[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

20000926: Download instructions

Leigh,

Since your department is licensed for the Unidata suite of applications
and data, you may download the software and updates at your
convenience.

---------------------------------------------------------------------
The information you need to download gempak is:
host: ftp.unidata.ucar.edu
login: gbuddy
passwd: XXXXXX

Please record the above information for your records.

Here are the general source download and building instructions. If
you are running Solaris x86 or Linux, you can download binary distributions
for these platforms. In particular, GEMPAK requires Motif which is not
part of Linux (must be purchased separately), so you would likely
need to download the binary distribution.

The source distribution for building is found under
~gbuddy/nawips-5.4/gempak54upc_pl17.tar.gz

The current tar file is patched through patch level 17.

To build Gempak from source, download and unpack the distribution into
a clean directory. Edit the csh file Gemenviron in the top directory
and define the NAWIPS environmental variable to be the directory you
unpacked into. Source the Gemenviron variables into your csh
environment to define $NAWIPS and all the tree locations relative to
NAWIPS. Then, if your system is standard configuration for Solaris,
Solaris for Intel (X86) IRIX, OSF/1, AIX, Linux, HPUX- you should be able 
to just type "make all", followed by "make install" when the compilation 
finishes. 
If you have libraries in non-standard places, then the 
$NAWIPS/config/Makeinc.xxxxx
file for your OS would have to be modified. You should not modify the 
optimization levels since some compilers don't work well with aggressive
optimization (Especially Digital UNIX).

Documentation for GEMAPK can be found as postscript files under
the $NAWIPS/doc/User_Guide directory, as well as online at:
http://www.unidata.ucar.edu/packages/gempak/tutorial/

All users that use Gempak should source Gemenviron into their csh
environment to define the Gempak variables and add the executable
directory into their path. Once the distribution is installed,
you can edit the data directory locations defined in Gemenviron-
but thats not a priority for building.

Plese refer all questions about the distribution and any problems
you may have to address@hidden. You may also wish to
subscribe yourself to the gembud email list at:
http://www.unidata.ucar.edu/mailinglist/mailing-list-form.html

Announcements about the GEMPAK distribution, including new distributions,
patches, and feature enhancements are made through that list. Also,
if you have information or need to find other users who may have
experience with a specific data set, then you are encouraged to
use the email list which is composed of fellow GEMPAK users in our community.

Once you have GEMPAK installed, you can use the "dc" realtime data decoders
with the LDM package to decode the data into GEMPAK format as it arrives
at your site. Refer to the LDM web pages for the installation of LDM and
getting connected to the IDD. Examples of LDM pqact.cont pattern/action entries 
for 
the various types of data for the GEMPAK decoders are found in the tutorial
as well as in the Examples section of the GEMPAK www pages.


>> Since you mentioned that you would like to explore a Linux binary,
here are the basic installation steps for that.


In the gempak ftp account, you will find the Linux binary tarfile under:
nawips-5.4/binary/linux/gempak5.4_pl17_linux.tar.gz

You don't need the gempak5.4_pl17_libs.tar.gz tar file, unless you were writing
your own programs to access the GEMPAK libraries.

Once you download the tarfile, unpack it in an empty directory, typically
/home/gempak/NAWIPS-5.4 with the command:
gunzip -c gempak5.4_pl17_linux.tar.gz | tar xvf -

Once you have unpacked the tarfile, edit the Gemenviron file and modify
the directory specified by the NAWIPS environmental variable to
the directory name that you unpacked the distribution in (if it is
different than I suggested).

The Gemenviron file contains csh environmental variables which should be
used by any account that wishes to run GEMPAK. After you have edited 
Gemenviron, source the contents into your csh environment with the command:
source Gemenviron

Typically, you will want to add this command to your .cshrc file
(using the appropriate path to Gemenviron).

All the GEMPAK data executables are found in the $GEMEXE executable directory.
Sourcing the Gemenviron script will add the $GEMEXE directory to your
current path.

The pqact.conf examples for the decoders typically need
to find ancillary station and packing tables from the
GEMPAK distribution. You should ensure that these paths are correctly
set for where you installed the GEMPAK tarfile on your system.
I usually copy the $GEMEXE/dc* programs into ~ldm/decoders for
convenience- and to make upgrading the GEMPAK distribution easier.

The NWX patterns for pqact.conf are just FILE actions and so decoders
are not needed, except for the entries that use the ldmConnect perl script 
from the ~ftp/pub/decoders/decoders.tar.Z distribution. This perl script 
joins together bulletins that are transmitted in several pieces.


Steve Chiswell
Unidata User Support


>From: Leigh Orf <address@hidden>
>Organization: Department of Tesselating Kumquats
>Keywords: 200009261810.e8QIA5b06037

>
>Hello,
>
>Here is my license application for obtaining Gempak. I am a new faculty
>member at UNCA in the Dept. of Atmospheric Sciences. We are a UNIDATA
>licensed site already.  Alex Huang is the current contact here. I am
>wanting to obtain the latest version of Gempak; we have not used it for
>years.  If it is easier to have Alex submit this application, let me
>know; I just wanna be able to get into your ftp site :)
>
>Also, please make me the software email contact (Jim Heimbach is no
>longer here). My email is address@hidden, and my phone number is
>828 232 5159
>
>--------------------------------------------------------------------
>
>Unidata GEMPAK License Application
>
>Below you will find an application for a GEMPAK license from
>Unidata. Unidata will license any U.S. college or university for GEMPAK
>at no charge. Please fill out the information below and return it to
>address@hidden.
>
>
>Unidata Product Licensing Form: 911205
>
>Institution:  University of North Carolina - Asheville
>
>Department: Atmospheric Sciences
>
>Mailing address: CPO #2450
>                 One University Heights
>                 Asheville, NC 28804-8511
>
>Contact name:  Dr. Leigh Orf
>
>Phone number(s): 828 232-5159
>
>Email address:  address@hidden
>
>Contract officer:  ?
>
>Phone number(s): 
>
>Product & Rev #: GEMPAK 5.4 
>
>Machine and operating system: 
>
>I would like to obtain binaries for both a Red Hat Linux machine
>running RH 6.2 (soon to be 7.0) with a Pentium II 300 MHz processor,
>and a sun Sparc. Output from the sparc:
>vortex[430]:/home/orf% uname -a
>SunOS vortex 5.7 Generic_106541-08 sun4u sparc SUNW,Ultra-2
>
>I want to play around on both architectures to see which one works
>best for us.
>
>Thanks,
>
>Leigh Orf
>