[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 20050505: gptraj, gpanot, gf driver - is there a better way to overlay images?



Steve,

Looks like the problem is solved now --

I had GPOINT=43/46/1;-96/-100/1
Changed to GPOINT=43/46/1;-100/-96/1

Thanks.

Sincerely,
Chirag.



-----Original Message-----
From: SHUKLA, CHIRAG 
Sent: Friday, May 13, 2005 10:18 AM
To: Unidata Support
Subject: RE: 20050505: gptraj, gpanot, gf driver - is there a better way
to overlay images? 

Steve,

All of a sudden, I am getting an error in gptraj:
 [TG 0] F0-F12
 Error specifying lat/lon/increment: 
 43/46/1;-96/-100/1                   

What could be wrong? When I see the processes,  I dont see gplt process
and everything else seems alright.  A few days back everything was
running okay and nothing changed on the system. What would you suggest?

Thanks.

Sincerely,
Chirag Shukla


Here is the output of the cshell script:

 MAP       Map color/dash/width/filter flag  10
 GAREA     Graphics area                     uslcc
 PROJ      Map projection/angles/margins|dr  lcc
 SATFIL    Satellite image filename(s)        
 RADFIL    Radar image filename(s)            
 LUTFIL    Enhancement lookup table filenam   
 IMCBAR    Color/ornt/anch/x;y/ln;wd/freq|t   
 LATLON    Line color/dash/width/freq/inc/l  11
 PANEL     Panel loc/color/dash/width/regn   0
 TITLE     Title color/line/title            12/0/File: 20050513 00Z
12hr forecast at 850mb
 TEXT      Size/fnt/wdth/brdr/N-rot/just/hw  1/21/1/hw
 CLEAR     Clear screen flag                 YES
 DEVICE    Device|name|x size;y size|color
GIF|/home/gempak/scripts/gptraj/eastriver/05130012850.gif|750;550
 GDFILE    Grid file
/home/gempak/unidataldm/ldm/gempak/model/2005051300_eta212.gem
 GVECT     Vector grid                       WND
 GPOINT    Grid point                        43/46/1;-96/-100/1
 GLEVEL    Grid level                        850
 GVCORD    Grid vertical coordinate          PRES
 GDATTIM   Grid date/time                    F0-F12
 TSTEP     Time step (minutes)                
 MARKER    Marker color/type/size/width/hw   0
 LINE      Color/type/width/label/smth/fltr  4
 RTRAJ     Back/Reverse trajectory flag      YES
 Parameters requested:
MAP,GAREA,PROJ,SATFIL,RADFIL,LUTFIL,IMCBAR,LATLON,
 
PANEL,TITLE,TEXT,CLEAR,DEVICE,GDFILE,GVECT,GPOINT,GLEVEL,GVCORD,GDATTIM,
 TSTEP,MARKER,LINE,RTRAJ.
 GEMPAK-GPTRAJ> GEMPAK-GPTRAJ> GEMPAK-GPTRAJ> GEMPAK-GPTRAJ>
GEMPAK-GPTRAJ> GEMPAK-GPTRAJ> GEMPAK-GPTRAJ> GEMPAK-GPTRAJ>
GEMPAK-GPTRAJ> GEMPAK-GPTRAJ> GEMPAK-GPTRAJ> GEMPAK-GPTRAJ>
GEMPAK-GPTRAJ> GEMPAK-GPTRAJ> GEMPAK-GPTRAJ> GEMPAK-GPTRAJ>
GEMPAK-GPTRAJ> GEMPAK-GPTRAJ> GEMPAK-GPTRAJ> GEMPAK-GPTRAJ>
GEMPAK-GPTRAJ> GEMPAK-GPTRAJ> GEMPAK-GPTRAJ> GEMPAK-GPTRAJ>
GEMPAK-GPTRAJ> GPMAP PARAMETERS:

 Device:
GIF|/home/gempak/scripts/gptraj/eastriver/05130012850.gif|750;550

 Projection:          lcc

 Graphics area name:  uslcc

 Map:                 10

 Title:               12/0/File: 20050513 00Z 12hr forecast at 850mb

 Panel:               0

 Latlon:              11

 Grid time range:     F0-F12

 Grid file:
/home/gempak/unidataldm/ldm/gempak/model/2005051300_eta212.gem

 Grid Vector:         WND

 Grid level:          850

 Vertical Coordinate: PRES

 Back Trajectory:     YES
 Time Step:

 Clear:               YES
 [TG 0] F0-F12
 Error specifying lat/lon/increment: 
 43/46/1;-96/-100/1





-----Original Message-----
From: Unidata Support [mailto:address@hidden]
Sent: Fri 5/6/2005 3:44 PM
To: SHUKLA, CHIRAG
Cc: address@hidden
Subject: 20050505: gptraj, gpanot, gf driver - is there a better way to
overlay images? 
 

