[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[netCDF #LCN-240709]: CMake problems

Tim,

> I've disabled all the HDF5 and netCDF4 options in the cmake GUI.  Based on a 
> new configuration error message and some research, I disabled DAP.  Does this 
> seem reasonable?
> 
> I'm now getting the following configuration error.  I'm not sure how to "set 
> them" as prompted by the message.  There were not any check boxes that were 
> readily obvious in the GUI.  Any thoughts?  Thanks so much again.

I'm not sure, being fairly new to CMake.  Our CMake expert will be back in the 
office next week,
and he should be able to answer your question.

--Russ

> CMake Summary:
> 
> Build Type:                   DEBUG
> Building Shared Libraries:    ON
> Building netCDF-4:            OFF
> Building DAP Support:         OFF
> Building Utilities:           ON
> Using pnetcdf:                        OFF,
> Using Parallel IO:            OFF
> Linking against:              ZLIB_LIBRARY-NOTFOUND
> 
> CMake Error: The following variables are used in this project, but they are 
> set to NOTFOUND.
> Please set them or make sure they are set and tested correctly in the CMake 
> files:
> ZLIB_LIBRARY (ADVANCED)
> linked by target "netcdf" in directory 
> C:/Users/twhawk/Documents/downloaded_programs/netcdf-4.3.0-rc3/liblib
> linked by target "ncgen" in directory 
> C:/Users/twhawk/Documents/downloaded_programs/netcdf-4.3.0-rc3/ncgen
> linked by target "nccopy" in directory 
> C:/Users/twhawk/Documents/downloaded_programs/netcdf-4.3.0-rc3/ncdump
> linked by target "ncdump" in directory 
> C:/Users/twhawk/Documents/downloaded_programs/netcdf-4.3.0-rc3/ncdump
> 
> Configuring incomplete, errors occurred!
> 
> **********************************************
> Timothy W. Hawkins
> Professor and Graduate Program Coordinator
> Department of Geography and Earth Science
> Shippensburg University
> 1871 Old Main Drive
> Shippensburg, PA 17257
> 
> Email: address@hidden
> Phone: (717) 477-1662
> Fax: (717) 477-4029
> Web: http://www.ship.edu/geo-ess/
> 
> 
> -----Original Message-----
> From: Unidata netCDF Support [mailto:address@hidden]
> Sent: Thursday, April 11, 2013 1:20 PM
> To: Hawkins, Timothy (Tim)
> Cc: address@hidden; Hawkins, Timothy (Tim)
> Subject: [netCDF #LCN-240709]: RE: Fwd: RE: unidata summer workshops
> 
> Hi Tim,
> 
> > Thanks for this.  I've been busy with other projects so I'm just getting 
> > back around to trying to get netCDF installed on my windows machine via the 
> > cmake GUI.  A couple of questions based on my research:
> >
> >
> >
> > ·         What exactly is HDF5 and do I need it if I’m just trying to 
> > access readily available netCDF files?
> 
> HDF5 is another format and library that netCDF-4 uses for its storage layer 
> to implement more performance features (e.g. compression, parallel I/O) as 
> well as an extended data model that has more primitive types and user-defined 
> types.
> 
> Here's 2 FAQs that provide more details about the relationship among 
> netCDF-3, netCDF-4, and HDF5:
> 
> http://www.unidata.ucar.edu/netcdf/docs/faq.html#fv4
> http://www.unidata.ucar.edu/netcdf/docs/faq.html#fv18
> 
> You don't netCDF-4 or HDF5 if the files you want to access use the default 
> netCDF-3 "classic" data model and format, or the 64-bit offset format.  
> Here's how you can
> tell:
> 
> http://www.unidata.ucar.edu/netcdf/docs/faq.html#fv1_5
> 
> > ·         If you think HDF5 worthwhile to have, it doesn’t appear that it 
> > is part of the netCDF download you directed me to?  Where would I find it 
> > and how do I instruct the cmake GUI to recognize it?
> 
> It's not part of netCDF, as it's developed, maintained, and supported by a 
> different organization.  If you decide you need netCDF-4 and the HDF5 library 
> it depends on, you can download it from the HDF Group site:
> 
> http://www.hdfgroup.org/HDF5/
> 
> If you download it in binary form and install that, you won't need CMake to 
> build it from source. But the HDF5 Group provides instructions for building 
> and installing it with CMake, in case you have a need for that.
> 
> > ·         If you don’t think HDF5 is necessary for my purposes, how do I 
> > instruct the cmake GUI to build without it?
> 
> You would provide the CMake option
> 
> -D"ENABLE_NETCDF_4=OFF"
> 
> as described in more detail here:
> 
> http://www.unidata.ucar.edu/netcdf/docs_rc/netCDF-CMake.html
> 
> > Sorry for what are probably pretty simplistic questions.  This is all new 
> > to me.  Thanks for your help!
> 
