[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[netCDF #KVV-602932]: installation problems

Yay! No problem, glad I was able to help :-)

Sean

> It worked!!!!
> 
> If you were here I'll invite you to have a beer to celebrate it!!
> 
> Thanks a lot! really, you saved my day!
> 
> Cheers
> 
> Maria
> 
> 
> ________________________________________
> De: Unidata netCDF Support [address@hidden]
> Enviado el: lunes, 13 de junio de 2011 18:13
> Para: Martin Calvo, Maria
> CC: address@hidden
> Asunto: [netCDF #KVV-602932]: installation problems
> 
> Hi Maria,
> 
> > Thanks for answering so quickly!...but still, the error doesn't go..
> >
> 
> It looks like you set FFFLAGS instead of FFLAGS (added an extra F):
> 
> lt_cv_ld_force_load=no CFLAGS="-arch x86_64 -g -O2" CXXFLAGS="-arch x86_64 -g 
> -O2" FCFLAGS="-m64 -g -O2" FFFLAGS="-m64 -g -O2" ./configure 
> --prefix=/home/mmartinc/local --disable-netcdf-4
> 
> and so FFLAGS didn't get correctly set again. Give this one a try:
> 
> lt_cv_ld_force_load=no CFLAGS="-arch x86_64 -g -O2" CXXFLAGS="-arch x86_64 -g 
> -O2" FCFLAGS="-m64 -g -O2" FFLAGS="-m64 -g -O2" ./configure 
> --prefix=/home/mmartinc/local --disable-netcdf-4
> 
> > Sorry for bothering you so much!
> >
> 
> No bother at all - we'll get this fixed up!
> 
> Sean
> 
> > Cheers
> >
> > Maria
> >
> >
> > Maria Martin Calvo
> > Marie Curie Early-Stage Researcher
> > address@hidden
> >
> > Imperial College (Silwood Park Campus)
> > SL5 7PY Ascot, Berkshire
> > UK
> > ________________________________________
> > De: Unidata netCDF Support [address@hidden]
> > Enviado el: lunes, 13 de junio de 2011 17:26
> > Para: Martin Calvo, Maria
> > CC: address@hidden
> > Asunto: [netCDF #KVV-602932]: installation problems
> >
> > Hi Maria,
> >
> > It looks like the FFLAGS variable didn't get set= with -m64.
> >
> > configure:24283: checking FFLAGS
> > configure:24285: result: -g -O2
> >
> > There was a typo in the command I sent you in setting FFLAGS (sorry about 
> > that - need more coffee). Try:
> >
> > lt_cv_ld_force_load=no CFLAGS="-arch x86_64" CXXFLAGS="-arch x86_64" 
> > FCFLAGS="-m64" FFLAGS="-m64"  ./configure --prefix=/home/mmartinc/local 
> > --disable-netcdf-4
> >
> > I had FFLAGS="=-m64" instead of FFLAGS="-m64". You could also add "-g -O2" 
> > to each of those flags as well (e.g. CFLAGS="-arch x86_64 -g -O2").
> >
> > I tested this on my mac with the same gcc and gfortran and it worked (for 
> > 32 and 64 bit). Hopefully we can get it going for you too. I did find that 
> > if I removed FFLAGS, then the config failed where it fails for you.
> >
> > Cheers!
> >
> > Sean
> > > Sorry, I forgot to send you the output of the ./configure
> > >
> > > Thank you!!
> > >
> > > Maria
> > >
> > > ________________________________________
> > > De: Unidata netCDF Support [address@hidden]
> > > Enviado el: lunes, 13 de junio de 2011 16:34
> > > Para: Martin Calvo, Maria
> > > CC: address@hidden
> > > Asunto: [netCDF #KVV-602932]: installation problems
> > >
> > > Greetings and good morning to you as well Maria!
> > >
> > > > Good morning,
> > > >
> > > > I've been trying to install the netcdf libraries for some days, 
> > > > following
> > > > the recommendations from your website and some forums.
> > > >
> > > > I'm using a Mac 64 bit machine, and I've tried different versions of
> > > > the netcdf files, with similar results.
> > > >
> > > > I send you the outputs from running ./configure and the consecuent
> > > > config.log from the netcdf beta version (4.1.3-rc1).
> > > >
> > > > I always get the same error (checking if Fortran "byte" is C "signed
> > > > char". .. configure: error: Could not link conftestf.o and conftest.o),
> > > > and following the instructions for similar cases just leads me to
> > > > different errors. (doing FC=g95, export FC> configure:error:fortran
> > > > could not compile f90 files)
> > > >
> > >
> > > Please give this a try:
> > >
> > > lt_cv_ld_force_load=no CFLAGS="-arch x86_64" CXXFLAGS="-arch x86_64" 
> > > FCFLAGS="-m64" FFLAGS="=-m64"  ./configure --prefix=/home/mmartinc/local 
> > > --disable-netcdf-4
> > >
> > > The lt_cv_ld_force_load=no will take care of a problem that you would 
> > > have ran into during `make` if you were able to get `configure` to run 
> > > (it's an issue with differences in `libtool` and `ld` on the Mac). The 
> > > rest are compile flags (assuming you want 64bit, otherwise change x96_64 
> > > to i386 and -m64 to -m32).
> > >
> > > If this works for you, be sure to run `make check` after `make` to see if 
> > > it passes the tests.
> > >
> > > Cheers!
> > >
> > > Sean Arms
> > >
> > >
> > > > Thank you in advance for any help...this is driving me crazy!
> > > >
> > > > Best regards
> > > >
> > > > Maria
> > > >
> > > >
> > > >
> > >
> > >
> > > Ticket Details
> > > ===================
> > > Ticket ID: KVV-602932
> > > Department: Support netCDF
> > > Priority: Normal
> > > Status: Open
> > >
> > >
> > >
> >
> >
> > Ticket Details
> > ===================
> > Ticket ID: KVV-602932
> > Department: Support netCDF
> > Priority: Normal
> > Status: Open
> >
> >
> >
> 
> 
> Ticket Details
> ===================
> Ticket ID: KVV-602932
> Department: Support netCDF
> Priority: Normal
> Status: Open
> 
> 
> 


Ticket Details
===================
Ticket ID: KVV-602932
Department: Support netCDF
Priority: Normal
Status: Closed