Chirag,

The "southward" facing arrow is a new bug introduced by the gemlib
routine pd_drct() calling sequence being changed and wasn't updated in
the ggtraj() routine of gptraj.
I have fixed this now that you called my attention to the problem.

The arrow should be pointing in the direction of the last vector in the
trajectory.

If you built the distribution locally, I can send you the changes.
Otherwise, your need a new binary.

Steve Chiswell
Unidata User Support









>From: "SHUKLA, CHIRAG" <address@hidden>
>Organization: UCAR/Unidata
>Keywords: 200505060434.j464Y9P3010877

>This is a multi-part message in MIME format.
>
>------_=_NextPart_001_01C551F4.D463BBD9
>Content-Type: text/plain;
>       charset="iso-8859-1"
>Content-Transfer-Encoding: quoted-printable
>
>Hello,
>
>I have been using gptraj to create reverse trajectory profiles. Here is

>= an example:
>http://climate.sdstate.edu/downloads/gptrajnew/043000361000.gif
>
>I was wondering if we had an arrow of some kind that would indicate the

>= path of the trajectory. I tried using markers. It looked too crowded 
>= sometimes and an arrow facing south appeared at each gridpoint. We 
>didnt = want the arrow facing south. Other option was pursued - the use

>of = gpanot recursively to put a little star at each gridpoint location

>so as = to indicate where the end-points were. Here is an example of 
>the image = we wanted:=20 
>http://climate.sdstate.edu/downloads/gptrajnew/abc.gif
>
>The script I wrote follows soon. The question is -- is there a better =

>way of doing this? Another question is -- when I tried using GIF 
>driver, = trajectories were created successfully but the stars (using 
>gpanot) were = not created on the map. All I did was replace GF with 
>GIF. Was I missing = something --or-- was GIF driver not appropriate 
>for overlays? When I = used GF driver, everything seemed to fall in
place.
>
>Here goes the script:
>
>#!/bin/csh
>
># trajectory
># USAGE: ./gptrajnew 925 12 00 for 925mb 12hour forecast and 00Z file #