> No problem, glad to help ...
> 
> --Russ
> 
> > Tim
> >
> >
> >
> > **********************************************
> >
> > Timothy W. Hawkins
> >
> > Professor and Graduate Program Coordinator
> >
> > Department of Geography and Earth Science
> >
> > Shippensburg University
> >
> > 1871 Old Main Drive
> >
> > Shippensburg, PA 17257
> >
> >
> >
> > Email: address@hidden
> >
> > Phone: (717) 477-1662
> >
> > Fax: (717) 477-4029
> >
> > Web: http://www.ship.edu/geo-ess/
> >
> >
> >
> > -----Original Message-----
> > From: Unidata netCDF Support [mailto:address@hidden]
> > Sent: Wednesday, March 20, 2013 10:47 PM
> > To: Hawkins, Timothy (Tim)
> > Cc: address@hidden
> > Subject: [netCDF #LCN-240709]: RE: Fwd: RE: unidata summer workshops
> >
> >
> >
> > > Hi Russ,
> >
> > >
> >
> > > This was very helpful and I've made some progress now that I have CMake 
> > > supported version.  In the configuration step from the CMake GUI I'm 
> > > getting the following error that I'm hopeful you can help me resolve.
> >
> > >
> >
> > >
> >
> > >
> >
> > > Thanks again for all your help,
> >
> > >
> >
> > > Tim
> >
> > >
> >
> > >
> >
> > >
> >
> > > The C compiler identification is MSVC 17.0.50727.1
> >
> > >
> >
> > > Check for working C compiler using: Visual Studio 11
> >
> > >
> >
> > > Check for working C compiler using: Visual Studio 11 -- works
> >
> > >
> >
> > > Detecting C compiler ABI info
> >
> > >
> >
> > > Detecting C compiler ABI info - done
> >
> > >
> >
> > > Could NOT find PkgConfig (missing: PKG_CONFIG_EXECUTABLE)
> >
> >
> >
> > The failure to find pkg-config.exe on Windows is not a fatal error; the 
> > build should continue.
> >
> >
> >
> > > HDF5_LIB-NOTFOUND, HDF5_HL_LIB-NOTFOUND, HDF5_INCLUDE_DIR-NOTFOUND
> >
> > >
> >
> > > Could NOT find ZLIB (missing: ZLIB_LIBRARY ZLIB_INCLUDE_DIR)
> >
> >
> >
> > Here's an answer to a similar question from Ward Fisher, posted to the 
> > netcdfgroup mailing list:
> >
> >
> >
> > http://www.unidata.ucar.edu/mailing_lists/archives/netcdfgroup/2013/ms
> > g00161.html
> >
> >
> >
> > --Russ
> >
> >
> >
> >
> >
> > > CMake Error at CMakeLists.txt:403 (MESSAGE):
> >
> > >
> >
> > > HDF5 Support specified, cannot find ZLib.
> >
> > >
> >
> > > CMake Error: The following variables are used in this project, but they 
> > > are set to NOTFOUND.
> >
> > >
> >
> > > Please set them or make sure they are set and tested correctly in the 
> > > CMake files:
> >
> > >
> >
> > > HDF5_INCLUDE_DIR
> >
> > >
> >
> > > used as include directory in directory
> > > C:/Users/twhawk/Documents/downloaded_programs/netcdf-4.3.0-rc3
> >
> > >
> >
> > > used as include directory in directory
> > > C:/Users/twhawk/Documents/downloaded_programs/netcdf-4.3.0-rc3
> >
> > >
> >
> > > used as include directory in directory
> > > C:/Users/twhawk/Documents/downloaded_programs/netcdf-4.3.0-rc3
> >
> > >
> >
> > > used as include directory in directory
> > > C:/Users/twhawk/Documents/downloaded_programs/netcdf-4.3.0-rc3
> >
> > >
> >
> > >
> >
> > >
> >
> > > **********************************************
> >
> > >
> >
> > > Timothy W. Hawkins
> >
> > >
> >
> > > Professor and Graduate Program Coordinator
> >
> > >
> >
> > > Department of Geography and Earth Science
> >
> > >
> >
> > > Shippensburg University
> >
> > >
> >
> > > 1871 Old Main Drive
> >
> > >
> >
> > > Shippensburg, PA 17257
> >
> > >
> >
> > >
> >
> > >
> >
> > > Email: address@hidden<mailto:address@hidden>
> >
> > >
> >
> > > Phone: (717) 477-1662
> >
> > >
> >
> > > Fax: (717) 477-4029
> >
> > >
> >
> > > Web: http://www.ship.edu/geo-ess/
> >
> > >
> >
> > >
> >
> > >
> >
> > > -----Original Message-----
> >
> > > From: Unidata netCDF Support
> > > [mailto:address@hidden]
> >
> > > Sent: Tuesday, March 19, 2013 11:24 AM
> >
> > > To: Hawkins, Timothy (Tim)
> >
> > > Cc:
> > > address@hidden<mailto:address@hidden.e
> > > du>
> >
> > > Subject: [netCDF #LCN-240709]: RE: Fwd: RE: unidata summer workshops
> >
> > >
> >
> > >
> >
> > >
> >
> > > Hi Tim,
> >
> > >
> >
> > >
> >
> > >
> >
> > > > I've been fiddling with trying to install netCDF on windows using CMake 
> > > > as suggested in the link you sent me from last summer's workshop.  I've 
> > > > pasted the CMake error below but it looks like I'm missing or am not 
> > > > properly pointing to the directory that contains the "CMakeLists.txt" 
> > > > file.  Is this file a separate download? Is it included in my download 
> > > > of netCDF from unidata?  Should I be pointing to a subdirectory?  Any 
> > > > help is appreciated.
> >
> > >
> >
