[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20020424: 20020424: Gempak installation!

dongyu,

The binary installation does not contain the $GEMLIB directory since
you do not need that to run the programs. The binary installation
only includes the directories necessary to run GEMPAK.

If you want to link your own programs against the GEMPAK libraries, then
you can download them as a separate tar file from the Web portal.

You should set your LD_LIBRARY_PATH environmental variable to
the location of our F77 shareable libraries on your system.
If you do not have the appropriate Fortran shareable libraries
already, then you can download them as well from the Web portal site
and place them in a location on your system and add that to your
LD_LIBRARY_PATH. All of this is included in the README file for
the binary installations.


See the Solaris binary installation instructions under:
http://my.unidata.ucar.edu/modules.php?name=Downloads&d_op=viewsdownload&sid=5

The following links are provided:
README file for GEMPAK binary installation (SOLARIS SPARC)
GEMPAK program libraries, V5.6.F, Solaris Sparc 
System shared libraries for Solaris Sparc 

Steve Chiswell
Unidata User SUpport

>From: <address@hidden>
>Organization: UCAR/Unidata
>Keywords: 200204242119.g3OLJka14932

>Hi:
> I have settled  the (1)(2) problem by creating the lib directory by 
>myself and download the system library from your ftp site.  
> Then how about the third question?
>
>dongyu
>
>----- Original Message -----
>From: Steve Chiswell <address@hidden>
>Date: Wednesday, April 24, 2002 4:05 pm
>Subject: 20020424: Gempak installation! 
>
>> 
>> Dongyu,
>> 
>> If you downloaded a binary distribution of GEMPAK, then there are
>> no Makefiles because the distribution is already built. All
>> you have to do is edit the Gemenviron file. For more instructions, see
>> the README files for the appropriate binary installation as found
>> on the Unidata web portal site.
>> 
>> If you want to build the GEMPAK distribution locally, download the
>> source code tarfile.
>> 
>> Steve Chiswell
>> Unidata User Support
>> 
>> >
>> > ---------- Forwarded message ----------
>> > Date: Wed, 24 Apr 2002 14:09:30 -0400
>> > From: address@hidden
>> > To: Jeff Weber <address@hidden>
>> > Subject: Gempack installation!
>> >
>> > Hi Jeff:
>> >
>> >  Sorry to bother you again!
>> >
>> > I am installing Gempak on our machine. Now I meet some 
>> problems:When I
>> > run "make all >& make.out &", I can't continue my installation. 
>> I can't
>> > find the makefiles.Where can I find the Unidata makefiles? Could you
>> > tell me? I have followed the procedure in the installation file.
>> >
>> > dongyu Liu
>> > George Mason University
>> >
>> > ----- Original Message -----
>> > From: Jeff Weber <address@hidden>
>> > Date: Monday, April 22, 2002 3:29 pm
>> > Subject: Re: Feed Request
>> >
>> > > Hi Dongyu,
>> > >
>> > > If you are still requesting UNIDATA  ".*"as a feed type you 
>> should be
>> > > getting the HDS/HRS (model) feed.
>> > >
>> > > Here are some examples from our pqact.conf file..:
>> > >
>> > > Keep in mind you need to use tabs and no "carriage returns"..for
>> > > pqact.conf
>> > >
>> > > # Select an#
>> > > # RUC/MAPS model output
>> > > # Grid #211 CONUS   80km: ^[YZ].Q.*/mRUC
>> > > # Currently, only grid #211
>> > > #
>> > > # NGM model output
>> > > # Grid #211 CONUS   80km: ^[YZ].Q.*/mNGM
>> > > # Grid #207 Alaska  95km: ^[YZ].N.*/mNGM
>> > > # Grid #202 CONUS  190km: ^[YZ].I.*/mNGM
>> > > # Grid #213 CONUS 47.5km: ^[YZ].H.*/mNGM
>> > > # Select an
>> > > HRS     ^[YZ].(.)... KWB. ([0-3][0-9])([0-2][0-
>> 9]).*/m(ETA|NGM|RUC)> >        FILE
>> > >        data/pub/raw/hrs/model/\1/(\2:yyyy)(\2:mm)\2\3_\4.wmo
>> > >
>> > > # NOAAport MRF grids
>> > > # Grid #201 N. Hemisphere 381km: ^Y.A... KWBH
>> > > # Grid #202 CONUS         190km: ^Y.I... KWBH
>> > > # Grid #203 Alaska        190km: ^Y.J... KWBH
>> > > # Grid #204 Hawaii        160km: ^Y.K... KWBH
>> > > # Grid #205 Puerto Rico   190km: ^Y.L... KWBH
>> > > # Select an
>> > > HRS     ^[YZ].(.)... KWBH ([0-3][0-9])([0-2][0-9])
>> > >        FILE
>> > >        data/pub/raw/hrs/model/\1/(\2:yyyy)(\2:mm)\2\3_MRF.wmo
>> > >
>> > > # AVN model output
>> > > # Grid #201 N. Hemisphere 381km: ^Y.A... KWBC.*(/mAVN|/mSSIAVN)
>> > > # Grid #202 CONUS         190km: ^Y.I... KWBC.*(/mAVN|/mSSIAVN)
>> > > # Grid #203 Alaska        190km: ^Y.J... KWBC.*(/mAVN|/mSSIAVN)
>> > > # Grid #211 CONUS          80km: ^Y.Q... KWBC.*(/mAVN|/mSSIAVN)
>> > > # Grid #213 CONUS          95km: ^Y.H... KWBC.*(/mAVN|/mSSIAVN)
>> > > # Select an
>> > > HRS     ^[YZ].([QAIJH])... KWB. ([0-3][0-9])([0-2][0-
>> > > 9]).*(/mAVN|/mSSIAVN)        FILE
>> > >        data/pub/raw/hrs/model/\1/(\2:yyyy)(\2:mm)\2\3_AVN.wmo
>> > >
>> > >
>> > >
>> > > Let me know if I can help further...
>> > >
>> > > Thank you,
>> > >
>> > > -Jeff
>> > > ____________________________                  
>> _____________________> > Jeff Weber                                
>>    address@hidden
>> > > Unidata Support                               PH:303-497-8676
>> > > NWS-COMET Case Study Library                  FX:303-497-8690
>> > > University Corp for Atmospheric Research      3300 Mitchell Ln
>> > > http://www.unidata.ucar.edu/staff/jweber      Boulder,Co 80307-
>> 3000> > ________________________________________      
>> ______________________> >
>> > > On Mon, 22 Apr 2002 address@hidden wrote:
>> > >
>> > > > Hi Jeff:
>> > > >
>> > > >  Thank you very much for your reply! I think I have send too
>> > > many
>> > > > questions to you.
>> > > >
>> > > >  I have already received some data from LDM. Now I want to get
>> > > some Grib
>> > > > (.GRIB) file. I don't care what category of data it is. I only
>> > > want to
>> > > > make that it is GRIB file.
>> > > >
>> > > >  Could you tell me how to config in the pqact.conf? Or Could you
>> > > > recommend somebody I can ask for a advice ?
>> > > >  Thank you again.
>> > > >
>> > > > dongyu
>> >
>> 
>> 
>