoy,AVN MOS,MRF MOS,NGM MOS,Flash Flood,Storm 
Warnings,Lightning"
# sfc_tables: 
"sfcparms.lst,shbparms.lst,amosparms.lst,mmosparms.lst,nmosparms.lst,
# ffgparms.lst,selsparms.lst,"
# surf_dir : $(METDAT)/gempak/surface
# shb_dir : $(METDAT)/gempak/surface
# amos_dir : $(METDAT)/gempak/mos
# nmos_dir : $(METDAT)/gempak/mos
# mmos_dir : $(METDAT)/gempak/mos
# ffg_dir : $(METDAT)/gempak/flood
# sels_dir : $(METDAT)/gempak/storm
# surf_parms: 
"SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;P03C;DWPF;P03I;BLNK;BLNK;BLNK;BRBK:1.0:1"
# shb_parms: "SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;BLNK;WPER;WHGT;SSTC;BRBK:1.0:1"
# amos_parms: "BLNK;TMPF;BLNK;CLCT;BLNK;PP12"
# mmos_parms: "SKNT;TMPF;BLNK;CLCT;BLNK;PP12;PP24"
# nmos_parms: "SKYC:1.0:1;TMPF;BLNK;CLCT;BLNK;PP12;PP06"
# ffg_parms: "STID;ff01;BLNK;ff06;BLNK;ff03;ff12;BLNK;ff24"
# sels_parms: "STID"
#
sfc_keys : "sao,syn,sb,gmos,xmos,nmos,ffg,nldn"
sfc_labels : "METAR,Synoptic,Ship / Buoy,GFS MOS,GFSX MOS,NGM MOS,Flash 
Flood,Lightning"
sfc_tables : 
"sfcparms.lst,shbparms.lst,shbparms.lst,gmosparms.lst,xmosparms.lst,nmosparms.lst,ffgparms.lst,nldn.lst"
sao_dir : $(GEMDATA)/surface
syn_dir : $(GEMDATA)/syn
sb_dir : $(GEMDATA)/ship
gmos_dir : $(GEMDATA)/mos
xmos_dir : $(GEMDATA)/mos
nmos_dir : $(GEMDATA)/mos
ffg_dir : $(GEMDATA)/storm/ffg
nldn_dir : $(GEMDATA)/nldn
sao_parms: 
"SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;P03C;DWPF;P03I;BLNK;BLNK;BLNK;BRBK:1.0:1"
syn_parms: 
"SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;P03C;DWPF;P03I;BLNK;BLNK;BLNK;BRBK:1.0:1"
sb_parms: "SKYC:1.0:1;TMPF;WSYM:1.0:1;SMSL;BLNK;WPER;WHGT;SSTC;BRBK:1.0:1"
gmos_parms: "BLNK;TMPF;BLNK;CLCT;BLNK;PP12"
xmos_parms: "SKNT;TMPF;BLNK;CLCT;BLNK;PP12;PP24"
nmos_parms: "SKYC:1.0:1;TMPF;BLNK;CLCT;BLNK;PP12;PP06"
ffg_parms: "STID;ff01;BLNK;ff06;BLNK;ff03;ff12;BLNK;ff24"
ltg_parms: "POLR"
nldn_parms: "STID"
#
#-------------------------------------------------------------
# Suface Markers & Filter factor
#
# List of available marker types and the corresponding labels.
# (See "Marker" entry in Chapter 3 of the NAWIPS Users Guide
# for help.)
#
# Default filter factor for surface data. 1 = no overlaping
# stations; 0 = all stations plotted, regardless of overlap.
# (See "Filter" entry in Chapter 3 of the NAWIPS Users Guide
# for help.)
#
sfc_markers: "3,4,6,14"
sfc_marker_labels: "Triangle,Box,Diamond,Star"
sfc_filter: 1
#
#-------------------------------------------------------------
# Image maps
#
# Background images that you can plot along with model and obs
# data.  You may have to manually select the color enhancement 
# (unidat_top) for these images.
#
# NOTE that these are IMAGES, and can't be combined (yet) with 
# other images such as satellite or radar data.  
#
# These images require 128 image colors.  To get this, you 
# must start ntl with 128 satellite colors.  This is the
# default in NAWIPS 5.4.
#
colormapdir     : $(GARPHOME)/map/areas
colormapkeys    : 
"topo_goes8.area,topo_goes9.area,topo_na.area,topo_nh.area,topo_sh.area,topo_wh.area,topo_norcal.area,topo_VA.area,topo_CO.area,topo_centralRockies.area,topo_MN.area,topo_midwest.area,topo_southwestUS.area"
colormaplabels  : "GOES-8,GOES-9,North America,Northern Hemisphere,Southern 
Hemisphere,Hemisphere,Northern California,Virginia,Colorado,Central 
Rockies,Minnesota,Midwest,Southwest"
#
#-------------------------------------------------------------
# Geographic areas
#
# You can now configure the regions, projections, and GAREAs of all the
# regions available under the AREA pull-down menu.  Here are some starting
# examples.  You may configure them.
#
MapLabels       : "DEFAULT,Northern Hemisphere,North 
America,CONUS,Northeast,Southeast,North Central,South 
Central,Northwest,Southwest,Canada,Alaska,Hawaii,Pacific,Asia,Australia,South 
America,Africa,Europe,South Pole,North Pole"

