[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20001108: power information Unidata machine bound for SSEC



>From: Dee Wade <address@hidden>
>Organization: SSEC
>Keywords: 200010241344.e9ODid411410 SSEC machine

------- Forwarded Message

>From: Dee Wade <address@hidden>
>cc: Dee Wade <address@hidden>,
>cc: Jerrold Robaidek <address@hidden>

Tom,

I still need the info about the power etc. What I need to know is the
voltage (120V, 208V, single, 2 or 3 phase, etc) and amps of the raid,
the 450 and the UPS. 
 
My UPS is only at 33% capacity but adding more hardware will reduce how
long it will keep my h/w up so I am not sure I want to add your h/w to
my UPS. THere may be the need to add power to the computer room to
handle the this (usually raids need special power) and if that is the
case, them the issue of who pays for the electricians etc will have to
be addressed.

So please if you can get me the power requirements and also if heat
output is listed, that would be helpful too.  
Thanks

Dee 

Tom Yoksas wrote:
> 
> >From:  Dee Wade <address@hidden>
> >Organization:  UCAR/Unidata
> >Keywords:  200010241344.e9ODid411410 machine
> 
> Dee,
> 
> Sorry to have taken so long to get to your note, but I have been totally
> consumed by preparations for and then presentation of a McIDAS training
> workshop here at the UPC.  I am now digging myself out of the huge list
> of things that need immediate attention...
> 
> >Please remember to send a list of the hardware and specs that you will
> >be sending to SSEC to do the Unidata job. If you don't have the specs I
> >can find them as long as I have the specifics about the machines.
> 
> Here is what my system administrator sent me about the machine (which
> we _still_ have not received from Sun, but are expecting any time now):
> 
>   Here's what we're going to ship up to SSEC...
> 
>   - Sun Enterprise 450 Server (four 480Mhz CPUs, 4GB memory, four 36GB disks)
>    - Sun StorEdge T3W RAIDs (~1.04TB RAID 5)
>    - PGX32 color frame buffer
>    - 17 inch color monitor
>    - PCI FC-AL adapters
>    - Solaris 8 software
>    - Veritas Volume Manager
>    - APC Matrix 5000XR UPS w/Powerchute Plus software (~30 minute uptime)
> 
>    and if these make sense, the following
> 
>    - Rackmount kits
>    - PCI gigabit ethernet
> 
>   All except the UPS is covered by a Sun Silver 7x24 onsite maintenance
>   agreement the first year.
> 
> Conversations between Jerry Robaidek and I bring into question whether
> or not we should ship the UPS with the machine.  Jerry believes that
> the UPSes in your machine room have more than enough power capacity for
> the E450 as outlined above.  If this is the case, it would save the cost
> for bringing in an electrician (if needed) to hook up the power for
> the UPS we have (requires the same kind of power that your UPSes use).
> 
> The E450 itself is rack mountable.  It should require about 9 vertical
> inches in a 19" rack mount.  I believe that the RAID disk farms are
> also rack mountable and take up very little room (compared to the
> two large rack mount disk farms you have in your machine room).
> 
> If the above information is not detailed enough, I will tackle my
> system administrator tomorrow, and we will send you more details.
> The only problem right now is we are all packing our offices in
> preparation for being moved out for 6 weeks while some remodeling is
> done (BIG bummer).
> 
> >Thanks
> 
> Again, sorry it took so long to get the above to you...
> 
> Tom

-- 
Dee Wade
McIDAS User Services and SSEC Data Center 
Space Science and Engineering Center 
University of Wisconsin-Madison           Email:     address@hidden
1225 West Dayton Street                   Voice:     (608) 263-0527
Madison, WI  53706                        Fax:       (608) 263-6738


------- End of Forwarded Message

>From address@hidden Fri Nov 10 08:29:00 2000
>Subject: Re: 20001108: power information Unidata machine bound for SSEC

Thanks Mike. I think this covers everything I need.
Dee

Mike Schmidt wrote:
> 
> Dee,
> 
> Here's what I can find on the equipment;
> 
>   Sun Enterprise 450
>    - AC power                   90-264 VAC, 47-63 Hz
>    - AC service requirement     15A at 110V / 7.5A at 240V (max 1664 watts)
>    - Heat output                5,680 BTU/hr, maximum
>    - Acoustic noise             6.9 bels
>    - Height                     58.1 cm (22.87 in)
>    - Width                      44.8 cm (17.64 in)
>    - Depth                      69.6 cm (27.40 in)
>    - Weight                     94.0 kg (205 lb)
> 
>   Sun StorEdge T3 Array
>    - Power cables               Two NEMA 5-15
>    - AC power                   100-240 VAC @ 47-63 Hz single phas
>    - Heat output                1540 BTU/hr, maximu
>    - Sound power operating      6.6 Bels
>    - Height                     13.97 cm (5.5 in) (3.5U)
>    - Width                      44.45 cm (17.5 in)
>    - Depth                      46.99 cm (18.5 in)
>    - Weight                     30.15 kg (67 lb. maximum)
> 
>   APC Matrix 5000XR UPS
>    - Input Connection Type      NEMA L6-30P (30A Twist-Lock)
>    - Nominal input voltage      208V
>    - Input voltage range        156 - 252V
>    - Maximum height dimensions  26.90 inches (68.33 cm)
>    - Maximum width dimensions   13.80 inches (35.05 cm)
>    - Maximum depth dimensions   17.80 inches (45.21 cm)
>    - Net weight                 303.00 lbs ( 137.73 kg)
>    - Audible noise at 1 meter   60 dBA
>    - Online thermal dissipation 900 BTU/hr
> 
> Let me know if you need more information.
> 
> mike
> 
> On Nov 8,  1:26pm, Unidata Support wrote:
> > Subject: 20001108: power information Unidata machine bound for SSEC
> > >From: Dee Wade <address@hidden>
> > >Organization: SSEC
> > >Keywords: 200010241344.e9ODid411410 SSEC machine
> >
> > ------- Forwarded Message
> >
> > >From: Dee Wade <address@hidden>
> > >cc: Dee Wade <address@hidden>,
> > >cc: Jerrold Robaidek <address@hidden>
> >
> > Tom,
> >
> > I still need the info about the power etc. What I need to know is the
> > voltage (120V, 208V, single, 2 or 3 phase, etc) and amps of the raid,
> > the 450 and the UPS.
> >
> > My UPS is only at 33% capacity but adding more hardware will reduce how
> > long it will keep my h/w up so I am not sure I want to add your h/w to
> > my UPS. THere may be the need to add power to the computer room to
> > handle the this (usually raids need special power) and if that is the
> > case, them the issue of who pays for the electricians etc will have to
> > be addressed.
> >
> > So please if you can get me the power requirements and also if heat
> > output is listed, that would be helpful too.
> > Thanks
> >
> > Dee

-- 
Dee Wade
McIDAS User Services and SSEC Data Center 
Space Science and Engineering Center 
University of Wisconsin-Madison           Email:     address@hidden
1225 West Dayton Street                   Voice:     (608) 263-0527
Madison, WI  53706                        Fax:       (608) 263-6738