Hi John,
I was pulled away from BUFR to do other things and I'm just starting to
look at it again. I need to apply the time increments to the water
column heights in the DART messages. For example (the BufrDataDump is
below),
7/12/2009 18:15:00 4919.7451171875
7/12/2009 18:30:00 4919.68310546875
7/12/2009 18:45:00 4919.6240234375
7/12/2009 19:00:00 4919.5703125
I would like to do this for all BUFR messages where increments are used.
Is there a way to easily do this using the BUFR libraries? If not (just
out of curiosity), have other users inquired about this capability?
Thanks!
Michelle
Message 0 header=964IOZK01 AMMC 130013
Sequence obs count=0
var='time' units='secs since 2009-07-12T00:13:13Z' : 0.0
var='Buoy/platform identifier' units='null' : 55013.0
var='Platform transmitter ID' units='CodeTable 0-1-52' : 1.0
var='Deep-ocean tsunameter type' units='CodeTable 0-2-47' : 1.0
var='Year' units='Year' : 2009.0
var='Month' units='Month' : 7.0
var='Day' units='Day' : 12.0
var='Hour' units='Hour' : 0.0
var='Minute' units='Minute' : 13.0
var='Second' units='Second' : 13.0
var='sampling interval (time)' units='Second' : 900.0
var='sample averaging period' units='Second' : 15.0
var='Number of samples' units='null' : 1.0
Sequence seq1 count=0
var='Quality information' units='CodeTable 0-33-2' : Data not
suspect
var='Year' units='Year' : 2009.0
var='Month' units='Month' : 7.0
var='Day' units='Day' : 12.0
var='Hour' units='Hour' : 18.0
var='Minute' units='Minute' : 15.0
var='Second' units='Second' : 0.0
var='Battery voltage' units='V' : 14.699999809265137
var='Battery voltage-1' units='V' : 4.099999904632568
var='Battery voltage (large range)' units='V' : 26.0
var='BPR transmission count' units='null' : 1.0
var='Time increment' units='Minute' : -15.0
var='Short time increment' units='Minute' : 15.0
var='Water column height' units='m' :
4919.7451171875,4919.68310546875,4919.6240234375,4919.5703125