MapProjection   : 
"DEFAULT,str/90;-120;10,str/90.0;-100;0.0,lcc/30.0;-100;50.0,lcc/30.0;-80;50.0,lcc/30.0;-85;50.0,lcc/30.0;-100;50.0,lcc/30.0;-100;50.0,lcc/30.0;-110;50.0,lcc/30.0;-110;50.0,STR/90.00;-98.00;0.00,STR/90.00;-170.00;0.00,CED,lea/25;-155;0,str/60;90;0,str/-60;135;0,str/-60;-50;0,lea/-25;15;5,str/60;30;0,str/-90;0;0,str/90;-90;0"

MapGarea        : 
"DEFAULT,-10;-170;-10;10,10;-130;50;-30,23.0;-120.0;47.0;-65.0,35;-90;48;-65,24.00;-95.00;38.00;-73.00,36.00;-112.00;50.00;-86.00,25.00;-110.00;40.00;-85.00,37.00;-125.00;50.00;-105.00,25.00;-122.00;40.00;-95.00,#48.00;-72.00;12.00;61.00,50.00;-180.00;60.00;-110.00,#20.50;-157.00;2.50;3.00,#25;-155;40;55,0;60;60;170,-45;90;0;170,-45;-100;15;-25,-30;-10;40;55,30;5;70;60,20;-135;20;45,-20;-135;-20;45"
#
# 
# Default map areas and projections for each model type.  Use the 
# string defined in "modelkeys" to specify the model.  If no spec
# exists for a given model, default_proj and default_garea are used.
#
avn_proj        : str/90.0;-100;0.0
avn_garea       : 10;-130;50;-30
thin_proj       : str/90;-100;0
thin_garea      : AFNA
avn003_proj     : str/90;-100;0
avn003_garea    : AFNA
ukmet_proj      : str/90;-100;0
ukmet_garea     : AFNA
ecmf1_proj      : str/90;-100;0
ecmf1_garea     : AFNA
gdas_proj       : str/90;-100;0
gdas_garea      : AFNA
ngm211_proj     : lcc/25;-95;25
ngm211_garea    : AWIPS
ruc211_proj     : lcc/25;-95;25
ruc211_garea    : AWIPS
ruc236_proj     : lcc/25;-95;25
ruc236_garea    : AWIPS
maps_proj       : lcc/25;-95;25
maps_garea      : AWIPS
eta_proj     : lcc/25;-95;25
eta_garea    : AWIPS
eta212_proj     : lcc/25;-95;25
eta212_garea    : AWIPS
#eta.gem_proj    : lcc/30.0;-100;50.0
#eta.gem_garea   : 23.0;-120.0;47.0;-65.0
#e10_proj       : mer/27;-126;45;-106
#e10_garea      : 27;-126;45;-106
#ngm_proj        : lcc/30.0;-100;50.0
#ngm_garea       : 23.0;-120.0;47.0;-65.0
mrf003_proj        : str/90;-120;10
mrf003_garea       : -10;-170;-10;10
mrf002_proj        : str/90;-120;10
mrf002_garea       : -10;-170;-10;10
mrf_proj        : str/90;-120;10
mrf_garea       : -10;-170;-10;10
ruc.gem_proj    : lcc/30.0;-100;50.0
ruc.gem_garea   : 23.0;-120.0;47.0;-65.0
rsas_proj       : lcc/30.0;-100;50.0
rsas_garea      : 23.0;-120.0;47.0;-65.0
ens_proj   : str/90;-120;10
ens_garea  : -10;-170;-10;10
default_proj    : lcc/25.0;-103;25.0
default_garea   : 20.0;-127.0;50.0;-59.0
#
#-------------------------------------------------------------
# FDF & Macro chapters. 
#
# These chapters are subdirectories which discriminate between
# families of FDFs and macros. For each list of chapters, you 
# must also define a list of button labels.
#
# Scalar, Vector, XSScalar (scalar cross section), XSVector
# (vector cross section), THScalar (time/height scalar), THVector 
# (time/height vector), VPScalar (vertical profile scalar),
# VPVector (vertical profile vector).
#
ScalarChapter   : 
general,convective,HAS,isentropic,maxT_est,macros,macros_850mb,macros_700mb,macros_500mb,macros_250mb
SCLabels        : 
General,Convective,HAS,Isentropic,MaxT_est,Macros,850mb_Macros,700mb_Macros,500mb_Macros,250mb_Macros
