[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20041011: GARP vertical model profiles unable to change parameter?



Pete,

Yes, tmpc/dwpc are the only parameters that make since
to plot on the skew-t/stuve diagrams. As from the "phelp gdprof"
output:

     The vertical coordinate, set in GVCORD, can be PRES, THTA, or
     HGHT.  The vertical axis type, set in PTYPE, can be LIN,
     LOG, KAP, or SKEW.  Only temperatures vs. pressure may be
     plotted on a skew t plot.  The height-to-width ratio of the
     plot may be specified in PTYPE following a /.  If no value is
     entered, a value of 0 will be used.

Steve Chiswell


>From: address@hidden (Pete Pokrandt)
>Organization: UCAR/Unidata
>Keywords: 200410111806.i9BI6qUE017994

>
>I just found out the problem only exists for Skewt/Stuve plots,
>guess that is the default behavior on those.. Logarithmic/Linear
>work fine.
>
>Sorry..
>
>PEte
>
>--
>+>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>+<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<+
>^ Pete Pokrandt                    V 1447  AOSS Bldg  1225 W Dayton St^
>^ Systems Programmer               V Madison,         WI     53706    ^
>^                                  V      address@hidden       ^
>^ Dept of Atmos & Oceanic Sciences V (608) 262-3086 (Phone/voicemail) ^
>^ University of Wisconsin-Madison  V       262-0166 (Fax)             ^
>+<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<+>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>+
>
>From address@hidden  Mon Oct 11 11:48:49 2004
>Return-Path: <address@hidden>
>Received: from sysadm.aos.wisc.edu (sysadm.aos.wisc.edu [144.92.131.142])
>       by unidata.ucar.edu (UCAR/Unidata) with ESMTP id i9BHmnUE015684
>       for <address@hidden>; Mon, 11 Oct 2004 11:48:49 -0600 
> (MDT)
>Organization: UCAR/Unidata
>Keywords: 200410111748.i9BHmnUE015684
>Received: from sysadm.aos.wisc.edu (localhost.localdomain [127.0.0.1])
>       by sysadm.aos.wisc.edu (8.12.11/8.12.11) with ESMTP id i9BHmavM001759
>       for <address@hidden>; Mon, 11 Oct 2004 12:48:36 -0500
>Received: from sysadm (poker@localhost)
>       by sysadm.aos.wisc.edu (8.12.11/8.12.11/Submit) with ESMTP id i9BHmZlY0
> 01754
>       for <address@hidden>; Mon, 11 Oct 2004 12:48:36 -0500
>Message-Id: <address@hidden>
>X-Mailer: exmh version 2.5 01/15/2001 with nmh-1.0.4
>To: address@hidden
>From: address@hidden (Pete Pokrandt)
>Reply-to: address@hidden
>Subject: GARP vertical model profiles unable to change parameter?
>Mime-Version: 1.0
>Content-Type: text/plain; charset=us-ascii
>Date: Mon, 11 Oct 2004 12:48:35 -0500
>Sender: address@hidden
>X-sysadm-MailScanner-Information: Please contact the ISP for more information
>X-sysadm-MailScanner: Found to be clean
>X-sysadm-MailScanner-SpamCheck: not spam, SpamAssassin (score=-4.9,
>       required 5, autolearn=not spam, BAYES_00 -4.90)
>X-MailScanner-From: address@hidden
>X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on 
>       laraine.unidata.ucar.edu
>X-Spam-Level: 
>X-Spam-Status: No, hits=-3.9 required=5.0 tests=AWL,BAYES_00 autolearn=ham 
>       version=2.63
>
>
>All,
>
>Running gempak 5.7.2p2, garp v2.1,  we are unable to change the
>parameter to be plotted from the defaults, i.e. probably tmpc/dwpc
>
>The list of parameters that could be chosen and the box in which
>to enter a paremeter are all greyed out, no matter which model
>is chosen.
>
>Vertical cross sections, time-hight cross sections and plan projection
>plots all are working ok.
>
>Any ideas?
>
>Thanks,
>
>Pete
>
>--
>+>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>+<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<+
>^ Pete Pokrandt                    V 1447  AOSS Bldg  1225 W Dayton St^
>^ Systems Programmer               V Madison,         WI     53706    ^
>^                                  V      address@hidden       ^
>^ Dept of Atmos & Oceanic Sciences V (608) 262-3086 (Phone/voicemail) ^
>^ University of Wisconsin-Madison  V       262-0166 (Fax)             ^
>+<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<+>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>+
>
--
NOTE: All email exchanges with Unidata User Support are recorded in the
Unidata inquiry tracking system and then made publicly available
through the web.  If you do not want to have your interactions made
available in this way, you must let us know in each email you send to us.