[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20011022: WSI to IDD pqact entries

>From:  "Neil R. Smith" <address@hidden>
>Organization:  Texas A&M
>Keywords:  200110222221.f9MML2104153 LDM pqact NNEXRAD WSI

Neil,

>Anyone know where to look to figure out how to convert 
>WSI satellite ldm pqact.conf entries to pqact.conf entries for
>an ldm ingesting nids off of the IDD?

Here is an example of the FILE action we use for all NEXRAD Level III
products in the IDD:

# NEXRAD feedtype,
NEXRAD  ^SDUS5. .... ([0-3][0-9])([0-2][0-9])([0-6][0-9]).*/p(...)(...)
        FILE    -close  
data/pub/raw/nexrad/nids_(\1:yyyy)(\1:mm)\1/\5/\4/\4_(\1:yyyy)(\1:mm)\1_\2\3

The things to note in this action are:

o keying on the '/p' portion of the header
o using the two fields in the '/p' action to get the NEXRAD station ID
  and product type

The first three character group in '/p' is the product name (e.g., N0R,
NVL, NTP, etc.); the second character group in '/p' is the three
character station ID (e.g., FTG, GLD, BIS, etc.).

>At least I presume
>that's what I need because I see that the product naming
>scheme for the NNEXRAD and WSI feed types are different.

The correspondence between the WSI and NOAAPORT product naming schemes
is:

WSI       NOAAPORT  Product
---------+---------+--------------------------------------
BREF1     N0R       Base Reflectivity at Tilt 1
BREF2     N1R       Base Reflectivity at Tilt 2
BREF3     N2R       Base Reflectivity at Tilt 3
BREF4     N3R       Base Reflectivity at Tilt 4

VEL1      N0V       storm radial velocity at tilt 1
VEL2      N1V       storm radial velocity at tilt 2
VEL3      N2V       storm radial velocity at tilt 3
VEL4      N3V       storm radial velocity at tilt 4

TOPS      NET       Echo Tops
VIL       NVL       Vertically Integrated Liquid water

PRE1      N1P       1-hour Precip Totals
PRET      NPT       Storm Total Precipitation

CREF16    NCR       16 level composite reflectivity, 125 nm range

SRMV1     N0S       storm relative radial velocity at tilt 1
SRMV2     N1S       storm relative radial velocity at tilt 2
SRMV3     N2S       storm relative radial velocity at tilt 3

BRLR1     N0Z       248 nm Base Reflectifity

LREF1     N0L       layer reflectivity at tilt 1
LREF2     N1L       layer reflectivity at tilt 2
LREF3     N2L       layer reflectivity at tilt 3

Reference:

http://205.156.54.206/om/ord/iob/NOAAPORT/resources/noaaport_links.shtml#Radar

>I *have* been successful converting GREF, VEL, and SRMV
>using http://205.156.54.206/oso/noaaport.html.
>Thanks, -Neil
>-- 
>Neil R. Smith, Comp. Sys. Mngr.                address@hidden
>Dept. Atmospheric Sci., Texas A&M Univ.        979/845-6272 FAX:979/862-4466

Tom
--
+-----------------------------------------------------------------------------+
* Tom Yoksas                                             UCAR Unidata Program *
* (303) 497-8642 (last resort)                                  P.O. Box 3000 *
* address@hidden                                   Boulder, CO 80307 *
* Unidata WWW Service                             http://www.unidata.ucar.edu/*
+-----------------------------------------------------------------------------+