VectorChapter   : general
VCLabels        : General
XSScalarChapter : general,macros
XSSCLabels      : General,Macros
XSVectorChapter : general
XSVCLabels      : General
THScalarChapter : general,macros
THSCLabels      : General,Macros
THVectorChapter : general
THVCLabels      : General
VPScalarChapter : general,macros
VPSCLabels      : General,Macros
VPVectorChapter : general
VPVCLabels      : General
#
#-------------------------------------------------------------
# Model dialog line parameters.
#
linetypekeys    : "1,2,3,4,5,6,7,8,9,10"
linetype        : "Solid,Short dashed,Medium dashed,Long & short dash,Long 
dash,Long dash 3 short,Long dash dot,Long dash 3 dots,Medium dash dot,Dotted"
labelfreqkeys   : "0,1,2,3,4,5"
labelfreq       : "No labels,Every line,Every 2nd line,Every 3rd line,Every 4th 
line,Every 5th line"
#
#-------------------------------------------------------------
# Model dialog vector symbols. These symbols will appear as options
# when the "More" button is pressed for model dialogs.
#
vectorkeys      : "bm,bk,am,ak,an,st"
vectorsymbols   : "Barb (m/s),Barb (knots),Arrow (m/s),Arrow (knots),Arrow 
(other),Streamlines"
VertVectorkeys  : "bm,bk,am,ak,an"
VertVectorsymbols : "Barb (m/s),Barb (knots),Arrow (m/s),Arrow (knots),Arrow 
(other)"
#
#-------------------------------------------------------------
# Cross section vertical axis scale. Do not add additional axes.
#
yaxiskeys       : "log,lin"
yaxislabels     : "Logarithmic,Linear"
#
#-------------------------------------------------------------
# Vertical profile vertical axis scale. Do not add additional axes.
#
vpyaxiskeys     : "log,lin,skewt,stuve"
vpyaxislabels   : "Logarithmic,Linear,Skew-T,Stuve"
#
#-------------------------------------------------------------
# Time/height time axis scale. Do not change.
#
thtaxiskeys     : "R,F"
thtaxislabels   : "Increasing to left,Increasing to right"
#
#-------------------------------------------------------------
# Wind Profiler keys.
#
wpbottom        : 0
wptop           : 10000
wpincrement     : 1000
wpduration      : 24
wptimeint       : 60
wpendtime       : 
#
#-------------------------------------------------------------
# End of dynamically generated menus.
#

#--------------------------------------------------------------
# Additional configurataions:
#
#--------------------------------------------------------------
#
# Thermodynamic diagram settings.
#
# stndex - defines a list of stability indices and thermodynamic
#          parameters which are displayed on a thermodynamic diagram
#          (Skew-T or Stuve). See the GEMPAK variable STNDEX for a list
#          of valid  parameters and syntax.  Valid for upper air data
#          vertical profiles only.
#
# SkewtXAxis, StuveXAxis
#        - defines the GEMPAK "xaxis" parameter used when plotting
#          SkewT-logP and Stuve diagrams, respectively.  See the
#          GEMPAK variable XAXIS for syntax.  Valid for upper air
#          data and model data vertical profiles.
#
stndex          : selv;lift;kinx;totl;swet;lclp;lfcv;eqlv;cape;cins;brch
SkewtXAxis      : ///;1
StuveXAxis      : -100/30/20/1

