[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20030905: 20030904: GDDIAG Error

Patrick,

The internal grid space for your calculation (LLMDGG) must be large enough
to accomodate 1121x881xN grid points, where N is the number of parameters
involved in the calculation (eg, here it is 3 for C = MUL (a,b)). This would be
2,962,803 for your grids. If you change LLMXGD, then you must also set LLMDGG 
accordingly
for your computations. The default of 2,500,000 must be increased to at least
3,000,000.

Steve Chiswell





>From: "Patrick O'Reilly" <address@hidden>
>Organization: UCAR/Unidata
>Keywords: 200309051932.h85JWPLd024016

>Here's the info on the file I am sending (assuming it makes it).
>
> GEMPAK-GDINFO>r
>
> GRID FILE: test.gem
>
> GRID NAVIGATION:
>     PROJECTION:          STR
>     ANGLES:                90.0   255.0     0.0
>     GRID SIZE:         1121 881
>     LL CORNER:              23.12   -119.02
>     UR CORNER:              45.62    -59.95
>
> GRID ANALYSIS BLOCK:
>     ANALYSIS TYPE:        BARNES
>     DELTAN:               4.000
>     DELTAX:           -9999.000
>     DELTAY:           -9999.000
>     GRID AREA:            19.00 -135.00   59.00  -59.00
>     EXTEND AREA:          19.00 -135.00   59.00  -59.00
>     DATA AREA:            19.00 -135.00   59.00  -59.00
>
> Number of grids in file:     2
>
> Maximum number of grids in file:    200
>
>  NUM       TIME1              TIME2           LEVL1 LEVL2  VCORD PARM
>    1     030731/1200F024   030830/1200F024        0         NONE AVEP24M
>    2     030731/1200F024   030830/1200F024        0         NONE CNTP24M
> Parameters requested: GDFILE,LSTALL,OUTPUT,GDATTIM,GLEVEL,GVCORD,GFUNC.
> GEMPAK-GDINFO>
>
>
>I am running GEMPAK version 5.6.h on Solaris 8.  Take note of the grid size,
>I had to re-build GEMPAK to run on larger grids than was the default.  I am
>getting these precip grids from
>ftp://ftpprd.ncep.noaa.gov/pub/gcp/precip/stage2/20030905/ and the file name
>is ST2un2003090512.24h.Z.  Thanks!
>
>
>Patrick
>
>----- Original Message ----- 
>From: "Unidata Support" <address@hidden>
>To: "Patrick O'Reilly" <address@hidden>
>Cc: <address@hidden>
>Sent: Friday, September 05, 2003 2:04 PM
>Subject: 20030904: GDDIAG Error
>
>
>>
>> Patrick,
>>
>> I ran a test on some grids that I had and it seems to work for
>> me like:
>>
>>  GDFILE   = test1.gem
>>  GDOUTF   = test1.gem
>>  GFUNC    = mul(avep24m,cntp24m)
>>  GDATTIM  = 030905/0000F024:030905/0600F024
>>  GLEVEL   = 0
>>  GVCORD   = none
>>  GRDNAM   = augp
>>  GPACK    =
>>  GEMPAK-GDDIAG>r
>>
>>
>>     TIME1             TIME2         LEVL1 LEVL2   VCORD PARM
>> 030905/0000F024    030905/0600F024      0          NONE AUGP
>> Enter a new grid parameter name, <cr> to accept or type EXIT:
>>  Parameters requested: GDFILE,GDOUTF,GFUNC,GDATTIM,GLEVEL,GVCORD,GRDNAM,
>>  GPACK.
>>  GEMPAK-GDDIAG>
>>
>> If you want to GDMOD the 2 grids in question to a file
>> and just send me that, I can check your grids here.
>>
>> Also let me know the OS and version you are using.
>>
>> It almost sounds like one of your grids is empty or corrupt. Have you
>> verified that you didn't hit the max number of grids in your file
>> along the way, etc? Of couse, if you can see them independently
>> with gdlist etc, then that isn't the problem.
>>
>> Steve Chiswell
>>
>>
>>
>>
>>
>> >From: "Patrick O'Reilly" <address@hidden>
>> >Organization: UCAR/Unidata
>> >Keywords: 200309042022.h84KMbLd029630
>>
>> >Okay, what I'm trying to do is take a grid file with a months worth of
>daily
>> >24-hour radar estimated precip grids (P24M), and add them to get a
>monthly
>> >total radar estimated precip grid.
>> >
>> >So, I made a grid file using GDCFIL.  That was good.  Then I used GDSTAT
>to
>> >calculate the AVE, SDV, and CNT of the grids.  That went great.  Next, I
>> >tried using GDDIAG to multiply the AVEP24M and CNTP24M fields to get a
>grid
>> >with the total precip.  Not so good.  What I do get is:
>> >
>> > GEMPAK-GDDIAG>l
>> > GDFILE   = aug_precip.gem
>> > GDOUTF   = aug_precip.gem
>> > GFUNC    = MUL[AVEP24M,CNTP24M]
>> > GDATTIM  = 030731/1200f024:030830/1200f024
>> > GLEVEL   = 0
>> > GVCORD   = none
>> > GRDNAM   = augp
>> > GPACK    =
>> > GEMPAK-GDDIAG>r
>> > [DG -10]  Internal grid list is full; simplify function.
>> > [DG -10]  Internal grid list is full; simplify function.
>> > Parameters requested: GDFILE,GDOUTF,GFUNC,GDATTIM,GLEVEL,GVCORD,GRDNAM,
>> > GPACK.
>> > GEMPAK-GDDIAG>
>> >
>> >Couldn't find much info on the support archive list about this error,
>only
>> >that the GFUNC may be too long, but in this case it isn't.  Any pointers?
>> >
>> >Patrick
>> >_______________________________________
>> >Patrick O'Reilly
>> >Meteorological Decision Support Scientist
>> >The STORM Project - University of Northern Iowa
>> >address@hidden  ~  ph: 319-273-3789
>> >http://www.uni.edu/storm
>> >
>> >"No trees were killed in the making of this e-mail...however,
>> >a large number of electrons were horribly inconvenienced."
>> >
>>
>>
>****************************************************************************
><
>> Unidata User Support                                    UCAR Unidata
>> (303)497-8643                                                  P.O. Box
>> address@hidden                                   Boulder, CO
>> --------------------------------------------------------------------------
>> Unidata WWW Service
>>
>****************************************************************************
><
>