[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 20010918: 20010917: YAXIS label on gdcross

Hello,

>Can you verify whether the same behavior exists when you are running
>gdcross (instead of gdcross_gf) with gpend following. And,

        The same behavior is occuring with gdcross with a subsequent
gpend.  I just tested a couple of my scenerios below with the same
results.


>what OS you are running on.

        Linux 2.4.3-SGI_XFS_1.0.1smp #1 SMP Mon Jul 9 14:03:40 CDT 2001 i686
        NAWIPS 5.6.d.1 binary version
>
>I'm assuming this is the global thinned grid AVN data set you are running on?

Yes.  My pqact entry is as follows.

# Process Global AVN thin
HRS     ^H.[I-P]... KWB. ([0-3][0-9])([0-2][0-9]).*
        PIPE    dcgrib2 -d data/gempak/logs/dcgrib.log
                -e GEMTBL=/home/nawips/nawips/gempak/tables
                data/gempak/hds/YYYYMMDDHH_thin.gem


Thanks again! Sorry for the trouble...
        Daryl


>
>Steve Chiswell
>Unidata User SUpport
>
>
>>From: Daryl Herzmann <address@hidden>
>>Organization: UCAR/Unidata
>>Keywords: 200109181843.f8IIhd112465
>
>>Hello Again,
>>      Sorry about being a pester on this, but I still can not get labels
>>to show correctly on the YAXIS using gdcross_gf
>>
>>set device="GF|zonalWind.gif|1000;900"
>>PTYPE = LOG/0/20;6;20;5
>>YAXIS = 1000/100/50/1;2;1
>>TEXT  = .8/2/hw
>>
>>      I get 1000, 950, 900, 850 labeled and ticked and a line accross at
>>900, but nothing else.
>>
>>Then change
>>YAXIS = 1000/100/100/1;2;1
>>
>>      I get nothing on the YAXIS
>>
>>
>>Then change
>>YAXIS = 1000/100/25/1;2;1
>>
>>      I get 1000 to 475 ticked and labeled.  With lines every 50 mb, but
>>nothing else.
>>
>>Then change
>>YAXIS = 1000/100/10/1;2;1
>>
>>      I get labels and ticks from 250 to 750 with lines every 20 mb, but
>>nothing above 250 or below 750.
>>
>>Then change to
>>YAXIS = 1000/100//1;2;1
>>
>>      I get nothing
>>
>>THen try
>>YAXIS = 1000/100/-50/1;2;1
>>
>>      I get label and tick every 50 mb from 100 to 250 and a line at
>>200.  Nothing else.
>>
>>Then try
>>YAXIS = 1000/100/-100/1;2;1
>>
>>      Nothing on Yaxis.
>>
>>      I am not sure what I may be doing wrong.  Thanks for the help.
>>
>>Daryl
>>
>>
>>On Mon, 17 Sep 2001, Unidata Support wrote:
>>
>>>
>>>Daryl,
>>
>>>Your YAXIS value shown below does not follow the syntax expected,
>>>eg: YAXIS = 1000/100 for example. That could cause the program problems.
>>>
>>>Otherwise, the problem is likely that the text font for the label is being
>>>clipped.  You might have to try shrinking the text slightly, or adjusting the
>>>margin of the device.
>>>
>>>Steve Chiswell
>>>Unidata User Support
>>>
>>>>From: Daryl Herzmann <address@hidden>
>>>>Organization: UCAR/Unidata
>>>>Keywords: 200109172228.f8HMSR100223
>>>
>>>>Hi,
>>>>    I am having difficulty getting a YAXIS label to appear on a
>>>>gdcross plot of zonal wind.  I have tried many combinations for YAXIS, but
>>>>can not get any of them to work.
>>>>    Example plot is:
>>>>
>>>>http://www.meteor.iastate.edu/wx/data/current/zonalWind_0.gif
>>>>
>>>>My script is as follows below, it contains my basic YAXIS value.  The plot
>>>>is fine except that students have to guess at the level of the zonal jet
>>>>max.
>>>>
>>>>$GEMEXE/gdcross_gf << EOF >> $LOGFILE
>>>>        DEVICE  = $device
>>>>        GDFILE  = $grid
>>>>        WIND    = bm5
>>>>        SCALE   = 0
>>>>        GVECT   =
>>>>        GDATTIM = f00
>>>>        GFUNC   = XAV(UREL)
>>>>        GVCORD   = PRES
>>>>        YAXIS   = 0:1000
>>>>        CINT    = 5
>>>>        CTYPE   = c
>>>>        CXSTNS  = -89.;30.>89.;30.
>>>>        TITLE   = 31/-2/Zonal Wind (m/s) ~
>>>>        PTYPE   = LOG
>>>>        LINE    = 3/1/1
>>>>        BORDER  = 1/1/3
>>>>        CONTUR  = 1
>>>>        FINT    =
>>>>        FLINE   =
>>>>        TEXT    = 1/22/1/hw
>>>>
>>>>        list
>>>>        run
>>>>
>>>>        exit
>>>>EOF
>>>>
>>>>My data file is created by the pqact action
>>>>
>>>># Process Global AVN thin
>>>>HRS     ^H.[I-P]... KWB. ([0-3][0-9])([0-2][0-9])..
>>>>        PIPE    dcgrib2 -d data/gempak/logs/dcgrib.log
>>>>                -e GEMTBL=/home/nawips/nawips/gempak/tables
>>>>                data/gempak/hds/YYYYMMDDHH_thin.gem
>>>>
>>>>
>>>>Being a Monday, I am probably doing something stupid.
>>>>
>>>>Thanks,
>>>>    Daryl
>>>>
>>>>