[
Date Prev][
Date Next][
Thread Prev][
Thread Next][
Date Index][
Thread Index]
Re: 20040928: Problems with sfmod : station not added
- Subject: Re: 20040928: Problems with sfmod : station not added
- Date: Tue, 28 Sep 2004 20:46:25 -0400
Hi Steve,
Thanks, that did the trick. However, let me just mention that STNM,
when it begins with a 0, I must specify @76300 instead of @07630 (I
must use the long 6-digit form, which is 5 digits because of the
leading 0).
Thanks,
Christian
UQAM
On 28 Sep 2004 12:38:28 -0600, Steve Chiswell <address@hidden> wrote:
> Christian,
>
> Use blank characters for your STID (icao) instead of 9999
> as you have done for stations that do not have an icao identifier.
> Otherwise, you will be confusing the station id as the same 9999
> STID for multiple stations, and therefore likely not finding the
> one that matches your garea=@STNM. Also, your STNM will be the 5 digit
> WMO for a synoptic bulletin.
>
> Steve Chiswell
> Unidata User Support
>
> On Tue, 2004-09-28 at 07:48, Christian Pagé wrote:
> > Hi everyone,
> >
> > I have problems with SFMOD. Here is the situation:
> > 1- I create a file with SFCFIL with stations I want using a station table.
> > 2- I merge SYNOP data using SFMOD into the new GEMPAK file.
> > 3- While I can list a particular station with SFLIST in the original
> > SYNOP file, it is not merged in the new file with SFMOD, even though
> > there is plenty of room for additional stations, and the station is in
> > the table list. The only thing is that there is no ICAO for that
> > station, only the WMO ID.
> >
> > Here is the output of the commands and some embedded comments:
> > 130 io [/io/httpd/meteoalerte_fr/sc/aa] % sfcfil
> > SFOUTF Output surface file aa.gem
> > SFPRMF Surface parameter packing file meteoalerte.pack
> > STNFIL Station information file
> > /io/httpd/meteoalerte_fr/sc/france_metar.txt
> > SHIPFL Ship data file flag n
> > TIMSTN Times/additional stations 70/9999
> > SFFSRC Surface file source
> > Parameters requested: SFOUTF,SFPRMF,STNFIL,SHIPFL,TIMSTN,SFFSRC.
> > GEMPAK-SFCFIL>r
> >
> > SFCFIL PARAMETERS:
> >
> > New surface file: aa.gem
> > Parameter file: meteoalerte.pack
> > Station file:
> > Number of stations in STNFIL: 222
> > Number of additional stations: 9999
> > Total number of stations: 10221
> > Total number of times: 70
> >
> > This file will be a standard surface file.
> >
> > Enter <cr> to accept parameters or type EXIT:
> > The file has been created.
> > Parameters requested: SFOUTF,SFPRMF,STNFIL,SHIPFL,TIMSTN,SFFSRC.
> > GEMPAK-SFCFIL>e
> >
> > % wc -l /io/httpd/meteoalerte_fr/sc/france_metar.txt
> > 222 /io/httpd/meteoalerte_fr/sc/france_metar.txt
> >
> > % sfmod
> > SFFILE Surface data file
> > /io/ldm/data/gempak/surface/syn/20040928_syn.gem
> > SFOUTF Output surface file aa.gem
> > DATTIM Date/time all
> > DATOUT Output date/time
> > AREA Data area @74870
> > SFPARM Surface parameter list tmpc
> > Parameters requested: SFFILE,SFOUTF,DATTIM,DATOUT,AREA,SFPARM.
> > GEMPAK-SFMOD>r
> >
> > SFMOD PARAMETERS:
> >
> > Input file: /io/ldm/data/gempak/surface/syn/20040928_syn.gem
> > Output file: aa.gem
> > Area: @74870
> > Output parameters: tmpc
> > Input date/time: Output date/time:
> > 040928/0000 040928/0000
> > 040928/0100 040928/0100
> > 040928/0200 040928/0200
> > 040928/0300 040928/0300
> > 040928/0400 040928/0400
> > 040928/0500 040928/0500
> > 040928/0600 040928/0600
> > 040928/0700 040928/0700
> > 040928/0800 040928/0800
> > 040928/0900 040928/0900
> > 040928/1000 040928/1000
> > 040928/1100 040928/1100
> > 040928/1200 040928/1200
> > 040928/1300 040928/1300
> > Enter <cr> to accept parameters or type EXIT:
> > Parameters requested: SFFILE,SFOUTF,DATTIM,DATOUT,AREA,SFPARM.
> > GEMPAK-SFMOD>e
> >
> > % sflist
> > SFFILE Surface data file
> > /io/ldm/data/gempak/surface/syn/20040928_syn.gem
> > AREA Data area @74870
> > DATTIM Date/time all
> > SFPARM Surface parameter list tmpc
> > OUTPUT Output device/filename t
> > IDNTYP STNM or STID STID
> > Parameters requested: SFFILE,AREA,DATTIM,SFPARM,OUTPUT,IDNTYP.
> > GEMPAK-SFLIST>sffile=aa.gem
> > GEMPAK-SFLIST>area=dset
> > GEMPAK-SFLIST>r
> > PARM = TMPC
> >
> > STN YYMMDD/HHMM TMPC
> >
> >
> > [SFLIST -3] No stations reporting data.
> > Parameters requested: SFFILE,AREA,DATTIM,SFPARM,OUTPUT,IDNTYP.
> > GEMPAK-SFLIST>e
> >
> > Station is in the station list:
> > 9999 074870 GRENOBLE/LE VERSOUD -- FR 4522 585 220
> >
> > Even if the area is FR or includes the latitude and longitude, this
> > station is still not included.
> > And I can list it in the original file:
> > % sflist
> > SFFILE Surface data file
> > /io/ldm/data/gempak/surface/syn/20040928_syn.gem
> > AREA Data area @74870
> > DATTIM Date/time all
> > SFPARM Surface parameter list tmpc
> > OUTPUT Output device/filename t
> > IDNTYP STNM or STID STID
> > Parameters requested: SFFILE,AREA,DATTIM,SFPARM,OUTPUT,IDNTYP.
> > GEMPAK-SFLIST>r
> > PARM = TMPC
> >
> > STN YYMMDD/HHMM TMPC
> > 9999 040928/0100 9.20
> > 9999 040928/0200 8.80
> > 9999 040928/0400 7.80
> > 9999 040928/0500 8.10
> > 9999 040928/0700 9.20
> > 9999 040928/0800 12.70
> > 9999 040928/1000 16.80
> > 9999 040928/1100 18.70
> > 9999 040928/1300 20.20
> >
> >
> > Parameters requested: SFFILE,AREA,DATTIM,SFPARM,OUTPUT,IDNTYP.
> > GEMPAK-SFLIST>e
> >
> > Why?
>
--
Christian Pagé
http://meteocentre.com/ http://meteoalerte.com/
Etudiant au Doctorat en Sciences de l'environnement UQAM