>USAGE: ./gptrajnew 0 48 12 for 0mb 48hour forecast and 12Z file
>
>source $GEMPAKSTART/Gemenviron
>cd /home/gempak/unidataldm/ldm/gempak/model/
>
>setenv GEMCOLTBL coltbl.xwp
>
>set utcdate =3D `date +%Y%m%d`
>#set utcdate =3D 20050503
>set displaydate =3D `echo $utcdate | awk '{print substr($0,5)}'` set 
>zvalue =3D $3 set hourvalue =3D $2 set height =3D $1 set title =3D 
>"File: ${utcdate} ${zvalue}Z ${hourvalue}hr forecast at = ${height}mb"
>
>set filen =3D =
>"/home/gempak/web_on_lancer/climate/downloads/gptrajnew/"${displaydate}
>${=
>zvalue}${hourvalue}${height}".gif"
>#set filen =3D =
>"/home/gempak/web_on_lancer/climate/downloads/gptrajnew/abc.gif"
>
>set DEVICE =3D "GF|"${filen}"|750;550"
>
>if ( -e ${filen} ) then
>       rm ${filen}
>endif
>
>gptraj << EOF > /home/gempak/scripts/gptraj/gptrajnew_out
>       MAP             =3D     10
>       GAREA   =3D     uslcc
>       PROJ    =3D     lcc
>       SATFILE =3D
>       RADFIL  =3D
>       LUTFIL  =3D
>       IMCBAR  =3D
>       LATLON  =3D     11
>       PANEL   =3D     0
>       TITLE   =3D     12/0/${title}
>       TEXT    =3D     1/21/1/hw
>       CLEAR   =3D     YES
>       !DEVICE =3D     ${DEVICE}
>       GDFILE  =3D     =
>/home/gempak/unidataldm/ldm/gempak/model/${utcdate}${3}_eta212.gem
>       GVECT   =3D     WND
>       GPOINT  =3D     43/46/1;-98/-96/1
>       GLEVEL  =3D     $1
>       GVCORD  =3D     PRES
>       GDATTIM =3D     F0-F$2
>       TSTEP   =3D
>       MARKER  =3D     0
>       LINE    =3D     4
>       RTRAJ   =3D     YES
>       run
>
>       exit
>EOF
>
>foreach i (43 44 45 46)
>       foreach j (-98 -97 -96)
>               set loci1 =3D "#"${i}";"${j}
>                       gpanot << EOF1 >>
/home/gempak/scripts/gptraj/gptrajnew
> _out
>                               GDFILE  =3D=09
>                               SATFIL  =3D
>                               RADFIL  =3D
>                               PROJ    =3D     lcc
>                               GAREA   =3D     uslcc
>                               PANEL   =3D     0
>                               DEVICE  =3D     ${DEVICE}
>                               CLEAR   =3D     no
>                               SHAPE   =3D     marker
>                               INFO    =3D     14/1
>                               LOCI    =3D     ${loci1}
>                               LINE    =3D     4
>                               CTYPE   =3D=09
>                               r
>                       =09
>                               e
>                       EOF1
>
>       end
>end
>
>gpend
>
>
>
>Thank you very much.
>
>Sincerely,
>Chirag Shukla
>Climate Data Specialist
>Box 2120, Ag Engineering
>South Dakota State University
>Brookings, SD 57007
>(605) 688-5682
>http://climate.sdstate.edu
>
>
>
>
>
>
>
>------_=_NextPart_001_01C551F4.D463BBD9
>Content-Type: text/html;
>       charset="iso-8859-1"
>Content-Transfer-Encoding: quoted-printable
>
><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN"> <HTML> <HEAD> <META 
>HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = 
>charset=3Diso-8859-1"> <META NAME=3D"Generator" CONTENT=3D"MS Exchange 
>Server version = 6.5.7232.36"> <TITLE>gptraj, gpanot, gf driver - is 
>there a better way to overlay = images?</TITLE> </HEAD> <BODY>
><!-- Converted from text/plain format -->
>
><P><FONT SIZE=3D2>Hello,<BR>
><BR>
>I have been using gptraj to create reverse trajectory profiles. Here is

>= an example:<BR> <A = 
>HREF=3D"http://climate.sdstate.edu/downloads/gptrajnew/043000361000.gif
>">= 
>http://climate.sdstate.edu/downloads/gptrajnew/043000361000.gif</A><BR>
><BR>
>I was wondering if we had an arrow of some kind that would indicate the

>= path of the trajectory. I tried using markers. It looked too crowded 
>= sometimes and an arrow facing south appeared at each gridpoint. We 
>didnt = want the arrow facing south. Other option was pursued - the use

>of = gpanot recursively to put a little star at each gridpoint location

>so as = to indicate where the end-points were. Here is an example of 
>the image = we wanted:<BR> <A = 
>HREF=3D"http://climate.sdstate.edu/downloads/gptrajnew/abc.gif";>http://
>cl= imate.sdstate.edu/downloads/gptrajnew/abc.gif</A><BR>
><BR>
>The script I wrote follows soon. The question is -- is there a better =

>way of doing this? Another question is -- when I tried using GIF 
>driver, = trajectories were created successfully but the stars (using 
>gpanot) were = not created on the map. All I did was replace GF with 
>GIF. Was I missing = something --or-- was GIF driver not appropriate 
>for overlays? When I = used GF driver, everything seemed to fall in 
>place.<BR> <BR> Here goes the script:<BR> <BR> #!/bin/csh<BR> <BR> # 
>trajectory<BR> # USAGE: ./gptrajnew 925 12 00 for 925mb 12hour forecast

>and 00Z = file<BR> # USAGE: ./gptrajnew 0 48 12 for 0mb 48hour forecast

>and 12Z file<BR> <BR> source $GEMPAKSTART/Gemenviron<BR> cd 
>/home/gempak/unidataldm/ldm/gempak/model/<BR>
><BR>
>setenv GEMCOLTBL coltbl.xwp<BR>
><BR>
>set utcdate =3D `date +%Y%m%d`<BR>
>#set utcdate =3D 20050503<BR>
>set displaydate =3D `echo $utcdate | awk '{print substr($0,5)}'`<BR> 
>set zvalue =3D $3<BR> set hourvalue =3D $2<BR> set height =3D $1<BR> 
>set title =3D &quot;File: ${utcdate} ${zvalue}Z ${hourvalue}hr forecast

