[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 20020307: XFree86 server

Christopher,

GEMPAK can read the NEXRAD products as they are in the IDD data stream.
Sample pqact.conf actions are available at:
http://www.unidata.ucar.edu/packages/gempak/examples/pqact/pqact.html

In particular, for the NEXRAD data:
NEXRAD<tab>^SDUS[2357]. .... ([0-3][0-9])([0-2][0-9])([0-6][0-9]).*/p(...)(...)
  <tab>    FILE <tab> -close 
<tab>data/gempak/nexrad/NIDS/\5/\4/\4_(\1:yyyy)(\1:mm)\1_\2\3


Mind the tabs above in pqact.conf. This data/gempak/nexrad directory will be
under your ~ldm location

In Gemenviron, set RAD to be the path to ~ldm/data/gempak/NEXRAD.

Steve Chiswell
Unidata User Support


On Tue, 19 Mar 2002, CHRISTOPHER HAMMOND wrote:

> Steve,
> thanks for the help!
>
> I changed X environs to KDE and GARP started right up,
> but was wondering...i can't get any products to look at using my graphical
> programs (i'm only interested in the graphics right now, nowrad to be
> exact)
>
> does pqact do the necesary decoding for the gempak or do i need another
> decoder?...and what about the device drivers?...i'm confrused
>
> any advice is greatly appreciated
> chris
>
> On Mon, 18 Mar 2002, Steve Chiswell wrote:
>
> >
> >
> > Christopher,
> >
> > In regards to running GEMPAK on a RedHat 7.2 system using the
> > XFree86 server:
> >
> > Yes, GEMPAK runs on Linux using the XFree86 server. When running
> > under linux, you should run the linuxconfig and set the
> > display to be 8 bits (256 colors)
> >
> > See other configuration information:
> > http://www.unidata.ucar.edu/glimpse/gempak/4898
> > http://www.unidata.ucar.edu/glimpse/gempak/4586
> >
> > Use the KDE, FVWM or TWM window managers. Gnome allocates all colors as
> > read-only which is not compatible with GEMPAK.
> >
> > Another solution is to run 2 X servers, one in 24 bit mode, the other in 8 
> > bit
> > mode, and hot swap between then using the cntl-F7/F8.
> >
> >
> > Steve Chiswell
> > Unidata User Support
> >
> >
> >
> > > Date: Mon, 18 Mar 2002 16:24:15 -0500 (EST)
> > > From: CHRISTOPHER HAMMOND <address@hidden>
> > > To: Robb Kambic <address@hidden>
> > > Subject: Re: 20020307: LDM from WSI system
> > >
> > > Robb,
> > > ...ok, now i've gotten a LDM product queue sent to my box with Gempak on
> > > it, but can't run garp because i am running XFree86 and i've read that it
> > > doesn't support pseudocolor (which is needed for Garp)...do you know of
> > > any X servers that support this or a workaround, if possible
> > >
> > > also, the pqact.conf entries i used looked to be for nexrad feeds, but had
> > > a WSI feetype, will this handle my NOWrad?
> > >
> > > thanks for your expertise
> > > chris
> > > address@hidden
> > >
> > >
> > > On Fri, 8 Mar 2002, Robb Kambic wrote:
> > >
> > > > On Fri, 8 Mar 2002, CHRISTOPHER HAMMOND wrote:
> > > >
> > > > > Robb,
> > > > > I am having server problems and am unsure if you get my last email,so 
> > > > > I am
> > > > > resending.
> > > > >
> > > > > Thanks for the prompt reply!!
> > > > > Here are the specs on my particular site config:
> > > > >
> > > > > only two computers:
> > > > >
> > > > > 1) WSI hcsn (high capacity satellite network) consisting of a wsi HP 
> > > > > box
> > > > > running Solaris v5.x, there are NO unidata products installed on this
> > > > > machine at this time...I would like to take the data coming into this 
> > > > > box
> > > > > from the satellite on my roof and send it to my downstream RedHat 7.2 
> > > > > box
> > > > > at 192.168.1.1 which has an LDM on it and will have Gempak when I get 
> > > > > the
> > > > > feed working correctly
> > > >
> > > > lappin,
> > > >
> > > > Could you look for two programs on the machine: das2ldm_nexrad and
> > > > das2ldm_nowrad? On our WSI box we have 2 lines in the LDM etc/ldmd.conf
> > > > file to get the products:
> > > >
> > > > exec    "/opt/das2ldm/bin/das2ldm_nexrad -l /dev/null -q
> > > > /opt/ldm/data/ldm.pq"
> > > > exec    "/opt/das2ldm/bin/das2ldm_nowrad -l /dev/null -q
> > > > /opt/ldm/data/ldm.pq"
> > > >
> > > > These program take the place of pqing program to get the products into 
> > > > the
> > > > LDM.  If you don't have these programs, how do you get the products?  
> > > > Also
> > > > I would contact WSI about this issue. We have worked with WSI, so they