#
# Widget defaults
#
# Choose default values for the model, vertical coordinate, levels,
# function, default fdf chapters, cross-section line, time-height
# station, vertical profile axis types, radar ring station, upper
# air levels and upper air filter.
#
model           : eta
vcoord          : pres
level1          : 500
level2          : 1000
fdf             : "Temp_C"
fdf_directory   : general
xsfdf           : "Theta_K"
xsfdf_directory : general
thfdf           : "Theta_K"
thfdf_directory : general
vpfdf           : "Temp_C"
vpfdf_directory : general
cross-section   : vbg>dnr
time-height_stn : DNR
yaxistype       : log
vpyaxistype     : skewt
rring_stid      : FTG
upalevels       : 
Surface,1000,925,850,700,500,400,300,250,200,150,100,70,50,30,20,10,Top
upa_filter      : 0.5

#
# Auto Update. 
#
# Set to yes or no. The units of update_timer is minutes.
# Valid entries are 1 to 60.
#
autoupdate      : no
update_timer    : 5

#
# List of times in date/time scrolled lists for model data. 
#
# Generally, this is "all" to present all model times.  An alternative
# is "analysis" to show only model analysis times.
#
TimesInList     : all

#
# Time match type. 
# 
# Valid values are "strict" (meaning that a time interval will is applied
# to the time match), "closest" (to match the closest time),  and "none" 
# (for no time matching). Time matching applies only to plan view  data.
#
TimeMatch       : none

#
# Time match intervals for "strict" time matching.
#
# Intervals in seconds. If the data to be time matched lies within the 
# time interval given below, a valid time match will be found.
#
SfcObsTimeInterval:     3600
UpaObsTimeInterval:     43200
RadarTimeInterval:      900
SatelliteTimeInterval:  3600

#
# Hypertext browser command and Starting URLs (or files).
#
# If the Browser command is "netscape %s", and Netscape is already running,
# then GARP will try to open the URL in a new Netscape window. Otherwise,
# GARP will launch the browser command listed. (The %s is the URL placeholder.)
# 
GarpHTML        : $(GARPHOME)/html
Browser         : "netscape -install %s"
UserGuide       : $(GarpHTML)/UserGuide.html
CaseStudies: http://www.comet.ucar.edu/resources/cases/

#
# Dwell settings for animations
#
# You can customize the dwell settings for animations. The default
# dwell is used when you start GARP, and there are 5 pre-defined
# dwell groups available. Dwell settings are composed of three values;
# the first frame, intermediate and final frame pause. Values are in
# seconds. The speeds should get faster as you go from preset
# dwell 1 to 5. Also, you may change the min and max allowed
# values for the dwell settings on the slider bars. The internal
# defaults are 0 and 3 seconds.
#
defaultdwell : "0.60,0.10,0.60"
presetdwell1 : "2.50,1.50,2.00"
presetdwell2 : "1.20,0.66,0.90"
presetdwell3 : "0.90,0.33,0.60"
presetdwell4 : "0.60,0.10,0.50"
presetdwell5 : "0.20,0.05,0.20"
dwellmin     : "0.01"
dwellmax     : "3.00"

#
# Status bar and units
#
# This is the information that will be displayed on the status bar
# by default. Allowable items are:
#
#       clock           ticking clock
#       windowcoords    X,Y coordinate of mouse pointer
#       plotcoords      mouse pointer position in plotting coordinates
#       pixelvalue      image pixel value
#       distcalc        distance and range calculator
#
statusbaritems : "clock,windowcoords,plotcoords,pixelvalue,distcalc"

#
# Define the units for image brightness temperature and distances.
# Internal defaults are "degrees C" for temperature and "km" for 
# distance. Allowable values are:
#
# temperature: C, K or F  (Celcius, Kelvin, Fahrenheit)
# distance:    KM, MI, or NM (Kilometers, Miles, Nautical miles)
#
tempunits :     C
distunits :     KM

#
# Lat/Lon Grid defaults.
#
# Define default lat/lon lines, increment, labelling, color, line
# type and line width.  (See "latlon" in Chapter 3 of the NAWIPS
# Users Guide for help.)
#
latlon:         no      # lat/lon grid, yes or no 
latinc:         5.0     # latitude increment (degrees)
loninc:         5.0     # longitude increment (degrees)
label_freq:     2       # label frequency
gridlinecolor:  2       # line color (GEMPAK color number)
gridlinetype:   10      # line type (GEMPAK line types)
gridlinewidth:  1       # line width

#
#-----------------------------------------------------------------------
# Static configurations
#
# You should not have to change anything else in this file, unless
# you have a very good reason.

