[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[GEMPAK #GRF-150275]: GEMPAK installation on Ubuntu

Hi Giulio,

I was looking at this again yesterday and think i found something.  But first 
can you confirm that you've copied $NAWIPS/config/Makeinc.linux_gfortran_ubuntu 
to $NAWIPS/config/Makeinc.linux_gfortran ?

It's essential that this is done, but the odd thing is it doesn't explain the 
strange behavior here:

In your make.out file I see

if [ ! -f /home/gian/gempak/GEMPAK6.2.0/os/linux/include/MCHPRM.PRM ] ; then \
           ln -s 
/home/gian/gempak/GEMPAK6.2.0/gempak/include/MCHPRM.linux_gfortran 
/home/gian/gempak/GEMPAK6.2.0/os/linux/include/MCHPRM.PRM ; \
        fi

This command is creating a symbolic link in $NA_OS/include/ to 

$GEMPAK/include/MCHPRM.linux_gfortran

when it should link to 

$GEMPAK/include/MCHPRM.Linux_gfortran (with a capital L)

Additionally I'm seeing "-Dlinux" rather than "-DLinux" 

The first line of $NAWIPS/config/Makeinc.linux_gfortran_ubuntu (or 
Makeinc.linux_gfortran) defines the variable OPSYS as Linux - can you confirm 
that this is capitalized?   Any chance you edited this file and changed it to 
lower case?

Let's check these definitions first.

Michael
Unidata



> Any news on this?
> 
> Giulio Todini
> Supervisor, Global Navigation Services
> GNS –Operation Support Services
> ______________________________________
> Jeppesen Marine
> A Boeing Company
> phone: +39 0585 794952 | fax: +39 0585 794715|int.:324952|address@hidden
> Jeppesen Italia S.r.l., Via Dorsale 9 | 54100 Massa, Italy www.jeppesen.com
> 
> 
> -----Original Message-----
> From: Unidata GEMPAK Support [mailto:address@hidden]
> Sent: Friday, October 14, 2011 1:56 AM
> To: Gianandrea Mannarini-ITA
> Cc: address@hidden; Giulio Todini-ITA
> Subject: [GEMPAK #GRF-150275]: GEMPAK installation on Ubuntu
> 
> This is a strange one because your build should reference 
> $GEMPAK/include/MCHPRM.Linux which defines MTMACH= MTLNUX
> 
> Probably best to send the entire make.out log so I can take a look.
> 
> We might just need to make a small edit to ggasrd.c as a workaround.
> 
> Michael
> Unidata
> 
> 
> 
> > Good morning.
> >
> > I am trying to install GEMPAK on Ubuntu 10.04.
> >
> > I proceed as on
> >
> > http://www.unidata.ucar.edu/software/gempak/GEMPAK/Install_GEMPAK.html
> >
> > When in $NAWIPS folder I give following commands:
> > make distclean
> > make all >&  make.out
> >
> > I get at some point:
> >
> > gcc -DUNDERSCORE -Dlinux -I/home/gian/gempak/GEMPAK6.2.0/gempak/include
> > -I/home/gian/gempak/GEMPAK6.2.0/os/linux/include -I/usr/X11R6/include
> > -g  -O -DNO_MSG_IPC -ansi -c ggasrd.c
> > ggasrd.c: In function 'gg_asrd_':
> > ggasrd.c:223: error: 'MTMACH' undeclared (first use in this function)
> > ggasrd.c:223: error: (Each undeclared identifier is reported only once
> > ggasrd.c:223: error: for each function it appears in.)
> > make[4]: ***
> > [/home/gian/gempak/GEMPAK6.2.0/os/linux/lib/gemlib.a(ggasrd.o)] Error 1
> > make[4]: Leaving directory
> > `/home/gian/gempak/GEMPAK6.2.0/gempak/source/gemlib/gg'
> >
> > I attach the whole make.out for full reference.
> > What could I do/check for going on with compilation?
> > Can you please help me?
> >
> > Thank you so much.
> >
> > --
> > Gianandrea Mannarini
> > Marine Data Analyst
> > ________________________________________________
> > Jeppesen
> > A Boeing Company
> > ph +39-0585-794951| fax: +39-0585-794959| address@hidden
> > Jeppesen Italia s.r.l.
> > Centro Direzionale Olidor Via Dorsale 9, scala B | 54100 Massa (MS) | ITALY
> >
> 
> 
> Ticket Details
> ===================
> Ticket ID: GRF-150275
> Department: Support GEMPAK
> Priority: Normal
> Status: Open
> 
> 


Ticket Details
===================
Ticket ID: GRF-150275
Department: Support GEMPAK
Priority: Normal
Status: Open