>= at ${height}mb&quot;<BR> <BR> set filen =3D = 
>&quot;/home/gempak/web_on_lancer/climate/downloads/gptrajnew/&quot;${di
>sp= laydate}${zvalue}${hourvalue}${height}&quot;.gif&quot;<BR>
>#set filen =3D =
>&quot;/home/gempak/web_on_lancer/climate/downloads/gptrajnew/abc.gif&qu
>ot=
>;<BR>
><BR>
>set DEVICE =3D &quot;GF|&quot;${filen}&quot;|750;550&quot;<BR>
><BR>
>if ( -e ${filen} ) then<BR>
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; rm ${filen}<BR> endif<BR> 
><BR> gptraj &lt;&lt; EOF &gt; 
>/home/gempak/scripts/gptraj/gptrajnew_out<BR>
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; MAP&nbsp;&nbsp;&nbsp;&nbsp; 
>= &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 10<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; GAREA&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; uslcc<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; PROJ&nbsp;&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; lcc<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; SATFILE =3D<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; RADFIL&nbsp; =3D<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LUTFIL&nbsp; =3D<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; IMCBAR&nbsp; =3D<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LATLON&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 11<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; PANEL&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; TITLE&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 12/0/${title}<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; TEXT&nbsp;&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1/21/1/hw<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; CLEAR&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; YES<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; !DEVICE = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ${DEVICE}<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; GDFILE&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>/home/gempak/unidataldm/ldm/gempak/model/${utcdate}${3}_eta212.gem<BR>
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; GVECT&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; WND<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; GPOINT&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 43/46/1;-98/-96/1<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; GLEVEL&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; $1<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; GVCORD&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; PRES<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; GDATTIM = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; F0-F$2<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; TSTEP&nbsp;&nbsp; =3D<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; MARKER&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LINE&nbsp;&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 4<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; RTRAJ&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; YES<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; run<BR> <BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; exit<BR> EOF<BR> <BR> 
>foreach i (43 44 45 46)<BR> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 
>foreach j (-98 -97 -96)<BR> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 
>= &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; set loci1 =3D = 
>&quot;#&quot;${i}&quot;;&quot;${j}<BR>
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; gpanot &lt;&lt; EOF1 
>&gt;&gt; = /home/gempak/scripts/gptraj/gptrajnew_out<BR>
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; GDFILE&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<BR>
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; SATFIL&nbsp; =3D<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; RADFIL&nbsp; =3D<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; PROJ&nbsp;&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; lcc<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; GAREA&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; uslcc<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; PANEL&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; DEVICE&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ${DEVICE}<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; CLEAR&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; no<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; SHAPE&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; marker<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; INFO&nbsp;&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 14/1<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LOCI&nbsp;&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; ${loci1}<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; LINE&nbsp;&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 4<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; CTYPE&nbsp;&nbsp; = 
>=3D&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<BR>
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; r<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<BR>
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; e<BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; = 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; EOF1<BR> <BR> 
>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; end<BR> end<BR> <BR> 
>gpend<BR> <BR> <BR> <BR> Thank you very much.<BR> <BR> Sincerely,<BR> 
>Chirag Shukla<BR> Climate Data Specialist<BR> Box 2120, Ag 
>Engineering<BR> South Dakota State University<BR> Brookings, SD 
>57007<BR>
>(605) 688-5682<BR>
><A =
>HREF=3D"http://climate.sdstate.edu";>http://climate.sdstate.edu</A><BR>
><BR>
><BR>
><BR>
><BR>
><BR>
><BR>
></FONT>
></P>
>
></BODY>
></HTML>
>------_=_NextPart_001_01C551F4.D463BBD9--
>
--
************************************************************************
**** <
Unidata User Support                                    UCAR Unidata
Program <
(303)497-8643                                                  P.O. Box
3000 <
address@hidden                                   Boulder, CO
80307 <
------------------------------------------------------------------------
---- <
Unidata WWW Service
http://my.unidata.ucar.edu/content/support  <
------------------------------------------------------------------------
---- <
NOTE: All email exchanges with Unidata User Support are recorded in the
Unidata inquiry tracking system and then made publicly available through
the web.  If you do not want to have your interactions made available in
this way, you must let us know in each email you send to us.