> > > > should have the configuration needed to get the products into the LDM.
> > > > They might have changed the configuration because our WSI box is about 5
> > > > years old. If the configuration is different, can  you let me know for 
> > > > any
> > > > future questions.
> > > >
> > > > Thanks,
> > > > Robb...
> > > >
> > > >
> > > >
> > > > >
> > > > > 2) RedHat 7.2 which has an ldm and will have a gempak installed on it 
> > > > > once the feed is
> > > > > coming in from the wsi box
> > > > >
> > > > > hopefully these details will help you out...if you need ANY other 
> > > > > info,
> > > > > you know where to find me.
> > > > > Thanks very much for your kind help, it is GREATLY appreciated!!
> > > > > sincerely
> > > > > lappin
> > > > >
> > > > >
> > > > >
> > > > > On Thu, 7 Mar 2002, Robb Kambic wrote:
> > > > >
> > > > > > On Thu, 7 Mar 2002, Unidata Support wrote:
> > > > > >
> > > > > > >
> > > > > > >
> > > > > > > >Subject: Re: 20020305: FW: Unidata Community Portal Feedback
> > > > > > > >Organization: UCAR/Unidata
> > > > > > > >Keywords: 200203071345.g27DjCK09529
> > > > > > >
> > > > > > > I have now read all of the online data for the ldm and have a
> > > > > > > question concerning my site configuration:
> > > > > > >
> > > > > > > i am paying for a wsi feed (nexrad) which comes to me via a das 
> > > > > > > (data
> > > > > > > acquisition system) which is a satellite uplink on my roof and a 
> > > > > > > hp box
> > > > > > > running solaris 5.? (im away from the computer and can't recall 
> > > > > > > exact
> > > > > > > version number)  I would like to run an ldm on the solaris box 
> > > > > > > and send
> > > > > > > the data to a downstream redhat 7.2 box on my private network for 
> > > > > > > viewing
> > > > > > > with gempak.  The question is...how do I configure the ldm to 
> > > > > > > grab the
> > > > > > > data from a local source like what will be happening in my case?  
> > > > > > > Are
> > > > > >
> > > > > >
> > > > > > Lappin,
> > > > > >
> > > > > > I depends if your WSI system was set up using the LDM software? If 
> > > > > > that's
> > > > > > the case, then all one would have to do is to configure the LDM to 
> > > > > > permit
> > > > > > the remote machines to obtain the data. The remote machine would 
> > > > > > have to
> > > > > > run an LDM and then request the data from the WSI machine. The 
> > > > > > usual LDM
> > > > > > configuration is to place the LDM s/w in /opt/ldm.
> > > > > >
> > > > > > To permit the remote machines to get the data an ALLOW line needs 
> > > > > > to be
> > > > > > entered in the etc/ldmd.conf file. Then a request line needs to be 
> > > > > > entered
> > > > > > into the remote machines etc/ldmd.conf file.  The details of these
> > > > > > commands are located at:
> > > > > >
> > > > > > http://www.unidata.ucar.edu/packages/ldm/workshop2001/Config_server.html#s1
> > > > > >
> > > > > >
> > > > > > Once we have determine your environment, I can give you the details
> > > > > > that need to be done to get your configuration setup.
> > > > > >
> > > > > > Robb....
> > > > > >
> > > > > >
> > > > > > > there any preexisting scripts to handle this?...i've searched the 
> > > > > > > support
> > > > > > > databases and didn't find anything helpful...any ideas?
> > > > > > > any help is GREATLY appreciated.
> > > > > > > Lappin Hammond
> > > > > > >
> > > > > > >
> > > > > >
> > > > > > ===============================================================================
> > > > > > Robb Kambic                            Unidata Program Center
> > > > > > Software Engineer III                          Univ. Corp for 
> > > > > > Atmospheric Research
> > > > > > address@hidden                 WWW: http://www.unidata.ucar.edu/
> > > > > > ===============================================================================
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > > ===============================================================================
> > > > Robb Kambic                                Unidata Program Center
> > > > Software Engineer III                      Univ. Corp for Atmospheric 
> > > > Research
> > > > address@hidden             WWW: http://www.unidata.ucar.edu/
> > > > ===============================================================================
> > > >
> > > >
> > >
> > >
> >
> >
> >
>