#
# Minimum size of zoom box (in pixels) before zooming occcurs.
# To prevent zooming by mistake.  Leave as is.
#
# Zoom box color. GEMPAK color number used when drawing the zoom box. 
# The zoom box will NOT necessarliy appear in this color, especially
# over images, since the color actually drawn is a combination of color
# indices. Leave alone unless the zoom box does not appear (is black)
# on some plots. (Color 1 is off-white)
#
minzoomboxsize  : 20
zoomboxcolor    : 1

#
# GARP icon directory (do not change)
#
ICONDIR         : $(GARPHOME)/icons

#
#  Tables used for overlaying the location of certain station types
#  i.e. surface, sounding, profiler, NEXRAD sites, etc.
#  (Do not change)
#
tabledir        : $(GARPHOME)/tables

# 
#  Color enhancement tables
#  Found in tabledir
#  (Do not change)
#
mastertbl       : master_garp.tbl
satenhancetbl   : sat_enhance.tbl
radenhancetbl   : rad_enhance.tbl

#
#  Map list table file (don't change)
#
maplisttbl      : maplist.tbl

#  Location of FDF (Field Description File) files
#  (Do not change, unless you have a different FDF directory)
#
fdfdir          : $(GARPHOME)/fdf              # FDF Directory
valid_fdf_keys  : $(fdfdir)/valid_fdf_keys     # Valid keys file
scalarfdf       : $(fdfdir)/scalar             # Plan view scalar FDFs
vectorfdf       : $(fdfdir)/vector             # Plan view vector FDFs
xsscalarfdf     : $(fdfdir)/xsscalar           # Cross section scalar FDFs
xsvectorfdf     : $(fdfdir)/xsvector           # Cross section vector FDFs
thscalarfdf     : $(fdfdir)/xtscalar           # Time/height scalar FDFs
thvectorfdf     : $(fdfdir)/xtvector           # Time/height vector FDFs
vpscalarfdf     : $(fdfdir)/vpscalar           # Vertical profile scalar FDFs
vpvectorfdf     : $(fdfdir)/vpvector           # Vertical profile vector FDFs

#  File name template strings.
#
#  Each component of the template strings must match up one for one
#  with the data directories defined above
#
#  Don't worry about matching up the "model" or "type" strings
#
#  Unless you've changed the Data Directory structures above,
#  you shouldn't have to change these lines.
# Use the following for YYMMDD convention
#nidsT  : $(nids)/%(site)/%(product)/*_@(YYMMDD)_@(HHNN)
#nowradT: $(nowrad)/%(resolution)/%(product)/*_@(YYMMDD)_@(HHNN)
#gridsT    : $(grids)/@(YYMMDDHH)_*.gem
#surfaceT  : $(surface)/@(YYMMDD)_sao.gem
#upperairT : $(upperair)/@(YYMMDD)_upa.gem
#profilerT : $(profiler)/@(YYMMDDHH)_6min.gem
#satT   : $(SATDIR)/%(platform)/%(resolution)/%(product)/*_@(YYMMDD)_@(HHNN)
#
nidsT  : $(nids)/%(site)/%(product)/*_@(YYYYMMDD)_@(HHNN)
#nowradT: $(nowrad)/%(resolution)/%(product)/*_@(YYYYMMDD)_@(HHNN)
nowradT: $(RADDIR)/%(platform)/%(resolution)/%(product)/*_@(YYYYMMDD)_@(HHNN)
satT   : $(SATDIR)/%(platform)/%(resolution)/%(product)/*_@(YYYYMMDD)_@(HHNN)
gridsT    : $(grids)/@(YYYYMMDDHH)_*.gem
surfaceT  : $(surface)/@(YYYYMMDD)_sao.gem
upperairT : $(upperair)/@(YYYYMMDD)_upa.gem
profilerT : $(profiler)/@(YYYYMMDD)_6min.gem

#------------------------------------------------------------------------