> > > > CMake Error: The source directory 
> > > > "C:/Users/twhawk/Documents/downloaded_programs/netcdf-4.2.1.1" does not 
> > > > appear to contain CMakeLists.txt.
> >
> > >
> >
> > >
> >
> > >
> >
> > > The netCDF version 4.2.1.1 release from last summer didn't contain the 
> > > CMake solution for building on Windows, which was only available at the 
> > > time from a separate web page with instructions for installing binary 
> > > releases built from CMake:
> >
> > >
> >
> > >
> >
> > >
> >
> > > http://www.unidata.ucar.edu/software/netcdf/CompileCMake.html
> >
> > >
> >
> > >
> >
> > >
> >
> > > However, the CMake support for building the netCDF C library on Windows 
> > > has now been integrated into a release candidate, netCDF-4.3-rc3, 
> > > available from:
> >
> > >
> >
> > >
> >
> > >
> >
> > > http://www.unidata.ucar.edu/downloads/netcdf/netcdf-rc
> >
> > >
> >
> > >
> >
> > >
> >
> > > with instructions for building here:
> >
> > >
> >
> > >
> >
> > >
> >
> > > http://www.unidata.ucar.edu/software/netcdf/docs_rc/winbin.html
> >
> > >
> >
> > >
> >
> > >
> >
> > > I hope that helps ...
> >
> > >
> >
> > >
> >
> > >
> >
> > > --Russ
> >
> > >
> >
> > >
> >
> > >
> >
> > > > -----Original Message-----
> >
> > >
> >
> > > > From: Russ Rew [mailto:address@hidden]
> >
> > >
> >
> > > > Sent: Wednesday, February 20, 2013 4:13 PM
> >
> > >
> >
> > > > To: support-netcdf
> >
> > >
> >
> > > > Cc:
> > > > address@hidden<mailto:address@hidden<mailto:
> > > > address@hidden%3cmailto:address@hidden>>
> >
> > >
> >
> > > > Subject: Re: Fwd: RE: unidata summer workshops
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Hi Tim,
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > ... Is there a crash course way I can learn netCDF.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > I'm interested in using readily available netCDF files in my own
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > research and teaching but don't really have any experience with
> > > > > the
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > format.  I've fiddled around with netCDF files a bit but I was
> >
> > >
> >
> > > > > hoping
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > > for a user's course.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > Yes, I'd recommend at least the first day's worth of material from last 
> > > > year's netCDF workshop:
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > http://www.unidata.ucar.edu/netcdf/workshops/2012/
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > That would be the first 20 sessions, and it's OK to skip around, as 
> > > > some of the subjects are independent of earlier material, but session 
> > > > 3, 5, 6, 7, and 9 are pretty basic.  Most of the material is short HTML 
> > > > pages and you can just use the icons in the upper or lower left of each 
> > > > page to navigate through the material, but some of the pages just link 
> > > > to PowerPoint presentations.
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > > --Russ
> >
> > >
> >
> > > >
> >
> > >
> >
> > > >
> >
> > >
> >
> > > Russ Rew                                         UCAR Unidata Program
> >
> > >
> >
> > > address@hidden<mailto:address@hidden<mailto:address@hidden%3cmailto:address@hidden>>
> > >                       http://www.unidata.ucar.edu
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > > Ticket Details
> >
> > >
> >
> > > ===================
> >
> > >
> >
> > > Ticket ID: LCN-240709
> >
> > >
> >
> > > Department: Support netCDF
> >
> > >
> >
> > > Priority: Normal
> >
> > >
> >
> > > Status: Closed
> >
> > >
> >
> > >
> >
> > >
> >
> > Russ Rew                                         UCAR Unidata Program
> >
> > address@hidden<mailto:address@hidden>                      
> > http://www.unidata.ucar.edu
> >
> >
> >
> >
> >
> >
> >
> > Ticket Details
> >
> > ===================
> >
> > Ticket ID: LCN-240709
> >
> > Department: Support netCDF
> >
> > Priority: Normal
> >
> > Status: Closed
> >
> >
> >
> Russ Rew                                         UCAR Unidata Program
> address@hidden                      http://www.unidata.ucar.edu
> 
> 
> 
> Ticket Details
> ===================
> Ticket ID: LCN-240709
> Department: Support netCDF
> Priority: Normal
> Status: Closed
> 
> 

Russ Rew                                         UCAR Unidata Program
address@hidden                      http://www.unidata.ucar.edu



Ticket Details
===================
Ticket ID: LCN-240709
Department: Support netCDF
Priority: Normal
Status: Closed